Redevelopment of Patel and Indoor Stadium and Construction of New Indoor Sports Complex at Ajmer

Amount

PART-A"Civil Work"

Providing & compacted sub grade with 90% of maximum dry density (as per IS 2720 part VIII) SOIL (non plastic fraction finer then 75mm less than 10%) to slope and levels as PER FIFA

Providing and laying of 150 mm thick crushed aggregate base layer with min porosity 150 mm /hour as per FIFA QUALITY requirement and compacted to min 98% DD . - TOTAL COMPACTED BASE CAN BE 200 MM AFTER COMPACTION IN VARIOUS LAYERS.

Providing and laying of 4 inch dia PVC perforated pipe for sub soil drainage and all the pipes to be put in a 6" pipe to be taken to the main drain or sump or rain water harvesting sump. EVERY 5 METER

Decorative Painting & Graffitti as per architectural Drawings. Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). :

Filling of agg size 20 mm in the SUB SOIL DRAINS WITH 0.5% SLOPE AND DITCH as a filter media for the seeping water in French drains for Football field as per direction of Engineer-in-charge.

SUMP Creation - Providing & Laying in position cement concrete M-10 of specified grade including the cost of concrete M-10 of Specified grade including the cost of centering and shuttering. All work unto plinth level.

Providing and laying 1st class brick work laid in 1:3 cement sand mortar in foundation and plinth as per clause 1000/1300 of MORT & H specification for road and bridge works (Vth Revision) of 20013/ latest edition.

Outer Drains to be created on both the length side with Covers with a depth of 2 ft and width of 2 ft with a 1% slope towards the SUMP and also extra Rain Water Harvesting Sumps. The drain to be made with M10 of specififed grade with centering and shuttering as per requirement. Drain Cover to be provided of MS

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Asphalt Base as per Standard - 10 " in total

Providing and laying Synthetic Athletic Track surface (Sandwich, Cast in situ) incl. marking on the surface and including required as per IAAF standard competition equipments (as per list of equipment giver in Appendix ‐I ) all completed as per requirements/specification laid down by IAAF and as per direction of the Engineer‐in‐Charge. The compay should be IAAF and should have done one track for public or private. The manufacturing company should ahve done Class 1 certified tracks and send thier own team for instlaltion so warranties are shared and responsibilties are not passed. Written letter from OEM manufactuer that the bidder is authorized to bid on their behalf for this particular project is a must. Minimum thickness 13 mm. Force Reduction- 39 Tensile Strength-0.84 Elongation at break-80 Modified Vert. Deform.-1.9 mm @ 23°C [75°F] Friction-0.64/48 Permeability -Impermeable Material-EPDM, SBR, Reclaimed Rubber, ETC. Features-Environmental-friendly, UV-resistance, 5--10 years service time

Swimingpool area : Glass mosaic tiles of thickness 10 mm, size 300mm X 300mm, glossy finished laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the the cost of cement mortar bed 1:4) of ceramic material as per architectural design and drawing.

MAIN DRAINS GRILL

UNDERWATER ILLUMINATION FOR MAIN POOL In ABS Material SS 316 SS Leader in 43 mm / 14 G Pipe with Flat Step Trades Make: Astral / Feathertuff/Eq 5 Step Ladder

VACCUM HEAD SS 304 Metalic vacuum head , 900 mm long , PP wheel mounted,spring mounted brush at bottom of head, toeabe with nylon rope , 2" connection for hose Make: Astral / Feathertuff/Eq

Vacuum Pump with Trolley

Float Line anchors made in S.S.-316 Make : Astral Spain code 00140 / Eq.

