ROAD RESTORATION GA 10.47

Sply and Lay of WMM. Vil Rd — oviding & Laying of Wet Mix Macadam Base Course: Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macad specification including screening of aggregates and granular materials, premixing the material with water at OMC in Wet Mix Plant, rriage of mixed material by tipper to site, laying in uniform layers on well prepared surface and compacting with Vibratory Roller t achieve the desired density, including supply of all materials, machinery, fuel and lubricants, including incidental costs, includin cost of quality control complete as per Clause 406 of Specifications for Road &Bridge Works of MoRT&H (5th Revision).Note: This it is for the restoration of village road of CGS SV 14 in Jalpaiguri District and is independent of any other item in the SOQ."

Sply and Lay DBM. Vil Rd Jlpgri — roviding and Laying Dense Bituminous Macadam: Providing and laying dense bituminous macadam (of required thickness as advised) with t Mix Plant using coarse aggregate, fine aggregate, filler and bituminous binder asper design Job Mix Formula conforming Marshall Me od as per specification, including screening, cleaning of chips and preparing a uniform and quality mix in Hot Mix Plant and ensurin a homogeneous mix, in which all particles of the mineral aggregates are coated uniformly, transporting the hot mix to work site, la ng the mixed materials at specified laying temperature with a hydrostatic paver finisher with sensor control to the required grade, vel and alignment over prepared surface rolling with smooth wheeled, vibratory and tandem rollers for break down, inter-mediate and nished rolling to achieve the desired density of at least 98% of that of Laboratory density, Marshall specimen, hand packing and pin ng to give an even surface including cost and carriage of all materials, hire charges of machinery and equipment for construction an quality control, fuels and lubricants and wages of operational staff complete as per Clause 505 of Specifications for Road &Bridge W ks of MoRT&H (5th Revision). For Grading I & II.Note: This item is for the restoration of village road of CGS SV 14 in Jalpaiguri D trict and is independent of any other item in the SOQ."

Sply and Lay BC. Vil Rd Jlpgri — roviding and laying bituminous concrete of required thickness with Hot Mix Plant using coarse aggregates, fine aggregates, filler ma rials and bituminous binder of required specification including screening, cleaning of chips and preparing a uniform and quality mix n Hot Mix Plant and ensuring a homogeneous mix, in which all particles of the mineral aggregates are coated uniformly, transporting e hot mix to work site, laying the mixed materials at specified laying temperature with a hydrostatic paver finisher with sensor con ol to the required grade, level and alignment over prepared surface, rolling with smooth wheeled, vibratory and tandem rollers for b ak down, inter-mediate and finished rolling to achieve the desired density of at least 98% of that of Laboratory Density,including c t and carriage of all materials and hire charges of machinery and equipment for construction and quality control, fuels and lubrican and wages of operational staff complete as per Clause 507 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).Note: his item is for the restoration of village road of CGS SV 14 in Jalpaiguri and is independent of any other item in the SOQ."

Sply and Lay GSB — onstruction of Granular Sub Base with Graded Material: Construction of granular sub-base by providing graded material ( Grading -III IV, V) , mixing in Wet Mix Plant at OMC, carriage of mixed material to work site, spreading in uniform layers on prepared surface in roper grade, compacting with vibratory power roller to achieve the desired density, including cost of all materials, machinery, tool plants and cost of quality control and all incidental charges complete as per Clause 401 of Specifications for Road & Bridge Works MoRT&H (5thRevision)"""". The job also involves removal of any unserviceable soil including excavation, loading and disposal upto 1 0 metres lead.Note: This item can be executed anywhere in the districts of Darjeeling, Jalpaiguri, Siliguri and Kalimpong as and wh required. Vendor needs to deploy men, materials and machineries as and when advised by Project Incharge within the districts and ex ute as much quantity within the limits of this item, as instructed. The execution of this item is independent of any other item in t SOQ"

Sply & Lay WMM — roviding & Laying of Wet Mix Macadam Base Course: Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Maca m specification including screening of aggregates and granular materials, premixing the material with water at OMC in Wet Mix Plant, arriage of mixed material by tipper to site, laying in uniform layers on well prepared surface and compacting with Vibratory Roller achieve the desired density, including supply of all materials, machinery, fuel and lubricants, including incidental costs, includi cost of quality control complete as per Clause 406 of Specifications for Road &Bridge Works of MoRT&H (5th Revision). Note: This i m can be executed anywhere in the districts of Darjeeling, Jalpaiguri, Siliguri and Kalimpong as and when required. Vendor needs to ploy men, materials and machineries as and when advised by Project Incharge within the districts and execute as much quantity within he limits of this item, as instructed. The execution of this item is independent of any other item in the SOQ"

