PROVN OF RECEPTION COUNTER AND CONNECTED B/R AND E/M WORK IN SMC AT BHISIANA UNDER GE (AF) BHISIANA

Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Material and labour for brick work in half brick thick wall straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position and including disposal of rubbish material to any distance out side MOD land complete all as specified and as directed.

Material and labour for PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed.

M&L for providing vitrified tiles (approved light shade), as per IS 15622: 2017 and IS 13712: 2019, group B Ia, having thickness not less than 8mm, premium quality having water absorption should be between 0% to 0.5%, straight edge/rectified, stain free, area of each tile exceeding 0.18 Sqm but not exceeding 0.42 Sqm (square/rectangular), as in Flooring and connected skirting, set and jointed in Neat Cement Slurry and pointed in White/Coloured Cement, laid over and including Screed Bed 15mm thick for floor and 10mm for skirting in Cement Mortar (1:4), complete all as specified and as directed.

Material and labour 16-18mm thick approved shade Granite (like dark black, mahroom etc), machine cut, duly factory grinding and polishing (table rubbed and polished), as in table tops, steps, treads, risers, jambs, pillars, window cills, cooking platforms, for counter sunk wash basin, Reception Counter and like or similar locations where directed, set & jointed in and including neat cement slurry, laid over and including 15mm thick cement mortar (1:4) screed bed, and pointing in white cement mixing with pigment to match with shade of slab, including cutting, dressing, edge finishing, rounding of exposed edges where required, including cleaning and extra polishing if required complete all as specified and as directed. Note : (i) Single piece should be used in steps/jambs/shelves, equal to width of slab (ii) The rate shall be deemed to include for accommodating holes/openings for gas pipes in kitchen cooking platforms and cutting for countertop/table top and for under-counter wash basins, wherever required to suit the dimensions of the item being fixed. No extra payment shall be admissible on this account.

Supply & fixing Hydraulic Door Closer Pelmet Arm & PVD (Physical vapor deposition) Cover Door Closer (overhead door closers), With a wide 130-degree opening and an adjustable closing speed, Load Capacity 85kg, door opening 800 to 1200mm, Commercial-grade aluminium alloy, Weather-proof and rust-resistant complete all as specified and as directed.

Material and labour for fabrication and fixing of aluminium doors/windows/ventilators (glazed, fly proof), partitions and fixed glazing units of any type, provision of window AC or Cooler, including side-hung, top-hung, sliding window, fixed, partition type, with or without sash bars and mullions/transoms, fabricated from aluminium extruded sections conforming to IS:733 and IS:1285. The work shall be carried out using standard tubular sections, Z-sections and other approved aluminium sections suitable for frames, shutters, rails, stiles, mullions, transoms and glazing members, complete with one or more rebates, sliding channel as required. The aluminium sections shall be powder coated with a minimum coating thickness of 50 microns and shall be straight, smooth, free from defects, properly mitred and mechanically jointed with approved cleats, brackets, screws and fasteners. The item shall include all necessary joining cleats, glazing clips, EPDM/neoprene gaskets, weather seals, anodised aluminium snap beading, screws and anodised aluminium hardware/architectural aluminium mongery including hinges, pivots, peg stays, handles, tower bolts, sliding door bolts, dash fasteners, rollers, guides and other fittings as required for proper operation of the doors/windows/ventilators. The frame shall be fixed in position with approved fasteners consisting of PVC rawl plugs and fully threaded steel screws of suitable size, complete with all cutting, fitting, making good disturbed surfaces and all other incidental works necessary for satisfactory completion of the work, any approved design complete in all respects as specified and directed by the Engineer-in-Charge. Notes: (i) The weight of each aluminium section or complete door/window/ventilator shutter, including all fittings, accessories and aluminium hardware, but excluding decorative grills, glass, wire cloth, prelaminated boards and other panel-filling materials, shall be physically ascertained at site in the presence of the Engineer-in-Charge. Payment shall be made only on the basis of the actual weight so determined. (ii) Panel-filling materials such as glass, prelaminated boards, wire cloth, decorative grills or any other infill materials shall be fixed only after the weight of the shutter has been physically ascertained. No claim whatsoever arising from the exclusion of such panel-filling materials from the measured weight shall be entertained. (iii) Glass, prelaminated boards, wire cloth, decorative grills, door closers and other panel-filling materials shall be measured and paid for separately under the respective BOQ items. (iv) Measurement for payment shall be made in kilograms (kg) based on the actual weight of aluminium work fixed in position, including approved fittings and aluminium hardware but excluding items specifically measured and paid separately.

Supply & fixing 12mm thick particle board as per IS 12823: 2015, interior grade BWR grade bonded with phenol formaldehyde synthetic resin, pre-laminated both side with decorative choice lamination, fixed to aluminium door frame work all as specified and directed. Note :- Cost for Aluminium fittings and beading for securing the board shall be included in main item of aluminium window/ventilator of BOQ.

Supply & fixing 5.5 mm thick sheet glass ordinary quality in squares/rectangular any area upto 1.5sqm in each pane (aluminium door/window/ventilator) complete all as specified and as directed by Engineer-in- charge. (i) The cost of fixing members/accessories forming part of the respective door/window/ventilator frame, such as glazing beads, retaining flats, clips or other holding arrangements, shall be deemed to be included in the respective BOQ item and nothing extra shall be paid on this account. (ii) The quoted rate for this item shall include all minor consumables and incidental materials or other small fixing accessories, required for proper fixing of the glass. No extra payment shall be admissible on this account.