MAINTENANCE OF BUILDINGS AND INTERNAL SERVICES INTERNAL WATER SUPPLY, SANITARY FITTINGS, REPAIRS TO WOODEN AND ALUMINIUM JOINERIES, ROLLING SHUTTERS AND PLINTH PROTECTION, CHAJJAS, FLOORING AND CLEANING OF WATER TANKS AT 26ED MP CAMP UNDER GE (AF)

Amount

Supply and Fixing 500 litres Capacity rotational moulded polyethylene water storage tanks triple layered ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position including taking down the old tank complete all as specified and as directed by Engr-in-charge.

Supply and Fixing 750 litres Capacity rotational moulded polyethylene water storage tanks triple layered ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position including taking down the old tank complete all as specified and as directed by Engr-in-charge.

Supply and Fixing 1000 litres Capacity rotational moulded polyethylene water storage tanks triple layered ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position including taking down the old tank complete all as specified and as directed by Engr-in-charge.

Supply and fixing in repairs High density polyethylene pipes (HDPE) 15mm bore of pressure rating 6 kgf/cm2 with all fittings and fixed complete to walls and ceiling or laid in floors including taking down old corroded GI pipe complete all as specified and as directed by Engr-in-charge.

Supply and fixing in repairs High density polyethylene pipes (HDPE) 20mm bore of pressure rating 6 kgf/cm2 with all fittings and fixed complete to walls and ceiling or laid in floors including taking down old corroded GI pipe complete all as specified and as directed by Engr-in-charge.

Supply and fixing in repairs High density polyethylene pipes (HDPE) 25mm bore of pressure rating 6 kgf/cm2 with all fittings and fixed complete to walls and ceiling or laid in floors including taking down old corroded GI pipe complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15 mm bore Stop valves, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union fixed of fixed all as specified and as directed by Engr-in-charge.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:4) finished even and fair without using extra cement including taking down hacking of existing old plaster surfaces complete all as specified and as directed by Engr-in-charge.

Material and labour for Rendering 10mm thick on fair faces of concrete surfaces of ceilings in CM (1:6) finished even and fair without using extra cement including taking down hacking of existing old plaster surfaces complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 4.0 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane including hacking out old broken glass of any thickness, size quality or description from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads etc complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane including hacking out old broken glass of any thickness, size quality or description from metal frame including punching or drilling out old glazing pins / spring clips etc complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 20mm dia brass CP towel rail 60cm long including brackets complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15 mm bore bib taps, standard of PTMT any colour screwed, for iron pipe and fixed (Minimum weight 90 gms) all as specified and as directed by the Engr-in-Charge.

Supply and Fixing in repairs 15 mm bore bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot" or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15mm dia brass CP mixer for mixing hot & Cold water screwed down for iron pipe and fixed screwed for iron pipe complete all as specified and directed

Supply and Fixing in repairs Pillar taps of PTMT 15mm dia any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms / 20mm - 125 gms) complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 200 mm long Aluminium anodised, barrel tower bolts matt finished of extruded section all as specified.

Supply and Fixing in repairs 150 mm long Aluminium anodised, barrel tower bolts matt finished of extruded section all as specified.

Supply and Fixing in repairs 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and Fixing in repairs butt hinges, medium weight cold rolled mild steel, 100mm size complete all as specified.

Supply and Fixing in repairs butt hinges, medium weight cold rolled mild steel, 75mm size complete all as specified.

Supply and Fixing in repairs matt finished aluminium anodised alloy handles, cast type, of size 150mm complete all as specified.

Supply and Fixing in repairs matt finished aluminium anodised alloy handles, cast type, of size 125mm complete all as specified.

Supply and Fixing in repairs chromium plated grating, of size 100mm complete all as specified.

Supply and Fixing in repairs Vitreous china, squatting pan, ‘Orissa’ pattern size 580 x 440 mm white with integral foot rests and ‘P’ (or) ‘S’ Trap complete including connection to trap and flushing pipe, anti syphonage pipe etc but excluding flushing cistern and flush pipe including filling up with required concrete in sunken floors, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs Vitreous china wash down water closet pan (pedastal pattern) white pattern (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

Supply and Fixing in repairs PVC valveless syphonic action type low level flushing cistern of 10 ltrs capacity with inlet, ball valve, float, flush pipe and handle including brackets etc, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs Vitreous china WHB white of size 580x450mm including pillar cock CP fancy type 15mm bore, CP waste coupling, 32mm dia PVC waste pipe, brackets and PVC connection etc. including 8mm dia GI rack bolt at rear side of WHB and making good to disturbed portion in Cement Mortar 1:6 with necessary grouting and finished to match the existing surface, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs Waste fitting brass chromium plated 32mm dia for wash hand basin etc with long screwed shank and fly nuts, flange and bedded in red lead cement and other end fixed, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs PVC waste pipe 32 mm dia for wash hand basin / half stall urinal, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 32mm dia waste coupling of PTMT suitable for WHB (half or full threaded), (Minimum weight - 45gms), bore dia of discharge pipe 32 mm, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 40mm dia waste coupling of PTMT suitable for urinals, (Minimum weight -60 gms) bore dia of discharge pipe 40mm dia (half or full threaded), complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs Mild steel 4 levers Mortice lock, vertical type of size 65 mm, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body), complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs door closer hydraulically regulated designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg of aluminium (Die cast body), complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Material and Labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer all as specified and directed.

Dismantling of tiles of any description in floors and skirting including cement mortar and removing rubbish off the premises complete all as specified and as directed.

Material and Labour for Vitrified tiles light shade of size 600 x 600mm x 10mm thick in floors fixed with approved adhesive 5mm average thick as per manufacturer's instructions and pointed in white cement mixed with colour pigment to match the colour of tiles over screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes and complete all as specified and directed.

Material and Labour for vitrified tiles light shade of size 600 x 600 x 10mm ( as required at site ), 10mm thick on vertical surfaces such as skirting, set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the colour of tiles over 10 mm thick backing coat in Cement Mortar 1:4 complete all as specified and as directed by Engr-in-charge.

Material and labour for coloured non skid ceramic tiles, size 300 x 300mm, 7mm thick in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the shade of floor tiles over screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes all as specified and as directed.

Material and Labour for Coloured glazed ceramic tiles of size 300 x 200 x 7 mm or 400 x 100 x 7 mm thick in vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over 10 mm thick in Cement Mortar 1:4 complete all as specified and as directed.

Dismantling of existing aluminium partition including glazing, pre-laminated particle board etc complete all as specified and as directed.

Supply and Fixing Anodised aluminium frame for partition wall with one or more rebates, including jointing cleat for fixing etc, glazing clips, rubber packing complete all as specified and as directed (Note : Glazing and particle board shall be measured and paid separately).

Supply and fixing prelaminated particle board 12mm thick interior grade, prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame work including dismantling old unserviceable boards all as specified and directed.

Supply and Fixing in repairs 5.5mm thick sheet glass ordinary quality alongwith EPDM rubber gasket all round the glass edges n.exc.0.50 Sqm in each pane and fixed to aluminium frame work complete all as specified and directed.

Supply and Fixing in repairs 150 mm (overall length of cover plate) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed all as specified and directed.

Supply and Fixing in repairs 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, laid in floors or in trenches with PVC clamps and saddles complete all as specified and as directed.

Supply and Fixing in repairs health faucets Chromium plated (hand shower) with 8mm dia 1.50m long flexible hose, wall hook fixed with brass screws and all accessories complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n. exc.15 cm thickness (below or above ground level) complete all as specified and directed.

Material & Labour for 40 mm thick Plain Cement Concrete 1:2:4 type B-1, using 20 mm graded stone aggregate finished fair and even complete all as specified and directed.

Material & Labour for 50 mm thick Plain Cement Concrete 1:2:4 type B-0, using 12.50 mm graded stone aggregate finished fair and even complete all as specified and directed.

Material and Labour for Machine cut Kota Stone slab of any size 20 to 25mm thick in riser of steps, skirting, dado and pillar including demolition of same laid, bedded and pointed in any mortar rubbing and polishing completed all as 'specified and as directed.

Material & Labour for 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finish all as specified and directed.

Disconnecting existing tanks capacity exc. 250 n.exc 500 litres, setting aside (lowering if required) for Cleaning and removing all scale, dirt etc from tanks and from mouth of circulationg pipes etc of over head water tank including washing with cleaning agent like washing powder or suitable saop powder etc and date of cleaning to be written with synthetic enamel paint letters on the side of the tank complete and refixing in position complete all as specified and directed.

Disconnecting existing tanks capacity exc. 500 n.exc 1000 litres, setting aside (lowering if required) for Cleaning and removing all scale, dirt etc from tanks and from mouth of circulationg pipes etc of over head water tank including washing with cleaning agent like washing powder or suitable saop powder etc and date of cleaning to be written with synthetic enamel paint letters on the side of the tank complete and refixing in position complete all as specified and directed.

Supply and Fixing in repairs PVC covers suitable for existing rotational moulded polyethylene water storage tanks (cylindrical Each vertical with closed top) completed incl fixing arrangements all as directed by Engr-in-charge

Supply and fixing in repairs 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm - 210gms/25mm-455gms/ 40mm-690gms) all as specified and as directed.

Supply and fixing in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm - 210gms/25mm-455gms/40mm-690gms) all as specified and as directed.

Supply and fixing in repairs Gun metal gate valve with iron wheel head ISI marked screwed both ends complete for 20 mm dia iron pipes.

Taking down Chowkats with shutters of any description (with out taking off shutters from the frames) not exc 1.5 Sqm each Complete all as specified and directed.

Taking down Chowkats or frames with shutters( with out taking off shutters from the frames) exceeding 1.5 Sqm but not exc 4 sqm each Complete all as directed.

Taking down Shutters of any description n exc 1 sq. m each Complete all as specified and directed.

Taking down Shutters of any description exceeding 1 Sqm but not exc. 2 Sqm each Complete all as specified and directed.

Material and Labour for Second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints for door and window chowkhats and other frames all as specified and directed.