Level anchor fixing in S.S.-316 Make : Astral Spain 00141 / Eq

Level anchor fixing in S.S.-316

Providing and placing in position 6.7 MM thick pre-fabricated sports surface, total thickness 6.7 mm EN-428 with 1.3mm top layer, weight psqmtr EN-430-3.8kg, closed sell double foam, Tech surface protection, EN14904 (Category P1), EN ISO717-2 impact sound insulation-22DB, Thermal resistance m2k/w 0.08, reaction to fire-meets European norms EN 13501-cf1-s2 formaldehyde emission-no formaldehyde, pentachlorphenol-no pentachlorphenol, Friction EN 13036-4-80-110, shock absorption EN-14808-33%, vertical dorfmation EN-14809-MM-0.8, Ball rebound EN-12235- 99%, specular gloss EN-2813- <30, Dimensional stability EN-434-+-0.2%, indentation resistance EN1516-0.19MM, resistance to rolling load EN-1569 (N)-1500, colour fastness ISO 105 B02-6, chemical resistance EN-423-no change, abration resistance EN ISO5470-1-mg/1000cycles-<250-T group Antimicrobial treatment-treated, Environmental attributes-solvent and heavy metal free-no periodic renewal needed. Roll form-2*15mtr. Certified by FIBA, BWF (Elite Class) & IHF.Product cames warranty for 10 years against the manufacturing defects. The work shall be carried out as per specifications, drawings and as per direction of the engineer-in-charge.

Providing and placing in position 4.00 mm thick pre-fabricated sports surface with 0.5mm top layer with CLP system, Closed sell PVC foam, weight 2.3Kg psqmtr., 2*20mtr Roll length, EN 651 vinyl floor covering for indoor sports purposes meets the requirement of EN 14904 on a sub-construction, impact sound insulation 17, Thermal resistance-0.03, Reation to fire-meets European norm-13501-1, C11-s1 Formaldehyde emission-no formaldehyde, pentachlorphenol-no pentachlorphenol ball rebound->90, Specular gloss- Dimensional stability-+-0.2, indentation resistance-0.35, colour fastness-6, Chemical resistance-no change, Abrasion resistance-T group, Antimicrobial treatmentTreated, Environmental attribute-solvent and heavy metal free-no periodic renewal needed. Product cames warranty for 5 years against the manufacturing defects. The work shall be carried out as per specifications, drawings and as per direction of the engineer-in-charge

SITC of Acoustic-Board – Soundproofing with all arrangements and related material & accesories and installation as per Enginner-In- Charge Temperature Range from 14° F to 180° F All “P” reinforced opaque vinyl meet MVSS-302 and FAR 25.853 Flammability Standards All “N” non-reinforced opaque vinyl meet MVSS-302, UL-94 V-0 and CSA 0-6V-O Flammability Standards W6V clear vinyl meets DIN 53382 Flammability Standard

Provding & fixing, Satin finish Stainless Steel Door Pull handle set of size 32 mm dia X 1200 mm, back to back fixing, Satin Stainless Steel Patch Lock with cylinder, Top & Bottom Satin Stainless Steel patch fitting, in frameless glass door with necessary screws all complete as per detailed Architectural Drawings and as directed by Engineer-in-charge : (Glass door qty will be payable in separate Item)

Poviding and fixing "chicken wire mesh" of 24 gauge at junctions of RCC & Brick work surfaces with cement mortar including necessary nails etc for fixing all height & level etc all Complete as per drawings and to the entire satisfaction of the Engineer in Charge.

Providing and supplying aluminium extruded tubular and other aluminium sections for curtain glazing as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).

Providing and fixing curtain glass panels, units of size and shape as required and specified, comprising of toughened glass panes 6mm thick, of approved colour and shade of approved colour and shade, including Structure sealant and weathering sealant, becker rod etc. all complete for the required performances, as per the Architectural drawings/ technical specification, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge

Extra for openable side / top hung vision glass panels including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 - point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in- Charge.

Providing fabricating and fixing of signages of varying sizes and shapes using three mm thick PVC sheet at base with self addhesive coloured vinyl with graphicson top of glow tape complete including fixing on wall with screws and washers or hanging on ceiling with GI chain/GI Bar complete as per technical specifications and directions of Engineer.

