(Nigam Nidhi) Renovation and Water Harwesting Work At 50 Quarter Ward No.12. Zone No.05.File No.04/26X3/3.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil

Loading and unloading of stone boulder / stone aggregates / sand/ kanker/ moorum. (Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : With 40mm nominal size graded stone aggregate. PCC Grade M 7.5

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : With 40mm nominal size graded stone aggregate. PCC Grade M 7.5

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor two level excluding cost of centering, shuttering, finishing and reinforcement Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor two level excluding cost of centering, shuttering, finishing and reinforcement Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.

Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process,crushing strength not less than 40kg /sqcm and water absorption not more than 15% in foundation and plinth.Cement mortar 1:6 (1 cement : 6 coarse sand

Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process,crushing strength not less than 40kg /sqcm and water absorption not more than 15% in foundation and plinth.Cement mortar 1:6 (1 cement : 6 coarse sand

62 mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete grade M-15 (Nominal Mix with 20mm maximum size of stone aggregate) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume. Hardening compound is mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine ith strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of stone dust sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge

12 mm cement plaster of mix: 1:6 (1 cement: 6 sand)

Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with any section made of 1.60mm or 1.25mm thick M.S. Sheet, joints mitred and welded and grinded finish with profiles required size with 15x3mm lugs 10cm long embedded in cement concrete M-10 (Nominal Mix with 20mm maximum size of stone aggregate) blocks 5x10x10cm or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primers.

Providing and placing on terrace at all floor polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 25 mm nominal outer dia .Pipes

Providing and fixing white vitreous china water closet squatting pan (Indian type) P or S trap, complete including cutting and making good the walls and floors wherever required Orissa pattern W.C. pan of size 580x440 mm

Providing & fixing water taps Stainless Steel 15mm dia

Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete.Moorum/Hard copra

Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for Columns, Pillars, Piers, Abutments, Posts and Struts.

Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed

Loading and unloading of stone boulder / stone aggregates / sand / kanker / moorum. (Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip) For a lead upto 5 Km.

Providing and laying filter material as given below in recharge pit/ percolation pit or soak pit/ waste water treatment system. Course Sand (1.5 mm to 2.00 mm)

Providing and laying filter material as given below in recharge pit/ percolation pit or soak pit/ waste water treatment system. Gravel/Pebbles (5 to 25 mm)

Brick bats

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate

Drilling of perfectly vertical bore hole of a diameter suitable to receive 200mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 200mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. 2 No. Borbel in all types of rocks.

Brick work with well burnt chimney bricks in bulls patent trench kiln,crushing strength not less than 25kg /sqcm and water absorption not more than 20% in foundation and plinth

I.S.I. marked UPVC casing pipe confirming to IS 4985/1988 (with up-to-date amendments) Screen pipes with ribs 100mm dia

I.S.I. marked UPVC casing pipe confirming to IS 4985/1988 (with up-to-date amendments) Screen pipes with ribs 200mm dia