Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹37.6 L+₹2.2 L (6.25%)Rejected-AOC 25 13 1 AMBEGAON PATHAR PUNE 411046 | PUNE | MAHARASHTRA | 411046 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹41.2 L+₹5.8 L (16.5%)Rejected-AOC SECUNDERABAD | WARANGAL | TELANGANA | 506350 | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹42.3 L+₹6.9 L (19.4%)Rejected-AOC H NO 2 19 1 VELGANOOR VILLAGE DANDEPALLI MANDAL MANCHERIAL DISTRICT TELANGANA 504 215 | PRAKASAM | ANDHRA PRADESH | 504215 | L4 | Rejected-AOC Being not L1 | |
| 5 | L5₹44.7 L+₹9.3 L (26.3%)Rejected-AOC | L5 | Rejected-AOC Being not L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
7 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
PERIODICAL SERVICES AND REPAIR TO CERTAIN MISCELLANEOUS REPAIRS TO B R ITEMS AND CONNECTED WORKS AT ZONE C AREA UNDER AGE B R N NO I OF GE NORTH SECUNDERABAD
2023_MES_607292_1
8712
Open Tender
Civil Works
Item Rate
300 days
GARRISON ENGINEER NORTH SECUNDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER (NORTH) SECUNDERABAD
₹90,000
Yes
19 Dec 2023
30 Jun 2023
12 Sept 2023
30 Jun 2023
7 Sept 2023
21 Aug 2023
Amount
M&L for Complete removal of existing treatment of external surfaces of wall including removing fungus /algae dirt, oil, grease and loose particles by wire brush, cleaning, washing and removing dust. Cracks less than 2 mm, should be cleaned free of dust with a vacuum cleaner, etc and applying 3.00 mm thick white cement based wall care putty for a smooth finish complete all as specified and as directed. Note:-Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works etc. Make:-Birla White / Asian Paint / Diamond wall putty /JK Putty
M&L for applying 2 coats of weather proof paint over a coat of exterior wall primer including preparation of surfaces and allow it to dry before taking up the two coats,etc complete all as specified and directed. Make: Apex Ultima from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux. (I) Unit time quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works. (II) The rate of application of primer and two coats shall be as per manufacturers instructions. (III) A time gap of eight hours shall be maintained between the application of primer and each coat . (IV) Application of primer and paint shall be done by an authorised applicator of the paint. (V) Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out painting shall be made by the contractor. (VI) The contractor shall deposit full quantity of weather proof paint to the user unit calculated based on coverage as per manufacturer's instructions before starting of paint work. The paint shall be issued to the contractor by user unit as per weekly requirement.
M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying one coat of white wash all as specified and as directed.
M & L for preparing the old plastered or unplastered decorated surfaces of ceilings and applying one coat of white wash all as specified and as directed.
M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying Two coat of white wash all as specified and as directed.
M & L for preparing the plastered or un plastered old decorated surfaces of walls and applying one coat of colour wash all as specified and as directed.
M & L for preparing the plastered or un plastered old decorated surfaces of walls and applying Two coat of colour wash all as specified and as directed.
M&L for preparation of old painted surfaces including brooming down or steel wire brushing scraping down smoke soot, moulds, moss: efforescent salts and trading oil, greasy spots and applying one coat of oil bound distemper and including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish of any height .etc complete all as specified and directed.
M&L for complete removal of existing treatment of old painted wall for internal surfaces and applying 3.00 mm thick in Two layers of white cement based wall care putty smooth finish.etc of approved make & shade on walls and other places of up toany height complete all as specified and as directed.
M&L for applying one coats of priming with alkali resistant priming paint over the putty surface and pproved make & shade on walls of up to any height etc, complete all as specified and as directed.
M&L for applying two coats of oil bound distemper over the primer surface of approved make & shade on walls of up to any height etc, complete all as specified and as directed.