Double storage (one at upper portion and one at bottom portion) Center table : Top material flat glass, frame material : Stainless steel SS 304 , Dimension of top : 1219mmX711mm ,Height of center table : 460 millimeter : Thickness pof top material : 10 MM,Thickness of frame material : 18 MM.

Sitting Sofa (2Seater) of Primary/ Secondary frame structure material : Solid Sal Wood with S-Shape Spring & Elastic Knit; Fabric : 100% polyester; Material of Legs : Teak Wood with Machine Polish; Foam : Premium New 32 D foam + Micro Fibre Sheet for Comfort

Sitting Sofa (3 Sitter) primary/ Secondary frame structure material : Solid Sal Wood with SShape Spring & Elastic Knit; Fabric : 100% polyester; Material of Legs : Teak Wood with Machine Polish; Foam : Premium New 32 D foam + Micro Fibre Sheet for Comfort.

STEEL BENCH STAINLESS STEEL 3 SEATER Arm and leg made of 1.1 mm thick stainless steel of 201 grade. Complete with all respect. Overall length : 1800 MM, Overall Depth in mm ( ±5 mm) : 640 MM, Overall Height in mm (±5 mm) : 800 MM , Seat Height from Floor in mm (±5 mm) ; 425 MM , Thickness of material of Seat and Backrest (mm) ; 1.2 MM with SS304 grade, brush finish. (IN Viewing Area for Sports and Reception Waiting)

Supply and fixing of curtains for the door/window material 100% cotton. Complete with suppy in fixing. Colours and shade approved by approving authority.

Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest conforming •Double bed with •Bed Mattresses and •4 Nos of pillow conforming to IS:13489/2000 Latest, Type 2. Inner Cushioning Material Rubberized Coir Sheets Medium Grade conforming to specification No.IS:8391-87 Latest. The Inner Cushioning Material to be pasted with Inner Protective Blanket. The outer cover shall be of Floral Jacquard Tapestry cloth in dark Green or Blue or Pink shade, •Bed Sheet Variety No-2; 100 % cotton; 170 gms per sq.m, • Modern type side table with 2 drawers Three layer prelaminated particles board(Wood Product) of grade II Type II of IS 12823/Latest.

Providing Table (2.5m L x 0.9m W x 0.850m H) With Wooden Supports and frame work , Stainless Steel Legs and Glass top and all related accessories 6 seater Table

Stainless steel chairs (450mm high) with Framework in Stainless Steel & Cusioned Seats and Back rest

Providing, fixing and installation of 12 mm toughened glass partition including door,doorma/closema, brackets,frames,scaffolding, including cutting of floor tiles, all accessories are required for complete installation and commissioning for proper functioning , door closer etc. complete in all respect.

Providing Table (1.2m L x 0.6m W x 0.850m H) With Wooden Supports and frame work , Stainless Steel Legs and Glass top and all related accessories Work Station Tables

Reception Table (3.0m x 0.6m x 1.35m) Fabricated in Wooden Supports and plywood with modesty Panels for Electical Boxes

Carpet for rooms of size 6'x4' conforming to IS : 14566: 1998: Latest, minimum thickness of 1 Inch. Warp yarn & weft yarn of Cotton with single type of knot.

Providing, fixing and Installation of litter bins made from HDPE. Capacity 100 ltr, with removable lid, load carrying capacity 50kg, Rectangular in shape height 937, length 500, width 500, with stand, including all necessary fittings. Stand made from Hollow pipe of 40x40x2.6 mm, hight of frame should be 1.10 mtr as per approved drawing complete as per directed by engineer incharge.

