Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.3 LAccepted-AOC CHANDPURA TIKAMGARH DIST TIKAMGARH MP | TIKAMGARH | TIKAMGARH | MADHYA PRADESH | L1 | Accepted-AOC OK | |
| 2 | L2₹8.8 L+₹1.2 L (16.3%)Rejected-AOC | L2 | Rejected-AOC OK |
Tender Value
₹7 L
EMD Value
₹14,000
Closing Date
15 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF Bhisiana
HQ CWE AF BHISIANA
CWE(BHI)/BHI-19/2022-23
2022_MES_532287_4
CWE(BHI)/BHI-19/2022-23
Open Tender
Civil Works
Item Rate
180 days
AF STN BHISIANA
AS PER COVER 1
6 documents required · 6 mandatory
₹500
Yes
GE AF Bhisiana
₹14,000
Yes
25 Jan 2023
25 Nov 2022
17 Dec 2022
25 Nov 2022
15 Dec 2022
3 Dec 2022
25 Nov 2022 - 1 Dec 2022
Amount
Taking down electric motor 05 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing both side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.
M&L for Replacement of U/S ball / roller bearing of above motor bearing of existing make with providing of high grade grease
M&L for opening pump set split case monoblock /Centrifugal pump type coupled to electric motor of capacity 5 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works all as specified.
Supply only spare parts for as above No 03 for replacing vide item above as follows:-
Supply only pump shaft sleeve made out of gun metal
Supply only key for main shaft
Supply only check nut
Supply only water seal
Supply only pump Shaft
Supply ball/roller bearing complete
Supplu only Impeller Cast iron
M&L for dismantling Submersible pump set 5 HP 3 phase 415 V from borewll along witth colum pipe using lifting crane or suitbale equipmment to lift out submersible pump from borewell and after isolating the electric and earth lead connections, suction and delivery pipes etc opening the pump set, motor rotor and stator etc for repair/overhauling including replacing the unserviceable parts and jointing of new submersible canle given in schdeule with new items given vide item No given below and reassemblying the pumpset and reinstalling on foundation frame connecting, testing and commissioning complete all as specified.
Supply only spare parts for pump set of capacity 5 HP vide item No 05 above as follows:-
Supply only key for main shaft
Supply only check nut
Supply only impeller any matrial
Supply only water seal
Supply only submersible bearing complete
M & L for Rewinding of pump motor 415 Volt 3 phase after disconnecting electric cable and eath lead, suction and delivery pipes, from 09 mtre depth of sewage well or pump house or any location directed by Engr-in-Charge shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator and Rotar cleaning the stator slots and core assembly, rewinding to stator and rotar with suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning complete in all respect all as specified and as directed by Engr-in-charge for the following capacity: -
M&L for supply, install, testing and commissioning of level dosing pump/injector aqafit/Supreme/Earth Water techonology or equivalent max pressure 07kg/cm square and max flow rate 17 ltr/Hr including all accessories such as Lead tubing, Connecting Ferrules, Check valves all as directed. The cost shall be included suitable foundation/stand to installation of dosing pump on treated water sump.
M&L for preperation tank Aquafit/Supreme/Earth water techonology or equivalent Model No VST 1005 or equivalent of net capacity FRP dosing tank dia 650mm x net hight 375mm + Conical 300mm. Gross height with stand 1000 mm consisting of following. Note : The cost shall be included suitable foundation / stand to installation of dosing preparation tank on treated water sump, Water inlet line, OUtlet with 'Y' Strainer, Drain Pipe/Over Flor Pipe, Connecting Bottom for sludge deposition, Pot Hole Cover, Agitator 120 Watt, 900 RPM single phase flage mounted motor with shaft and impeller, Water inlet line, Outer with Strainer, Drain Pipe/Over Flow Pipe.
M&L for service tank Aquafit/Supreme/Earth water techonology or Model (No VST 1006 or equivalent) of net capacity 100 ltr of FRP dosing tank top dia 540 mmx bottom dia 480 mm x height 575 mm consisting of. The cost shall be included suitable foundation/stand to installation of dosing service tank on treated water sump, Water Inlet Line, Outlet with 'Y' Strainer, Drain Pipe/Over Flow Pipe, Agitator 120 Watt, 900 RPM single phase flange mounted motor with plastic shaft and impeller, Provision of mounting pump on lid/Wall/Agitator/Impeller with accessories Mode No. HSN-Code 84798200 or equivalent including all accessories.
S&F cable of size 1.5 sqmm and Supply flexible cable 1.5 sqmm 3core PVC insulated and sheathed submersible type with stranded copper conductor for Dosing Pump
Material and labour for fabrication for temporary shader of flate plate and fix framed work such as grills, gratings etc, with ends of bars shoulderd and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders , framed balusters, walk ways, railing, framework of water tanks , Bar protection of bolard light and similar work conforming to FE ,290. GDE E-165
M&L for taking down U/S GI tubing and connection 40/50 mm size Note :- The cost of excavation, earth work shall be inclusive.
