SPL REPAIR TO BLDG NO P-11 AND P-12 IN THE AOR OF AGE B/R-II UNDER GE 864 EWS, JOB NO W/SR (BLDGS)-07/BB CANTT/2025-26)

Amount

Dismantling of plain or corrugated steel sheeting, any gauge thickness , including Nanital or similar pattern roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws all as specireid and directed

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws all as specireid and directed

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded in any mortar complete all as specified and directed

M&L 20mm thick granite (of any type) work (table rubbed and polished) in step, jambs, pillars, window-cills, cooking platform, floors etc and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed in CM 1:6 including complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails as in flooring, ceiling, cupboard, drawers, showcase, cupboard shutters, wooden shelves, partition, wooden flooring etc complete all as specified and directed.

S&F 25mm thick second class hardwood in flooing planed one side, with butt joints and fixed with nails including beading, fillets, cornices etc complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for rendering 10mm thick in cement mortar 1:4 on brick work or concrete surfaces finished even and fair without using extra cement all as specified and directed.

M&L for preparation of newly plastered wall surfaces and appying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed

M&L preparation of old plastered/unplastered wall surfaces by washing down, brooming down ,steel wire brushing and removing all grass, vegetation or shrubs from wall and roof etc and applying two coat of cement base paint complee al as specified and directed.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L complete removal of existing treatment including scraping,removing all mud,cake with wire brush and gunny bags from old plastered surfaces and applying 3 mm thick white putty to obtain smooth/even finish using sand paper complete all as specified and directed.

M&L preparation of old wall surfaces and applying two coat of oil bound distemper with roller complete all as specified and directed.

M&L for french polishing on surface of any descriotion, width or girth cleaning and preparation the surfaces including a coat of wood filler on new/old surfaces with two or more coats complete all as specified and directed.

S&F 25 mm dia stainless steel drapery curtain rods, heavy duty, fancy type with fancy brackets & domes two in each door and window complete all as specified and directed (Sample as approved by GE).

Dismantling timber scantling (Unframed work) like purlins, rafters etc 40 sqcm and over in section in any position complete all as specified and directed.

M&L second class hardwood clean sawn in scanlting as in purlins, rafters and trusses etc complete all as specified and directed

Taking down chowkats or frames with shutter area not exceeding 1.50 Square metre (without taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete, all as specified and directed.

Taking down chowkats or frames with shutter area exceeding 1.50 Sqm and not exc 4.00 Sqm (without taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete all as specified and directed.

S&F for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S&F 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.

S&F 30mm thick 2nd class hardwood factory made glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed

M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concret, glazed with putty or fixed with beads complete all as specified and directed.

S&F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares/rectangular window pane n.exc 0.5 sqm in each panes etc complete all as specified and directed

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares/ rectangular of window panes exceeding 0.50 Sqm in each pane complete all as specified and directed

S&F stainless steel butt hinges medium weight 100 mm long etc complete all as specified and directed.

S&F stainless steel butt hinges medium weight 75 mm long etc complete all as specified and directed.

S&F 150 mm long extruded aluminium handles fabricated type, anodised all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded sections all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy all as specified and directed.

S&F 100 mm long aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles 30cmx30cmx25mm thick with grey cement and pigments over 20mm thick screed bed or bedding layer in cement mortor 1:6 over 75 mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate), set, jointed and pointed in neat cement slurry including demolition/ dismantling of tiles complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

M&L 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work all as specified and directed.

S&F in repairs 15mm bore brass CP mixer (WHB/Sink/wall) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe) including PVC seat cover (closed pattern), connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, health facet etc complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe of polyethylene of low or high density or PVC. 32 mm dia all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S&F in repairs vitreous china pedestal wash basin of size 550x400mm (flat back or angle back type) including brackets cutting for and pinning in ends of brackets or erecting stand inclusive 32mm waste fittings, brass, chromium plated for basins, waste pipe etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and waster pipe etc complete all as specified and directed.

S&F in repairs toilet paper holder, white vitreous china, box type, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repairs soap dish, vitreous china white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs brass chromium plated Tubular towel rail 20mm dia 60 cm long complete all as specified and directed.

S&F towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified and directed.

S&F in repairs 15mm bore bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repairs 15mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F 500 litres capacity rotational moulded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part I including dismantling PVC water tanks exc 250 litres and not exc 500 litres capacity etc complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes including necessary bends, fittings etc single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC(SWR) branch piece single equal or unequal 110mm complete all as specified.

S&F PVC(SWR) branch piece single equal or unequal 75mm complete all as specified.

S&F PVC(SWR) bends any radius 110mm complete all as specified.

S&F PVC(SWR) bends any radius 75mm complete all as specified.

S&F PVC(SWR) 'S' trap any radius 110mm complete all as specified.

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed.

S&F 3 layer PPR polypropylene random co polymer concealed pipes of 20 mm outer dia SDR7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors complete all as specified and directed

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, with all fitting and fixtures complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet , reinforced with steel square tube , complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortor bedding(but not backing) removable serviceable tiles to store including rubish of the premises, all as specified.

M&L for glazed ceramic coloured tiles of size 350x250x7mm /450x300x7mm thick, best quality as on skirting, dados, walls, vertical surfaces etc., set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for non skid coloured ceramic tiles, 7-8mm thick (square/ractangular), area of each tile exc 0.06 Sqm but not exc 0.11Sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick in CM 1:4 screed bed or bedding layer, complete all as specified and directed.

M&L in repair 2mm thick linoleum, plain coloured, laid dry in floors including stretching, cutting and sealed down with an approved adhesive all as specified and directed.

S&F in repair for 3 tier corner glass shelf of size 300x300mm(Big), 200x200mm (Medium) & 150x150mm (Small) three set, with CP brackets and railing complete all as specified and directed

Dismantling cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from trenches, if required, complete all as specified and directed

S&F in replair chromium plated health faucet, telephonic type with CP flexible arms 1.0 mtr long, suitable to fixed to 15mm bore CP angle valves, complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces including prepararion complete all as specified and directed.

S&F 15mm thick second class hardwood boarding as in ceiling planed one side, with butt joints and fixed with nails including beading, filltets, cornices etc complete all as specified and directed.

M&L wooden laminated flooring in strips 1200x200x6 to 8mm thick having fire rating class B1 fixed over PVC sheet and cushion over 12mm thick plywood grade BWR type BB 5 Nos of Ply fixed with nails to timber including beading/cornices and tee all as per manufacturer's instructions and directions fixed, complete all as specified and directed.

M&L for taking down carefully existing old burnt out / unserviceable aluminium / copper point wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing all type of fittings & fixture alongwith it connected fixing acessories such as switches, sockets, ceiling roses, holder,regulators,bell etc and removing of all the old materials from the site for including making good to disterbed surfaces to match with existing specification complete all as specified and directed by EIC .

Taking down unserviceable main switch/DBs with MCBs, including making good to disterbed surfaces to match with existing specification complete all as specified and directed

M&L for single phase point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 Volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC conduit pipe or PVC Casing capping ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of suitable sizes of modular boxe and modular plates of suitable way mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 Volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling to match it as per the existing surface of wall/ceiling for one light point complete all as specified & directed by EIC

-Ditto- all as per ser item No 77 but one 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch complete, all as specified.

-Ditto- all as per ser item No 77 but size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 Volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system complete, all as specified .

S&F of modular type switch 5/6 Amps 220 Volts AC,one module, all as specified.

S&F of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular complete all as specified.

S&F of modular type switch of 15/16 Amps 220 Volts AC one module, all as specified.

S&F of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular complete, all as specified.

S&F track mounted 10 watt LED decorative light Black/White finish having modern design type angle adjustable spot light /Focus light fitting compact size with high power COB LED to provide focused light fixtures. Tack light to be attached anywhere on a continious track rail which is electrically charged as compared to the need of routing electrical wiring to individual light posotion for the following wattages including taking down of old fitting all as specified and directed.

-Ditto- all as per item er No 84 here-in-beofe but 15 Watt LED decorative light

-Ditto- all as per item ser No 84 here-in-beofe but 25 Watt LED decorative light.

-Ditto- all as per item ser No 84 here-in-before but 30 Watt decorative light

S&F track rail made of aluminium housing suitable for fixing of track light of any wattage of 1 meter lenth as per track light colour white/Black, including fixiing accesories complete, all as specified and directed.