Sply & Lay DBM — roviding and Laying Dense Bituminous Macadam: Providing and laying dense bituminous macadam (of required thickness as advised) with t Mix Plant using coarse aggregate, fine aggregate, filler and bituminous binder asper design Job Mix Formula conforming Marshall Me od as per specification, including screening, cleaning of chips and preparing a uniform and quality mix in Hot Mix Plant and ensurin a homogeneous mix, in which all particles of the mineral aggregates are coated uniformly, transporting the hot mix to work site, la ng the mixed materials at specified laying temperature with a hydrostatic paver finisher with sensor control to the required grade, vel and alignment over prepared surface rolling with smooth wheeled, vibratory and tandem rollers for break down, inter-mediate and nished rolling to achieve the desired density of at least 98% of that of Laboratory density, Marshall specimen, hand packing and pin ng to give an even surface including cost and carriage of all materials, hire charges of machinery and equipment for construction an quality control, fuels and lubricants and wages of operational staff complete as per Clause 505 of Specifications for Road &Bridge W ks of MoRT&H (5th Revision). For Grading I & II.Note: This item can be executed anywhere in the districts of Darjeeling, Jalpaiguri Siliguri and Kalimpong as and when required. Vendor needs to deploy men, materials and machineries as and when advised by Project In arge within the districts and execute as much quantity within the limits of this item, as instructed. The execution of this item is dependent of any other item in the SOQ"

Sply & Lay BC — roviding and laying bituminous concrete of required thickness with Hot Mix Plant using coarse aggregates, fine aggregates, filler ma rials and bituminous binder of required specification including screening, cleaning of chips and preparing a uniform and quality mix n Hot Mix Plant and ensuring a homogeneous mix, in which all particles of the mineral aggregates are coated uniformly, transporting e hot mix to work site, laying the mixed materials at specified laying temperature with a hydrostatic paver finisher with sensor con ol to the required grade, level and alignment over prepared surface, rolling with smooth wheeled, vibratory and tandem rollers for b ak down, inter-mediate and finished rolling to achieve the desired density of at least 98% of that of Laboratory Density,including c t and carriage of all materials and hire charges of machinery and equipment for construction and quality control, fuels and lubrican and wages of operational staff complete as per Clause 507 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).Note: his item can be executed anywhere in the districts of Darjeeling, Jalpaiguri, Siliguri and Kalimpong as and when required. Vendor ne s to deploy men, materials and machineries as and when advised by Project Incharge within the districts and execute as much quantity ithin the limits of this item, as instructed. The execution of this item is independent of any other item in the SOQ"

Sply & Lay Prime Coat — rime Coat: Providing and applying prime coat with Cationic Bitumen Emulsion of approved grade conforming to IS:8887-1978 at the rate f 0.85 kg/sqm and requisite quantity on prepared surface including cleaning of road surface and spraying primer using Mechanical mea including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications or Road & Bridge Works of MoRT&H (5th Revision).Note: This item can be executed anywhere in the districts of Darjeeling, Jalpaiguri Siliguri and Kalimpong as and when required. Vendor needs to deploy men, materials and machineries as and when advised by Project In arge within the districts and execute as much quantity within the limits of this item, as instructed. The execution of this item is dependent of any other item in the SOQ"

Sply & Lay Tack coat — ack Coat: Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 at a rate of .25 kg/sqm on the prepared surface cleaned, moistening the surface including cost and carriage of emulsion, hire charges of machiner and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revi on).Note: This item can be executed anywhere in the districts of Darjeeling, Jalpaiguri, Siliguri and Kalimpong as and when require Vendor needs to deploy men, materials and machineries as and when advised by Project Incharge within the districts and execute as m h quantity within the limits of this item, as instructed. The execution of this item is independent of any other item in the SOQ"

Sply & Lay Seal coat — roviding and laying Premixed Seal Coat with approved quality sand/grit @ 0.6 m3/ 100m2 and bitumen binder @ 0.8 kg/sqm on thoroughly leaned black top surface, including heating and mixing cleaned sand/grit uniformly with bitumen binder, laying and spreading, rollin with power roller including all incidental costs complete as per Clause 511 of specifications for Road & Bridge Works of MoRT&H (5th vision)Note: This item can be executed anywhere in the districts of Darjeeling, Jalpaiguri, Siliguri and Kalimpong as and when requ ed. Vendor needs to deploy men, materials and machineries as and when advised by Project Incharge within the districts and execute a much quantity within the limits of this item, as instructed. The execution of this item is independent of any other item in the SOQ"