RO WATER MACHINE Purification Capacity Upto 15 LPH* Body Material ABS Food Grade Plastic Mounting Wall-mounted Dimensions(mm) 380 (L) x 270 (W) x 505 (H) Inlet Water Pressure/Temp (Min) 0.3 kg / cm2 or 4.267 psi/10°C or 50°F Inlet Water Pressure/Temp (Max) 3 kg / cm2 or 42.67 psi/40°C or 104°F Filter Cartridges Sediment, Activated Carbon Input Power Supply Single Phase 100 – 250 V AC, 50-60 Hz Auto-Flushing System - Weight 7.4kg Storage Capacity 8 L Purification Production Rate 15 L/hr or 0.25 L/min Maximum Duty Cycle 75 L/day Power Consumption 60 W Membrane Type Thin Film Composite RO Booster Pump Voltage 24 V DC

Operational cost for 1st Year

Operational cost for 2ndYear

Operational cost for 3rd Year

PART-B" Electrical Work"

(Sports Lighting at a Football Ground to Achieve 750 lux) 4 Nos. 40M Sports Tower , Hot dip galvanized suitable to mount suitable fixtures to meet PLG 07.All Steel will be hot dip galvanized Material Of Steel is S 355 or higher Galvanizing according to BSEN 1461 To achieve required 750 lux using 104 nos. 500W LED sports lighting fixtures on 4 towers, Foundation Accessories, Cross Arms and Ladder, Fastners and Service Basket, Pole Control Panel, Trailing Cables, Central Control Panel, Casting of foundation, Cranage, Ground Cable Supply and Laying, Boarding and Lodging of the engineer, Earthing, and any other miscellaneous items complete in each and every spects with Warranty: For sports towers: 25 years. Lights: 5 years from the date of installation.

(Volleyball court) To achieve required lux as national level on the ground 12M Sports Tower , Hot dip galvanized suitable to mount suitable fixtures to meet BIS 875. To achieve required lux using 4 nos. 500W LED sports lighting fixtures on 2 towers including the trailing cable inside the pole, Foundation Accessories., Cross Arms and Ladder, Fastners and Service Basket, Disconnect Enclosure - Control Circuits for Each Tower and central control Panel, Supply of Lighting Design as per guidelines and trailing cables, and any other miscellaneous items complete in each and every spects with Warranty: For sports towers: 25 years. Lights: 5 years from the date of installation.

18x3 W LED lighting fixtures for Swimming Pool with driver

(Basketball court)To achieve required lux as national level on the ground 4 Nos. 12M Sports Tower , Hot dip galvanized suitable to mount suitable fixtures to meet BIS 875. 500W LED sports lighting fixtures on 4 towers including the trailing cable inside the pole, Foundation Accessories, Cross Arms and Ladder, Fastners and Service Basket, To achieve required lux using 16 nos. 500W LED sports lighting fixtures, Disconnect Enclosure - Control Circuits for Each Tower and central control Panel, Supply of Lighting Design as per guidelines and trailing cables and any other miscellaneous items complete in each and every spects with Warranty: For sports towers: 25 years. Lights: 5 years from the date of installation.

(Lawn Tennis court) To achieve required lux as national level on the ground 4 Nos. 15M Sports Tower , Hot dip galvanized suitable to mount suitable fixturesnto meet BIS 875. 500W LED sports lighting fixtures on 4 towers including the trailing cable inside the pole, Foundation Accessories, Cross Arms and Ladder, Fastners and Service Basket, To achieve required lux using 24 nos. 500W LED sports lighting fixtures, Disconnect Enclosure - Control Circuits for Each Tower and central control Panel, Supply of Lighting Design as per guidelines and trailing cables and any other miscellaneous items complete in each and every spects with Warranty: For sports towers: 25 years. Lights: 5 years from the date of installation.

