PROVN OF ADDITIONAL INFRA STRUCTURE LABS IN THE PM SHRI KV AT AF STN MEMAURA

Amount

Excavation over areas not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n exc 1.5 m wide and n.exc 1.5 m depth for foundation etc., not exceeding 10 sq m on plan and getting out in soft/loose soil, all as specified and directed.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete. complete all as specified and as directed.

Use & waste formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical complete all as specified and as directed

Use & waste formwork to sides of pillars, posts, struts, piers, columns and stanchions.fair finished surface, complete all as specified and as directed

M&L RCC- M25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete omplete all as specified and as directed

M&L RCC M-25 design mix as in columns, pillars, piers, posts and struts complete all as specified and as directed

M&L ATT treating the backfill in contact with the foundation at the rate of 7.5Litre of emulsion per square metres of surface area complete all as specified and as directed

M&L ATT treating the top suraface of fiiled earth at the rate of 5Litre of emulsion per square metres of surface area, complete all as specified and as directed.

M&L ATT treating the soil under plinth protection at the rate of 5Litre of emulsion per square metres of surface area, complete all as specified and as directed

M&L mild steel TMT reinforcement bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L mild steel TMT reinforcement bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooping ends and binding complete all as specified and as directed

Returning filling inl.spreading, levelling, watering and well ramming in layers n. exc. 25 cm in soft/loose soil complete all as specified & directed..

Removing excavated material (Soil) n exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete, all as specified.

Use and waste formwork to sides and soffit of suspended slabs such as roof slab, floor slabs, etc. with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.

Use & waste formwork to sides and soffits of concrete of beam, lintels, cantilevers etc. with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.

Use & waste formwork to as in chajjas with rough finished square/rectangular surfaces of concrete complete all as specified and as directed.

M&L RCC M-25 design mix for slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC M-25 design mix for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for RCC M-25 for Chajjas and similar works complete all as specified and as directed.

Surface excavation in soft/loose soil n.exc 30cm deep and averaging 15 cm deep and getting out complete all as specified and as directed.

M&L for hardcore of guage exc 63mm but n exc 150mm deposited spread and levelled in layers n. exc 7.5cm thick, with broken stone, watered and rolled/rammed to a true surface, complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 as in floor 75 mm thick using 20mm stone aggregate and Finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Forming contraction(Dummy) joints 65 mm deep x 10 mm wide filled with Grade 'A' sealing compound complete all as specified and as directed.

M&L for Sand filling under floors or infoundations including watering and consolidation ,complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 as in floor 75 mm thick using 20mm stone aggregate and Finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 as in floor 40 mm thick using 20mm stone aggregate and complete all as specified and as directed.

M&L for kota stone 20-25 mm thick over screed base laid and jointed with grey cemrnt slurry mixed with pigment to match the shade including rubbing and polishing complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 20 mm thickin 1:6 ratio for laying floor finishes complete all as specified and directed

M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for rendering 15 mm thick with cement mortar in (1:6) on brick work or concrete surface finished even and smooth finish with out extra cement complete all as specified.

M&L for preparation of new plastered surface of walls,cieling, cornices, pilasters etc applying one coat of priming paint over 1.00mm thick wall putty and applying two coat of plastic emulsion paint on on walls/ chajja/ facias/ fins coloured or white complete all as specified and directed

M&L for rendering 5 mm thick with cement mortar in (1:3) in ceiling concrete surface finished even and smooth finish with out extra cement complete all as specified.

M&L Granite of any type 20 mm thick cut beded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing complete incl 20 MM thick bed 1:6 CM in slab top and vertical face of slab complete all as specified and as directed.

Supply & fix vitreous china wash hand basin, white size 550x400 mm including brackets, CP waste coupling & PVC waste pipe of 32 mm dia complete all as specified and directed.

S&F PVC (SWR) 75mm bore (dia) soil, waste and ventilating pipe, single socketed in any length with rubber ring joints with and including all necessary fittings such as bend, tee, junctions, traps etc fixed to walls, floors, etc complete all as specified and as directed.

S&F 15mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floors, complete all as specified and as directed .

All as per item No 37 here in before but 20mm bore.

S&F 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, complete all as specified & directed.

S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed.

S&F 20 mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F 15 mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for applying smart care damp proof ultra fibre reinforced elastometric liquid applied water proofing membrane as in roof treatment @ 1 litre per 10 Sqft inclusive of all three coats as per following application processes :- (a) Prepare the surface by cleaning with high pressure water jet/wire brushes to ensure that it is free of dust oil,greese, grime and loose particles. (b) Applying self priming coat of Smart Care Damp proof ultra duly diluted with water in 3:1 ratio by volume. Allow the primed surface to dry for at least 3-4 hours prior to application of subsequent coat. (c) Applying 2 perpendicular coats of Smart Care Damp proof Ultra without any dilution in achieve a forced system coverage. Allow it to dry for at least 4-6 hours between two coats. (Note: Work shall be carried out by the authorised applicators of the manufacturer in close supervision of Engr-in-charge.

Supply only integral water proofing compound complete all as specified and directed.

M&L for Rendering 15mm thick cement mortar 1:4 on fair faces of brick work or concrete sur?faces even and smooth, complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over one coat of 1.0mm putty and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.

S&F powder coated aluminium sliding window with shutter styles 40mm x20 mm sheet thickness 1.2mm Three shutter of glass, frame (chowkat) of window shall 91.80mmx31.75mmx1.2mm thick section for glass shutter (three track) with or without rebate. 5 mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter all as directed.

S&F pre-laminated MDF board, 18/19mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with welding to mild steel frame work complete all as specified and directed.

