Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹21.9 LAccepted-AOC | 1 | Accepted-AOC Accepted being L1 bidder | |
| 2 | 2₹23.9 L+₹2.0 L (9.28%)Rejected-Finance 26 740 35 KESARI HOUSE NEAR RICO INDUSTRIAL AREA DEVIPURA SIKAR RAJASTHAN 332 001 | SIKAR | SIKAR | RAJASTHAN | 332001 | 2 | Rejected-Finance Not Being L1 bidder | |
| 3 | 3₹30.7 L+₹8.9 L (40.6%)Rejected-Finance | 3 | Rejected-Finance Not Being L1 bidder | |
| 4 | 4₹46.6 L+₹24.8 L (113.3%)Rejected-Finance 30 M A ROAD M A ROAD PHOENIX BAY SOUTH ANDAMAN ANDAMAN NICOBAR 744102 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744102 | 4 | Rejected-Finance Not Being L1 bidder |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
13 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Pankaj Vyas, IDSE, Commander Works Engineer
Commander Works Engineers No. 2, Brichgunj, Port Blair - 744 103
Provision of HT, 11 KV RMU at Likabali Auditorium at Brichgunj Military Station, Port Blair
2023_MES_623486_1
80300 / E8
Open Tender
Electrical and Maintenance Works
Item Rate
120 days
Port Blair
Class E
Category b ii
9 documents required · 9 mandatory
₹500
Garrison Engineer Brichgunj
₹44,000
Yes
29 Feb 2024
16 Oct 2023
20 Nov 2023
16 Oct 2023
13 Nov 2023
30 Oct 2023
16 Oct 2023 - 23 Oct 2023
Amount
M & L for Cable End Termination Joint, Heat Shrinkable type, Indoor type, suitable for 11 kV Grade, 3 Core, 95 Sq.mm, HT, XLPE Insulated, Armoured Power Cable with Aluminium Conductor and testing after jointing complete all as specified and as directed.
Supplying, laying and testing HT UG Cable, XLPE insulated, screened insulated, steel strip armoured and pressure extruded PVC bedded, 11000 Volts grade [heavy duty] suitable for Earthed System with aluminium conductor of size 3 Core, 95 Sq.mm conforming to IS – 7098 [Part – II] laid in trenches, fixed to walls or passing through pipes and connecting up complete all as specified and as directed.
M & L for Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep in Soft / Loose soil for laying Pipes / Cables etc. complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.
Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m complete all as specified and as directed.
Supply and laying of DWC [Double Wall Corrugated] HDPE Pipe and including fittings such as couplers, bends, end caps etc., ISI marked of Outer dia of 120mm and Inner dia 103.5mm polyethylene with smooth internal and profiled external surface for non pressure under ground cable complete all as specified.
Supplying and laying GI pipe, 150mm dia, Light grade for cable protection at road crossing etc. or fixing on wall / poles of any type, secured with clamps complete all as specified and as directed.
Supply, install, testing & commissioning of Factory Made, Outdoor type, Floor mounted 11 kV, 3 Phase, 3 Wire, 50 Hz, 630 Amps, 21 kA for 3 Seconds, SF6 Insulated, 3 Way RMU including Motorised Spring Charge Mechanism for ON / OFF the Breaker and option for Manual Spring Charging, Extendable on Both Sides with One Bus Coupler and Comprising of 01 Nos of 12 kV, 630 Amps, SF6 Insulated Load Break Switches [Incoming] and 02 Nos, 11 kV, 630 Amps, SF6 Insulated Load Break Switches [Outgoing] suitable for installations in 11 kV, 3 Phase, 3 Wire, 50 Hz effectively earthed system, including independent manual charged spring mechanism and fully rated earth switch with provision for earth and testing of cable including Air Insulated Cable Boxes with gland plates suitable for bottom entry 3 Core, XLPE, 11 kV, underground cable up to 120 Sq.mm with provision for earthing of cable including set of hooks for lifting during installation, both incoming VCB shall be consisting of Ammeter, Voltmeter, PF Meter, Frequency Meter with suitable capacity of CTs & PTs, Numeric Relay suitable for Earth Fault, Over Current, Short Circuit Current etc. complete all as specified and as directed and shall conform the following: Make: BHEL / ABB / Siemens / Andrew Yule / Schneider / Crompton Greaves / Alsthom / L & T
Supply, install, testing & commissioning of Factory Made, Outdoor type, Floor mounted 11 kV, 3 Phase, 3 Wire, 50 Hz, 630 Amps, 21 kA for 3 Seconds, SF6 Insulated, 1 Way RMU including Motorised Spring Charge Mechanism for ON / OFF the Breaker and option for Manual Spring Charging, Extendable on One Side with One Bus Coupler and Comprising of 01 Nos of 11 kV, 630 Amps, SF6 Insulated Load Break Switches suitable for installations in 11 kV, 3 Phase, 3 Wire, 50 Hz effectively earthed system, including independent manual charged spring mechanism and fully rated earth switch with provision for earth and testing of cable including Air Insulated Cable Boxes with gland plates suitable for bottom entry 3 Core, XLPE, 11 kV, underground cable up to 120 Sq.mm with provision for earthing of cable including set of hooks for lifting during installation, both incoming VCB shall be consisting of Ammeter, Voltmeter, PF Meter, Frequency Meter with suitable capacity of CTs & PTs, Numeric Relay suitable for Earth Fault, Over Current, Short Circuit Current etc. complete all as specified and as directed and shall conform the following: Make: BHEL / ABB / Siemens / Andrew Yule / Schneider / Crompton Greaves / Alsthom / L & T