S&F track rail made of aluminium housing suitable for track light of any wattage of 2 meter lenth as per track light colour white/Black including fixiing accesories complete, all as specified and directed.

S&F track light accessories (connector) suitable for fixing of track light complete, all as specified and directed.

S&F track light accessories (connector) of size flat shape suitable for fixing of track light complete, all as specified and directed.

S&F track light accessories (connector) of size flat L shape suitable for fixing of track light complete, all as specified and directed.

S&F track light accessories (connector) of size flat T shape suitable for fixing of track light complete, all as specified and directed.

S&F track light accessories (connector) of size flat X shape suitable for fixing of track light complete, all as specified and directed.

S&F track light accessories adjusable suspension kit suitable for fixing of track light complete, all as specified and directed.

S&F recessed/ceiling concealed mounted down lighter light fitting used in both warm/white type colour of round/Square flate shapes decorative type with high efficiency PMMA diffuser soft glare free light with drivers & LED luminaire of rating capacity in 5 Watt to 7 Watt 220 Volt AC complete light fitting fixed inside the glass cabin including making /cutting the hole in upside/inside of glass / wood as per entire direction by engineer in-charge and also providing of suitable type of flate fexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed. Note : if any damages found during the light fitting fixing and making hole in glass cabin contractor will responsible for repair/ renewal of cabin without any extra cost, all as specified.

S & F in renewal energy saving long life recessed/celling conceled/surface mounted flat unique square slim/Ultra slim panel (as per site requirement) integrated design LED luminire light panel type fitting of size 2 X 2 feet of type of rating wattage capacity 36W/40W of supply voltage 220 AC decorative type with high performance LEDs and electronic driver with extruded body made of aluminium housing with mounting slot and fully diffused recessed mounted LED luminire high quality with surge protection energy efficient for ready to use and required in Warm type colour fixture complete including making suitable type of size hole/Square type wooden frame work on ceiling surface or in additional of extra cutting of existing hole side work(if required at site) for fixing of light fitting purposed and also providing suitable type flat flexible three core cable for electric connection purposed complete all as specified and directed.

S&F of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable of size/type for vertical type distribution board vertical loadline type of rating VTPN 4 way type 415 Volt 3 phase AC supply holding system with IP protection rating with ISI marked and having fitted neutral and earth link bus bar and mounting base chanels and blanking plates suitable for holding of main MCCB as incommer and out going MCB complete system alongwith providing and mounting in side of DB box of 01 No of MCCB TPN 160 Amps with breaking rupting capacity 25 KA and having adjustable setting type and also providing of 12 Nos of MCB SP 63 Amps 10KA 'C' curve type of the same manufacture make as per of distribution board make complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs complete all as specified and directed by EIC.

S&F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangment system suitable of rating of size/type of distribution board SPN 12 way type 220 Volt AC supply system with IP-43 protection system and having mounting chanel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and duly fixed surface on wall or conceled in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as specified and directed.

S&F of MCB SPN 40 to 63 Amps with breaking capacity 10KA 'C' curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified.

S&F MCB SP 40 to 63 Amps with breaking capacity 10KA 'C' curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified.

S&F MCB SP 06 to 32 Amps with breaking capacity 10KA 'C' curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring coneenection complete including taking down of old MCB complete all as specified.

S&F in renewal of LED street light fitting fixed in building of rated capacity 25 Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protectiuon suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket 25 mm and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.0 mtr long and make to shape / bend of 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos of MS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed.

S&F sub main wiring system with two runs PVC insulated FRLS wire,1100 Volt grade with multistranded copper conductor wire of size 2 run of 10 Sqmm and 1 run of 16 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface complete all as specified and directed . Note:- 3 runs of 10 sqmm wire and one run of PVC casing capping/conduit shall be measured as 1.0 RM.

Supply, laying and testing of LT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volt grade cross sectional area of size 35 sqmm 3.5 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed by Engineer-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick each layer compete all as specified and directed by Engineer-in-Charge.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified.

S&F old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge.

M&L for earthing work complete with galvanised steel earth plate electrode 60 cm X 60 cm and 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil all as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of 20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC 1:2:4 type B-1 (using 20mm graded of stone aggregate) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work all as specified and directed . .

M/S Tajamul Ah Buchh (BID ID -3441392)

M/S RATHER CONSTRUCTION CO (BID ID -3447593)