Maintenance painting and polishing of all type of wooden and steel furniture at GE Gomantak

Amount

Removal of following existing unserviceable wooden components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components/ discorded components as mentioned including tightening the joints, placing every part in-tact as applicable as per drgs. Work will be executed where the furniture exist in different User Units such as Nofra-I, Nofra-II, NAD, MO Goa, INS Gomantak etc. of GE Gomantak including BSO's Furniture Yard complete all as directed.

Table Dining 6 Persons (FD- 30, 239, 273, FD/MAP-II/03)

a) Table Top 18/19 mm MDF board exterior grade with 6 mm thick teak wood beeding of approved/ existing shade

b) Triangular teakwood bracket of size 60 x 60 x 25 mm to make intact and strengthen

c) Leg as per drg

d) Long rail as per drg

e) Short rail as per drg

Table Dining 8 Persons (FD- 30, 239, 273, FD/MAP-II/03)

a) Table Top 18/19 mm MDF board exterior grade with 6 mm thick teak wood beeding of approved/ existing shade

b) Leg as per drg

c) Long rail as per drg

d) Short rail as per drg

e) Triangular teakwood bracket of size 60 x 60 x 25 mm to make intact and strengthen

Table Writing/ Medium/ Study (FD-33, 249, 275)

a) Table Top with 18/19mm thick MDF board exterior grade 6 mm thick teak wood beeding of approved/ existing shade

b) Leg as per drg

c) Foot rest/ Stiffner as per drg

d) Bottom rail as per drg

e) Sides of cabinet with 18mm thick ply wood and 1.5 mm thick lamination as per drg

f) Short rail as per drg

g) Front/ Long rail as per drg

h) Drawer as per drg

j) Aluminium Knob as per drg

k) Cabinet door along with piano hinges and lock as per drg

Peg Table (FD-25, 236, 277, 384)

a) Table Top with 18/19mm thick MDF board exterior grade 6 mm thick teak wood beeding of approved/ existing shade

b) Leg as per drg

c) Stiffner as per drg

d) Top Long rail as per drg

e) Triangular teakwood bracket of size 60 x 60 x 20 mm to make intact and strengthen

Table Bed Side (FD-28, 248, 276)

a) Back ply as per drg

b) Base/side leg as per drg

Table Center/ Table Center Two Tier (FD-29, 235, 274)

a) Table Top with 18/19mm thick MDF board exterior grade 6 mm thick teak wood beeding of approved/ existing shade

b) Leg as per drg

c) Top batten short rail as per drg

d) Top batten long rail as per drg

e) Triangular teakwood bracket of size 60 x 60 x 20 mm to make intact and strengthen

f) Stiffner as per drg

Bin Soiled Linen Large (FD-15, 244, 212)

a) Top ply as per drg

b) Front or back ply as per drg

c) Base leg as per drg

Side Board (FD-26 (M), 241, 371, 1112)

a) Back ply as per drg

b) Door shutter as per drg

c) Drawer complete as per drg

d) Top with 18/19 mm thick MDF board all as per drg

e) Base leg as per drawing

f) CP Knob as per drg

Teapoy (FD-34, 232, 278, 382)

a) Table Top with 18/19mm thick MDF board exterior grade 6 mm thick teak wood beeding of approved/ existing shade

b) Front rail as per drg

c) Leg as per drg

d) Stiffner as per drg

e) Triangular teakwood bracket of size 60 x 60 x 20 mm to make intact and strengthen

Hat Stand with Mirror (FD-23(M), 233, 206)

a) 5.5 mm thick Mirror as per drg

b) Back ply as per drg.

c) Front ply as per drg.

d) Peg as per drg.

e) MS Key plate as per drg.

Table Dressing Ladies (FD- 32, 251, 378)

a) 5.5 mm thick looking mirror as per drg

b) Plain Glass shutter with aluminium channel as per drg

c) 06mm Back ply commercial type for mirror frame as per drg

d) Drawer complete as per drg

e) Knob as per drg

Table Dressing Gents with mirror (FD- 31, 230, 379)

a) 5.5 mm thick looking mirror as per drg

b) 06mm Back ply commercial type for mirror frame as per drg

c) Drawer complete as per drg

d) Knob as per drg

Stool CB Dressing (FD-27 (M), 252, 282, 374)

a) 2 mm wide canning in full as per drg

b) Side rail as per drg

c) Long rail as per drg

d) Leg as per drg

e) Side stiffner as per drawing

f) Middle stiffner as per drg

Chair Dining (FD 16(M), 228, 279)

