CERTAIN EM MAINT REPAIR WORKS OF INTERNAL ELECT SWITCHES SOCKETS WIRING FITTINGS ETC IN BUILDINGS AND OTHER CONNECTED WORKS AT KLP ZONES AT BABINA CANTT

Amount

Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power point ) complete , including taking out fixtures and fittings such as switches , ceiling roses, pendents, regulators ,sockets,light fitting etc removing materials to store for keeping in safe custudy or for taking credit ( as per schedule of credit for dismantled/taken out items ) and making good the disturbed surfaces of walls, floors, ceilings etc and as directed .

Taking down carefully existing wooden board , Main switch, MCB DB boxes, TPN boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

Taking down carefully sub main wiring with any cable / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.

M & L for CONCEALED point wiring one light point controlled by one modular switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 Sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including non metelic rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.6 mm thick) including earth dolly with frame plates with matching cover plates all modules including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed .NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduit to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size as directed fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick ISI marked hylam sheet/ backlite sheet cover fixed with suitable brass screws and cup washers

All as per Srl item No.4 above but one fan /Exhaust point controlled by one modular switch & modular regulator.

All as per Srl item No.4 above but one 3/5 pin 5 Amp socket outlet point controlled by one modular switch on independent board.

All as per Srl item No.4 above but one 3/5 pin 5 Amp socket outlet point controlled by one modular switch on same board.

All as per Srl item No.4 above but one Bell/Buzzer point controlled by one modular switch

Description all as per item No 4 above but for power point wiring using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed.

M & L for CONCEALED point wiring one light point controlled by one modular switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 Sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including PVC Caping , clip, with MS terminal boxes (not less than 1.6 mm thick) including earth dolly with frame plates with matching cover plates all modules including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed .NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduit to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size as directed fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick ISI marked hylam sheet/ backlite sheet cover fixed with suitable brass screws and cup washers

All as per Srl item No. 10 above but one fan /Exhaust point controlled by one modular switch & modular regulator.

All as per Srl item No.10 above but one 3/5 pin 5 Amp socket outlet point controlled by one modular switch on independent board.

All as per Srl item No.10 above but one 3/5 pin 5 Amp socket outlet point controlled by one modular switch on same board.

All as per Srl item No.10 above but one Bell/Buzzer point controlled by one modular switch

Description all as per item No 10 above but for power point wiring using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed.

M & L for PVC suface conduit point wiring one light point controlled by one switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 Sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including non metellic rigid PVC conduit , clip, with MS terminal boxes (not less than 1.6 mm thick) including earth dolly with frame plates with matching cover plates all modules including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed .NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduit to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size as directed fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick ISI marked hylam sheet/ backlite sheet cover fixed with suitable brass screws and cup washers

All as per Srl item No. 16 above but one fan /Exhaust point controlled by one switch

All as per Srl item No.16 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

All as per Srl item No.16 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per Srl item No.16 above but one Bell/Buzzer point controlled by one switch

All as per Srl item No. 16 above but one light point controlled by two way switch

Description all as per item No 113 above but for power point wiring using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed.

M & L for PVC Casing Caping point wiring one light point controlled by one modular switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 Sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including PVC Caping , clip, with MS terminal boxes (not less than 1.6 mm thick) including earth dolly with frame plates with matching cover plates all modules including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed .NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduit to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size as directed fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick ISI marked hylam sheet/ backlite sheet cover fixed with suitable brass screws and cup washers

All as per Srl item No. 23 above but one fan /Exhaust point controlled by one modular switch & modular regulator.

All as per Srl item No.23 above but one 3/5 pin 5 Amp socket outlet point controlled by one modular switch on independent board.

All as per Srl item No.23 above but one 3/5 pin 5 Amp socket outlet point controlled by one modular switch on same board.

All as per Srl item No.23 above but one Bell/Buzzer point controlled by one modular switch

Description all as per item No.23 above but for power point wiring using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed.

M & L for CONCEALED point wiring one light point controlled by one switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 Sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including PVC Caping , clip, with MS terminal boxes (not less than 1.6 mm thick) including earth dolly with frame plates with matching cover plates all modules including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed .NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduit to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size as directed fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick ISI marked hylam sheet/ backlite sheet cover fixed with suitable brass screws and cup washers

All as per Srl item No. 29 above but one fan /Exhaust point controlled by one modular switch & modular regulator.

All as per Srl item No.29 above but one 3/5 pin 5 Amp socket outlet point controlled by one modular switch on independent board.

All as per Srl item No.29 above but one 3/5 pin 5 Amp socket outlet point controlled by one modular switch on same board.

All as per Srl item No.29 above but one Bell/Buzzer point controlled by one modular switch

Description all as per item No 29 above but for power point wiring using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed.

S & F switch piano flush button type 10 Amp, single pole ,one way , AC ,230 Volts , 50 Hz complete all as specified and as directed.

