PROVISION OF REGULATING OFFICE IN ADMIN BUILDING AND SPECIAL REPAIRS TO FLAG POLE AND FLAG MAST STRUCTURE AT INS BAAZ CAMPBELL BAY

Amount

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid in cement mortar complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Material & Labour for Rolled mild steel sections conforming to Fe 410 -W (Grade E- 250, Quality A) as in Flag post with pulley at the top and shear bars to the sides fixed with angle cleats or other connecting plates complete all as specified and as directed.

Material & Labour for 75mm thick PCC 1:4:8, Type D2 (using 20 mm graded stone aggregate), as in sub base complete all as specified and as directed.

Supply & Fix 20 to 25mm thick Chequered cement concrete floor tiles (300x300mm) laid over Screed bed or bedding layer of mortar 15mm thick cement mortar 1:6 laid with and including grey cement and pigmented , laid in cement slurry and pointed with grey cement with pigment to match the shade complete all as specified and as directed

Supply & Fix 32 mm dia Stainless steel pipe decoratively rounded at top along with Stainless Steel Chain 1'' fixed to pipe including all fixing arrangements complete all as specified and directed by Engineer in charge.

Material & Labour for 18mm thick Granite slabs of any type & Colour as Approved by Engineer In Charge, machine cut as in floor over Screed bed or bedding layer of 15 mm thick Cement Mortar 1:6, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as directed and specified .

Material & Labour for 18mm thick Granite slabs of any type & Colour as Approved by Engineer In Charge, machine cut as in skirting/Dado laid over Scrred/backing coat of 10 mm thick Cement Mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as directed and specified .

Material & Labour for precast cement concrete Hollow block masonry with hollow blocks, exc. 10 cm in width of type C1 1:3:6 (using 20mm graded aggregate) setting in Cement Mortar 1:6 complete all as specified and directed.

Material & Labour for Rendering 10 mm thick in cement plaster 1:6 on fair faces of concrete surfaces finished even and smooth without using extra cement all as specified and directed.

Material & Labour for Rendering 15 mm thick in cement plaster 1:4 on fair faces of concrete surfaces surface finished fair and even mixed with WPC as per manufacturer's instructions complete all as specified and directed. (NOTE: WPC shall be measured and paid separately as Supply only).

Supply only of Integral waterproofing compound of approved make all as specified and directed.

Material & Labour for preparation of newly plastered or unplastered surfaces of walls and applying two coat of distemper oil emulsion white tinted over a coat of alkali resistant primer complete all as specified and directed.

Material & Labour for preparation of newly plastered or unplastered surfaces of walls and applying two coat of cement base paint over a priming coat complete all as specified and directed.

Supply & Fix standard aluminium anodised section as in frame, shutters for doors, window/ventilators fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets/aluminium clips for fixing glass,hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS, whichever is less shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes/particle board, shall be measured and paid separately as supply only under respective items.

Supply & Fix 5.5 mm thick Sheet Glass, ordinary quality and glazing with aluminum doors / partitions complete all as specified and directed.

Supply & Fix 4 mm thick Sheet Glass, ordinary quality and glazing with aluminum windows complete all as specified and directed.

Material & Labour for 12 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed to aluminum doors / partitions complete all as specified and directed.

Supply & Fixing of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material & Labour for Hard core of gauge n.exc 63 mm, with broken stone or boulders, deposited, spread and levelled in layers n.exc 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.

Material & Labour for 75mm thick plain cement concrete type C-1, 1:3:6 mix (using 20mm graded stone aggregate) as in plinth protection, pavings, path etc. surface finished even and smooth without using extra cement including making 6 mm wide grooves to the full depth @ 2 to 3 m interval and at every change of direction and fillied the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight complete all as specified and directed.

Supply & Fixing of 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework in ceilings with and including Anodised aluminium snap grid frame work of size 605 x 605mm for false ceiling with runners aluminium anodised main Tee of section 35x35x1.5mm thick cross T of section 25x25x1.5mm thick & aluminium anodised angle of size 25mmx1.5mm thick section fixed along side of wall fixed with necessary plugs & hanging from ceiling/MS purlins with and including 4mm GI wire suspension system including necessary scaffolding and applying three coats of white wash to ceiling boards complete all as specified and directed.

Material & Labour for 10 mm thick Non skid Virified Ceramic tiles (square/ rectangular) area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Ditto all as per item No 23 but for vertical surfaces as in skirtings over 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Material & Labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete flat complete all as specified and directed.

Material & Labour for Reinforced cement concrete 1:2:4 using 20 mm graded stone aggregate as in beams, bands, cantilevers, bressummers, lintels over 1.5m span including necessary scaffolding etc, complete all as specified and directed.

Material & Labour for formwork to chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat complete all as specified and directed.

Material & Labour for Reinforced cement concrete 1:2:4 using 20 mm graded stone aggregate as in Chajjas including necessary scaffolding etc, complete all as specified and directed.

Material & Labour for for Mild steel TMT reinforcement Bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

Material & Labour for for Mild steel TMT reinforcement bars of 5 mm dia and over up to 10 mm dia as in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clip complete all as specified and directed.

Excavation in trenches not excceeding 1.5m wide and not excceeding 1.5 m deep including geeting out in soft/loose soil for laying of UG cable complete all as specified and directed.

Returning, filling in layers not excceeding 25 cm with excavated earth including spreading, levelling, watering and well ramming complete all as specified and directed.

Removal of surplus excavated earth to a distance not exceeding 50 m and deposited where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Material & Labour for point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including medium grade rigid non metallic PVC conduit of suitable size not less than 20 mm dia with all necessary fittings in Concealed conduit in wall/roof/floor on wall/roof surfaces including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing including provision of Gang box/ 2.0mm thick MS terminal box for fixing switches, sockets, fan regulators etc fixed to wall with 3mm thick laminated sheet top cover complete all as specified for light point controlled by one switch.

Ditto all as per item No 34 but for fan point controlled by one switch.

Ditto all as per item No 34 but for 3 pin 5 Amps socket point controlled by one switch on independent board.

Material & Labour for point wiring with 2.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including medium grade rigid non metallic PVC conduit of suitable size not less than 25 mm dia with all necessary fittings in Concealed conduit in wall/roof/floor on wall/roof surfaces including one run of 2.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing including provision of Gang box/ 2.0mm thick MS terminal box for fixing switches, sockets, fan regulators etc fixed to wall with 3mm thick laminated sheet top cover complete all as specified for 3 pin 15 Amps socket point controlled by one switch on independent board

Supply & Fix Switch piano, 6 Amps, one way, single pole, 240V, flush type complete all as specified and directed.

Supply & Fix switch socket combination 3 pin, 5 Amps, 240V, flush type complete all as specified and directed

Supply & Fix switch socket combination 3/5 pin, 15 Amps, 240V, flush type complete all as specified and directed.

Supply & Fix Ceiling rose surface bakelite 65 mm x 50 mm ,3 terminals complete all as specified and directed.

Supply & Fix Fan regulator electronic type, 240 V, 5 steps including connection complete all as specified and directed..

Supply & Fix Ceiling fan 1200 mm sweep, 5 star rating with all fixing arrangement like nuts,bolt and clamps complete all as specified and directed.

Material & Labour for XLPE insulated, armoured heavy duty under ground electric cable with stranded aluminium conductor, 1100 volts grade of cross sectional area 16 Sqmm 2 core laid in trenches/fixing on walls/poles or passing through pipe including connecting up with suitable glands, lugs, nuts and bolts wherever required and testing complete all as specified and directed.

Material & Labour for HDPE Double Wall Corrugated (DWC)pipes,ISI marked,with outer diameter 50 mm and inner diameter 38 mm conforming to IS-14930 Part-II including necessary pipe fittings such as couplers,end caps,bends etc laid in trenches/on pole for cable protection complete for cable protection complete all as specified and directed.

Supply & Fix MCB DB SPN 8 way,double door, with 200 amp rated busbar 240 V,recess mounted complete all as specified and directed.

Supply & Fix MCB SP 6-32 amps, 10KA, 'C' series complete all as specified and directed.

Supply & Fix MCB TPN 32 amps, 10KA, 415V, 'C' series complete all as specified and directed.

Material & Labour for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and including GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provision of charcoal and salt etc all as per electrical plate No 5 of SSR Part-I including RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit including excavation and earth work in any type of soil and testing on completion etc complete all as specified and directed. (NOTE:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)

Material & Labour for 4mm dia GI wire earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe complete all as specified and directed.

Supply & Fix LED tube light fitting, 1 x 20 watt, 230 volts, Energy efficient with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 Sqmm complete all as specified and directed. Make: Bajaj Cat Part No.BLTRU VIVA with 1 x 20 W Lamp equivalent in Philips/Wipro/Havells.

Supply & Fix LED sreet light fitting, 45 watts, pressure die cast aluminium housing LED street light luminaries, heat resistant toughened glass with frame, IP 66 protection in and including brackets made out of GI pipe 50mm dia of 1.2m length ,light grade, bend to shape as required, with two set of clamp made out of flat iron 50x6mm, bolt, nuts and washers with and including two coats of aluminium paint over one coat of red oxide/zinc chrome primer,connecting electrically with PVC multi stranded copper cable of suitable size also including 30 watts lamp complete all as specified and directed. Make- Cromton'Nexus+' Cat Part No-LSTO-45-CDL or Equivalent in Philips/Wipro/Havells.

NOTE : An Amount of Rs 2,050/- towards Schedule of Credit shall be deducted to arrive the Contract Sum

CHANDER SEKER ENTERPRISE

ANITA VARMA ENTERPRISES

M/S PANNER SELVAM

RS ENGINEERING WORK

AR CONSTRUCTIONS

S K ENTERPRISES

V CHINNA DURAI