SPL REPAIR TO BLDG NO OR 22 OF INF BN AT SALT LAKE UNDER GE NORTH KOLKATA

Amount

Taking down/ dismantling loose/ damaged concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling, louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.

M&L for cleaning the existing surface of concrete and reinforcements as obtained after demolition/ dismantling of loose/ damaged concrete by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new concrete complete all as specified and as directed. Note: Solvent free epoxy concrete bonding agent shall be measured and paid separately.

Applying two coats of “Epoxy zinc rich primer” as protective coat to expose surface of old and new reinforcement over 10 mm dia as per manufacturer's instructions complete all as specified and directed.

All as per item No. 3 above but reinforcement upto 10mm dia complete all as specified and directed. Note for item No 2 to 4: (i) Cost of chemical i.e. Solvant free epoxy, Epoxy zinc rich primer and cement shall be measured and paid separately under appropriate item here in below. (ii) The work shall be carried out by the trained person as per manufacturer's instructions (i.e) FOSROC/SIKA/ PIDILITE

Supply only epoxy zinc rich primer complete all as specified and directed. Make : Nitozinc primer of FOSROC/Friazinc R of SIKA/ or equivalent in PIDILITE

Supply only Solvent free Epoxy concrete bonding agent complete all as specified and directed. Make : Nitobond EP of FOSROC/Carbodur of SIKA/ or equivalent in PIDILITE

Material and labour for providing and placing in position free flow non shrink cementious micro concrete of grade M-50 to the effected beam column etc. The micro concrete shall have a minimum 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minimum tensile strength of 5 Mpa @ 28 days, minimum flexural strength of 5 Mpa @ 28 days complete all as specified and directed.

Supply, mixing and application of two component structural grade polymer modified reinstatement mortar where local spalling has taken place or shuttering is not possible. The mortar can be applyied in layers not exceeding 6 mm thick in each layers in and up to any thickness in smaller vertical pockets and up to any thickness in smaller in horizontal application . The mortar should have a minimum compressive strength of 12 Mpa in 1 days and 45 Mpa in 28 days . Minimum flexural strength should be 8 Mpa in 28 days. A modified styrene butadiene emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/ bag of cement. The bonding agent should have minimum compressive strength of 24 Mpa, minimum tensile strength of 3.5 Mpa, minimum flexural strength of 6.05 Mpa complete all as specified and directed up to 25 mm average thickness.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for TMT bars upto 10mm dia as in stirrups cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed.

Material and labour for providing reinforced cement concrete (1:1½: 3) type A1 (using 20mm graded stone aggregate) as in chajja, facia, railing and parapet complete all as specified and as directed. Note: Reinforcement and Formwork shall be measured and paid separately.

Material and labour for providing reinforced cement concrete (1:1½: 3) type A0 (using 12.5mm graded stone aggregate) mixed with integral water proofing liquid admixture as per manufactures instructions as in columns, pillars, piers, posts and struts complete all as specified and as directed. Note: Reinforcement and Formwork shall be measured and paid separately.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.

M&L for use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed.

M&L for use and waste of formwork to sides and soffits of chajja, troughs etc for rough finished concrete surfaces complete all as specified and as directed.

Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finishing the surface even and fair without using extra cement complete all as specified and as directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing liquid admixture for concrete and mortar (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

All as per item No. 22 above but in ceiling complete all as specified and as directed.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for 40mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) and finishing the surface even and smooth without using extra cement in floor all as specified and directed.

Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.11 Sqm but not exce 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles complete all as specified and directed.

Material and labour for glazed ceramic colour tiles 300x450x7mm thick as in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking plateforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite ,complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded aggregate) as in pavement/ plinth protection, plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) surface finished fair and even complete all as specified and as directed.

Supply and fix in repair one pieced-white wash basin with pedestal (550 X 400) mm (oval/ square pan) a/w brackets / MS nuts and bolts for fixing, fixed with and including 32mm dia brass CP waste coupling and connection to waste pipe etc complete all as specified and directed.

Supply and fix in repair 15mm PVC connection of length 600mm with PTMT nuts of superior quality complete all as specified and directed.