Supply and Fixing Prelaminated Particle board 18mm thick exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame work Complete all as specified and directed.

Supply and Fixing 35mm thick Factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and Fixing IInd Class Hard wood, 30mm thick, Factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a); supplied and fitted to chowkats complete all as specified and directed.

Supply and Fixing IInd Class Hard wood, 30mm thick, Factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(b); supplied and fitted to chowkats complete all as specified and directed.

Supply and Fixing IInd Class Hard wood Plain fillets, exc. 3 Sq.cm and n.exc. 6 Sq.cm, square, rectangular or triangular in section, clean sawn, secured and fixed with screws Complete all as specified and directed.

Supply and Fixing of Solid PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelaminated PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube all as specified and as directed.

Supply and Fixing Factory made Solid Panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all specified and as directed.

Supply and Fixing Butt hinges, medium weight cold rolled mild steel, 125mm size Complete all as specified.

Supply and Fixing Butt hinges, extruded anodised aluminium alloy with galvanised mild steel hinge pin 75mm size type B-21 Complete all as specified.

Supply and Fixing 100 mm long Aluminium anodised, barrel tower bolts matt finished of extruded section all as specified.

Supply and Fixing 150 mm long Aluminium anodised, barrel tower bolts matt finished of extruded section all as specified.

Supply and Fixing aluminium anodised alloy handles, cast type, of size 100mm complete all as specified.

Supply and Fixing inrepair 150 mm (overall length of cover plate) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed all as specified and directed.

Supply and Fixing Continuous (piano) hinges, brass, bright finish or electrogalvanised of Width of flaps (when open) in 40mm complete all as specified.

Supply and Fixing inrepair Mild steel helical spring, 375 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and Fixing Steel windows with double leaf ( Glazed / gauzed ), made out of box section of size 60 x 40 mm, 1.25 mm thick, side hung shutters including box type hinges with steel handle, and steel peg stay, tower bolts, guard bars, etc., Complete with glazing bars and locking arrangements welded to shutters including necessary beading with MS flats for securing wire gauze etc., complete all as specified and as directed

Material and Labour for Welding in repairs not exc 2.5 cm in length, thickness of Metal to be welded not exc. 6 mm complete all as specified and as directed.

Material and Labour for Welding in repairs not exc 2.5 cm in length, thickness of Metal to be welded exc. 9 mm but not exc. 20 mm complete all as specified and as directed.

Supplying and Fixing 4.8 mm thick sheet glass ordinary quality and glazing with oil putty fixed with PVC / neoprene gasket, angular glazing aluminium beads, rubber packing, locking arragements for sliding windows in square n.exc. 0.5 Sqm in each pane for sliding rack with sliding handle including hacking out old broken glass from metal frames Complete all as specified and as directed.

Supply and Fixing inrepair Stainless steel steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm, fixed with tinned tacks, or galvanised wire staples all as specified and directed.

Material and Labour for Cutting holes of superficial area n.exc. 150 Sq. cm into or through brick walls built in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of cement concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

Material and Labour for Plain Cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in bed blocks for fixing of hold fasts and finishing the exposed concrete surfaces of concrete even and fair complete all as specified and as directed by Engr-in-charge.

Material and Labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of aluminium paint complete all as specified and as directed by the Engr-in-charge.

Material and Labour for preparation of new steel surfaces or previously untreated surfaces, not otherwise described, exceeding 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer, Complete all as specified.

Material and Labour for preparation of new wooden surfaces over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed.

Material and Labour for Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Complete, as specified, supplied and fixed

Material and Labour for Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Complete, as specified, supplied and fixed

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing rubbish outside MD land all as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete and removing the rubbish off the premises to a distance n.exc.50m complete all as specified and directed.

Demolition of Brick work or Stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles all as directed.

Material and Labour broken stone or boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface all as specified and directed.

Material and Labour for roughening surfaces of old concrete floors by picking, sweeping clean and washing down with water to remove dust, etc. and applying Brushing neat cement slurry with 3.0 Kg of Cement per Sq. metre Complete all as specified and as directed by Engr-in-charge.

Material and Labour for 100 mm thick Plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in subbase for floors complete all as specified and directed.

Material and Labour for Plain Cement concrete 1:2:4, type B-2 (using 40mm graded aggregate) 100mm thick in floors finished cement concrete surface even and smooth using extra cement and making impressions of Expanded metal, whilst the concrete is green all as specified and directed.

Material and Labour for 25 mm thick Plain Cement Concrete (1:2:4), type B0 (using 12.5mm graded stone aggregate) as in floors finished cement concrete surface even and smooth using extra cement complete all as specified and directed.

Material and Labour for Pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10cm in width and setting in mortar complet in CM 1:6 all all as specified and directed.

Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:6) finished even and fair without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and Labour for Preparation of newly plastered surfaces of walls and applying two coats of Cement based paint over a coat of alkali resistant primer all as specified and directed.

Material and Labour for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate for Plinth protection complete all as specified and directed.

Material and labour for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A', Complete all as specified and directed.

P Ramesh and Co