SPECIAL REPAIR TO ROAD FROM BLDG NO P 893 TO URC ARMY AD COLLEGE INCLUDING CERTAIN EM SANCTION WORKS AT GMS UNDER GE I GOS

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed

Excavation over areas not exceeding 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over areas exceeding 1.5m deep and not exceeding 3.0m deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

Excavation in trenches not exceeding 1.5m wide andadditional 1.5 m or part thereof in depth beyond the first 1.5 m and getting out in soft/loose soil complete all as specified and directed

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed

M&L for RCC, M-30 Design Mix Concrete (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed . Note - Reinforcement and form work shall be measured and paid separately.

Formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed

M&L for RCC, M-30 Design Mix Concrete (using 20mm graded aggregate) as inColumns,pillars,piers,posts and struts etc complete all as specified and directed.

Formwork to Square,rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed

M&L for RCC, M-30 Design Mix Concrete (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed

M&L for RCC, M-30 Design Mix Concrete (using 20mm graded aggregate) as inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in getting out soft/loose soil complete all as specified and directed

Removing surplus excavated earth (soil) to a distance n. exc 50 m & depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F Mild steel TMT bars 8mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:6 in cement mortar complete all as specified and directed

M & L 40mm thick PCC 1:2:4 damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finishing even and smooth without using extra cement but using water proofing compound complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling finishing even and smooth without using extra cement complete all as specified and directed.

M&L moorum / Red bajri filling in floors or pavings, laid in layers n.exc15 cm thick spread levelled and rammed incl watering etc complete all as specified and directed

M&L Hard core of gauge n.exc 63 mm, deposited, spread, levelled in layers not exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed

M & L 100 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggreates as in flooring finished even and fair complete all as specified and directed.

M&L 50 mm thick PCC 1:3:6, type C-1 using 20 mm graded stone aggregate as in plinth protection, surfaces finished even and smooth with out using extra cement complete all as specified and directed. (Note- Joint 12 mm wide to the full depth of pcc shall be provided at every 3 metres and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. cost of this provision shall be deemed to be included in the quated rate for concrete in plinth protection

M&L for cement concrete tiles of size 250 mm x 250 mm x 20-22 mm thick machine pressed set jointed and pointed in neat cement slurry in floor and cut and polished with grey cement and pigment, including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed

M&L for preparation of new plastered surface of wall and applying two coats of cement based paint over a coat of white wash complete all as specified and directed

M & L for preparation of newly plastered surfaces of wall and applying 2 mm thick wall care putty complete all as specified and directed

M&L for applying two coats of oil bound distemper on wall or concrete surfaces over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed

Supply only water proofing compound of approved make.

Supply and fixing of steel rolling shutters as per IS-6248-1979, made of required size MS laths interlocked together through their entire length and jointed together at the ends by end locks mounted on shafts (50 mm dia) heavy duty, thickness of lathe 1.20mm, grade II springs, guide channel 3.15mm thick, bottom plate 3.15mm thick gear oprated shutter with bevel gear box and crank handle, hood cover 1.20mm and 1 coat of red oxide primer including necessary concrete bed blocks with PCC 1:3:6 of size wall width x 150mm x300 mm and finishing with plaster 15mm thick in CM 1:4 finished even and smooth complete all as specified and directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed, Fe 410 -W (Gde- E- 250) quality- A

M&L preparation of new surfaces of steel and iron surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L 10 mm thick rendering in CM 1:3 , mixed with water proofing compound, on concrete surfaces of roof , surface finished even and smooth. (supply only of water proofing compound shall be measured and paid seperately) complete all as specified and directed

M & L for water proofing treatment for roof slabs including crumple joints by applying bitumen primer @ 0.3 ltr/sqm then applying bot blown 85/25 @ 1.20kg/sqm and laying APP modified bituminous 3mm thick with non oven polyester core water proofing membrane laid and bonded to the sub-strata by heat process, over lap shall be sealed by flame torch application not less than 3.2kg/sqm with over lap of 100mm and end lap of 150 mm and APP membrane shall be covered with bituminous based aluminium paint @0.2kg/sqm on top complete all as specified and directed.

M&L plain, solid, 2nd cl hard wood straight Chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with pinned at joint etc complete all as specified and directed

S&F factory made UPVC white colour fixed window/ventilator made of extruded profile with wall thickness of 2.3mm (+-2mm). Window profile with hollow section with multi chamber. Frame (60mm X58mm). T profile (one vertical length in between two shutters) (60mm X 74mm). Glazed bead (35mm X 20mm) will be mitered cut and fusion selded at all corners including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 +-0.2mm thick glavanised steel frame (28mm X 21.5mm), T profile (27mm X 17mm) to be inserted in repair profile. Frame will be fixed to the wall with 8mm X 100mm long fasteners. 5.5 mm thick glazing with ordinary quality glass and gauge as required at site. (Note : The unit rate includes the cost of glass, gauge and all other connected accessories) area n.exc 1.00sqm each.