M&L for taking down U/S GI tubing and connection 25 mm size. Note :- The cost of excavation, earth work shall be inclusive.
M&L for taking or down U/S GI tubing and connection 20 mm size. Note :- The cost of excavation, earth work shall be inclusive.
Taking up or down U/S CI/DI pipe 80 mm dia including all fitting and connection Note The cast of including all excavation earth work
Taking down U/S CI/DI/GI pipe 100 mm dia including all fitting and connection Note The cast of including all excavation earth work
Taking down U/S CI/DI pipe 150 mm dia including all fitting and connection Note The cast of including all excavation earth work
Supply and laying of GI pipe of 80 mm dia including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead all as specified and as directed
Supply and lay 50 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches
Supply and laying 40 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches.
Supply and laying 25 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in trenches/wall and ceilin or laid in floors
Supply and laying 20 mm bores of tubes 'medium grade' galvanised with all fittings and fixed complete laid in wall and ceiling or laid in floors
Supplying, laying, jointing and testing DI pipe "K-7" ISI marked150mm dia. Socket and spigot push fit tighten joints in trenches, complete all as specified and as directed.
Supplying, laying, jointing and testing DI pipe "K-7" ISI marked100mm dia. Socket and spigot push fit tighten joints in trenches, complete all as specified and as directed.
M & L for CI fittings for Spigot & Socketed pipe as bends, tapers, tee pieces any type angle/radius and straight connection pieces etc upto 150 mm dia pipe as in repair etc. complete all as specified and as directed.
Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 100 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 100 mm all as specified and as directed by Eng-in-Charge Make: ISI MARK
Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6conforming to IS of size 150 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 50 mm all as specified and as directed by Eng-in-Charge Make: ISI MARK
S & F in replacement of Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 40 mm bore iron pipe and fixed including testing, complete all as specified and as directed.
S & F in replacement of Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 25mm bore iron pipe and fixed including testing, complete all as specified and as directed.
S & F in replacement of Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 20 mm bore iron pipe and fixed including testing, complete all as specified and as directed.
S & F in replacement of Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 20 mm bore iron pipe and fixed including testing, complete all as specified and as directed.
M&L in replacement of brick masonary valve pit (type B) of size 1m x 1m x 1 m (internal of chember ) depth of chember to be reckoned from the top of PCC in foundation to top the MS cover as 1.5 mtr and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of angle iron 40 mm x 40 mm 6 mm with fixing arrangement , hinges and locking arrangement and painting two coat of synethetic enamel paint over a coat of red oxide primer on MS cover and frame , inlcuding necessary excavation and earth work in any type of soil , returning , filling in approved soil disposal of surplus soil to a distance not exc.50 mtr , 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation , brick work in cement motor (1:6) 15 mm thick plastering in cement mortoar (1:4) (both internally and externally) 100 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in flooring, complete all as specified and as directed.
M&L for brick masonary valve pit (type B) of size 75x 75 x 75 cm (internal of chember ) depth of chember to be reckoned from the top of PCC in foundation to top the MS cover as 1.5 mtr and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of angle iron 40 mm x 40 mm 6 mm with fixing arrangement , hinges and locking arrangement and painting two coat of synethetic enamel paint over a coat of red oxide primer on MS cover and frame , inlcuding necessary excavation and earth work in any type of soil , returning , filling in approved soil disposal of surplus soil to a distance not exc.50 mtr , 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation , brick work in cement motor (1:6) 15 mm thick plastering in cement mortoar (1:4) (both internally and externally) 100 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in flooring complete all as directed.
M&L for brick masonary valve pit (type B) of size 60 x 60 x 60 cm (internal of chember ) depth of chember to be reckoned from the top of PCC in foundation to top the MS cover as 0.60 mtr and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of angle iron 40 mm x 40 mm 6 mm with fixing arrangement , hinges and locking arrangement and painting two coat of synethetic enamel paint over a coat of red oxide primer on MS cover and frame , inlcuding necessary excavation and earth work in any type of soil , returning , filling in approved soil disposal of surplus soil to a distance not exc.50 mtr , 150 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation , brick work in cement motor (1:6) 15 mm thick plastering in cement mortoar (1:4) (both internally and externally) 100 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in flooring, complete all as specified and as directed.
M&L for painting of Centri fugal pumps with motor alongwith 10 mtr pipe suction/ deivery of capacity 5 HP with two coats of synthetic enamel Paint complete all as specified and as directed.
