Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹38.3 LAccepted-AOC | ₹38.3 L | L-1 | Accepted-AOC Being lowest bidder |
| 2 | L-2₹38.6 L+₹29,888.05 (0.78%)Rejected-Finance | ₹38.6 L+₹29,888.05 (0.78%) | L-2 | Rejected-Finance Other than lowest bidder |
| 3 | L-3₹54.5 L+₹16.2 L (42.1%)Rejected-Finance | ₹54.5 L+₹16.2 L (42.1%) | L-3 | Rejected-Finance Other than lowest bidder |
| 4 | L-4₹56.5 L+₹18.1 L (47.3%)Rejected-Finance 5 A LANE 1 GREATER KAILASH JAMMU J K 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | ₹56.5 L+₹18.1 L (47.3%) | L-4 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | NARESH KUMAR AND COMPANY L4 | M/S TRIKUTA BUILDERS L3 | M/s J.S Enterprises L2 | ASHFAQ AHMED MANHAS L1 |
|---|---|---|---|---|---|---|---|
| 1.00SCHEDULE - 'A' PART - I (DAY TO DAY ONLINE/ OFFLINE COMPLAINT) | |||||||
| 1.01Note: - Rates quoted above all items inclusive provision as under: - Making arrangement for establishment of centralized complaint centre in the existing building as under: - (a) Contractor shall be given user id and password for accessing the online complaint portal and contractor shall at his own expense by himself or his representative feed the data in r/o complaints so generated. (b) Manually registered complaints shall be obtained everyday from MES complaint cell and rectification or otherwise shall be intimated to JE-in-Charge of the cell for updation of manual registers. (c) Provision and maintenance of all tools, plants, equipment and safety gear required for tradesmen under this contract. (d) Provision of communication and conveyance (as required) facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints on a daily basis. (g) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone. (h) On lodging the complaint, the Complaint No will be assigned for reference. Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen. (j) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. (k) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending, probable time required for attending the pending complaints etc. (l) JE-in-Charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (m) AGE will visit the complaint cell at least twice a week to check the efficacy of the system and record their remarks accordingly. Space for complaint cell/Office and Store will be provided by the Department. (n) The tradesmen engaged in the contracts shall be ITI qualified from a Govt recognised Institute and the contractor is required to get the same approved from Accepting Officer (before applying for their security passes) immediately on acceptance of contract. (o) All tradesmen shall be dressed in a common uniform and quoted rates should be inclusive of that. Tradesmen not wearing uniform shall not be allowed in the gate and any loss on that account shall be attributable solely to the contractor. | |||||||
| 2.00 | Supply and fixing in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses complete all as specified and as directed. | 1 | Each | 2,500 ₹2,500 | 2,500 ₹2,500 | 1,300 ₹1,300 Lowest | 2,900 ₹2,900 |
| 3.00 | Supply and fixing in repair Sink Mixer swan neck with Swinging Spout (Wall Mounted Model) with Connecting Legs and Wall Flanges complete all as specified and as directed. | 1 | Each | 2,500 ₹2,500 | 2,500 ₹2,500 | 1,300 ₹1,300 | 1,000 ₹1,000 Lowest |
| 4.00 | Supply and fixing in repair 15 mm bore bib taps long nose/long body, cast copper alloy chromium plated fancy type with capstan head handle screwed down, screwed for brass, weight not less than 450 gms ferrule and fixed complete all as specified and as directed. | 35 | Each | 850 ₹29,750 | 700 ₹24,500 | 430 ₹15,050 | 425 ₹14,875 Lowest |
| 5.00 | Supply and fixing in repair 15mm bore Bib taps chromium plated fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. | 5 | Each | 800 ₹4,000 | 700 ₹3,500 | 430 ₹2,150 | 380 ₹1,900 Lowest |
| 6.00 | Supply and fixing in repair angle cock with wall flange, cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe complete all as specified and as directed. | 15 | Each | 500 ₹7,500 | 700 ₹10,500 | 230 ₹3,450 Lowest | 380 ₹5,700 |
| 7.00 | Supply and fixing in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and as directed. | 25 | Each | 800 ₹20,000 | 1,000 ₹25,000 | 480 ₹12,000 Lowest | 560 ₹14,000 |
| 8.00 | Supply and fixing in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position fixed in repairs complete all as specified and as directed. | 25 | Each | 550 ₹13,750 | 600 ₹15,000 | 290 ₹7,250 Lowest | 470 ₹11,750 |
| 9.00 | Supply and fixing in repairs chromium plated jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and as directed. | 5 | Each | 400 ₹2,000 | 200 ₹1,000 | 160 ₹800 Lowest | 425 ₹2,125 |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
3 Aug 2026, 6:00 pmClosed
GE Jammu
GE Jammu c/o 56 APO Pin-180011
COMPREHENSIVE REPAIR OF B/R AND E/M NATURE WORK OF OTM ACCN INCL ROOF TREATMENT, PLASTER, JOINERY, SUMMER/WINTER APPLIANCES, PT WIRING ETC IN C BN LINE AT SUNJUWAN UNDER GE JAMMU
2026_MES_770541_2
GEJC-08/2026-27
Open Tender
Civil Works
Item Rate
180 days
AoR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jamnmu
₹94,000
Yes
10 Sept 2026
13 Jul 2026
5 Aug 2026
13 Jul 2026
3 Aug 2026
20 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | SCHEDULE - 'A' PART - I (DAY TO DAY ONLINE/ OFFLINE COMPLAINT) | - | - | - | - |
| - | Supply and fixing in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses complete all as specified and as directed. | 1 | Each | 1.25 | ₹1.25 |
| - | Supply and fixing in repair Sink Mixer swan neck with Swinging Spout (Wall Mounted Model) with Connecting Legs and Wall Flanges complete all as specified and as directed. | 1 | Each | 1.25 | ₹1.25 |
| - | Supply and fixing in repair 15 mm bore bib taps long nose/long body, cast copper alloy chromium plated fancy type with capstan head handle screwed down, screwed for brass, weight not less than 450 gms ferrule and fixed complete all as specified and as directed. | 35 | Each | 1.25 | ₹43.75 |
| - | Supply and fixing in repair 15mm bore Bib taps chromium plated fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. | 5 | Each | 1.25 | ₹6.25 |
| - | Supply and fixing in repair angle cock with wall flange, cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe complete all as specified and as directed. | 15 | Each | 1.25 | ₹18.75 |
| - | Supply and fixing in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and as directed. | 25 | Each | 1.25 | ₹31.25 |
| - | Supply and fixing in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position fixed in repairs complete all as specified and as directed. | 25 | Each | 1.25 | ₹31.25 |
| - | Supply and fixing in repairs chromium plated jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and as directed. | 5 | Each | 1.25 | ₹6.25 |
| - | Supply and fixing in repair fancy type toilet paper holder, steel chromium plated approximate size 140 x 140 x 50mm complete all as specified and as directed. | 2 | Each | 1.25 | ₹2.5 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
BOQ_871515.xls
BOQ • 0.52 MB
Tender_R.pdf
Tender Documents • 1.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .