PROVN OF A TEMPORARY SHED BEHIND THE REGISTRY TO BE UTILIZED AS OFFICE AT AFT AND CERTAIN MINOR AND REVENUE WORKS UNDER GE (WEST) LUCKNOW

Amount

Surface excavation n.exc 30 CM deep and averaging 15 CM deep and getting out complete all as specified and directed.

Excavation in trenches n. exc 1.5 wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

M&L for Cement concrete type D-2, 1:4:8 ( 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M & L for 40 mm thick damp proof course in cement concrete 1:2:4 type B-0 (12.5 mm graded stone aggregate to horizontal or vertical surfaces including necessary formwork mixed including WPC as per manufacturer's instruction complete all as specified and directed.

M & L for RCC M-25 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for RCC M-25 as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M & L for RCC M-25 as in Chajjas complete all as specified.

M & L for RCC M-25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surface complete all as specified and directed.

M & L for Formwork to chullah hoods, chajjas, troughs and similar items including edges of rough finished surface complete all as spesified and directed.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions of square/rectangular or poligonals complete all as specified and directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup-ports, overhangs,etc. also splays between floors and beams, etc. complete all as specified and directed.

M & L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

M & L for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section), including distance pieces, cleats etc. confirming to Fe 410w (Gde-250) including cutting, welding etc. complete all as specified and directed.

M & L for brick work using fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6 complete all as specified and directed.

M & L for 15mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished fair and even complete all as specified and directed.

M & L for 15mm thick rendering on brick work in CM 1:4 finished even and fair complete all as specified and directed.

M & L for preparation of new surface of wall and applying two coats of oil bound distemper over 1.5 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying two coats of cement base paint over a coat of alkaint primer complete all as specified and directed.

Supply and Fixing steel Box type Windows/Ventilators with both provisions i.e. glazed and gauzed double panel / single panel shutters, Gauzed shutter shall be fixed in inner side and glazed shutter shall be fixed at outerside of the frame. The section of outer frame shall be 60 x 45 mm, F/S mullion/ transum 60x30x25 mm, F/S shutter frame 50x35x20mm, with handle and stopper of Z sec of size 20 x 25x 20mm The section shall be made of ERW Section of 16 Gause. 02 Nos of Box type hinges 75 mm long 12 mm dia with one part of hinges spot welded with frame and other with shutter for each openable shutter. 04 Nos of flat iron fast shall be welded with each window. 100 mm long handle and 150 mm long tower bolt shall be welded to each openable shutter. 10 mm square guard bar shall be provided @ 125mm c/c.Details shown in CELZ Drawing No LZ/C-TD/130 SHEET NO 1/4 to 4/4. Note: Glass panes and wire mesh shall be measured and paid separately under schedule of items.

S&F Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Pressed steel frames of size 125 x 60mm made of 1.25mm thick PBI sheet for doors with one or more rebates including necessary fixing lugs, lock strike plate etc complete all as specified and directed.

M & L for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply & fix 150mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and directed.

S & F Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed.

Supply & fix 150mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S &F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified.

M & L for PCC type C-0 (1:3:6) using 12.5mm graded stone aggregate as in filling of hollow portion of pressed steel frame etc complete all as specified and directed.

M & L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M & L preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete as directed.

M&L Hardcore of broken stone boulders guage exc 63mm but n exc. 100 mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surfaccomplete all as specified and directed

M & L for 100mm thick cement concrete type D-2, 1:4:8(40mm graded aggregate) as in sub base complete all as specified and directed.

M & L for Vitrified tiles in floor light shade as approved size 10mm thick area of each tile exc 0.18 but n exc 0.38 Sqm over and including 15mm thick in near cement screed(1:6) slurry and pointed incl white or colour cement to match complete all as specified and directed

All as per item 34 above but in verical surfaces set in 10mm thick plaster in CM (1:4) complete all as specified and directed

M & L for Non skid ceramic coloured floor tiles 7-8 mm thick shade as approved and area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors over and including set on 15mm thick in screed bed in cement mortar (1:6) and pointed in neat cement slurry including jointing with white or colour cement to match complete all as specified and directed.

M & L for glazed ceramic colour tiles of size 300 x450mm x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including10mm thick backing coat in CM 1:4 complete all as specified and directed.

S&F 15 mm steel Tubes, 'medium' grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm steel Tubes, 'medium' grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M & L for cutting and chaseing in brick wall built in cement mortar for concealed GI tubing and making good in CM, 1:3 not exc 10cm in girth complete all as specified and directed.

S & F PVC (SWR) Pipes 110mm dia single socketed in any length with rubber ring joints , fixed to walls complete all as specified and direceted.

S & F 75mm dia PVC Floor trap incl grating fixed in floor with cement complete all as specified and directed.

Supply and fixed vitreous china wash hand basin white flat back size 550x400mm including 02 Nos angle iron bracket 40x40x5mm, PTMT waste coupling and 32mm dia waste pipe of suitable lengh with socket, complete all as specified and directed.

S & F vitreous china wash down water closet (pedestal pattern) pan white with “P” or “S” trap including connection to drain or outgoing pipe and to syphonage pipe complete all as specified and directed.

S & F 15 mm bore CP brass Central Hole Basin mixer fixed to GI pipe with pvc connection pipecomplete all as specified.

S & F cast copper alloy bib taps chromium plated 15mm bore pipe with crutch or butterfly handle complete all as specified and directed.

S & F angle valve cast copper alloy with capstain head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed.

S & F PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified

S & F hand shower (Health facut) with 1 M flexible tube with wall hook bracket etc, complete set of superior quality.

S & F CP Brass toilet paper holder with wall hook bracket etc, complete set of superior quality.

S & F 15mm bore PVC connection 450mm long with brass/PVC coupling and washer as directed.

S & F CP Brass Tabular Towel Rail, 12mm dia D type 60cm long between flanges complete set of superior quality.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600 mm long.

S & F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed.

S & F triple layer rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified and directed.

S & F Gun-metal, globe or gate valves 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F Vitreous China Urinal, Half stall type,white (including flush pipe and waste pipe & urinal spreder) and including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

M&L Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L Mild Steel TMT bars 8mm dia , as in stirrup cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm thickness in soft / loose soil complete all as specified and directed.

Removing excavated soils to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

Labour only for Earth filling under floor and Spreading and levelling in layers n exc. 25 cm thick and well ramming including watering as required ( item retrived from excavation shall be reused)

S&F false ceiling with 4mm thick 'E' Board of size 600x600mm, white, prelaminated sheet embossed reinforced designer ceiling board tiles of approved texture and powder coated, hot dipped GI imposed grid frame work complete all as specified and directed including all necessary drilling, cutting to fix electrical items as under with the following:- (a) 24x24x0.45mm thick powder coated GI angle plugged @ 600mm c/c along perimeter of wall. (b) 24x32x0.33mm thick powder coated GI tee as main and cross runners suspended with 4mm dia GI wire suspenders with adjustable clamps and dash free fastners with rawl plug and screws plugging in RCC slab etc. placed @ 600mm c/c from perimeter of wall. (c) Fixing of 4mm thick 'E' board tiles and finished complete with one coat of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be executed as per manufacturer's instructions and as directed.

M & L for cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 160 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

S & F PVC (SWR) Pipes 160mm dia single socketed in any length with rubber ring joints , laid in trenches complete all as specified and direceted

M & L for cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed

Add or deduct for each 25 mm girth or part thereof over or under 30cm for forming fair finish drain or channel in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified and directed.

M & L for providing pre-cast cement concrete landing, cover slabs, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 including making 40mm dia hole @ 150c/c (if required) complete all as specified and directed. Note: Reinforcement shall be measured and paid seprately.

M & L for 75mm thick cement concrete type D-2, 1:4:8(40mm graded aggregate) as in sub base complete all as specified and directed.

M & L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M & L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed

M & L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F 1.00 MM thick Mild steel, plain black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred as in garage gates and ventilators chhaja's.