a) 2 mm wide canning as per drawing

b) Front Leg as per drg

c) Back/ Rear leg as per drg

d) Leg stiffner as per drawing

e) Front/Rear/ side rail as per drg

f) Back stiffner as per drg

g) Triangular teakwood bracket of size 60 x 60 x 25 mm to make intact and strengthen

h) Cane patti as per drawing

Chair Dining Long Back/ Chair dining Officer (WDF-2193, FD/MAP-II/04, 357 )

a) Front Leg as per drg

b) Back/ Rear leg as per drg

c) Leg stiffner as per drawing

d) Fornt rail as per drawing

e) Seat top rail as per drawing

f) Curved verticle Strip of Back rest as per drawing

g) Complete seat cushion 75 mm thick, 40 density with upholstry not less than Rs. 300 per RM and 12 mm thick BWR plywood as per drawing

h) Seat cushion 75 mm thick, 40 density with upholstry not less than Rs. 300 per RM

j) Upholstry not less than Rs. 300 per RM

k) Triangular teakwood bracket of size 60 x 60 x 25 mm to make intact and strengthen

Chair writing (FD-20 (M), 250, 280)

a) 2 mm wide canning as per drawing

b) Front Leg as per drg

c) Back/ Rear leg as per drg

d) Side stiffner as per drawing

e) Middle stiffner as per drawing

f) Front rail as per drg

g) Rear/ side rail as per drg

h) Arm Rest as per drg

j) Cane patti as per drawing

k) Triangular teakwood bracket of size 60 x 60 x 25 mm to make intact and strengthen

Chair Easy (FD-17(M), 201, 229)

a) 2 mm wide canning including seat and back as per drawing

b) Front Leg as per drg

c) Back/ Rear leg as per drg

d) Front/ rear rail of seat as per drg

e) Arm Rest as per drg

f) Cane patti as per drawing

g) Triangular teakwood bracket of size 60 x 60 x 25 mm to make intact and strengthen

Sofa Set 5 Seater with arms (FD 281, 258, 373, FD /MAP/II/02)

a) Removing U/S Cushion from Sofa set and supply and fix new U foam Cushion 100 mm thick 40 density as per drg

b) Removing U/S Cushion cover from Sofa set and supply and fix new tapestry cloth Cushion cover duly stiched along with Zip facility and tapestry cloth of cushion costing not less than 250/- per meter. The tepastry shall be approved by GE/Engr-in-Charge.

c) 12mm thick BWP Marked (IS-303) Back/ seat ply of sofe 3 seater as per drg

d) 12mm thick BWP Marked (IS-303) Back/ seat ply of sofe single seater as per drg

Sofa Set 4 seater with arms (FD 281, 258, 373)

a) Removing U/S Cushion from Sofa set and supply and fix new Cushion 100 mm thick 40 density as per drg

b) Removing U/S Cushion cover from Sofa set and supply and fix new tapestry cloth Cushion cover duly stiched along with Zip facility and tapestry cloth of cushion costing not less than 250/- per meter. The tepastry shall be approved by GE/Engr-in-Charge.

Book case/ Book Shelf (FD-45(M), WDF-7 & 45/99, VASF-98)

a) Base Leg as per drg

b) Top as per drawing

c) Shelf as per drg

d) Back as per drg

e) Knob as per drg

Board Notice 2440 x 1220 mm (FD-99(R))

a) Back ply as per drg

b) Glass of shutter as per drg

c) Hasp & Staple as per drg

Board Notice 1830 x 1220 mm/ 1850 x 1220 mm/ Display Board (FD-99, GE MV 603, WDF-19)

a) Back ply as per drg

b) Glass of shutter as per drg

c) Hasp & Staple as per drg

Board Notice 900 x 600 mm/ Display Board (FD-1042, 366, WDF-32, GE MV 601, 21/86)

a) Back ply as per drg

b) Glass of shutter as per drg

M&L for applying two coat of touchwood to the following furniture articles all of MES pattern viz F/DB/FD series or Similar items polishing all as specified and shown on drgs and directed.

Bin Soiled linen (FD-15, 244)

Chair dining (FD-16(M), 228, 279, 203, FD/MAP-II/05)

Chair writing (FD-20(M), 250, 280)

Chair Easy (FD-17(M), 201, 229)

Hat stand with mirror (FD-23(M), FD-233, 206)

Peg Table (FD-25, 236, 277, 384)

Side Board (FD-26(M), 241, 371, 1112)

Sofa 5 seater (FD 281, 258, 373, FD/MAP-II/02)

Sofa 4 seater (FD 281, 258, 373)

Stool CB Dressing (FD-27 (M), 252, 282, 374)

Table dining 6 persons (FD-30, 239, 273, FD/MAP-II/03)

Table dining 8 persons (FD-30, 239, 273)

Table bed side (FD-28(M), 248, 276, 210)

Table Centre (FD-29, 235, 274)

Table Writing/Medium/ Study (FD-33, 249, 275)

Teapoy (FD-278, 382, 34, 232)

Bookcase/ Book Shelf (FD-45 (M), 237, WDF-7 & 45/99, VASF-98)

Table dressing gents with mirror (FD-31, 230, 379)

Table dressing ladies with mirror (FD-32, 251, 378)

Chair dining with long Back/Officer (FD-357, WDF-2/93, FD/MAP-II/04)

Board Notice 2440 x 1220 mm (FD-99(R))

Board Notice 1830 x 1220 mm/ 1850 x 1220 mm/ Display Board (FD-99, GE MV 603, WDF-19)

Board Notice 900 x 600 mm/ Display Board (FD-1042, 366, WDF-32, GE MV 601, 21/86)

Bed plywood top/ Hard Bed (FD-213, 245, 246)

Removing old U/S PVC/Rubber Shoe from all types of Chairs, Tables, stool CB dressing and sofa set and S&F new PVC/Rubber Shoe as per drg. (FD- 16(M), 228, 279, 203, FD/MAP-II/05, FD-280, 250, 20(M), 17(M), 229, 201, 384, 25, 236, 277, 281, 258, 373, FD/MAP-II/02, FD- 27(M), 252, 282, 374, 30, 239, 273, FD/MAP-II/03, 29, 235, 274, 33, 249, 275, 278, 382, 34, 232, 45 (M), 237, WDF-7 & 45/99, VASF-98, FD-357, WDF-2/93, FD/MAP-II/04

Removal of following existing unserviceable components of various furniture items given below carefully without disturbing the adjoining parts and supply & fixing new components in lieu of dismanteled parts/ discorded components as mentioned including tightening the joints, placing every part in-tact. Work will be executed where the furniture exist in different User Units such as Nofra-I, Nofra-II, NAD, MO Goa, 2W DET, INS Gomantak etc. of GE Gomantak including BSO's Furniture Yard complete all as directed.

Almirah Large Steel Half Hanging Half Shelf (FD-114(M), FD/E6/MAP/18 )

a) 3-Way locking assembly with iron plate and 01 Nos rod 10 mm and lock cover

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) Shelf as per drg

f) MS Lock as per drg

g) MS Hinges as per drg

h) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Almirah Cadet steel (WDF-49/07)

a) 3-Way locking assembly with iron plate and 01 Nos rod 10 mm and lock cover

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) Shelf as per drg

f) MS Lock as per drg

g) MS Hinges as per drg

h) Looking mirror as per drg

j) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Almirah Large Steel with shelves/Glazed (FD-67(M), FD-104, 1031, 351, GE MV-608)

a) 3-Way locking assembly with iron plate and 01 Nos rod 10mm and lock cover

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) Shelf as per drg

f) MS Lock as per drg

g) MS Hinge as per drg

h) Glass as per drg

j) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Almirah Steel Medium with shelves (FD-1032, FD-67(M), FD-243, FD-350)

a) 3-Way locking assembly with iron plate and 01 Nos rod 10mm and lock cover

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) MS Hinge as per drg

f) Shelf as per drg

g) MS Lock as per drg

h) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Locker Bed side Steel (FD 1029, FD-127(M), WDF-18/07, GE/G/F/04/2000)

a) Handle as per drg

b) Leg as per drg

c) Door as per drg

d) Shelf as per drg

e) Hasp & Staple as per drg

f) Aluminium rof as per drg

g) MS Hinge as per drg

h) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Book Case Steel/ Book Shelf open large Steel (FD-90, FD-69(M), FD-1028)

a) New Glass as per size and Drg

b) Handle as per drg

c) MS Lock as per drg

d) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Chair Computer / Revolving (FD/E6/MAP/01, TP)

a) Chair Base PVC with five wheels as per drg

b) Arm black integral skin polyurethane reinforced with MS insert scratch proof (75-85 shore hardness) as per drg

c) Caster Wheel as per drg

d) Tapestry of seat & Back cost not less than Rs. 300 per RM complete with PVC beading as per drg

e) Hydraulic system of chair all as per drg and as directed

f) S&F nut and bolt of chair computer as required

g) New seat made of 12 mm thick hot pressed plywood with fabric polypropylene/ acrylic (range of fabric not less than Rs. 300.00 Per RM) and moulded polyurethane foam and PVC lipping all around complete as per drawing

h) New back made of 12 mm thick hot pressed plywood with fabric polypropylene/ acrylic (range of fabric not less than Rs. 300.00 Per RM) and moulded polyurethane foam and PVC lipping all around complete as per drawing

j) New PVC beading all around the seat and back of chair complete as per drawing

Chair writing / Chair Visitor (FD/E6/MAP/12, TP)\

a) Removing of existing U/S seat ply including cushion foam and tapestry of chair wiriting MAP and S&F with new seat ply including cushion foam and tapestry (range not less than Rs. 300 per Rm) as shown in drg.

b) Removing of existing U/S back ply including cushion foam and tapestry of chair wiriting MAP and S&F with new back ply including cushion foam and tapestry (range not less than Rs. 300 per Rm) as shown in drg.

c) Removing of existing U/S tapestry of seat & back of chair wiriting MAP and S&F with new tapestry (range not less than Rs. 300 per Rm) including PVC lipping/Beading as shown in drg.

d) Arm black integral skin polyurethane reinforced with MS insert scratch proof (75-85 shore hardness) as per drg

e) Rejoining the base of stiffner with spot welding of broken joints not exceeding 25 mm in length as and where required as per drg.

f) Removing U/S PVC beading from seat and back of existing chair writing and S&F new PVC beading in eat and back of chair wrting as per drg.

Chair Verandah (FD-256, FD-359)

a) Removing of U/S canning of seat of chair verandah and recanning of seat of chair verandah with new cane half round white plastic cane of superior quality of size 4 mm width as per drg

b) Removing of U/S canning of back of chair verandah and recanning of seat of chair verandah with new cane half round white plastic cane of superior quality of size 4 mm width as per drg

c) PVC seat & Back (each set) 4 mm thick seat made of PPCP material as per standard weight suitable for chair verandah complete all as specified and directed. Note:- One pair of one seat and one back shall be considered as each set. Make of PVC Seat back - AMKO/CELLO/SWASTIK

Chair CB steel with Arms FD-75(M)

a) Seat of size 560 x 460 mm made of 40 thick with 32 density cushion including 12mm thick plywood with rexin of good quality along with provision of MS flat iron 470 x 25 x 3mm (02) Nos duly welded for both side of seat to rest and strengthen as per drg

b) Back of size 400 x 460 mm made with 40mm thick cushion on 12mm thick plywood with rexin of good quality

c) Arm rest as per drg

d) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

e) Clits made out of MS flat bar 25mm x 3mm thick and 40mm long with a hole to to fix the seat & back as per drg

Table Office Clerk Steel (FD-84(M), FD-1004)

a) Lock of drawer as per drg

b) Drawer as per drg

c) Stiffeners as per drg

d) Short stiffner as per drg

e) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

f) Table Top 18/19 mm MDF board exterior grade with 6 mm thick teak wood beeding of approved/ existing shade

Table Office Officer Steel (FD-84(M), FD-1003)

a) Lock of drawer as per drg

b) Drawer as per drg

c) Stiffeners as per drg

d) Short stiffner as per drg

e) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

f) Table Top 18/19 mm MDF board exterior grade with 6 mm thick teak wood beeding of approved/ existing shade

Table bed side steel (FD/E6/MAP/15 (R))

a) Table Top 18/19 mm MDF board exterior grade with PVC beeding of approved/ existing shade

b) Table side as per drg

c) Drawer complete as per drg

d) Knob/ handle as per drg

e) Back ply as per drg

f) Telescopic channel of drawer

e) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Rack shoe steel (FD/E6/MAP/02 (R))

e) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Charpoy GI Ply top (FD-220)

a) Removing the existing U/S long rail and S&F new long rail of 32 mm dia GI Pipe including both end threaded suitable for fixing elbow complete all as shown in drg as specified and directed

b) Removing U/S broken short rail and fixing new short rail made out of old broken long rail obtained from 277 above including both end threaded suitable for fixing elbow complete all as shown in drg as specified and directed

c) Removing U/S broken leg and fixing new leg made out of old broken long/short rail obtained from 277 & 278 above including one end threaded suitable for fixing elbow complete all as shown in drg as specified and directed

d) Removing of U/S elbow 3 way and supply & fix new GI elbow 32mm dia ISI marked all as shown in drg as specified and directed

e) Removing of U/S checknut and supply & fix new checknut all as shown indrg as specified and directed

f) Removing existing U/S plywood top from charpoy GI pipe and supply and fixing new 12mm thick plywood ISI marked BWP IS-710 grade including refixing of existing stiffner with screw at equal distance to GI pipe frame of charpoy and fixing the plywood top with MS machine made screw bolt with washers and one hexagonal nut of 50 mm long dia of neck 5 mm and applying one coats of synthetic enamel paint to stiffeners after one coat of red oxide primer complete all as shown in drg as specified and directed