SITC of 32'' Flat Screen HD LED TV with remote control and wall mount unit / floor standcomplete with making connections etc. as required Sony/ Samsung/Panasonic)

Lift S.S Cabin and false Ceiling with multi reflecting in direct lighting arrangement centrally placed motor type Blower with circular air diverter, integral car operating panel luminous button & PVC Flooring, S.S AUTOMATICE CENTER OPENING DOOR, 800 wide x 2000 mm height., 04 Stops & 04 Opening, MICROPROCESSOR BASE CONTROL SYSTEMS+V3F, 415 Volts, 3 Phase, 50 Cycles 5%, a) Call Register type Micro push button, b) Blower switch in Car (automatic). c) Fireman Switch at Main Landing. d) Emergency Alarm.(e) V3F Fuzi (f) Motor Sharp 7.5 HP (g) Rope 10 mm. make Usha Martin 3 Nos. (h) Speech System. (i) A.R.D.System - 884 kg (13 pass)

To achieve required lux using 8 nos. 200W LED sports lighting fixtures for T.T court as per drawing or engineer incharge choice with Warranty: Lights: 5 years from the date of installation.

To achieve required lux using 8 nos. 200W LED sports lighting fixtures for Badminton court as per drawing or engineer incharge choice with Warranty: Lights: 5 years from the date of installation.

Design, supply, installation, commissioning of Roof top ongrid solar system, Solar Panel, On-Grid Inverter, Mounting Structure, Wires & Cable, DCDB & ACDB, LA & Earthing, Solar & Net Meter & Auxiliaries, LT and HT auto Synchronization panel, DUCTS & Wire Trays, Camera for Monitoring, Fire Extinguisher, Pipeline & Motor for Water Arrangments from Existing Source to Roof and any Other Misc, with Manufecturing Defect Warranty 12 yrs, Perfomance Warranty for 25 Yrs.

AS1200T High performance Top mounted sand media filter with UV and corrosion resistant, Hydraulically balanced umbrella - fold laterals for balanced flow, backwashing and easy maintenance, Multi- port 6-way valve (bolts mounted) with lever-action handle, quick connect unions, Integral sight glass, manometer, air-bleed apparatus7 AS1200T 1200mm dia filter with 2" MPV 56.50m3/hr1.13m2/1200kg

Filter Sand Media

Centrifugal self priming pump with high hydraulic efficiency, chemical resistant and ultra quiet operation. Integrated along with IP-55 protection- class F continuous rating. Pump shall be of one piece body made in fibreglass and reinforced polypropylene, integrated prefilter with strainer basket, fast opening translucent transparent polypropylene lid, easy opening lid system, 316 SS Shaft and mechanical seal. Plastic impeller, 75/63mm suction & 75/ 63mm return union connections.QRR300S 3HP, 1 Phase Pump 63mm/63mm 2.20KW

EYE Bull Nozzel for swimming pool

ASMD300 Square Main Drain- Frame & Grille in ABS 300 x 300mm 33 cu mtr/hr

Swimming pool Overflow Grating. 12" Single Pin. (White Color) Make DGM

Overflow Ladder - 3Steps With Anti slip SS Threads SS 304, 38 MM

Supplying of class on - off dosing pump 05L/hr 7 bar whose flow can be manually regulated using a potentiometer that determines the frequency of injections , Regulation range of 0-100% and 0-20%. Low maintenance.for wall or floor assembly , easy to safe work , made of the most resistant materials.don't require oil.flow 05 L/hr 7 bar pressure.

Dosing Tank

Control Pannel

Suction Motor Pump 3H.P, S.S Trolly Mounted Wheel & Handle, Starter Kit, 2 Core Wire Lead 20 M, With required Nossles & Fittings

AS816/1CS 8-16' Telescopic pole with handgrip & clip-in fastening- Corrugated- Silver colour Make Aqva Star

Algae Brussh 10"

Alage Brush 5"

ASDNH Heavy duty 15" deep net with 5 Micron net, clip in fastening- Dark Blue handle with white bag Aqva Star

ASWBE 18" Wall brush with Poly bristle, clip in fastening- Dark Blue Aqva Star

Aluminium Suction Head 18"

Heavy Duty Flat Net With micron mesh-Dark Blue

Spiral reinforced corrugated highly flexible hose pipe with hose swivel at one end Transparent Blue ASHS30 30 mtr hose pipe Aqva Star

AS-TK 3 way test kit (PH/CL/BR)

PVC Pipe and Fitting 80mm 63mm 50mm SUPREME /AUSTRIL/ ASHIRWAD

Installation Charges / PlumbingCharges

Chemical and Maintenance Charges Three year

PART-C" IT & Survailance"

Supply, Installation, Integration, Testing, & Commissioning of 4 MP Fixed Lens Network IR Bullet Camera with SD Card as per requirement, scope of work, technical specification & complete in all respect as per the satisfaction of Engineer in Charge with 3 years onsite OEM support.