M & L for preparing old decorative surfaces of walls, by washing, rubbing down, stopping and applying one coat of cement base paint of any colour all as apecified and as directed
M & L for preparing old decorative surfaces of walls, by washing, rubbing down, stopping and applying Two coat of cement base paint of any colour all as apecified and as directed
M&L for preparing old painted surfaces of walls and applying one coat of weather proof paint on external surfaces of walls and celing, including necessary scaffolding and saftey precations to the work complete all as specified and as directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux
M & L for preparation of old painted wooden surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint all as specified and as directed.
M & L for preparation of old painted steel and iron surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint all as specified and diracted
M&L for filling cracks with polymer based chemical (Dr fixit cracks shrink free ) for cracks not exc 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonary including scaffolding etc complete all as specified and directed. Make:- Dr fixit /Berger / Perma
M&L for removal of loose and disintegrated concrete of RCC structual members viz slab, beam column,slabs ,chajjas and lintel etc by low impact hammer including removal of debris outside MD land cleaning the surface by high presure water jet or by air blast and exposed reinforcement bars with wire brush and apply two coats of anti-rust protective chemical at suitable intervals all as per manufactures instruction to resist further deterioration of re-inforcement bar including use and waste form and work providing welded wire mesh of size 50 x 50 mm of wire 3mm and using spray gun presure guniting in CM 1:3, 30mm thick finishing guniting surface in cement mortar 1:3, 10mm including using water proofing compound 2% by weight of cement and finishing even and smooth without using extra cement to match the existing surface and Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works and Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out finishing guniting/painting shall be made by the contractor.complete all as specified and as directed.
Taking down cement plaster from brick/stone wall of any description etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
Material and labour for rendering 15 mm thick on fair faces of brick work or stone masonary surfaces in cement mortar 1:4 and finished the surface smooth and even without using extra cement complete all as specified and as directed
Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and as directed
M & L for rendering 5 mm thick in cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 sqm each patch all as specified and as specified.
Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed
Material and labour for preparation of newly plastered surfaces of walls and applying 2 coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surface and complete all as specified and directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux
Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed
Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash on celings complete all as specified and as directed
M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and wall putty etc all as specified and as directed.
Cutting down plants/trees of girth n exc 15 cm from roof tops/sides of external walls of buildings, chajja, wall junctions, junctions of rain water/soil/waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including reparing the CI/GI/PVC joints of affected locations by applying TUFALO (Herbal medicine) and making good to suit the adjointing surfaces using PCC type 1:2:4, type B-0 or cement mortar 1:2 with necessary scaffolding/staging etc upto any height complete all as per manufacturer instructions and as specified. NOTE: Any CI/GI/PVC pipes and fittings damaged during work shall be replaced by new one to ensure leakage/seepage free joint without any extra cost to the department.
M&L for obilatering old writing of any description, n exc 0.1 sq m, with paint to match existing work complete all as specified and as directed. . Note for Sl item No 1 to 29 :- (i) Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works. (ii) Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out painting shall be made by the contractor. (iii) Unit rate quoted shall be deemed to include for necessary shifting of tables, movable cupboards and other articles required for execution and placing in same position after completion of the work. (iv) Unit rate quoted shall also include for removing of nails, making good holes, cracks etc to match with the existing surfaces. (iv) The user unit will be handed over the qty of material contracted by the MES and same will be issued to the contractor for External periodical services by the user unit.
Resecuring or easing and adjusting door shutter for proper opening/ closing, tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and as directed.
Resecuring or easing and adjusting window shutter, kitchen cupboard shutters, show case shutter, drawers including fixing of screws adjucting handles, knobs tightening piano hinges with small adjustments for proper opening and closing complete all as specified and as directed.
Fixing only the existing butt hinges of any size & material at any location duly tightening the screws or changing the location of butt hinge or changing the screws with new screws and making hinge functional complete all as specified and as directed.
Fixing only the loose/ hanging wooden pelmet boxes in position by using plug/ wooden gutties embeeded in wall making good in cement mortar 1:3 duly fixed with mild steel holder clips including tightening of the screws etc in all respects (each pelmet not exceeding 2.5 metre length) and make it functional complete all as specified and as directed.
S & F in repairs anodized aluminium alloy powder coated curtain rod 19 mm dia of standard thickness with fixing brackets, stops, rollers etc complete all as directed.
Supply and fix in repairs 140 mm long double legged door stopper of aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as directed complete all as specified and as directed
Supply and fix in repair mild steel butt hinges of 100 mm size, medium weight, cold rolled, mild steel complete all as specified and as directed.
Supply and fix in repairs mild steel butt hinges of 75 mm long, medium weight, cold rolled complete all as specified and as directed.
Supply and fix in repairs 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed
Supply and fix in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed
Supply and fix in repairs 200 mm long mild steel barrel tower bolt of extruded section stove enamelled black with bright bolt complete all as specified and as directed
Supply and fix in repairs 150mm long extruded aluminium alloy handle, fabricated type complete all as specified and as directed
Supply and fix in repairs 200 mm long mild steel helical door ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
Supply and fix in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed
M&L in repairs 18mm thick Plywood grade BWR type BB , fixed with screws to frame work , fixed with svrews to timber frame work all as specified and directed as in repairs.
M&L in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.
M&L in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.
S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised 40mm width of flap fixed with screws as in repairs
Supply and fix butt hinges of 50mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type E-22 complete all as specified and as directed
Supply and fix in repairs 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed
M&L IInd class hard wood plain fillets of sectional area exc 6& not exc 13 sqcm area .square,rectangular or triangular insection, clean sawn, secured with nails or brads.with bullnosed,splayed,chamfered or rounded on one edge or face
S&F 40mm dia, cuboard knobs brass, polished and fixed with nut, screw and washer of mild steel ,bright finished etc complete all as specified and as directed by the Engineer in charge.
Supply and fix in repairs 2nd class hard wood plain small fittings such as brackets of any type , latch and hinge blocks, shaped door and window stopes and the like , including all necessary labours, articales not exc 200cum each complete all as specified and as directed
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 SQMs each complete all as specified and as directed
Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.30mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square saftey grills, locking arrangement and all necessery accessories etc, completed all as specified and directed. Make: NCL/ELEXIRMET/M/s ASHWANI & SONS
Hacking out old broken glass (any thickness, size, quality or description) from wooden surface concrete or brick surrounds. Glazed with putty or fixed with beads all as specified.
S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.
S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square but exceeding 0.5 Sqm in each pane and all as specified.
S & F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.
S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and as directed
Supply and fix in repairs 0.56 mm thick plain anodised Aluminium sheeting alloy 31000 H4 in covering to door shutters etc fixed with aluminium alloy screws complete all as specified and as directed.
Dismantling of wrought iron or MS works of any description such as chajja etc., including necessary straightening of bends complete all as specified and directed.
Dismantling of CGI/PGI sheet roofing any gauge and any thickness including ridge, valley gutter etc complete all as specified and as directed.
M & L welding in repairs not exceeding 2.5 cm in length with thickness of metal not exceeding 6mm complete all as specified and as directed.
M & L welding in repairs exceeding 2.5 cm but not exceeding 5 cm in length with thickness of metal not exceeding 6mm complete all as specified and as directed. Note: (1) Works shall be carried out in multi storey Building upto 2nd floor.
M&L for Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe 410-W Gde E-250 quality A and complete all as specifed and directed. .
Supply and fix rolled mild steel sections of Fe 410-W (GDE E-250) QUALITY “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed
S&F wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed.
Supply and fix pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed
Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed
M&L for new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint (ordinary tint) including priming with red oxide, zinc chrome complete all as specified and directed by Engr-in-Charge.
M & L for wire brush and cleaning any type over roof and chhajja top surface etc, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu. m per sq. m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets etc complete all as specified and directed.
S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 38x24.7x0.30mm cross tee 26x24x0.30mm and wall angle 24x24x0.30mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and and as directed
Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed
Material and labour for half brick thick walls with sub-class ‘B’ old size bricks, straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and as directed
Demolition of cement concrete (unreinforced) in floor of paving not exceeding 15 centimetres thick below or above ground level complete all as specified and as directed.
Material and labour for 75 mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection , at 3 metre interval and every change of direction duly filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed
M&L for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.
M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade etc complete all as specified and as directed.
Spreading and levelling of Sand/ grit cushioning below interlocking tiles.
M&L for designer rubber moulded chequerred cement concrete tiles with mixture of grey and white cemetn in equal porportions with pigments of size 300 x 300 x 22mm or 250 x 250 x 22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layier in CM 1:6, 15mm thick for laying floor finishes etc complete all as specified and as directed.
M&L for pre cast Machine pressed cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc size shall be decided and directed by GE
Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD land complete all as specified and directed.
M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 etc: complete all as specified and directed.
M&L for Rendering 10 mm thk in CM (1:4) as in backing coat of cement plaster for laying of wall tiles etc: complete all as specified and directed.
S&F Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specifed and as directed.
M&L for Glazed (Coloured) ceramic tiles in vertical surfaces 300 x 450 x 8 to 9 mm/ 450 x 350 x 8 to 9 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to matchetccomplete all as specified and as directed.
Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar
M&L for 20 to 25mm thick machine cut and machine polished cudappa stone slab for kitchen plateform jointed and set in CM 1:3 and fixed including rounding to edge of stone slabs one side edge etc complete all as specified and as directed
M&L for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like laid over & including 10mm thick bedding /backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed.
Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.
Demolition of concrete in sunken floor incl removal of filling etc complete incl removal of demolished material to a distance as specified.
Material and labour for rendering 15 mm thick on fair face of brickwork or concrete surfaces of sunken floors duly mixed with water proofing compound as per manufacturer's instructions in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed Note : Water proofing compound shall be measured and paid separately under relevant items in this schedule.
Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litre per SQM after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP polymeric membrane of weight 3 kilogram per SQM and minimum 3mm thick reinforced with polyster non oven fabric (weight not less than 150 gm/SQM) over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per SQM over that providing a sand layer of 25mm thick thick in sunken floors complete all as specified and as directed.
Supply only integral water proofing compound.
M&L for plain cement concrete, Type E2 (1:5:10) mix (Using 40 mm graded stone aggregates) for filling in sunken floor and mass concrete complete all as specified and as directed.
Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends etc complete all as specified and directed
S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in ground shape etc complete all as specified and as directed.
S&F 75mm bore UPVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.
S&F 110mm bore UPVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.
S&F 75mm bore UPVC/PVC (SWR) bends any radius dimnishing pieces or tapers with access doors etc, complete all as specified and as directed.
S&F 110mm bore UPVC/PVC (SWR) bends any radius dimnishing pieces or tapers with access doors etc, complete all as specified and as directed.
S&F 75mm bore UPVC/PVC (SWR) branch piece, single (single Y ) equal or unequal with access doors etc, complete all as specified and as directed.
S&F 110 mm bore UPVC/PVC (SWR) junction single (single T ) equal or unequal with access doors etc, complete all as specified and as directed.
S&F for 75mm bore UPVC/PVC (SWR) vent cowl etc, complete all as specified and as directed.
S&F for 110 mm bore UPVC/PVC (SWR) vent cowl etc, complete all as specified and as directed.
Repairs to leaking bib taps, pillar taps, stop cock, angle valve, PVC connection, waste pipes, float valves, concealed stop cock, GI pipe joints, botttle traps etc of any description by changing the washers or any other minor accesssories required to make the system functional complete all as specified and as directed.
Repairs to high or low level flushing cistern by adjusting the float valve, leakages through or PVC connection / GI bend by replacing of rubber washer, cheek nuts, plunges etc to any type of flushing cistern and to make the cistern functional complete all as specified and as directed.
Supply and fix in repairs brass face spindle heavy duty for pillar cock, chromium plated stop cock, chromium plated bib cock, concealed stop cock complete all as specified and as directed
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 40mm complete all as specified and directed.
