3rd CALL SPL REPAIR TO BLDG NO P-443 (SERVANT QTRS OF 22 GRENADIER, REWIRING IN BLDG NO T-110 AND ADDITIONAL ELECTRIC FITTINGS IN DENTAL SECTION OF HQ 350 INF BDE AND CERTAIN LBW AND REV WORKS IN THE AOR OF AGE BR-II UNDER GE (WEST) JALANDHAR CANTT

Amount

Schedule 'A' Part-I (B/R Works)

Surface dressing n. exc. 15cm deep and averaging 15cm deep in soft/loose soil complete all as specified and as directed.

Surface excavation n. exc. 30cm deep and averaging 15cm deep in soft/loose soil complete all as specified and as directed.

Excavation in post holes (or similar holes) in soft/loose soil each n. exc. 0.5Cum, getting out, returning, filling in, and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to adistance n. exc. 50m and making good the disturbed surface complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and n. exc. 1.5m in depth for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, including, spreading, leveling and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance n exc 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Approved earth/Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed to a true surface including watering complete all as specified and as directed.

Material and labour for 40-50mm thick sand filling under floors or in foundation including consolidation with plate vibrator before and after laying paver blocks etc complete all as specified and as directed.

Material and labour for hard core of broken stone or boulders gauge exceeding 63mm but not exceeding 100 mm deposited, spread and leveled in layers not exc.15 cms thick, each layer watered and rammed to a true surfaces complete all as specified and as directed.

Material and labour for cement concrete 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in sub base/foundation filling/mass concrete/sunken floor etc, complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description in any position not otherwise specifically provided for (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (Unreinforced) of any description in ground floor and paving not exceeding 15 cm in thickness (below or above ground level) and removal surplus spoil out of defence land where directed at a level n. exc 1.5 metre above the starting point complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:2:4 type B-1 (20mm graded graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Material and labour for reinforced cement concrete1:2:4 type B-1 (20mm graded graded stone aggregate) as in column, piers, posts and struts complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:2:4 type B-1 (20mm graded graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:2:4 type B-1 (20mm graded graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and as directed.

Material and labour for reinforced cement concrete 1:1.5:3 type B-1 (20mm graded graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directedand the like complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, walls and parapet walls etc complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:6 (but except bricks) complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or corvered on plan exc. 6.0m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surface fair finished complete all as specified and as directed.

Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions surface fair finished complete all as specified and as directed.

Material and labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves, landing and similar work not exceeding 200mm thick (horizontal or sloping) and to edges of concrete surface fair finished complete all as specified and as directed.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.surface fair finished complete all as specified and as directed.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide surface fair finished complete all as specified and as directed.

Material & labour for repairing of RCC projections, chajjas, roofs, facia etc. in patches not exceeding 3 Sqm in each patch by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor complete all as specified and as directed.

Supply and fixing 2mm thick fibre glass reinforced translucent corrugated sheeting with one and half corrugations side lap fixed with coach screw and washer in wall and with L-type or J-type or cranked hook bolts in roof, complete all as specified and as directed.

Material and labour for 50mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection and path finishing, joints filled with bitumen and sand mixer 50mm thick, finished the surface even and fair without using extra cement complete all as specified and as directed.

Material and labour for 75mm thick plain cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub-base for floors, surface finished even and rough to receive top finish complete all as specified and as directed.

Material and labour for 100mm thick plain cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub-base for floors, surface finished even and rough to receive top finish complete all as specified and as directed.

Material and labour for 60 mm thick, machine pressed precast conctete (white) interlocking paver block M-35 grade, any shape and size, conforming to IS 15658-2006, with grey cement and no pigment, complete all as specified and as directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish outside defence land complete all as specified and as directed.

Material and labour for 25mm thick cement concrete 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate as in levelling course, surface finished rough to receive topping floor/tiles complete all as specified and directed.

Material and labour for 15-16mm thick machine cut udaipur stone any colour jointed with neat cement slurry mixed with pigment to match with colour and shade of sone including cutting, polishing and making hole in stone slab for gas pipe over and including cement screed bed 15mm thick in cement mortar (1:6), set and jointed in neat cement slurry including pointing in white cement (1:2) with admixture of pigment, including chamfering the corners complete all as specified and as directed.

Material and labour for non-skid joint free ceramic coloured tiles, 7-8mm thick (Square/rectangular), area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm; as in floors etc, set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed.

Material and labour for non-skid joint free ceramic coloured tiles, 7-8mm thick (Square/rectangular), area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm; as in dado/skirting etc, set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over and including 10mm thick backing layer of cement mortar (1:4) complete all as specified and as directed.

Material and labour for non-skid joint free ceramic coloured tiles, size 300x300mm & 7-8mm thick (Square/rectangular), area of each tile not exceeding 0.11 Sqm; as in floors etc, set and jointed in neat cement slurry and pointing in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles, size 300mm x 200mm x 6-7mm thick as on vertical surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointing in white cement with pigment to match the surface over and including 10 mm thick rendering or backing layer of cement mortar (1:4) complete all as specified and as directed.

Material and labour for chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointing in white cement with pigment to match complete all as specified and directed.

Material and labour for machine cut kota stone 18-20mm thick in single piece in tread and landing of stair case including bull nose edge etc. over and including 15mm thick screed or bedding layer of cement sand mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all specified and as directed.

Material and labour for machine cut kota stone 18-20mm thick in skirting/dado/riser of steps etc. over and including 15 mm thick rendering or backing layer of cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.

Taking down cement plaster of any description on brick or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:6 on other than fair faces of concrete on roof surfaces finished even and smooth without using extra cement complete all specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement with integral water proofing compound @ 3% percent by weight of cement complete all specified and as directed.

Material and labour for 5mm thick rendering in cement mortar 1:3 on brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all specified and as directed.

Supply only integral water proofing compound @ 3% percent by weight of cement complete all as specified and as directed.

Supply and fixing mild steel such as grills gratings, etc. with ends of bars shouldered and/or or forged into spikes; framed riveted,guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 and similar works including one shop coat of zinc chromate primer and cutting holes/making surface good in cement concrete 1:2:4 type B-0 complete all as specified and as directed.

Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde- E- 250) quality complete all as specified and as directed.

Material and labour for mild steel high yield strength TMT bars 10mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Material and labour for mild steel high yield strength TMT bars 5mm dia and over upto 10mm dia cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Material and labour for mild steel high yield strength round bars 10mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding complete all as specified and as directed.

Material and labour for mild steel work deformed bars 5mm dia and over upto and including 10mm dia for stirrups spacers and binder, cut to length, bent to shape required including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed not less than 0.9mm dia or securing with clips quality conforming to Fe-410 complete all as specified and as directed.

Material and labour for mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, diameter of neck not exc 12mm and 30cm long complete all as specified and as directed.

Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply and fixing chain link fencing 10 gauge galvanised steel wire and of mesh size 50mmx50mm including line wires, binding and fixed to steel fencing post nuts and bolts, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Material and labour for concertina coil on vertical double norn fencing not less than 610mm dia complete all as specified and as directed.

Supply and fixing mild steel galvanised 2strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (each line of wire to be measured)

Dismantling brick tiles or tile terracing tiles, single layer on roof including plaster complete all as specified and as directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed.

Material and labour for 40 mm thick plain cement concrete 1:2:4 type B-1 as roof padding concrete to bring the existing slab in slope of 1:40 complete all as specified and as directed.

Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all specified and as directed.

Material and labour for cleaning top surface cement concrete roof by wire brushing and applying 15mm thick cement sand mortar 1:3 on roof surface complete all specified and as directed.

Material and labour for priming the roof surface with a coat of hot blown bitumen of grade 85/25 @ 1.2 Kg/Sqm complete all as specified and as directed.

Material and labour for 3mm thick APP based polymeric membrane weighing not less than 3kg/Sqm reinforced with polyester non woven fabric (wt not less than 150 gram/Sqm) laid over bitumen surface including preparation of surface by cleaning thoroughly to achieve a smooth surface complete all as specified and as directed.

Material and labour for 40 mm thick brick tiles laid on mud mortar and joints grouted and pointed flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and as directed.

Material and labour for 40 mm thick brick tiles laid on mud mortar and joints grouted and pointed flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska but except brick tiles. (Old serviceable brick tiles shall be re-used). Quoted rate shall be deemed to be included the cost of cleaning and washing of serviceable bricks tiles) complete all as specified and as directed.

Material and labour for flush pointing to brick laid flat or brick tiles in paving cement mortar in 1:3 complete all as specified and as directed.

Taking down chowkhat or frames with shutter not exceeding 1.5sqm each with shutters (without taking off shutters from the frames) and removing to or from store complete all as specified and as directed.

Taking down chowkhat or frames with shutter exceeding 1.5 sqm not exceeding 4.0sqm each with shutters (without taking off shutters from the frames) and removing to or from store complete all as specified and as directed.

Supply and fixing PVC solid door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per specification mentioned in preambles of section-8 and drawing shown in SSR Part-II (2010) and complete all as specified and as directed.

Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification mentioned in preambles of section-8 and drawing shown in SSR Part-II (2010) and complete all as specified and as directed.

Supply and fixing solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification mentioned in preambles of section-8 and drawing shown in SSR Part-II (2010) and complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

Supply and fixing 35mm thick 2nd class hard wood factory made glazed and skelton door shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain fitted with cut and mitered beads for securing glass gauze etc the size of members as per section 8 clause 8.24(a) of SSR Part-I complete all as specified and as directed.

Supply and fixing 35mm thick 2nd class hard wood factory made plain framed panelled shutter (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated complete all as specified and as directed.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60x25mmsingle rebated comprises gauged Skelton shutter ERW sec 50x20mm and 1mm thick with two open able leaf consisting two Nos sash bars of T section 20x3mm completed welded to frame with one vertical mullion of ERW box type T section of size 60x25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC 1:2:4 type B1 four Nos for each window incl following fittings weld to frame shutter (a) hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100mm long 01 Nos per leaf (c) MS Tower bolt 150mm long of 12x3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100 long stoper-01 No per leaf () MS pintal of hinges of size 75mmx12mm-02 Nos per leaf (g) fabrication & fixing arrangement as per Drg No. CEJZ/TD-06-07 . Note : wire mesh and painting shall be measured and paid separately under appropriate item complete all as specified and directed

All as per description of item No 84 above but with glazed shutter complete all as specified and directed

Supply and fixing 4mm thick size 600x600mm HPSC (High pressure steam cured) pre-primered self embossed, textured designerd board E- board classic to be fixed on including GI powder coated grid /section size 600x600mm with main runner 38x24x0.9mm thick, cross tee 28.6x24x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm c/c both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including provision for light fixtures of any sizecomplete all as specified and as directed.

Supply and fixing galvanized mild steel wire cloth 0.56mm nominal dia and average width of aperture 1.18mm and fixed with tinned tacks or galvanised steel staples complete all as specified and as directed.

Supply and fixing sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fixing extruded aluminium alloy handles, 150mm size, fabricated type, anodised complete all as specified and directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolt, of extruded section, with bright bolt and fixed complete all as specified.

Supply and fixing butt hinges, 100mm long, extruded aluminium alloy with galvanized mild steel hinge plate complete all as specified and as directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 150mm long complete all as specified and as directed.

Cutting chases, pinning in, making good to facing where reqd and pointing in cement mortar 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth complete all as specified and as directed.

Supply, laying, jointing and testing 15mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wall complete all as specified and as directed.

Supply, laying, jointing and testing 20mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through wall complete all as specified and as directed.

Supply and fixing in repair sink with drainage board made out of stainless steel sheet 1mm thick (kitchen or laboratory) with pIngs, washers and wastes; including bedding in cement mortar in dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mmx 330mmx 160mm complete all as specified and as directed.

Supply and fixing in repair 15mm bore bib tap with long body chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing 20mm size ball valve PTMT with epoxy coated aluminium rod and high density plastic ball ( Minimum weight 210grams) screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply and fixing 15mm dia pillar taps cast fancy type (Hot and Cold) copper alloy with capstan heads cromium plated screwed down high pressure with long screwed shanks and fly screwed for iron pipes complete all as specified.

Supply and fixing in repair 15mm bore stop valve/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply and fixing 20mm bore stop valve/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply, hoist and fixing in position, 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including supply and fixing 20mm dia, 450mm long GI washout pipe (medium grade) with plug and 20mm dia, 600mm long overflow GI pipe (medium grade) with all fittings including dismantling the existing tank complete all as specified and as directed.

Supply and fixing in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed.

Supply and fixing Soap dish stainless steel chromium plated fixed to walls with chromium plated brass screws complete all as specified and as directed.

Supply and fixing acrylic corner set of three pieces as per sample approved by Engineer-in-charge complete all as specified and as directed.

Supply and fixing stainless steel plate rack of superior quality of size 36" x 24" weight not less than 8 kg complete all as specified and as directed.

Supply and fixing vitreous china wash hand basin white flat back, size 550mm x 400mm, on and including cast iron cantilever brackets, cutting for and pinning in ends of brackets including waste pipe 32mm dia PVC, waste chain and plug and porcelain stopper, fixing of pillar tap, brass coupling 32mm bore chromium plated, restoring all connections complete all as specified and as directed.

Supply and fixing in repair Orissa pattern squatting pan with integral foot rest, vitreous china white of size 580mm x 440mm including making connection to trap, flush pipe, antisyphonic pipe (but excluding flushing pipe and flushing cistern), provision of lime concrete bedding etc and making good the floor surface complete all as specified and directed.

Supply and fixing in repair 10 litres capacity PVC valveless syphonic action type, low level flushing cistern ISI Marked white with inlet, ball valve, float and handle including brackets fixed complete all as specified and as directed.

Supply and fixing in repair brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges fixed with brass chromium plated screws complete all as specified and as directed.

Supply and fixing acrylic shelf 450mm long and 125mm wide over WHB of approved quality as per sample approved complete all as specified and as directed.

Supply and fixing grating chromium plated 150mm dia with centre hole fixed in cement mortar 1:3 complete all as specified and as directed.

Supply and fixing in repair 450mm long PVC connection fiber reinforced, for Hot/Cold water 15mm size with PTMT nuts and washer on both ends complete all as specified and as directed.

Supply and fixing peg set of six of stainless steel of approved quality as per sample approved complete all as specified and as directed.

Supply and fixing in repair 25mm dia mild steel pipe curtain rod, powder coated fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified includng fixing of long size rawl plugs in wall for MS hook, complete all as specified and as directed.

Dismantling of 75mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from floors or walls complete all as specified and as directed.

Dismantling of 100mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out from floors or walls complete all as specified and as directed.

Supply and fixing 75 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed in walls complete all as specifid and as directed.

Supply and fixing 100 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed in walls complete all as specifid and as directed.

Supply and fixing 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber joints laid in trenches or fixed in walls complete all as specified and as directed.

Supply and fixing 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Supply and fixing 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

Supply and fixing cast iron 'P' or 'S' trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate) diameter of outlet 100mm complete all as specified and as directed.

Supply and fixing cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate) diameter of outlet 75mm complete all as specified and as directed.

Supply and fixing 110mm bore PVC (SWR) single 'T' , Equal & unequal complete all as specified and as directed.

Supply and fixing 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fixing 150mm dia cast iron gully trap, with grating including jointing to waste pipewith lead joint complete all as specified and as directed.

Supply and fixing stack clamps out of 25mm by 3 mm flat iron and 8mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia pipe complete all as specified and as directed.

Material and labour for for providing lead joints for 75mm bore pipe in lieu of cement joints for pipes embedded in masonry or concrete complete all as specified and as directed.

Material and labour for for providing lead joints for 100mm bore pipe in lieu of cement joints for pipes embedded in masonry or concrete complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of ceiling including pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash etc complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and directed.

Material & labour for applying two coats of SHALIMAR SUPERCRETE/ NITOBOND water proofing coating on the entire surface of sunken portion complete all as specified and as directed.

Material & labour for 15mm thick cement screed in cement mortar 1:3 admixed with integrated water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper white or tinted over a coat of birla white putty complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper white or tinted over a coat of birla white putty complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and directed.

Material and labour for preparation of new or previously untreated wooden surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Schedule 'A' Part-II (Internal electrification)

Taking down carefully aluminum point wiring light /fan /light socket /power with fitting such as ceiling rose, air condition socket, Pendent, regulator, light fitting, street light etc which are not required for use and removing the material from site and making good the surfaces of walls ceiling etc all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Taking down sub main wiring of two single core PVC cable PVC insulated 6/4 sqmm size cable including conduit or wooden batten and removing the material from site and making good the surfaces of walls, ceiling etc all as per existing including white washing, painting all as per existing complete all as specified and as directed.

Taking out unserviceable main switch/DB's acomplete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one light /call bell/fan point controlled by one, one way switch complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one three pin socket outlet 5 Amps on same board with other switches complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one three pin socket outlet 5 Amps on independent board complete all as specified and as directed.

Material and labour for concealed point wiring with 2.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 2.5 Sq.mm size in green colour, for one six pin socket outlet 15 Amps on independent board complete all as specified and as directed.

Material and labour for concealed point wiring with 1.5 Sq.mm (nominal area) single core PVC insulated and unsheathed, FRLS cable, multi-stranded, copper conductor cable 650/1100 Volts grade with universal colour code (Phase & Neutral), in and including PVC concealed conduit medium grade (ISI marked) with accesories like bends, tee junction boxes etc. with sunk pressed steel terminal boxes and providing 3mm thick bakelite sheet top cover including earth wire of PVC insulated FRLS cable, copper conductor multi-stranded, 1.5 Sq.mm size in green colour, for one two way switch controlled by two switchs complete all as specified and as directed.

Supply and fixing switch piano flush button type, 5 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing socket combination, outlet multi purpose universal type, 15 Amps, AC, 6 pin, single pole, one way, 230/250 Volts (ISI Marked) complete all as specified

Supply and fixing switch piano flush button type, 15 Amps, AC, single pole, one way, 230 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing socket outlet multi purpose flush type 5 Amps, AC, 5 pin, single pole, one way, 230/250 Volts (ISI Marked) complete all as specified and as directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm having 3 terminals, PVC polycarbonate, isolated body complete all as specified and as directed.

Supply and fixing in repair modular switch 1way single pole, 6Amps, 1module complete all as specified and as directed. Make:- Roma or equivalent

Supply and fixing in repair modular switch 1way single pole, 16Amps, 1module complete all as specified and as directed. Make:- Roma or equivalent

Supply and fixing in repair modular bell push 1way single pole, 6Amps, 1module complete all as specified and as directed. Make:- Roma or equivalent

Supply and fixing modular socket outlet multi purpose, 6Amp - 2/3 pin combined 2 module, AC, 3pin and 2pin, single pole, one way, 230/250 Volts (ISI Marked) round and flat complete all as specified and as directed. Make:- Roma or equivalent

Supply and fixing modular socket outlet multi purpose, 6/16Amp - 2/3 pin combined 2 module, AC, 5 pin, single pole, one way, 230/250 Volts (ISI Marked) round and flat complete all as specified and as directed. Make:- Roma or equivalent

Supply and fixing electric bell, AC, 230 volts, single pole complete all as specified and as directed.

Supply and fixing galvanised sheet metal enclosures/termination box 18way with module plates suitable for Roma switche and sockets, concealed including cutting chases and making good the disturbed portion/surface complete all as specified and as directed.

Supply and fixing galvanised sheet metal enclosures/termination box 8way with module plates suitable for Roma switches and sockets, concealed including cutting chases and making good the disturbed portion/surface complete all as specified and as directed.

Supply and fixing galvanised sheet metal enclosures/termination box 6way with module plates suitable for Roma switches and sockets, concealed including cutting chases and making good the disturbed portion/surface complete all as specified and as directed.

Supply and fixing galvanised sheet metal enclosures/termination box 4way with module plates suitable for Roma switches and sockets, concealed including cutting chases and making good the disturbed portion/surface complete all as specified and as directed.

Supply and fixing galvanised sheet metal enclosures/termination box 3way with module plates suitable for Roma switches and sockets, concealed including cutting chases and making good the disturbed portion/surface complete all as specified and as directed.

Supply and fixing galvanised sheet metal enclosures/termination box 2/1way with module plates suitable for Roma switches and sockets, concealed including cutting chases and making good the disturbed portion/surface complete all as specified and as directed.

Supply and fixing lamp holder, PVC/ Polycarbonate type Glove insulated body with back plate suitable for batten fittings with back plate complete all as specified and as directed.

Supply and fixing lamp holder, PVC/ Polycarbonate type Glove insulated body with back plate suitable for batten fittings including 12watts spiral type LED bulb and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Supply and fixing sheet metal enclosures for MCB's, double door, distribution board single pole and neutral 4way, 240 Volts with 200Amps rated bus bar complete all as specified and as directed.

Supply and fixing sheet metal enclosures for MCB's, double door, distribution board single pole and neutral 8way, 240 Volts with 200Amps rated bus bar complete all as specified and as directed.

Supply and fixing sheet metal enclosures for MCB's, double door, distribution board triple pole and neutral 4way, 240 Volts with 200Amps rated bus bar complete all as specified and as directed.

Supply and fixing MCB's, single pole, 6 to 32 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing MCB's, single pole and neutral, 40 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing MCB's, single pole, 32 to 63 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing MCB's, triple pole and neutral, 63 Amps, 240 Volts complete all as specified and as directed.

Supply and fixing MCCB's, triple pole and neutral, 100 Amps, 415 Volts, 16KA breaking capacity complete all as specified and as directed.

Supply and fixing electronic fan regulator, step type, 230/250 Volts and connecting up, complete all as specified and as directed.

Supply and fixing modular electronic fan regulator, step type, 230/250 Volts, 120Watts, 2modules and connecting up, complete all as specified and as directed.

Supply and fixing 300mm sweep metal body heavy duty exhaust fan, AC single phase 230/240 volts with louvers/shutter with mounting brackets with suitable size of nuts, bolts, washers make opening in the wall of required size for fixing the exhaust fan and making good the disturbed wall/plastered surface and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 1.5Sqmm 3 core complete all as specified and as directed.

Supply and fixing 400mm sweep metal body heavy duty wall fan, AC single phase 230/240 volts with suitable size of nuts, bolts, washers and making good the disturbed wall/plastered surface and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 1.5Sqmm 3 core complete all as specified and as directed.

Supply and fixing LED batten light fitting (double side) 1X22Watts decorative ultra slim aluminium square profile LED light fixture retrofit with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI 6500K (white light) with LED rod 22Watts with fixtures box type and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Supply and fixing in replacement LED street light fitting 20Watts retrofit with and including LED lamp pressure dia cast aluminium IP66, 20watts with 2100 lumen output with internal surge protection device of 10KV, IK7 LED (SEOUL) with voltage band of 140-280V CRI 6500K (white light) and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Supply and fixing in replacement LED street light fitting 1X25Watts including lamp made of pressure die cast housed withtoughened glass and high power LED with secondary optics,aluminium IP66 protection, 6500K impact resistance of IK 07 & 10 KV(SEOUL) external surge protection device including necessary brackets, nuts, bolts and washer as required for fixing and making electrical connections to by using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Supply and fixing in replacement LED 2'x2' ceiling light fitting 34Watts, ultra moderen designed, LED luminaire which provides soft light and glare free symmetrical illumination suitable for arm strong/grid ceiling including fixing arrangements ie nuts, bolts and washers etc and making electrical connections to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75Sqmm 3 core complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate, electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5metres below normal ground level, connected and including GI earth lead wire 4mm dia connected to earth plate by means of nuts, bolts, check nuts and washers of galvanised iron or steel, GI earth wire protected by 15mm dia GI pipe 'light grade' upto 2 metre above ground level and connected to machinery earth plate surrounded by packed alternate layers of charcoal and common salt 15cm thick all around top and bottom and watering pipe 20mm bore GI light grade all as shown in electrical plate No 3 of SSR Part-I of 2009, testing on completion including providing PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick cover with RCC 1:2:4 type B-1 and 8mm dia TMT bars 100mm C/C bothway and frame including excavation earthwork and returning filling etc, complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit.

Supply and fixing sub main wiring with two single core PVC insulated unsheathed, FRLS multistranded copper conductor cable of size 4 sqmm and one single core PVC insulated unsheathed, FRLS multistranded copper conductor cable green colour of size 2.5 Sqmm as earth lead through and including 25mm dia PVC concealed conduit with fittings complete all as specified and as directed.

Supply and fixing sub main wiring with two single core PVC insulated unsheathed, FRLS multistranded copper conductor cable of size 6 sqmm and one single core PVC insulated unsheathed, FRLS multistranded copper conductor cable green colour of size 4 Sqmm as earth lead through and including 25mm dia PVC concealed conduit with fittings complete all as specified and as directed.

Supply and fixing weatherproof twin core PVC insulated unsheathed, FRLS multistranded aluminium conductor cable with suitable size of GI earth lead through and including 25mm dia PVC concealed conduit with fittings complete all as specified and as directed.

Taking down XLPE insulated, armoured screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of cross sectional area 25Sqmm, 3.5core complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and n. exc. 1.5m in depth for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes etc. and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, including, spreading, leveling and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance n exc 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply, fixing and laying GI tubing light grade 40 mm bore with all necessary fitting laid in trenches, under road crossing, in floors or fixed to poles/DB for cable protection etc complete all as specified and as directed.

Supply and laying XLPE insulated, armoured screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of cross sectional area 25Sqmm, 3.5core complete all as specified and as directed.

Material and labour for sand filling in trenches for cable cushioning 8cm below and 15cm above the cable and compaction complete all as specified and as directed.

Material and labour for sub class 'B' bricks laid in trenches for cable protection complete all as specified and as directed.

NATIONAL BUILDERS

ADITI CONSTRUCTION CO