S & F switch piano flush button type 10 Amp, single pole, two way ,AC , 230 Volts , 50 Hz complete all as specified and as directed.

S&F socket outlet 2in 1 , 3 pin , 10 Amp , AC , 230 Volts , 50 Hz complete all as specified and as directed.

S & F switch piano flush button type 20 Amp, single pole, one way ,AC ,230 Volts ,50 Hz complete all as specified and as directed.

S & F socket outlet 2 in 1, 10 Amp and 20 Amp, AC , 230 Volts ,50 Hz complete all as specified and as directed.

S & F delux fan Regulator rotary, step type , AC ,240 Volts ,50 Hz complete all as specified as directed.

S & F switch bell push button type 10 Amp, single pole complete all as specified and as directed.

S & F modular switch flush button type 10 Amp, single pole one way complete all as specified and as directed.

S & F modular socket outlet 10 A , 2 in 1 , 3 pin flush type etc complete all as specified and as directed.

S & F modular switch flush button type 20 Amp, single pole one way complete all as specified and as directed.

S & F modular socket outlet 2 in 1 , 3 pin10 Amp and 20 Amp flush type etc complete all as specified and as directed.

S & F modular delux fan Regulator socket type 2 module , 240 Volt 50 Hz complete all as specified as directed. Make : Anchor, Cona , Havells

S & F modular bell push ,10 Amp 1 module , 240 Volt 50 Hz complete all as specified as directed. Make : Anchor, Cona , Havells

S & F Lamp holder,PVC/Urea type with back plate ,AC ,230 Volts ,50 Hz , ISI marked suitable for batten fittings complete all as specified as directed

S&F ceiling rose,surface bakelite 65 x50mm three brass terminals, AC ,230 Volts ,50 Hz ISI marked complete all as specified and as directed.

S & F Bell DING DONG , AC ,230 volts ,Single pole etc complete all as specified as directed.

S & F 9/10W LED retrofit Ball lamp holder base B-22, bipin type AC 230 Volts 50 Hz with PF not less than 0.95 with polycorbonate body and aluminium heat sink complete all as specified as directed.

S&F modular matching cover frame plate for 1/2 modules box etc complete all as spcified and directed.

S&F modular matching cover frame plate for 3 modules box etc complete all as spcified and directed.

S&F modular matching cover frame plate for 4 modules box etc complete all as spcified and directed.

S&F modular matching cover frame plate for 6 modules box etc complete all as spcified and directed.

S&F modular matching cover frame plate for 8 modules box etc complete all as spcified and directed.

S&F modular matching cover frame plate for 12 modules box etc complete all as spcified and directed.

S&F modular matching blinker etc complete all as spcified and directed.

S & F MCB protector power unit include MCB 16 A to 25 A ,220 V , 50 Hz complete all as specified as directed.

S & F sheet metal enclosure with two pin socket , chain plug cover and with MCB SP of 20 Amp capacity ,10 KA ‘C’ series -1 No etc complete all as specified and as directed.

S&F for sub main wiring with PVC insulated, unsheathed flame retardant Low Smoke(FRLS) 2 single core cable 1100 volts grade with copper conductor of size 6 sq mm (Nominal area) multi stranded drawn into old/ new non rigid metellic PVC conduit with and including 6 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: Two run of single core PVC cable with one run of earth conductor cable and conduit shall be measured as one unit. (ii)Cost of new PVC conduit including conduit accossories shall be measured and paid seperately .

S&F for sub main wiring with PVC insulated, unsheathed flame retardant Low Smoke(FRLS) 2 single core cable 1100 volts grade with copper conductor of size 4 sq mm (Nominal area) multi stranded drawn into old/ new non rigid metellic PVC conduit with and including 4 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: Two run of single core PVC cable with one run of earth conductor cable and conduit shall be measured as one unit. (ii)Cost of new PVC conduit including conduit accossories shall be measured and paid seperately .

S&F for non rigid metellic PVC conduit not less than 20 mm dia (ISI Marked ) incl all fittings such as Tees,bends, elbows ,reducers ,bell mouth,tube ends and fixing accessroies etc complete all as specified and as directed.

S&F TPN DB- DPX 125 MCCB DBs 4 way double door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as out going no of modules DPX 125 + 12 etc complete all as specified and directed.

S&F MCCB , 100 Amps, 415 Volts, 4 P , 50HZ, having 25 KA rupturing capacity with electronic trip arrangment and setting screw upto 70% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed .

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100Amp rated bus bar 12 ways 240 V complete all as specified and as directed.

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100Amp rated bus bar 8 ways 240 V complete all as specified and as directed.

S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 100Amp rated bus bar 4 ways 240 V complete all as specified and as directed.

S&F sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 100Amp rated bus bar 2 ways 240 V complete all as specified and as directed.

S&F MCB douple pole 40 Amp 240 V ,10KA , 'C' series, ISI marked complete all as specified and as directed with copper lugs.

S&F MCB double pole 63 Amp 240 V ,10KA , ' C' series, ISI marked complete all as specified and as directed with copper lugs.

S&F MCB single pole neutral 40 Amp 240 V ,10 KA , 'C' series, ISI marked complete all as specified and as directed with copper lugs.

S&F MCB single pole neutral 63 Amp 240 V ,10 KA , 'C' series, ISI marked complete all as specified and as directed with copper lugs.

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, ISI marked complete all as specified and as directed with copper lugs.

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'B' series, ISI marked complete all as specified and as directed with copper lugs.

S&F in repairs 20 W LED ,6000k decorative ultra slim linear fitting , extruded aluminium , environmental friendly, energy efficient incl 20 W lamp fitted incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed.

S&F in repairs 22 W LED ,6000k , COOL WHITE decorative ultra slim Tube light fitting , extruded aluminium , environmental friendly, energy efficient incl 22 W lamp fitted incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed.

S&F in repairs 22 W LED fitting decorative ultra slim Tube light fitting , extruded aluminium , environmental friendly, energy efficient incl 22 W lamp fitted incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed.

S&F in repairs 24 W LED fitting decorative ultra slim Tube light fitting , extruded aluminium , environmental friendly, energy efficient incl 24 W lamp fitted incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed.

S & F in repair decorative wall light fixture made of polycarbonate including LED bulb 10 W complete as directed.

S & F in repair LED light fitting Mirror type with high out put diffuser 10 Watts ,220 V AC decorative type with driver holder and LED lamp including connecting up with 3 core copper conductor of suitable size complete as directed.

S & F Athena 1 (OPAL) post top lantern in soothing opal finish made of polycarbonate with LED lamp 10 W complete all as specified and as directed.

S & F decorative gate light Moon ( Opal) made up of high grade unbreakable polycarbonate suitable for retrofit bulb upto 20 W incl 20 W LED lamp complete all as specified and as directed.

S&F 36W LED 2x2 Ultra mordern ceiling mounted luminaire suitable for armstrong/ grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose.

S&F 42W LED 2x2 Ultra mordern ceiling mounted luminaire suitable for armstrong/ grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose.

S&F 1x18 W LED light fitting 240 volt decorative ultra round profile LED fitting fixure with extruded polycarbonate COOL WHITE connecting with 3 core flexible copper conductor of suitable size etc complete all as specified and as directed.

S&F 15 W LED 4000k LED recess mounting SQUARE downlighter COOL WHITE with optimized heat sink for efficient heat dissiation and seperate replacable electronic driver etc complete all as specified and as directed.

S&F 15 W LED 4000k LED recess mounting ROUND downlighter cool white with AL extrusion sqaure & powder coated white housing etc complete all as specified and as directed.

S&F in repair Bulk head LED luminaries with opal diffuser , IP 65 incl 10 watt LED lamp , comprising of deep drawn anodized aluminium body, epoxy white powder coated, complete with accessories on a detachable tray and covered with heat resistant prismatic glass cover with weather proof gasket complete all as specified and directed.

S&F in replacement 70-80 Watt LED light fitting exclusive innovative disigned ,long life versalite pressure die cast aluminium housing flood light luminaire with high power LED as source with IP - 66 power consumption 70 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable street light any type/any capacity including replacement of twisted 3 core copper cable of size 2.5 Sqmm dia for connecting phase, neutral and earth from junction box to light through connectors all as specified and directed.

S&F in replacement 100 Watt LED light fitting exclusive innovative disigned ,long life versalite pressure die cast aluminium housing flood light luminaire with high power LED as source with IP - 66 power consumption 70 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable street light any type/any capacity including replacement of twisted 3 core copper cable of size 2.5 Sqmm dia for connecting phase, neutral and earth from junction box to light through connectors all as specified and directed.

S&F in replacement LED security light fitting 1 X 40 W LED with pressure die cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection etc complete suitable for 32 mm dia tubing including 32 mm dia light grade pipe bracket, bend to shape 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed.

S&F in replacement LED security light fitting 1 X 36 W LED with pressure die cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection etc complete suitable for 32 mm dia tubing including 32 mm dia light grade pipe bracket, bend to shape 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed.

Supplying and fixing in replacement 1100 volt grade heavy duty ISI marked cable PVC insulated strandrad aluminium conductoe wire one twin core cable flat or circular of size 16 sqmm to be connected to MCB box /Main switch etc etc complete all as directed.

Supplying and laying in replacement 1100 volt grade heavy duty ISI marked cable PVC insulated strandrad aluminium conductoe wire one twin core cable flat or circular of size 10 sqmm to be connected to MCB box /Main switch etc etc complete all as directed.

Supplying and laying in replacement 1100 volt grade heavy duty ISI marked cable PVC insulated strandrad aluminium conductoe wire one twin core cable flat or circular of size 6 sqmm to be connected to MCB box /Main switch etc etc complete all as directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weight n less than 17.25 kgs buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT I ( 2009) with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/s Ravi Traders