Supply and fix in repair fancy type chromium plated pillar taps 15mm bore, of cast copper alloy, with long screwed shanks & screwed for iron pipe or for connection pipe complete all as specified and directed.

Supply and fix in repair angular stop cock of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

Supply and fix in repair vitreous China squatting pan, ‘Orissa’ pattern, size (580 x 440) mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm complete all as specified and directed.

S & F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr Capacity, hoisted and fixed in position complete all as specified and as directed.

Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed.

All as per item No. 39 above but 20mm bore complete all as specified and as directed.

Supply and fix 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm sq fixed to walls , ceiling or in floors etc complete all as specified and directed.

All as per item No 41 above but 20 mm outer dia complete all as specified and as directed.

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix in repair stop cock concealed type of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

Supply and fix in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed.

Supply and fix in repair brass chromium plated shower rose of 125mm size fixed in 15 mm dia pipe all as specified and directed.

Suply and fix in repairs stainless steel sink single bowl made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 495x420 mm with bowl size 410x330x160mm complete all as specified and as directed .

Supply and fix in repair stainless steel kitchen Plate Rack of size 36''x36''x10'' complete all as specified and as directed.

Supply and fix in repair PVC Multi Utility Mirror Cabinets of size 355mmx455mm complete all as specified and as directed. (Make : Polytuf or eqvt)

Supply and fix in repair chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Refixing of shutters of any description exceeding 1 Sqm each and not exceeding 2 Sqm with old serviceable builders hard ware articles / with new builders hard ware articles if any. (Old serviceable shutter obtained from item No 53 above shall be reused).

Materials and labour for treating back of chowkhats etc with tar or coal tar black paint, area tarred exceeding 0.10 sqm but not exceeding 0.50 sqm each complete all as specified and as directed.

Supply and fix 2nd class hard wood , plain, solid , straight chowkats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 35mm thick 2nd class Hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary formwork complete all as specified & directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Taking down old unservicebale steel window shutter of any description and size complete all as specified and as directed.

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators(including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fix sliding powder coated anodised aluminium window shutters for gauged , aluminium section weighing 0.55kg/m including necessary joining cleats, roller rubber neoprene packing/gusket,etc complete all as specified and directed.(Note- Glass shall be measured and paid separately)

Supply and fix sliding powder coated anodised aluminium window shutters for glazed , aluminium section weighing 0.55kg/m including necessary aluminium channel, aluminium screw as required etc complete all as specified and as directed(Note - Wiremesh shall abe measured and paid separately)

S&F powder coated anodised aluminium window ( glazed or gauged) and ventilator shutters, openable type without sash bar, aluminim section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

Supply and fix 3mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to steel frame complete all as specified and as directed.

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

Supply, fabrication and fixing in repair with premium plus High Density Moisture Resistant (HDMR) premium board ,one side decorative lamination and other side balancing white,100% termite proof,18mm thick heavy density,exterior grade cutting, fabricating and suitable fixing for kitchen cabinets and shelves of any size darwers openable leaf complete including fixing only accessories such as Italian stainless steel hinges, handles, magnets as required etc complete all as specified and directed as under:- (a) Stainless steel handle fancy type 100mm size. (b) Stainless steel hinge Italian pattern suitable for cabinet and shelves opening/closing operation. (c) Magnet of suitable size fixed for cabinet leafs, drawers. Make: Century Ply board . Note :- The rate includes BWP Ply board and all connecting items mentioned above and the design and pattern should be approved by GE.

Supply only stainless steel handle fancy type 100mm size and complete all as specified and directed.

Supply only stainless steel hinge Italian pattern suitable for cabinet and shelves opening/closing operation and complete all as specified and directed.

Supply only magnet catchers suitable size for cabinet leafs and drawers and complete all as specified and directed.

Material and labour for cementitious grouts mixed with admixture around water spouts, CI pipes / PVC pipes of any dia complete all as specified and as directed. (Make : Cebex 100 of Fosroc/Intraplast EP of SIKA/ or equivalent brand of PIDILITE)

Supply and fix in repair of towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

Supply and fix in repair PVC (SWR) pipe 110 mm bore,single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.

Supply and fix in repair PVC(SWR) bend 110 mm dia complete all as specified and directed.

Supply and fix in repair PVC (SWR)branch piece, single T equal or unequal 110 mm dia complete all as specified and directed.

Dismantling cast iron drain pipes jointed in cement mortar obtained either from trenches/wall as required complete all as specified and as directed. (Note : Excavation if required, shall be measured and paid separately)

Supply and fix 100mm bore cast iron spun pipe soil, waste and vent pipes in any length with or without ears, with lead joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 100mm bore cast iron spun pipes soil, waste and vent pipes in any length with or without ears, with lead joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix in repairs 75mm bore cast iron spun pipes soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

Supply and fix 100mm bore cast iron spun branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fix 100mm bore cast iron spun cowls complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brickwork with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius in half brick thick wall built in CM (1:4) complete all as specified and directed.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of wall by Vaccum based sanding machine, removal of nails etc & filling cracks/hole with putty, and applying two coats of Anti Fungal paint white or coloured by Auto Roller over a coat of primer, including necessary scafoldings complete all as specified and as directed as per manufacturers instructions.

Material and labour for preparation of newly plastred surfaces of wall by vaccum based sanding machine, and applying two coats of Anti Fungal paint white or coloured by Auto Roller over a coat of primer, including necessary scaffoldings complete all as specified and as directed as per manufacturers instructions.

Material and labour for applying two coat of synthetic enamal paint to wooden surface exceeding 10cm width or girth including preparation of old painted wooden surfaces complete all as specified and as directed.

Material and labour for applying two coat of synthetic enamal paint on steel surface of any description over 10cm widht or girth including preparation of old painted surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment of wall including washing, rubbing down and stopping of old treatement and material and labour for applying 1mm birla wall care putty and appling two coats of oil bound distemper over a coat of alkali resistant primer to wall complete all as specified and as directed.

M&L for applying not less than 1 mm wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed.

Material and labour for preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed.

All as per item No.103 above but in ceiling complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer to new steel surface, not otherwise described, over 10cm width or girth including preparation of new surface complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.

Taking down pelmet boxes and supply & fix Decorative /Fency type curtain rods of not length not exceeding 1.25 m of Aluminium /brass alloy suitable of 20 mm dia alongwith fancy brackets and necy fixtures complete all as specified and directed

Taking down pelmet boxes and supply & fix Decorative /Fency type curtain rods of not length exceeding 1.25 m but not exceeding 2.0 m of Aluminium /brass alloy suitable of 20 mm dia alongwith fancy brackets and necy fixtures complete all as specified and directed

M&L for 75mm thick Cement concrete (1:4:8) Type D2 (40 mm graded graded aggregate) as in floor finishes and pavings complete all as specified and as directed.

Material and labour for 300x300 x25 mm thick PCC designer Pre-polished tiles (Factory make and approved size) as in floors, set & jointed in neat cement slurry and pointed in coloured cement with pigment over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Demolition of reinforced concrete of any description & in any position complete all as specified and as directed.

M&L for providing precast cement concrete type B1 (1:2:4) (using 20 mm graded aggregate) as in manhole cover set in cement mortar (1:4) complete all as specified and directed.

Supply and fix pre-painted galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 Mpa (Galvalume base-PPGL trapezoidal profile sheets) fixed with aluminium self tapping screws of size 50/75mm and aluminium washer of suitable size in roof covering complete all as specified and as directed.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, Gate ,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work complete all as specified and as directed.

Material and labour for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and reqired to give high gloss finish with bul noising including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for machine cut kota stone slab for skerting 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and reqired to give high gloss finish including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (light, fan, call bell, socket or power) complete, including fittings and fixtures such as switches, ceiling rose, pendants, holders, regulators, sockets, light fitting etc. & removing from site and making good the disturbed surfaces of wall, ceiling etc. complete all as specified and directed.

Material and labour for point wiring (concealed type) with PVC insulated FRLSH(Fire retardant low smoke halogen) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way modular switch complete all as specified as directed. Note : The quoted rate is deemed to be inclusive of rates for chases cutting and making good to disturbed surface.

All as per item No 118 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches complete all as specified and as directed.

All as per item No 118 above but for one 3/5 pin 6 Amps socket outlet on the independent board complete all as specified and as directed.

All as per item No 118 above but for One call bell point controlled by one bell push switch complete all as specified as directed.

All as per item No 118 above but for one light point controlled by two 2 way modular switch complete all as specified as directed.

Material and labour for point wiring (Concealed type) with FRLSH PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified as directed. Note : The quoted rate shall be deemed to be including rates for chases cutting and making good to disturbed surface.

Supply and fix modular switch 1 way, 6 A, 1 module complete all as specified and as directed.

Supply and fix modular switch 1 way, 16A, 1 module complete all as specified and as directed.

Supply and fix socket 6A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fix socket 6A/16A, 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fix modular switch 2 way, 6 A, 1 module complete all as specified and as directed.

Supply & Fix Bell push switch designer modular type 1 module complete all as specified and as directed.

Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and as directed.

Supply and fix in repairs call bell, AC, 230 volt, single pole complete all as specified and as directed.

Supply and fix modular type electronic fan regulator stepped type flush type AC 240 volt complete all as specified and as directed. .

Material and labour for sub-main wiring (Concealed type) with FRLS two run of PVC insulated, unsheathed, single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including taking down old sub main wiring with conduit as specified and as directed. (Note: Three run of 6.0sqmm copper conductor+One run PVC conduit shall measured as one unit i.e RM Note : Chases cutting and making good to disturbed surface shall be measured and paid separately.

Supply and fix of 4 way vertical type TPN DB in double door suitable for four pole MCCB as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed. Note:- MCCB shall be measured and paid seperatly.

Supply and fix MCCB four pole 63 amps, 415 volts, 16 KA, with all incoming / outgoing connections suitable for fix 4 way vertical type TPN DB in double door twith proper size of aluminium lugs complete all as specified as directed.

Supply and fix powder coated sheet metal enclosure single pole & neutral for DBs (Double door) 8 way with 200 amps rated busbar DIN channel, neutral link & earth link superline including taking down old unserviceable enclosure one complete all as specified as directed.

Supply and fix MCB single pole & neutral 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed.

S&F LED tube light fitting, 1 x 18 watt, 4 feet, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible cable copper conductor including taking down old unserviceable light fitting complete all as specified and directed.

S&F LED tube light fitting, 1 x 10 watt, 2 feet, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible cable copper conductor including taking down old unserviceable light fitting complete all as specified and directed.

Supply and fix LED building security light fitting 25 watt energy saving versatile pressure die-cast aluminium IP65 building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete including taking down old unserviceable light fitting complete all as specified and directed.

Supply and fix LED bulb two pin (Base type B22) 7 watt complete all as specified and as directed.

Taking down of ceiling fans of 1200/ 1400mm sweep & refixing safely alongwith its connected accessories like fan hook, clamps, fateners etc. safely complete all as specified and as directed.

Taking down of Exhaust fans of 300mm sweep & refixing safely alongwith its connected accessories like fan motor, louvers,clamps, fateners etc. safely complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.

Supply and fix electric water heater,storage type steel body with copper inner tank and heating elment upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed.

M&L for chases cutting in brick/ stone/ concrete surfaces girth, exc. 10cm and not exc. 20cm for concealed wiring and the like, making the surface good to match the existing in CM (1:3) etc. complete all as specified and directed.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I including taking down old earthing complete all as specified as directed.

Supply and fix GI wire as earth continuity conductor including taking down old unserviceable earth wire compleate all as specified and as directed.

Supply and fix GI pipe 15 mm bore (dia), light-grade for protection of earth electrode including taking down old unserviceable GI pipe complete all as specified and as directed.

Supply and fixing of 40 mm bore GI tubing, medium grade with all new fittings as required complete fixed to walls and ceilings or laid in floors including taking down old unserviceable GI pipes & testing complete all as specified and directed.

Supply and fix 40mm bore gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe and fixed including taking down old unserviceable gate valve complete all as specified and as directed.

NANDYENTERPRISES (BID ID -3109965)

The Planters Engineering Corporation (BID ID -3109987)

JHAWAR SUPPLIERS (BID ID -3112690)

RADHA ENTERPRISE (BID ID -3106129)

Friends Trading Co (BID ID -3111745)

M/s Anil Kumar Dutta (BID ID -3105389)

ELECTRO COMMERCIAL CO (BID ID -3104037)