S&F 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 75 X 75mm complete all as specified and directed

S&F 30mm thick 2nd class soft wood (Kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8 , Clause 8.24 (b), supplied & fitted to chowkats.

S&F 35 mm thick 2nd class soft wood (Kail) plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat.

S&F MS flat iron as in hold fast etc and similar work.

M&L PCC 1:2:4 type B1 (using 20mm graded stone agg) as in anchoring hold fast etc bed plate etc complete all as specified and directed

S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

M&L for preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty complete all as specified and directed

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.4 mm complete all as specified and directed

M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L 100 mm thick Cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggreates as in flooring finished even and fair complete all as specified and directed.

M&L sand filling under floors or in foundations including water and consolidation complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size fixing with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, bed block etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L Point wiring complete with PVC insulated and unsheathed, flame retardant low smoke 1100 volt grade electric cable of 1.5 Sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC concealed conduit not less than 19mm dia, and wall thickness 2mm, with suitable GI flush metal boxes (not less than 1.00mm thick) of suitable sizes including earth dolly with 3mm thick plastic laminated sheet top cover of approved colours including 1.50 Sqmm PVC insulated & unsheathed copper cable as continuous earth wire with all accessories including lugs required, complete all as specified and directed for the following :- (a) One light/fan point controlled by one way switch 5 Amps

(b) One 5 pin socket outlet, 5 Amps, Independent board

M&L Point wiring complete with PVC insulated and unsheathed , flame retardant low smoke 1100 volt grade electric cable of 4 Sqmm (nominal) area) with multi stranded copper conductor single core in and including rigid PVC concealed/ surface conduit not less than 20 mm dia and wall thickness 2mm, with suitable GI flush metal boxes (not less than 1.00 mm thick) of suitable sizes including earth dolly with 3mm thick plastic laminated sheet top cover of approved colours including 2.50 Sqm PVC insulated & unsheathed copper cable as continous earth wire including lugs required for one multi purpose two in one 5 and 15 Amp switch socket on independant board complete all as specified and directed

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F Switch piano flush button single pole one way 6 Amps, complete all as specified and directed.

M&L for Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

M&L for Switch socket combination 2 in 1, 5 A flush type complete all as specified and directed.

M&L for Sheet metal enclosure factory made double door for mounting MCBs with 200A rated bus bar capacity TPN 12 way AC 415 volts with IP-43 protection, complete all as specified and directed.

M&L for Ceiling rose 3 terminals of PVC/ polycarbonate, as per relevant IS code, ISI marked isolated body complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less'than 1.5 meters below normal ground level, connected to galvanised iron earth lead wire of 4 mm dia GI pipe mediam grade 15 mm dia upto 7.5 mtr including provn of conrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25x25x3 mm with lugs 02 Nos and with 6.0 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for earth plate, common sald and charcoal filing, test point made out of Bronze/ Gun metal with fixing arrangement, funnel, wire mess and excavation/ earthwork in hard/ dense soil, to a distance not exceeding 50 mtr all as per electrical plate No 3 of SSR 2010 Part I and connecting to earth test point all as specified or indicated incl testing on completion.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of capacity 40 to 100 Amp TPN and current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fixing street light fitting bracket with new brackets made out of 32mm bore GI pipe, light grade, tubing bend to shape, 1.2 metre long, fixed to pole/wall, painting with two coats of aluminium paint over a coat of red oxide primercomplete, all as specified and directed.

S&F Sub class ‘B brick, old size, as cable protection cover, laid dry, flat, transversally along the length of cable, on sand cushioning, with width equal to the length of the brick, complete all as specified and directed.

S&F Galvanised iron water tubing (ISI marked) 80 mm bore (light grade) with and including all fittings (ISI marked ) such as sockets, bends, elbows, unions, tees, diminishing pieces etc laid in trenches/under road/along pole or fixed to walls, complete all as specified and directed.

Supply, laying and testing LT cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade cross section area 25 sqmm 3.5 core complete laid in trenchers, duct, passing through pipe, fixed to poles complete all as specified and directed.

Boring of holes horizontally for laying of 80mm dia pipe (minimum depth 0.60 Mtr from top level) under road, Pavement, hard standing complete all as specified and directed.

HARAGOURI SUPPLIERS

M/S JAGANNATH SASMAL

M/s MAA BHAIRABI ENTERPRISES

M/S SIWALIK AND CO

V.Venkata Ramaiah

M/S. KISHAN ENGINEERING

M/S S.K GHOSE