S & F steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

M & L for 3mm thick plain sheet glass ordinary quality incl glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, soft/ loose soil complete all as specified and directed.

M & L for shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread,levelled, and blinded with earth and rammed including watering complete all as specified and directed.

M & L for 75mm thick PCC 1:5:10, type C-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and diected.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-30 Grade with grey cement and no pigment complete all as specified and directed.

M & L for sand cushining under interlocking paver blocks complete all as specified and directed.

M & L for providing, cement concrete type B-0,1:2:4 (12.5 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M & L for Plain Cement concrete Type B1 1:2:4 (20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

S&F Reinforced concrete pipes 300 mm dia, class NP3, laid and jointed complete with collars complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per above item No 91 but one socket outlet point 5 Amp on an independent board

All as per above item No 91 on the same board 5 Amp

All as item no 91 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

S & F switch piano flush button single pole one way 15 Amp 240 volt complete as directed.

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed.

S&F socket outlet flush type 5 pin 5 Amps 240 volts complete as directed.

S&F ceiling rose surface bakelite three terminal complete as directed.

Supply & fix fan regulator electronic step type for ceiling fan fixed, in existing board and connecting as directed,

S & F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S & F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 415Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

S&F MCB single pole 10 to 40 Amp 240 volts 10 KA breaking capacity complete all as specified and directed.

S&F MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

M&L for Sub main wiring with two single core PVC insulated cable with 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and directed. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

S & F FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as specified and directed.

S & F FTL with ultra bright crystal LED tubelight, 18 W ,6000 K with high efficency, with neccessary electrical connection complete all as specified and directed.

S&F LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed.

S & F super bright LED (2X2), 36 W, 6000 K recess mounting with high efficent LED source all as per specified and directed.

S & F of ceiling fan 1200 mm sweep, BEE star rated (40-50 Watt), Min air delivery 215 CFM, copper wound motor, AC single phase, 230/240 volt, white colour complete with blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper cod of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq mm 4 core complete all as specified and directed.

S & F or laying/passing through pipe 1100V grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular 10 sqmm aluminiuam conductor complete all as specified and as directed

Disposal of surplus soil n.exc 50M distance from the starting point and depositing where all as specified and directed.

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) all as specified and directed

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable all as specified and directed.

Supply, Installation, commissioning and testing of single phase Inverter Technology Split Type wall mounted Air Conditioner (indoor & outdoor unit with cordless remote control unit) of Capacity not less than 2.0 TR, minimum BEE 3 star rating , fitted with rotary compressor (minimum 5 year Warranty), copper condenser, Refrigerant type R-410A/R-32, rated cooling capacity not less than 6300 Watts/ 21500 BTU/ hr, PVC insulated and sheathed multi stranded copper conductor cable 4 core 2.5 Sqmm for connections with outdoor unit, clamps, nuts, bolts, washers, drilling holes on walls/ceiling for connection/drain pipes and making good the disturbed surfaces of wall/ ceiling with cement mortar, white cement and painting work to match the existing surfaces of walls complete all as specified and directed. (Make:- Latest Model of Hitachi/ Latest Model of Daikin/ Latest Model of Carrier/ Latest Model of Mitsubishi) Note :- PVC drain pipe of suitable size, PVC cable for connecting indoor & outdoor unit and Heavy Duty copper connection pipes including suitable insulation are deemed to be included in above quoted rate.

Supply, Installation, commissioning and testing of voltage stabilzer of capacity 5 KVA wall mounting type with digital meter, input voltage correction range 160 Volts to 260 Volts, high voltage cut off 270 V + 5 volts, low voltage cut off 160 Volts + 10 Volts, output voltage range 225 Volts + 11%, time delay normal 30 Sec as inbuilt in new AC or 120 Sec + 30 sec with PVC insulated and sheathed multi stranded copper conductor cable 3 core 2.5 Sqmm for connections complete all as specified and directed.

M/S Reliance Construction

M/S KAUSHIK CONSTRUCTION

M/S S S A ASSOCIATES