Repair and replacement of electrical installation in the Departments of Meat Science, Clinical Block, Student day centre and other related works under Heritage Building repair works at Madras Veterinary College, Chennai-07.

Amount

Electrical Works

Supply and erection commisioning of sound proof 125 KVA Diesel generator set with alternator with diesel tank with silencer with AMF pannel (Make: Kirloskar/ cummins are equivalent as directed by the Dept. Engineer)

Supply and laying ISI quality 31/2x185 sq.mm PVC LTUG armoured cable in a trench to be excavated at a depth of 0.75 m putting 0.15 mtr layer of snad and coveing the cable completely with bricks and sand and refilling earth to make good

Supply and laying 2 run of 31/2x185 sq.mm PVC LTUG armoured cable on post on wall /MS L angle with MS clamps for the connection from substation and connection from the generator to all Clinical Block. (Make: ISI cable only)

Supply and fixing of brass cable gland for 3½ x 185 Sq.mm PVC armoured LTUG cable and providing cable end termination with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Earthing as per the ISI specification with an earth electrode of 2.1 mt. class 'B' G.I.pipe of dia not less than 40mm with copper earth plate of size 125mmx 50mm x 6mm with necessary funeling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and laying of 25 x 3mm tinned copper flat for body earthing etc., as per directions of the Engineer-in-charge

Supply and erection of powder coated MS pillar box of size (2 X 2½ X 1') made up of with 14 SWG sheet steel with front hindged door with lock and key arrangement, housing 4 nos of 25 X 6mm copper flats with suitable porcelain / hylam base support completely with 'L' angle iron support of suitable height with concrete base with earth connection.

Removing and Refixing the following Main switches in the existing Meats MV panel with copper interconnections,and taken over the old main as buyback.(1.400Amp TPN SDC with HRc fuse-5 nos/2.250Amp TPN SDC with HRc fuse-3 nos and All accessaries)

Preparing Drawing for as per CEIG norms and availing drawing approval with connected loads from CEIG includung fees.

Supply and erecting LTUG cable indicator as directed by the Department Engineer with concreting etc., complete

Wiring with 2 x 1.5 sq.mm., (22/0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe open in wall and ceiling with PVC accessories with M.S. switch box and 6A F.T. modular switch in flush with wall with cover for making good of the with suitable colour for PVC open light point / fan point (For electronic regulator). (Cable Make: Finolex / Orbit / Kundan / Polycab) (5 points per coil)

Supply and fixing of single 18 W -4 feet LED fitting with tube on 2 Nos. of TW round block on wall with connection. (Make: Philips / Crompton / Wipro/ Equivalent)

Supply and fixing 48” AC ceiling fan complete with double ball bearing with stepped electronic 300 W regulator with 1 mtr down rod on the existing clamp. (Make: Crompton High speed )

Supply and fixing of 6A flush type switches 5 Nos. and 6A 3 pin and 2 pin-1 no with stepped regulator-2nos with on suitable surface box with connection complete in the 16 moduled box. box. (Make: Anchor or Equivalent)

Supply and fixing of 3 Nos (3 pin 2 pin) 6A combined flush type wall socket with control switches concealed in suitable MS box covered with hylem sheet in flush with wall with earth connection

Supply and fixing of 6A / 16A 3 pin modular combine flush type wall socket with 16A flush type switch on suitable MS box with connections complete. (Make : Anchor / Indo Asian)

Supply, installation, testing and commissioning of 20A Metal glad Socket controlled by 32A MCB concealed to wall/floor/ceiling/furniture including PVC conduit all accessories and associated civil works for AC points (Make: L&T/Hager/Siemens)

Supply and fixing of 450 mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall

Supply and fixing of vertical 4 way triple pole neutral MCB distribution board of IP42 in sheet steel enclosure with 100A 4 pole MCB isolator as incoming and 32A double pole 2 Nos., with 6A to 32A SP MCB of 8nos. as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCB DB and MCB's should be with the ISI mark. (Make : Havells /L&T/Siemens)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. (Make : Havells /L&T/Siemens)

Supply and run of 2 of 4 sqmm(56/0.3) PVC insulated SC unsheathed cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour

Supply and run of 2 X 2.5 sq.mm., (36/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid PVC open on wall and ceiling with the suitable colour with No.14 TC wire as Earth. (Cable Make : Finolex / Orbit / Kundan / Polycab)

Supply and laying ISI quality 31/2x70 sq.mm PVC LTUG armoured cable in a trench to be excavated at a depth of 0.75 m putting 0.15 mtr layer of snad and coveing the cable completely with bricks and sand and refilling earth to make good

Supply and providing cable end termination of 3 ½ x 70 sq.mm PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Earthing as per P.W.D standard with an eartjh electrode of 2 Mtr. Class 'B' GI pipe of fia not less than 32mm complete with necessary masonry work.

Supply and run of No.8 copper base conductor on wall/floor with suitable 'U' nail clamp for connect earth pit to DB, etc.

Supply and fixing of 120 Watts LED focus light fitting on the existing wall / post with connection complete at Meats building Road and meats counter areas.. (Make: Philips/ Havells/ Equivalent)

Providing cement bed for placing the generator with G.I sheet enclosure as per the design given by the Engineer-in-charge.

Supply of Diesel for DG test run

Supply and laying 1 run of 31/2x150 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 m putting 0.15 mtr layer of snad and coveing the cable completely with bricks and sand and refilling earth to make good for the connection from substation and connection from the generator to all Clinical Block. (Make: ISI cable only)

Supply and laying 31/2x150 sq.mm PVC LTUG armoured cable on post on wall with MS clamps for the connection from Sub Panel board to all Clinical Block. (Make: ISI cable only)

Supply and fixing of brass cable gland for 3½ x 150 Sq.mm PVC armoured LTUG cable and providing cable end termination with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and fixing of 60 watts LED street light fitting on suitable GI pipe with G.I.bend complete on post/ wall with suitable syntax box complete with connections complete and painting. (Make: Orbit / Equivalent)

Supply and erection, concealeding on wall of Lighting Distribution Board with connection complete:- LDB16Way 1ph DBs ( Incoming DP MCB, Outgoing SP MCB)Incomer : One No. 32A DP MCB - 'C' curve Outgoing : 14 Nos. 6/10/16/32A SP MCB - 'C' curve ( 14way outgoing each phase ) (Make: L&T/ Hager/Siemens)

Supply, installation, concealeding,testing & commissioning of 8Way VTPN , double door Power distribution boards (VTPNDB) conforming to the technical specifications for MCCB DB's & comprising of the following. Incomer:1No - 125A TPN MCCBOutgoings:8Nos - 63A TPN MCB (Make: L&T/ Hager/Siemens)

Replacing the damaged 6A F/T modular switches with GI box with sheet suitable electrical connection complete (Make: Anchor/legrend or equvalent)

Supply and erection commisioning of sound proof 82.5 KVA Diesel generator set with alternator with diesel tank with silencer with AMF pannel for conference hall ( Make: Kirloskar/ cummins/ Mahindra are equivalent as directed by the Dept. Engineer)

Supply and fixing of 100 W 1 module steped fan regulator in suitable Metal box with plate cover with connections complete

Supply and fixing of 2" "T" type angle iron frame with clamps for placing 150 /185sqmm LTUG cable with connections.

Supply and erection of Outdoor type floor mounted sub panel board made up of IP52 water and heat proof wih 400A TPN FSU 1no as incomming and 250A TPN FSU 3 nos, 200A TPN FSU - 1no with125A TPN FSU 2nos as outgoings with 4 nos. of 75 x 6 mm or equivalent thick copper busbar in busbar chamber with porecelain insulators with angle supports with connections complete placed at Semen bank and near Clinical block,

Supply and providing Safety equipments like earth rod,rubbermats, gloves and fire extninguisher to the required places.(1.11 KV ISI of 2m X 1m Rubber mat (5 Nos )2.4 nos of Fire buckets made out of 40X40X6mm MS angle 3.Danger board as Electrical Authorities)

Supply and laying ISI quality 31/2x95 sq.mm PVC LTUG armoured cable on wall with clamps/MS supports

Supply and fixing of brass cable gland for 3½ x 95 Sq.mm PVC armoured LTUG cable and providing cable end termination with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and erection of powder coated MS pillar box of size (2 X 2½ X 1') made up of with 14 SWG sheet steel with front hindged door with lock and key arrangement, housing 4 nos of 25 X 6mm copper flats with suitable porcelain / hylam base support completely with 'L' angle iron support of suitable height with concrete base with earth connection.

Supply and providing ISI quality cable of 3 ½ x 70 sq.mm PVC LTUG aluminium armoured cable on wall with electrical connection complete.

Supply and erection of MS Angle of size 1" X 1" for LTUG cable supports

Bidder Name

V BEST ENGINEERS