g) 900 mm long MS angle iron 25 x 25 x 3 mm of size, rest on both long rails and fixing the MS angle iron duly welded with long rail complete all as specified and directed

h) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Bed Hard ply top steel (FD/E6/MAP/08 (R))

a) 12mm thick BWP IS-710 Marked plywood as per size and drg

b) 18 mm prelamineted MDF Board for Head/Foot rest as per drg

c) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Bed plywood top/ Hard bed (FD-246, FD-245, FD-213)

a) Long rail as per drg

b) Short rail as per drg

c) Foot board as per drg

d) Head board as per drg

e) Middle Stiffeners as per drg

f) 12mm thick BWP IS-710 Marked plywood as per size and drg

g) Removing unserviceable Veneer from foot board both side S&F new Veneer 4mm thick both side of footboard as per drg

h) Removing unserviceable Veneer from head board both side and S&F new Veneer 4mm thick both side of head board as per drawing.

j) Leg as per drg

Charpoy IP with plywood top (FD/MAP-II/01)

a) 12mm thick BWP IS-710 Marked plywood as per size and drg

b) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Charpoy IP folding with plywood top (FD-388)

a) 12mm thick BWP IS-710 Marked plywood as per size and drg

b) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Teapoy Varandah (FD-383 255, FD/E6/MAP/17)

a) Table Top with 18/19mm thick MDF board exterior grade 6 mm thick teak wood beeding of approved/ existing shade

b) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

Table Computer (FD/E6/MAP/03)

a) Table Top with 18/19mm thick MDF board exterior grade 6 mm thick teak wood beeding of approved/ existing shade

b) Spot welding of broken joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg.

c) Telescopic channel of key board

d) Telescopic channel of drawer

e) Base of table with 18/19 mm thick MDF board exterior grade 6 mm thick teak wood beeding of approved/ existing shade

f) Replacement of key board tray made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS

g) Replacement of mouse tray made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS

h) Replacement of shelf top with vertical sides made of pre lamineted MDF board 18 mm thick exterior grade confirming to IS

M&L for preparing of old painted surface, removing dents & bents if required of following items and applying two coat of synthetic enamel paint of TA GREY/OG/BLACK or Existing color on all external surface complete.

Almirah large 1/2 H-1/2 S (FD-114(M), FD/E6/MAP/18)

Almirah Cadet steel (WDF 49/07)

Almirah large Steel with shelves (FD-104, 67(M), 1031, 351, GE (M) V-608)

Almirah Steel Med with shelves (FD- 67(M), FD-1032, FD-243, FD-350)

Bed Hard ply top steel (FD/E6/MAP/08 (R))

Charpoy IP with ply wood top (FD/MAP-II/01)

Charpoy IP folding with ply wood top (FD-388)

Book Case Steel / Book Shelf open steel all type (FD-90(M),FD-69(M), FD-1028)

Chair CB steel with Arms FD-75(M)

Chair writing steel (MAP) /Chair visitors (FD/E6/MAP/12, TP)

Table Bed Side Steel (FD/E6/MAP/15(R))

Chair Verandah (FD-256, 359)

Locker Bed side Steel (FD 1029, FD-127(M), WDF-18/07, GE/G/F/04/2000)

Rack shoe steel (FD/E6/MAP/02 (R))

Rack Side steel three space /four space (FD-1023, 97, WDF/27)

Table computer (FD/E6/MAP/03)

Stool steel 305x305x510mm/760mm (FD 81)

Table Office Offr Steel (FD-84 (M), FD-1003)

Table Office Clerk Steel (FD-84 (M), FD-1004)

Tepoy Varandah (FD-255, 383, FD E6 /MAP/17)

Table 3 x 2 steel (FD-1008)

Rack adjustable Steel with shelves/ Rack P/Hole(FD-106(M), 1039,TP)

Rack Six Tier Steel with shelves(FD-1038)

Rack four Tier Steel with shelves(WDF-54/07)

PVC Shoe for all types of Bed, Tables, Chairs, Teapoy Verandah, Table bed side etc. (FD/E6/MAP/08(R), FD/MAP-II/01, FD-388, FD-75(M), FD/E6/MAP/15(R), FD-256, 359, FD/E6/MAP/02(R), FD/E6/MAP/03, FD-84 (M), FD-1003, FD-1004, FD-255, FD-383, FD/E6/MAP/17, FD-1008

SARGAM ENTERPRISES (BID ID -3202221)

Mahesh Traders (BID ID -3199954)