S&F hasp and staple, safety type, aluminum anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply & fix ISI Mark aluminium handles 100 mm long, cast type, anodized complete all as specified & directed.

Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, ladders, railing,cooler stands etc and similar work complete conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

Supply & fix mild steel framed brackets of angles or tees with web and flanges cut to shape drilled and countersunk for screws including welding angles n exc 10kg each brackets conforming to Fe-290 complete all as specified and directed.

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.

S&F aluminuim anodised sliding door bolt 250mm long with hasp staple bolt type and fixing clips of sheet etc complete all as specified and directed.

Supply & fix ISI Mark aluminium handles 150 mm long, cast type, anodized complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) for hold fasts, coping, pressed steel frame, benching roof kerbs etc . complete all as specified and directed.

M&L for point wiring for light/fan controlled by one switch with 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings, including 1.5 sqmm single core 1100 volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduiting and all as specified and directed .

All as per Srl item No 58 above but for 5 pin 5 Amps socket outlet point on independent board complete all as specified and directed.

M&L for point wiring with 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor with in and including PVC concealed conduit medium grade with all fittings, for an independant 6 pin 15/16 amps socket outlet ,including 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to comman earth dolly including cutting chases in walls / floors for concealed conduiting complete all as specified and directed.

S&F Modular switch 5/6 Amps, 230 V AC, single pole, one way complete all as specified and directed.

S&F socket outlet, multipurpose, modular 3 pin, 6 Amps, 2 module, 240 voltsr complete all as specified and directed.

S&F modular socket outlet combination 2 in 1, 3 pin 6 & 16 Amps, 3 module, controlled by one switch, 240 volts, complete all as specified and directed.

S&F modular ceiling fan regulator, electronic stepped type, 120 W, 2 module, 5 stage speed regulation, ISI marked complete all as specified and directed.

S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

Supply and fixing of white cover plate with frame 3 module as specified and directed.

Supply and fixing of white cover plate with frame 12 module as specified and directed.

Supply and fixing metal flush box 3 module all as specified and directed.

Supply and fixing metal flush box 12 module all as specified and directed.

M&L for submain wiring with two single core 1100 v grade FRLSH PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated FRLS flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including a separate concealed PVC conduit medium grade, ISI mark of dia not less than 25mm including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with adjoining surfaces.

S&F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.

S&F LED Street light fitting having Ingress Protection class IP-65 , suitable for road lighting luminaire with high power LED and maintenance free system for capaciy 35 watt complete with 40/32 mm bore light grade GI pipe bracket (1.5m long) duly bent to shape including 2 Nos mild steel flat 25x5mm clamps, nuts, bolts, washers etc. complete all as specified and as directed.

Supply and fixing air ventilating fan 300 mm sweep, metallic body, AC, single phase, 230 volts, complete with in-built louvers shutters and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete all as specified and directed.

Supply and fixing ceiling fan complete with blades, down rod and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 12 way, double door with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall, complete all as specified & directed.

S&F MCB SPN 240 volts, 'C' curve of rating 40 Amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified & directed.

S&F MCB single pole 240 volts, 'B' curve of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complete all as specified & directed.

Supply and laying GI tubing 25 mm bore, medium grade with all fittings laid in trenches/under floor etc. including cutting, threading connection in new or old position, complete all as specified and directed.

Supply and laying GI tubing 40 mm bore, medium grade with all fittings laid in trenches/under floor etc. including cutting, threading connection in new or old position, complete all as specified and directed.

Supply and laying GI tubing 80 mm bore, medium grade with all fittings laid in trenches/under floor etc. including cutting, threading connection in new or old position, complete all as specified and directed.

Supply and fixing gun metal gate/globe valve 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixed, including taking up or down old gate valve, complete all as specified and directed.

Supply and fixing gun metal gate/globe valve 40 mm bore with iron wheel head, screwed both ends for iron pipe and fixed, including taking up or down old gate valve, complete all as specified and directed.

Supply and fixing of cast iron sluice valve suitable for 80mm bore pipe. drilled flanged ends (integrally cast), class PN-1.6 conforming to IS- 14846, ISI marked, wheel operated (handle) with high tensile stainless steel spindle and cast iron cap including jointing materials such as rubber/ fiber board packing rings/ gasket with requisite nuts, bolts and washers etc., complete all as specified & directed.

M&L for construction valve chamber 900X900X900mm (internal size) suitable for valves built with one brick thick wall using sub class 'B' bricks, old size, with sub base PCC 1:4:8 type D-2 for foundation and brick wall in cement mortar 1:4, PCC 1:2:4 type B-1 for coping, rendering in CM (1:4) 15mm thick including provision of mild steel sheet cover 3 mm thick fixed on 40X40X5mm angle iron frame work with two coats of synthatic enamel black paint over a coatof red oxide primer and locking arrangement including necessary excavation earth work complete all as specified and directed.

M&L for construction valve chamber 600X600X600mm (internal size) suitable for valves built with one brick thick wall using sub class 'B' bricks, old size, with sub base PCC 1:4:8 type D-2 in foundation and brick wall in cement mortar 1:4, PCC 1:2:4 type B-1 for coping, rendering in CM (1:4) 15mm thick including provision of mild steel sheet cover 3 mm thick fixed on 40X40X5mm angle iron frame work with two coats of synthatic enamel black paint over a coatof red oxide primer and locking arrangement including necessary excavation earth work complete all as specified and directed.

M&L Brick work with fly ash brick old size, straight or curved on plan exc 6 mtrs mean radius and built in cement mortar 1:6, complete all as specified & directed.

M/s RAAJSHREE INFRA (BID ID -3204029)

M/S KAUSHIK CONSTRUCTION (BID ID -3207493)

Shri Siddhi Vinayak Builders (BID ID -3206150)