M& L for cleaning of RCC Under ground tank reservoir up to 25000 gallon capacity by drain out the contaminated muddy water from bottom surfaces of the tank by using of pump and motor and cleaning the inside and bottom surfaces of walls with help of wire brush and using specified dosage of Potassium permanganate and cleaned water than drain out completely material to the entire satisfaction of Engr in Charge with and including writting letters 5 CM height capacity of Tank and date of Cleaning of tank , with synthectic enamel paint on the other surface of the tank, complete all as specified and as directed.
M&L for cleaning of overhead water reservoir 25000 gallon capacity on 25 metre staging by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching power and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including Lime washing inside the tank the capacity of sump and date of cleaning with white paint over black painted surface complete in all in as specified and directed.
Taking out U/S & M&L for run lead joints for 150mm dia spigot and socketed CI pipe fittings including spun yarn including taking down unservicable pipe and fitting complete all as specified and directed.
M & L for excavation in trenches, not exc 1.5 m wide and not exc. 1.5 m in depth for foundation and getting out hard/dense soil all as specified and as directed.
M & L for returning filling in including spreading, levelling, watering and ramming in layers not exceeding 25 cm thick with earth obtained from excavation all as specified and directed.
M & L for removal of surplus soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and as directed.
Supply and replacing set of fuel pre- filters and fine -filters as per sample and make for 62.5 KVA capacity of DG sets. Each set shall be comprising complete set of pre and fine filters, complete all as specified and as directed.
Supply and replacing set of fuel pre- filters and fine -filters as per sample and make for 20 KVA capacity of DG sets. Each set shall be comprising complete set of pre and fine filters, complete all as specified and as directed.
Supply and replacing Air filters as per sample and make for 62.5 KVA capacity of DG Set. Each shall be comprising complete set of air filters, complete all as specified and as directed.
Supply and replacing Air filters as per sample and make for 20 KVA capacity of DG Set. Each shall be comprising complete set of air filters, complete all as specified and as directed.
Supply and replace set of lube / engine oil filters as per sample and make for the following capacities of DG sets.
Material and labour for descaling and servicing the radiator of DG set 62.5 KVA internally and externally by using chemicals, including soldering the copper tubes and tank etc for arresting leakage, complete all as specified and as directed.
Material and labour for descaling and servicing the radiator of DG set 20 KVA internally and externally by using chemicals, including soldering the copper tubes and tank etc for arresting leakage, complete all as specified and as directed.
Material and labour for Drain the out lived engine oil, clean the oil tank and filling the new engine oil grade 20W 40 as required, complete all as specified and as directed.
Supply and filling coolent, complete all as specified and as directed.
Supply and fixing in replacement of battery lead of copper conductor PVC insulated multi strand heavy duty , 1.25 Mtr long (two Nos) duly fixed with brass terminals and lugs, complete all as specified and as directed.
Supply and fix in replacement of generator door hinges metal type with nut bolts or screws for DG set any make any type, complete all as specified and as directed.
Supply and fixing in replacement indicator lamps AC 230 V, LED type for the panel boards, complete all as specified and as directed.
Supply and fixing in replacement under/over voltage relay input voltage 110-220 V AC suitable for AMF panel, complete all as specified and as directed.
Supply and fixing in replacement engine starting relay DC 12V suitable for AMF panel, complete all as specified and as directed.
Supply and fixing in replacement 8 pin relay Base Socket voltage range DC voltage 12 V to 24 V and AC voltage 230 V to 440V suitable for AMF panel, complete all as specified and as directed.
Supply and fixing in replacement contact element NO-NC suitable for AMF panel complete all as specified and as directed.
Supply and fixing in replacement green colour Actuator Push button with complete set suitable for AMF panel, complete all as specified and as directed.
Supply and fixing in replacement Red colour Actuator Push button with complete set suitable for AMF panel, complete all as specified and as directed.
Supply and fixing in replacement Automotive relay, 12 VDC, 50 Amp power relay quick connected with complete set suitable for AMF panel, complete all as specified and as directed.
Supply and fixing in replacement Ameter of range as required for the Gen/ AMF panel, complete all as specified and as directed.
Supply and fixing in replacement Volt meter 0 to 600 V range suitable for the Gen/ AMF panel, complete all as specified and as directed.
Supply and fixing in replacement 3 pole power contactor 55 A, type MNX 40 CAT No. CS94190, complete all as specified and as directed.
Supply and fixing Battery Charger of capacity 12V suitable for AMF Panel, complete all as specified and as directed.
M&L for repairing the self starter 12 Volts after removing from the Gen set of any capacity and transporting to an authorised sevice centre and back, complete all as specified and as directed.
Supply and fixing in replacement heavy duty battery terminals, heavy duty brass forged with nuts and bolts, complete all as specified and as directed.
Supply and fix in replacement fuel pipe filter to FIP wire braided complete all as specified and as directed.
Supply and fix in replacement fuel pipe upto 15 mm size from fuel tank to the DG set & over flow return, complete all as specified and as directed.
HARSH CONSTRUCTION CO.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .