Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹31.3 L+₹1.6 L (5.50%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹31.8 L+₹2.1 L (7.04%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹31.9 L+₹2.2 L (7.50%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹32.3 L+₹2.6 L (8.84%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
29 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-05/2023-2024 WELCOME MAINT IN MD ACCN FOR JCOS/ORS MD ACCN IN SECTOR D AND F UNDER AGE B/R I AT CHANDIMANDIR
2023_MES_593752_1
GE/CHM-05/2023-2024
Open Tender
Civil Works
Item Rate
270 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹90,000
Yes
17 Jun 2023
8 May 2023
5 Jun 2023
8 May 2023
29 May 2023
22 May 2023
Amount
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work at any height , complete all as specified and directed.
Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each, and removal from site complete all as specified & directed.
Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down chowkhats or frame exceeding 1.5 Square Metre but not exceeding 4 Square Metre each with shutter(s) (without taking off shutters from the frame), complete all as specified and directed.
Solid PVC frame (Single Rebated) of size 75mm x 50mm made out of solid PVC foam with homogenous fine cellular structure density 750 having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design ,solid PVC foam with homogenous fine cellular structure density 750 having smooth outer integral skin, supplying & fixing in frame at site complete all as specified and directed.
Factory made pressed steel frames of profile width 125mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate rebate including necessary fixing lugs, hinges, lock strike plate, etc, and back filled with PCC 1:3:6 type C-1 complete all as specified.
Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate rebate including necessary fixing lugs, hinges, lock strike plate, etc, and back filled with PCC 1:3:6 type C-1 complete all as specified.
30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge.
Factory made second class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed.
Glazed and gauged Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, complete all as specified & directed.
Steel window as in repair, box type, primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 14 hereinbefore but without glazing bar.
Steel ventilator factory made with top hung shutter including hinges, steel peg stay, fixed as in repair complete all as specified and directed.
Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples complete all as specified & directed.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Square Metre in each pane, complete all as specified and directed.
3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Square Metre in each pane, complete all as specified and directed.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Square Metre in each pane, fixed as in repairs, complete all as specified and directed.
Framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-310-O or Fe-410-O fixed as in repair complete all as specified and directed.
Extruded aluminium alloy handles, fabricated type, 150mm long , all as specified.
Supply and fix mild steel sliding door bolt 250mm long, clip and bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate including necessary welding, complete all as specified and directed.
200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.
Butt hinges, cold rolled steel medium weight 100mm long, fixed to chowkhats , complete all as specified & directed.
300mm mild steel ordinary rat tail rod pattern spring ,including roller and roller plate, fixed as in repairs, complete all as specified and directed.
Preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified & directed by Engineer-in-charge.
Preparing new or previously untreated wood and wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified & directed by Engineer-in-charge.
One coat of synthetic enameled paint on old wooden surfaces of any description ,including preparation of old surfaces , complete all as specified & directed.
Brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6, including dismantling old brick complete all as specified & directed.
Plain cement concrete 1:5:10, nominal mix, type E-2 using 40 mm graded stone aggregate as in sunken, foundation, filling and mass concrete, complete all as specified & directed.
Water proofing treatment to sunken portion and adjoining walls of kitchen, WC, Bath & Toilet, etc complete all as specified as under:- (a) 15 mm plaster in cement mortar (1:3) mixed with water proofing compound as per manufacturer’s instructions after roughning and cleaning the surface . (b) Applying cement slurry to the surface @ 0.488 kg /Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and allowing the surface to air cure for 4 hours. (c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and allowing the surface to air cure for 4 hours. (d) Curing the sunken portion with water minimum for 48 hours by ponding. (e)Applying 3mm thick APP membranne with bitumen by torch application to the treated sunken surface over a coat of primer as per manufacturers instructions. (f) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound .
Dismantling floor hearth or wall tilling including cement mortar bedding, complete as specified and directed.
Glazed ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 10mm thick rendering in cement mortar 1:4 , complete all as specified and directed.
Non skid, joint free first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 Square Metre but not exceeding 0.18 Square Metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6 , complete all as specified and directed.
Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 including dismantling of old tile and removal of debris complete all as specified and directed.
Baroda green marble 14 to 16mm thick, machine cut, laid over and including 10mm thick screed bed in cement mortar (1:4), bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and machine polishing (table rubbed and polished), as in kitchen platform, step, jambs, pillars and like, complete all as specified and directed.
Rendering 20mm thick plaster in cement mortar 1:4 mixed with WPC @ 3% on roof slab, finished even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
15mm thick rendering in Cement and Sand mortar 1:4 over concrete /brick surfaces finished even and smooth without using extra cement, including taking down old cement plaster and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.
15mm thick rendering in Cement and Sand mortar 1:6 over concrete /brick surfaces finished even and smooth without using extra cement, including taking down old cement plaster and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.
10mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces)finished fair and even without using extra cement, as in ceiling, chajjas, facias, at any position, including taking down old cement plaster & providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Preparation of new surfaces of any description of wall etc and applying two coats of oil bound distemper over one coat of interior wall primer including wall care putty (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed.
Preparation of old surfaces of walls and applying two coats of oil bound distemper, complete all as specified and directed
Preparation of old surfaces of walls and applying one coat of oil bound distemper, complete all as specified and directed
Complete removal of existing treatment on wall and preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Reinforced cement concrete (1:2:4), type B-1, using 20 mm graded crushed stone aggregates, a as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed complete all as specified and directed .
TMT bars for reinforcement, 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.
