REPAIR TO RETANINING WALLS, TOE WALL, PCC COPING, KEYED POINTING, PLASTERING, FENCING, WALKWAYS, INERLOCKING TILES, PCC HARD STANDING , BOUNDARY WALL, ANGLE IRON, BARBED WIRE, FENCING, CONERTINA COIL, GATES AND OTHER CONNECTED ITEMS

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed by Engineer -in-charge

M&L for Walling of random rubble, uncoursed well bonded, bedded and solidly hearted as built in Cement mortar 1:4

M&L for Walling of random rubble, uncoursed well bonded, bedded and solidly hearted as built in Cement mortar 1:4, except stone, stones retrieved from relevant item above.

M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in Cement mortat 1:4

M&L for Providing, cement concrete type B-1, 1:2:4 (20mm graded aggregate) in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto for above item.

Demolition of reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed by Engineer -in-charge

M&L for Providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

M&L for TMT bars Fe 500 10mm dia and over cut to length bent to shape required including cranking hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry type C-1, 1:3:6 (20mm graded aggregate) set in cement mortar 1:4 with solid blocks, exc. 10 cm in width and setting in mortar, complete

Taking down cement or cement lime plaster, any description on brick or stone walls built in cement or cement lime mortar, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Rendering 10mm thick in Cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement)

Demolition of cement Concrete (unreinforced) in ground floors and pavings exc 15 cm thickness (above ground level) all as specified and directed by Engineer -in-charge

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc.

M&L for Hardcore of broken stone of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and directed by Engineer -in-charge

M&L for 100mm thick Cement concrete type B- 2, 1:3:6 (40mm graded aggregate) as in sub base to pavement.

M&L for 50mm thick Sand filling under floors or in foundations including watering and consolidation all as directed.

M&L for laying of Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade fixed with with grey cement and pigment

Labour only for laying of Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade fixed with with grey cement and pigment, blocks retrieved from demolition as per relevant Item above

M&L for laying of Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade fixed with with grey cement and pigment retrieved from demolition as per Item above

Labour only for laying of Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade fixed with with grey cement and pigment, blocks retrieved from demolition as per relevant Item above

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm / 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes all as specified and directed.

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less

Add/Deduct to item above if Extra/less/ kg of cement used for cubic metre for above item.

Finishing surfaces of concrete pavement by brooming complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A complete

Providing and laying at or near ground level, factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for Rolled mild steel grade Fe-410-W (Gde-E-250) quality- B in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

M&L for Mild steel Fe-410-W (Gde- E-250) quality-B in flat, round or square bars, in available lengths

M&L for Rolled mild steel grade Fe-410-W (Gde-E-250) quality- B in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of Zinc chrome red oxide primer and two coats of synthetic enamel paint all as specified.

M&L for preparation of old treated Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat synthetic enamel paint all as specified.

Dismantling of fencing wire mesh, any type

Supply only PVC coated Chain link MS galvanisd fencing, any size or type, to match with existing fencing.

Fixing only new chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Fixing of old chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire retrieved from dismantling as above

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F in repairs, for galvanised mild steel concertina coil fencing with punched taper concertina coil 600mm dia 10 meter openable length (total length 90m), having 50 rounds per 6meter length, spring core wire 2.5mm dia of high tensile strength of 165Kg/Sqmm with tape 0.52mm thick and weight 43.478gram/meter and fixing the same with existing angle iron frame with 6 horrizontal RBT (Rainforced barbed tape) wire, stud tied with GI staple and GI clip to retain horrizontal including necessary bolts etc including all necessary scafolding like timbering, planking, struting and props etc complete all as specified and as directed.

M/s Himanshu Tyagi (BID ID -3268365)