WBPWD/SSE/SWEC/NIQ136/2025-26

Supplying and fixing 415 V, 63 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S&F 3 nos. DIN type HRC fuse as per rating. [Make:- L&T (Lauritz Knudsen)/Siemens/Havells]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 4 way [Enclosure 607715] Incomer:- 415 V 4 Pole 63 A MCB Isolator - 01 Nos Outgoing:- 240 V 1 Pole 6-32 A MCB [Breaking capacity 10kA & C characteristics]- 12 Nos [Make:- Legrand/Schneider/Seimens]

Supplying and fixing double door SPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+16 way [Enclosure 607713] Incomer:- 240 V 2 Pole 40 A MCB Isolator - 01 Nos Outgoing:- 240 V 1 Pole 6-32 A MCB [Breaking capacity 10kA & C characteristics]- 16 Nos [Make:- Legrand/Schneider/Seimens]

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [Make:- Finolex/Havells/RR Kable / Polycab/Gloster] partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]

Average run 9 mtr.

Average run 8 mtr.

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire [Make:- Finolex/Havells/RR Kable / Polycab/Gloster] in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish (on board)

Supply & Delivery of twin LED Tube light fittings (Make- Signify (Philips), Cat No. TMC-502 2XT-LED 22W or equivalent model of CG Fittings- IGP162 LT8-16 2 x T8 with 02 Nos LED TUBE Philips Cat No- Mas LEDTube 1200mm 18W 865 T8 I – 2100lm /Crompton- Cat No- LTB-20-865-(2) or equivalent model of Havells/Wipro)

Supply & delivery of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod, Canopy, fork incl S & F of P - 2 type capacitor as per IS specification & proper Manufacturer certificate of the capacitor and Safety Wire (supplied at the time of delivered the fans ) etc. without regulator, (Make- Usha 1200MM STRIKER PWD ISI 1 STAR (Safety Wire & S3 Capacitor) Br /Orient Electric- New Breeze (5yrs warranty),1200 mm sweep; 44W; 320 rpm; 225 cmm; 3 star ac ceiling fan or equivalent model of Crompton Greaves and as per direction of EIC as per direction of EIC.

Supply and delivery of 9"(230mm), 1370 RPM, 40 Watt Heavy duty AC Exhaust fan incl. necy., all connection. [Make- EPC/As per the choice of EIC ]

Supply and Delivery of 230 V, 50 HZ, 450 mm, 70 Watt WALL BRACKET AIR CIRCULATOR FANS ( Make:- EPC / Crompton /Orient Electric)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For Al

23 cm Exhaust fan (9'')

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Supply & Fixing 240 V, 2 nos 6A, plug socket with separate 2 nos 6A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150 mm x 100 mm x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying & Fixing 240 V AC/DC superior type Ding- dong Call Bell (Anchor) on HW board incl. S&F HW board.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire [Make:- Finolex/Havells/RR Kable/Polycab/Gloster] through cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F 19mm dia 3mm thick heavy gauge polythene pipe without continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

3 x 22/0.3 (1.5 sqmm) ( for SP)

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) as ECC ( for CB,PP)

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) as ECC ( for AC)

2 x84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) as ECC ( for SPNDB)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire [Make:- Finolex/Havells/RR Kable/Polycab/Gloster] through cutting channel of 43 mm x 43 mm size on masonry wall incl. S&F 2 no 25 mm dia 3mm thick heavy gauge polythene pipe without continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

4 x 126/0.4 (16 sqmm) + 2 x 80/0.4 (10 sqmm) as ECC ( for PDB)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on 100mmx100mmX65mm sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy.Connections.

Supply and Fixing of Timer DB (concealed in wall or Surfaced as per the site condition) 1) 230V, Upto 16 A capacity 24 Hrs Analog Electromechanical Time Switch (Make-Lauritz Knudsen (L&T) Cat No:- AUTS03ANA00/Siemens/Schneider) 2) 2 Pole Power Contrcator (L&T-MNX 32-2P Cat No- CS90241/Siemens/Schneider ) - 01 Nos 3) 32A SP MCB. [Make-Siemens/Schneider/Lauritz Knudsen (L&T) 4) 32A DP Isolator. (Make-Siemens/Schneider/Lauritz Knudsen (L&T) 5) Toggle Switch. (Make-Siemens/Schneider/Lauritz Knudsen (L&T) or equivalent make) 5) (2+16 Way) SPNDB (Make-Siemens/Schneider/Lauritz Knudsen (L&T) 6) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar etc with this box for termination of power. 7) The complete arrangement must be wiring by 1/2.5/4/6 Sq mm PVC insulated Cu wire(Make:- Gloster/Polycab/Havells) with suitable length incl socketing /lugs etc as per requirement & direction of EIC (Make-Siemens/Schneider/Lauritz Knudsen (L&T)/Legrand/ABB)

Supply & Delivery of Hi-Wall Split Air Conditioner having the following specification:- 1) Cooling capacity Nominal :- 1.9/2.0 TR ( Ton of Refrigeration) 2) BEE Star Rating: Minimum 2-Star (ISEER ≥ 3.8) 3) Refrigerant- R410A/R32 4) Compressor- Rotary/Scroll 5) Evaporator & Condensor Coil : Copper 6) Operating Outdoor Temparature = 52°C and above 7) Power Supply- 230 V, 50 HZ (Tolerance as per applicable standard) 8) Cordless Remote Arrangement with all modernized provision of temperature setting, Fan speed option (Low/Medium/High) Auto Swing. (Make- O-General Cat No. ASGA24BMAA-B (R32) / Mitsubishi Electric MS/MU- AGZ24VF or Equivalent model of Mitsubishi Heavy Industry) (On-site five (05) year warranty on Compressor, and one (01) Year comprehensive warranty certificate shall be submitted to the Engineer-in-Charge (EIC) prior to execution of the work )

Supply andlLaying of 5/8” or 1/2"& 1/4" dia (Soft drawn) Cu. Pipes (As per standard) with tube thickness 0.6mm incl. 9mm thick nitrile rubber insulation, , insulation tape, fastner, etc as necessary as per direction of EIC. (Copper Pipe Make: Nippon/Uniflow/Rajco/Venam/Camiflow/Godrej & Nitrile Rubber Insulation Make: A-flex/K-flex/Supreme)

Supply and Laying of 3/4 Core 2.5 sqmm PVC insulated & unarmoured copper wire (Make:- Havells/Polycab/RR Kable/Finolex/Gloster ) for 2.0/2.5 Tr. Split AC machine with max saddling with max 1 mtr distance as per the direction of EIC.

Supply, laying and fixing of condensate drain water pipe for split AC machine of 19 mm dia , including all required fittings and accessories such as bends, elbows, tees, couplers, wall sleeves, hangers, supports, clamps, anchors, providing proper slope for free flow of condensate water, and making good the damages, complete as per direction of Engineer-in-Charge. (Make: Any reputed brand /as per choice of Engineer-in-Charge)

Installation, Testing & commissioning of 1.5/1.9/2.0/2.1 Tr. Split type AC both indoor/ outdoor unit incl. S& F of 40 X 40 X 5 mm MS angle iron frame for installation of ODU and sealing of the holes in wall created during the copper pipe connection between IDU & ODU by proper sand-- cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages to complete the instn as per direction of EIC.

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for AC installation, per storey of building per vertical run

Supply & Fixing of 250 V 90 WATT LED Flood light luminaire on the top of the pole or on masonary structure, complete with all accessories with single piece die cast alluminium housing and heat resistant toughened glass with IP 66 protection, minimum Efficacy > 120 LPW and with in-built SPD protected out door luminaires embossed with manufacturer's logo and must have 5 year warranty from OEM. [Make:- Philips LED Cat No. BVP282 LED120 CW FG SY5WB 100W V1 / Crompton Cat No. CFS- 504-100-57-60D-HL2-GL-NSG equivalent model of Wipro]

Supplying & Fixing PVC waterproof type looping cable box (Make: SINTEX/As per the Choice of EIC ) size minimum 200x150x100 mm deep comprising of one 250 V 15 A kit- kat fuse unit, one NL on porcelain insulator, two provision of compression type brass cable gland for upto 4- core 16 sqmm PVC/A cable and having lined with rubber gasketted top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole, including S&F 40x6 mm thick, suitable "C" type 4mm thick MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc

Supply and drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire through 13/19mm thick Polythene pipe. [Make:- Finolex/Havells/RR Kable / Polycab/Gloster]

Supply and delivery of 2 Core 10 sqmm. XLPE Insulated, Cores Laid Up, Thermoplastic Tape Inner Sheathed, Unamoured/ Armoured and Extruded PVC Type ST2 Outer Sheathed As Per IS‐7098 (Part 1) 2011 with Up To Date Amendments, Aluminium armoured cable. [Make:- Finolex/Havells/RR Kable / Polycab/Gloster]

Laying of cable upto 2 core 10 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

2 core 10 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

2 core 10 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

2 core 10 sqmm

Painting of Steel Tubular Pole of 2.0 mtr length and no. of coats of paint, with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 8.5 mtr. long pole i) 1st coat of synthetic paint over 1 coat of RO priming, II) 2nd coat of synthetic paint over 1st coat.

Supply and delivery of 4 Core 70 sqmm. XLPE Insulated, Cores Laid Up, Thermoplastic Tape Inner Sheathed, Unamoured/ Armoured and Extruded PVC Type ST2 Outer Sheathed As Per IS‐7098 (Part 1) 2011 with Up To Date Amendments, Aluminium armoured cable. [Make:- Finolex/Havells/RR Kable / Polycab/Gloster]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

4 core70 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

4 core 70 sqmm

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.

4 core 70 sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground leve l(TATA-Medium)

Excavation of soil for installation of Earth Electrode and filling & ramming.(morrum soil)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

S & f motor starter suitable for 240V single phase 3HP pump motor set with over load relay range 13-22 A fix on MS angle iron frame on wall as per GS.[ for pump] [Make: L&T (Lauritz Knudsen) Model MU-2P DOL Cat No. CS90319KODO/ABB/LEGRAND/SIEMNS/HAVELLS]

S & F of Glow Sign Board(7 ft x 3 ft x 8 inch depth) made from 50X50X6 mm MS angle, 40 x 6mm MS flat having the provision for opening from backside by 50 X 50 X 6mm MS angle, 3 nos hinges duly welded. The board should be enclosed from out side by 20 SWG GI SHEET except the front. The entire board should be painted with one coat of synthetic enamel paint over one coat of RO primer. The front facia of the board is to be made with 2mm thk White PVC sheet of export quality having suitable size and to be fixed on the front structure by S & F suitable size aluminium angle, SS Screws. The matter is to be incripted on a whole best quality venyle sheet as per approved size, colour & matter(matter will be provided from authority office) which will be pasted properly over the PVC sheet. the Glow Sign Board consist with S&F of 4 nos 2X18W ft W LED tube Light only (Make: Signify(Philips) /Crompton /Wipro)) fixed with clamps flat patti fitting incl wires, and inter connection etc as reqd. for proper illumination & necy internal wiring by single core copper wire etc as per direction of EIC.

Please Enable Macros to View BoQ information