Cutting and grooving of wall for fixing of CPVC pipe lines and after fixing of CPVC pipe line and making good of all cutting surfaces etc complete all as specified and directed.
S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions ,sockets , male and femaleThreaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.
S&F Tubes, ‘medium grade’ galvanised, 15 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F GI tube medium grade of 40 mm bore with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed.
S&F for 20mm gun meteal,globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as directed.
Cutting holes into or through brick/ stone walls built in cement mortar of superficial area n exc 150 Sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed
S&F stainles steel sink with drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement morter to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed. Make : Nirali, Bule star ISI marked.
Supply and fix in repairs stainless steel sink overall size 495mmx420mm bowl size 410mmx330mmx160mm made out of stainless steel 1 mm thick for kitchen with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall, CI brackets and connecting to union / pipe complete all as specified and as directed Make : Nirali, Bule star ISI marked..
S&F in repairs stainless steel kitchen plate rack of Cat NoP-348 etc complete all as specified and directedMake:Prayag polymers Pvt Ltd or equivalent
S&F in repairs vitreous china water closet 'Orissa' pattern of size 580mm X 440mm, white with integral foot rest (excluding flushing cistern), but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed.
S&Fin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed..
S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed.
S&F in Low level flushing cistern 10 ltr capacity, PVC incl waste pipe, down take pipe, pair of CI brackets and all accessories complete all as specified and as directed.
Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 450mm complete all as specified and as directed
Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 600mm complete all as specified and as directed
Supply and fix in repairs 125 mm dia brass chromium plated shower rose with swivel joints with stainless steel arm duly ISI marked complete all as specified and as directed
Supply and fix in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc including screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed. Make: CAT No F160038 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved
Supply and fix in repairs 15mm dia brass chromium plated Two way Bib tap with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed. MAKE: CAT No F200004FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved
S&F in repairs CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs Pillar taps, fancy type, chromium plated, screwed down, high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and as directed.
Supply and fixed in repairs PTMT bath room mirror cabinet of size 330x430mm complete all as specified and as directed MAKE: CAT No 551 of PRAYAG or equivalent model in POLYTUF as approved by GE
S&F in repairs Towel Rail, 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats . (Minimum weight 190gms) complete all as specified and as directed.
Supply and fixed in repairs 15 mm dia bib tap of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed.
Supply and fixed in repairs 15 mm dia Stop valve of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed.
Supply and fixed in repairs 15 mm dia Angle Stop valve of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed.
Supply and fixed in repairs 15 mm dia Pillar tap fancy type of standard PTMT of any colour screwed for iron pipe minimum weight 120 grams complete all as specified and as directed.
Supply and fix in repairs 15 mm bore swivel shower of PTMT any colour minimum weight 40 grams complete all as specified and as directed.
Supply and fix in repairs 32 mm dia waste fittings, brass chromium plated for wash basins with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed
Supply and fix in repairs 40 mm dia waste fittings, brass chromium plated for sink with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed
Supply and fix 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed to wall ceiling or in floors etc. complete all as specified and as directed
Supply and fixed in repairs PVC waste pipe 32/40 mm dia fixed to WHB/Kitchen Sink complete all as specified and as directed
Supply and fix in repairs 125mm dia chromium plated grating for nahani traps with or without hole for waste pipe complete all as specified and as directed.
S&F in repair CP corner glass 12mm thick with brass bracket screws etc complete all as specified and directed.
S&F in repair Ball valve of size 15mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Make:- PRAYAG / SYMET/ZOLOTO/LEADER.
All as per item No. 153 above, but of size 20 mm dia.
All as per item No. 153 above, but of size 25 mm dia.
Supply and fixed in repairs 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed
Supply and fixed in repairs 500 litres capacity rotational moulded polyethylene water storage tank of triple layer type (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed
sai construction
R G NAIDU CIVIL CONTRACTOR AND BUILDERS
KIRAN CONSTRUCTIONS
LAKSHMI ENGINEERS
Pragathi Infrastructure Co.
S.R.M.K Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .