PROVISION OF CHAIN LINK FENCING AROUND CG DISPERSAL ON 4.23 ACRE CG LAND AT BHUBANESWAR UNDER GE I CG BHUBANESWAR

Amount

Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) as in bed block of post, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

S&F mild steel angle iron/ flat iron/ round bar as in posts and struts in fencing including cutting tops to shpe as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S & F for Mild steel screw bolts of diameter of neck in 11-15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

S&F galvanised with PVC coated chain link fencing inter winded (low carbon steel wire heat treated zince coated (Zinc+PVC of diameter of GI wire consisting 2.50 mm and 1.5mm PVC coating over all 4.00 mm dia) and size of mesh 50x50 mm rust proof complete all as specified and directed

M & L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells,spits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for brick work with fly ash bricks, straight of curved on plan exc 6m mean radius, built in modular brick in cement mortar 1:4 complete all as specified and directed.

M & L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated material (soil) to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed.

Supply only 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, as in weep hole and making good complete all as specified and directed. ( rates for Making or leaving holes for fixing, pipes, bolts, etc. Include in RR masonery work as per SSR Pt -I)

M&L for rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick work or concrete surface finishing even and smooth without using extra cement complete all as specified and directed

M&L for preparation of surfaces plastered on unplastered of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide of new surface of steel complete all as specified and directed

M&L for two coats of synthetic ename paint over a coat of red oxide, n.exc 10 cm in width or girth of new surface of steel complete all as specified and directed.

M/S ABHISHEK JENA