Supply, Installation, Integration, Testing, & Commissioning of 4 MP Vari-focal Motorized Bullet camera with SD card as per requirement, scope of work, technical specification & complete in all respect as per the satisfaction of Engineer in Charge with 3 years onsite OEM support.

Supply, Installation, Integration, Testing, & Commissioning of 4 MP Fixed Lens Network IR Dome Camera with SD Card as per requirement, scope of work, technical specification & complete in all respect as per the satisfaction of Engineer in Charge with 3 years onsite OEM support.

Supply, Installation, Integration, Testing, & Commissioning of 32 Channel H.265 Network Video Recorder upto 8 SATA III as per requirement, scope of work, technical specification & complete in all respect as per the satisfaction of Engineer in Charge with 3 years onsite OEM support.

Supply, Installation, Integration, Testing, & Commissioning of 24 Port Gigabit PoE Switch as per requirement, scope of work, technical specification & complete in all respect as per the satisfaction of Engineer in Charge with 3 years onsite OEM support.

Supply, Installation, Integration, Testing, & Commissioning of 8 Port Gigabit PoE Network Switch as per requirement, scope of work, technical specification & complete in all respect as per the satisfaction of Engineer in Charge with 3 years onsite OEM support.

Supply, Installation, Integration, Testing, & Commissioning of 6 TB HDD for Video Recorder as per requirement, scope of work, technical specification & complete in all respect as per the satisfaction of Engineer in Charge with 3 years onsite OEM support.

Supply, Installation, Integration, Testing, & Commissioning of 43"Led Monitor as per requirement, scope of work, technical specification & complete in all respect as per the satisfaction of Engineer in Charge with 3 years onsite OEM support.

Supply, Installation, Integration, Testing, & Commissioning of Fiber media converter (pair) to connect UTP to fiber optic cable as per requirement, scope of work, technical specification & complete in all respect as per the satisfaction of Engineer in Charge with 3 years onsite OEM support.

Supply ,Installation and Testing of 19 " Rack mounted/ surface mounted aluminium / CRS powder coated multimode glass Fiber Optic Cable Patch panel/ LIU (upgradable to intelligent panels with use of sensor strips) along with cable tray/ fiber management system , adapters for ST II/ SC/FC/MT/PC connections including making connections (Terminations if required will be paid seperately) to active / passive equipments with ferruling at both ends for identification with necessary tools for Terminations and testing required . 24 Ports along with necessary

Ruidp item No. 61.2 : Supply , Drawing and Testing of 4 pair, 100 ohm, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessorry tools for punching, stripping, crimpping and testing required .

Supply , Drawing and Testing of Outdoor, steel tape armoured multimode[62.5/125um ] glass Fiber Optic Cable as per latest ammendments of TIA /EIA 568B.3 , GR 20 CORE/ UEC 794-1/ EN 187000 Standards in existing MS/PVC Conduits/ hume pipe including making terminations to active passive equipments with ferruling at both ends for identification with necessorry tools for Terminations and testing required . 6 Fiber

Resident Technical Expert during Maintenance period for 3 years after the works are certified to be completed

Bidder Name

Amount

M/s Ramesh Kumar Bansal

NGGADHIYA

R AND B INFRA PROJECT PRIVATE LIMITED

NGGADHIYA

R AND B INFRA PROJECT PRIVATE LIMITED

M/s Ramesh Kumar Bansal

NGGADHIYA