Solid PVC board 16-18mm thick, interior grade of any colour, fixed with screw in shelves or kitchen cupboards, shutters incl all connnected items in repair complete all as specified and directed.
Block board 19mm thick , interior grade commercial type, fixed with screws timber frame work as in cup board, kitchen cabinet, cupboard racks, wardrobe with an including 6mm thick IInd class hard wood edging on exposed edges, fixed as in repairs, complete all as specified and directed.
Continuous (piano) hinges, mild steel bright finish, width of flap 40mm when open, complete all as specified and directed.
PVC body magnetic shutter catcher for kitchen cup boards, fixed with standard steel screws, complete all as specified and directed.
Wash hand basin, vitreous china, flat back , white , of size 550X400mm, including waste coupling, angle brackets and PVC waste pipe, fixed as in repair, complete all as specified and directed.
Vitreous china, wash down water closet pan, white, pedestal pattern with PVC seat cover and chromium plated jet (excluding, flushing cistern and flush pipe), fixed as in repairs, complete all as specified and directed.
Vitreous china squatting pan “Orissa” pattern of size 580mm x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete, set with cement concrete, fixed as in repairs, complete all as specified & directed.
Bib taps brass, with wall flange, chromium plated, cast copper alloy fancy type, short body, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs, complete all as specified and directed.
Angular Stop valve chromium plated, cast copper alloy fancy type, screwed down high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs, complete all as specified and directed.
Central hole Basin Mixer, without popup waste system , cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed in repairs, complete all as specified and directed.
15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repair, complete all as specified and directed.
Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repairs, complete all as specified and directed
Cast copper alloy, chromium plated wall mixer , fancy type, suitable for 15mm bore pipe, fixed in repairs, complete all as specified and directed.
Bath mirror cabinet of size 622mm x 422mm fixed to wall with rawl plugs having arrangements to put inside toiletries, fixed as in repairs complete all as specified and directed.
Sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 914 x 460mm, bowl size 405x354x203mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repair complete all as specified and directed.
Plate rack made out of 1.00mm stainless steel sheet of size 900mmx 750mm x 250mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed.
Plate rack made out of 1.00mm stainless steel sheet of size 600mmx 750mm x250mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed.
Supply and fix sink mixer one hole with regular spout (wall mounted model) with 450 mm long braided hoses, chromium plated, cast copper alloy, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Hand jet chromium plated (health faucet with 01 m PVC pipe) for 15mm bore with fittings, fixed as in repairs complete all as specified and directed.
PVC valve less syphonic action flushing type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for English squat pattern WC, set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
PVC (SWR) pipe, Type 'B' 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair compelte all as specified and directed.
PVC (SWR) pipe, Type 'B' 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair compelte all as specified and directed.
75mm bore PVC (SWR) bends any radius complete all as specified and directed.
110mm bore PVC (SWR) bends any radius complete all as specified and directed.
Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, fixed as in repair complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, fixed as in reapir complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, ball valve, including dismantling of existing water tanks and removing from site complete all as specified and directed.
Stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 20mm bore iron pipe or for unions, fixed in repair complete all as specified & directed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.
Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.
PCC 1:2:4 type B-1 (using 20m graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, including demolition of exisiting PCC complete all as specified and directed.
Wire brushing and cleaning top surface, terracing or cement concrete, includng flashings and junction of parapets etc including 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid over a coat of oil bound bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc having 75mm side lap joint and 100m end lap joint after preparing the surface as per standard practice and as per manufacturer instructions including dismantling of existing felt /treatment, complete all as specified & directed.
Machine pressed precast cement concrete tiles 250mm x 250mm x 22mm thick laid over and including 15mm thick cement mortar 1:6, jointed and pointed flush in cement mortar 1:3 complete all as specified and directed
Applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.
Plain cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in roof kerbs or mud stops rounded or chamfered on edges, complete all as specified & directed.
Supply only Integral waterproofing compound, all as specified.
Material and labour 75mm thick PCC 1:4:8 type D-2 (using 40m graded crushed stone aggregate) as in sub base flooring, finished even and rough to receive top layer, all as specified and directed.
40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished even and fair including finishing surfaces by brooming, all as specified and directed.
Factory made, precast concrete, machine pressed, interlocking paver block any shape and size, conforming to IS 15658-2006, of 60mm thickness, M-35 Grade, with grey cement and pigment and including laid over 25mm thick sand cushioning, complete all as specified and directed. Notes: The shape/size / colour of paver blocks shall be as approved by the GE.
welding (spot or contious) in sufficient length of mild steel work for repair of door, window or mild steel gate with or without taking down of MS door, window shutters, hinge weding, stoper welding etc complete ll as specified and directed.
Repairs to leaking joints of CI pipes/ traps/ fittings etc after taking out old jointing material lead / cement, cleaning the joint thoroughly and filling new material lead / cement and sealing the joints with joint sealing compound (Dr Fixit or equivalent) and making the installation completely leak proof complete all as specified. Note : (i) The work pertains to the drain pipes/ fittings of the WC / bath of MAP quarters installed under side of the roofs. (ii) All the joints of pipes / traps / fittings of one WC / bath shall be measured as one unit and payment shall be made for each WC / bath as “Each Job”. (iii) The rates shall include for providing scaffolding etc as required.
B S FURNITURE
Dhingra Brothers
Modern Enterprises
Premier Constructions
M/s Om parkash
Gunjan and Gunjan Associates
Standard Const. Co.
dhiraaj construction company
RAJESH KUMAR
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .