GEAF-24/2021-22

Amount

Dismantling/opening of upper portion of diesel engine 125 KVA, water cooled, turbo charged 1500 RPM for repair of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete all as specified including replacement of unserviceable parts and testing of the DG Set after completion of job as per satisfaction of Engr-in-Charge. Note: This item includes only dismantling of engine and the cost of labour for repair and repalacement shall be paid sepearately under the reapective item below.

Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve seats/ guide, valve spring etc.

Labour for Repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge.

Labour for Grinding & Polishing of crank shaft and making it smooth for new heigher size of bearing and all as specifed and directed.

Labour for Repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, plungers, injectors etc.

Labour for assembling of engine after replacement of UNSV/defective parts with new as listed below supply only and job work listed against Srl item No 1.00 to 1.04 Note: All new spare parts and job work shall be measured and paid seperately under respective items.

Cylinder liner with sealing ring

Piston assembly with pin complete

Piston ring set

Cylinder Head Gasket (Front)

Cylinder Head Gasket (Rear)

C. R. bearing

C. R. Bushing

Hose set

Oil seal

Valve giude

Valve Seat

O-Ring

Intake Valve

Exhaust Valve

Valve spring (inner)

Valve spring (outer)

Valve Seat Spring

Cam bush

Main bearing

Oil Pan Gasket

Turbocharger assy

Turbochrger gasket

Dismantling/opening of upper portion of diesel engine 125 KVA, Make Greaves, water cooled, turbo charged 1500 RPM for repair of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete all as specified including replacement of unserviceable parts and testing of the DG Set after completion of job as per satisfaction of Engr-in-Charge. Note: This item includes only dismantling of engine and the cost of labour for repair and repalacement shall be paid sepearately under the reapective item below.

Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve seats/ guide, valve spring etc.

Labour for Repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge.

Labour for Grinding & Polishing of crank shaft and making it smooth for new heigher size of bearing and all as specifed and directed.

Labour for Repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, plungers, injectors etc.

Labour for assembling of engine after replacement of UNSV/defective parts with new as listed below supply only and job work listed against Srl item No 2.00 to 2.04 Note: All new spare parts and job work shall be measured and paid seperately under respective items.

Cylinder liner with sealing ring

Piston assy with piston pin complete

Piston ring set

C. R. bearing

C. R. Bushing

Valve giude

Valve insert intake/exhaust

Intake Valve

Exhaust Valve

Valve spring

Valve Seat Spring

Piston cooling nozzle

Lub oil pump

Cam bush

Main bearings

Gasket set upper

Gasket set lower

Water pump assy

Turbocharger assy

Dismantling/opening of upper portion of diesel engine 160 KVA, water cooled, turbo charged 1500 RPM for repair of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete all as specified including replacement of unserviceable parts and testing of the DG Set after completion of job as per satisfaction of Engr-in-Charge. Note: This item includes only dismantling of engine and the cost of labour for repair and repalacement shall be paid sepearately under the reapective item below.

Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve seats/ guide, valve spring etc.

Labour for Repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge.

Labour for Grinding & Polishing of crank shaft and making it smooth for new heigher size of bearing and all as specifed and directed.

Labour for Repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, plungers, injectors etc.

Labour for assembling of engine after replacement of UNSV/defective parts with new as listed below supply only and job work listed against Srl item No 3.00 to 3.04. Note: All new spare parts and job work shall be measured and paid seperately under respective items.

Piston Assy

Piston Ring Set

Liner

Main Bearing

Con Rod Bearing

Upper Engine Gasket

O-Ring

Set Of Complete Hose

Set Of Injector Pipe

Head Gasket

Set Of Fuel Flexible Pipe

Water Pump Assy

Inlet Valve

Exhast Valve

Valve Seat Inlet

Valve Seat Eaxhust

Injector Sleeve

Valve Collet

Con Rod Bush

Valve Guide

Tappet

Push Rod

Turbocharger assy

Dismantling/opening of upper portion of diesel engine 200 to 250 KVA, water cooled, turbo charged 1500 RPM for repair of engine including taking out radiator, fuel pump, hydraulic governors, lube oil pumps, water pumps, turbo charger etc complete all as specified including replacement of unserviceable parts and testing of the DG Set after completion of job as per satisfaction of Engr-in-Charge. Note: This item includes only dismantling of engine and the cost of labour for repair and repalacement shall be paid sepearately under the reapective item below.

Labour for Grinding, cutting & polishing of cylinder heads including, inserting new valve (Exhaust and inlet) valve seats/ guide, valve spring etc. (Spares as required/listed in this item shall be paid under item No 4.06 to 4.28 here-in-after).

Labour for Repair/overhauling and calibration of fuel pump complete by replacing of worn out parts such as bearing plungers, impeller and oil seal etc including testing complete all as specified and directed by Engr-in-charge.

Labour for Grinding & Polishing of crank shaft and making it smooth for new heigher size of bearing and all as specifed and directed.

Labour for Repair/ overhauling and calibration of injectors assembly complete by replacing of worn out parts, plungers, injectors etc.

Labour for assembling of engine after replacement of UNSV/defective parts with new as listed below supply only and job work listed against Srl item No 4.00 to 4.04. Note: All new spare parts and job work shall be measured and paid seperately under respective items.

Piston Assy

Piston Ring Set

Liner

Main Bearing

Con Rod Bearing

Upper Engine Gasket

O-Ring

Set Of Complete Hose

Set Of Injector Pipe

Head Gasket

Set Of Fuel Flexible Pipe

Water pump assy

Inlet Valve

Exhaust Valve

Valve Seat Inlet

Valve Seat Eaxhust

Injector Sleeve

Valve Collet

Con Rod Bush

Valve Guide

Tappet

Push Rod

Turbocharger assy

Note : Schedule of credit for Rs. 99,020.00 (Rupees Ninety Nine Thousand Twenty Only) to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documents

osho traders