Supply, install, testing & commissioning of Factory Made, Outdoor type, Floor mounted 11 kV, 3 Phase, 3 Wire, 50 Hz, 630 Amps, 21 kA for 3 Seconds, SF6 Insulated, 2 Way RMU including Motorised Spring Charge Mechanism for ON / OFF the Breaker and option for Manual Spring Charging, Extendable on Both Sides with One Bus Coupler and Comprising of 01 Nos of 12 kV, 630 Amps, SF6 Insulated Load Break Switches [Incoming] and 01 Nos, 11 kV, 630 Amps, SF6 Insulated Load Break Switches [Outgoing] suitable for installations in 11 kV, 3 Phase, 3 Wire, 50 Hz effectively earthed system, including independent manual charged spring mechanism and fully rated earth switch with provision for earth and testing of cable including Air Insulated Cable Boxes with gland plates suitable for bottom entry 3 Core, XLPE, 11 kV, underground cable up to 120 Sq.mm with provision for earthing of cable including set of hooks for lifting during installation, both incoming VCB shall be consisting of Ammeter, Voltmeter, PF Meter, Frequency Meter with suitable capacity of CTs & PTs, Numeric Relay suitable for Earth Fault, Over Current, Short Circuit Current etc. complete all as specified and as directed and shall conform the following: Make: BHEL / ABB / Siemens / Andrew Yule / Schneider / Crompton Greaves / Alsthom / L & T
Note for Serial Item No. 9, 10 & 11: RMU shall be 11 KV, 630 Amps, 21 kA for 3 Seconds, SF6 Insulated, Manual / Motorised, Outdoor, Extensible type with Air Insulated Bus Connected Metering unit, Type tested in line with latest IEC Standards, suitable for operations near coastal area and at 40ºC Ambient Temperature without any de-rating, Switchgear and Busbar shall all be contained in a Stainless Steel Enclosure [Minimum 2mm thick AISI 441 Grade] filled with SF6 at 0.3 Bar [300 hPa] Relative Pressure, RMU Tank shall provide Full Insulation and Switchgear shall be insensitive to the environment with Degree of Protection of IP67, Switchgear Operating Mechanism shall have an IP2X Protection and Cable Chamber shall have IP3X Protection, Outer Enclosure shall be IP 54 type tested, Powder Coated with Pure Polyester Based Paint, suitable for the site installation conditions, Accidental Overpressure due to an Internal Arc is limited by the opening of the safety valve, at the bottom of the metal enclosure, away from the operator, Plug in type of extensibility must be provided and coupling busbar should not be exposed to air to avoid oxidation of busbars. Extension of cubicle shall require 450mm to handle and the gap between the coupled RMU’s must be within 10mm.
Each Load Break Switches shall comprise of 1 Nos of 11 kV, 630 Amps, 21 kA / 3 Seconds, 3 Pole, Manual, Load Break Switch, Short Time Current [STC] 21 KA for 3 Sec, Rated Power Frequency Withstand Voltage of 28 KV, Rated Lightning Impulse Withstand Voltage 75 KVp, Fault Passage Indicator System [FPIS] & Voltage Presence Indicator System [VPIS], Self Powered Numerical Protection Relay for Short Circuit, Over Current and Earth Fault, Low Energy Release Series Trip Coil for VCB Tripping Circuit, Low Voltage Ring type CT : 100-50/1A, Class 5P10, 2.5VA for each Phase, Shunt Trip Circuit for External Trip Signal, all Mechanical Interlocks etc. as per IEC 62271-100/102/200 and 1 Nos of Fault Passage Indicator [FPI] with Current Sensors [CBCT] for Earth Fault.
Notes: [a] An operator situated in front, lateral and rear [A-FLR 21kA – 1 Sec, Downwards Exhaust, for Tank as well as Cable Compartment] of the RMU Switchboard during an internal fault shall not be exposed to the effects of Arcing. Internal Arc Type Test Report for IAC AFLR 21 kA for 1 Sec for both Tank & Cable Box shall be for minimum 3 Way / 3 Function RMU. [b] All operations shall be from front of the RMU, including access to cable bushings. Bushings along the sides or the rear of the RMU are not acceptable. [c] The rate quoted is also deemed to be including the cost of connection of HT Cables up to 3 Core, 120 Sq.mm from 2 Pole / 4 Pole Structures, removing of cable loop and reconnection to RMU complete all as specified and as directed. [d] End termination joints shall be measured and paid separately. [e] CONSTRUCTION OF PLINTH / FOUNDATION FOR 11 kV RMU: The rate quoted is deemed to be including the cost of Plinth / Foundation and nothing shall be paid extra on this account. The foundation shall consists of Two Parallel Block Masonry Walls built in Cement Mortar 1:6 of length 2.10m, suitable thickness and height as per the manufacturer’s instructions over PCC Concrete Bed of 150mm thick in PCC 1:4:8, Type D-2, using 40mm graded stone aggregate over 150mm thick Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rolled, over 150mm thick Sand Bed, rendering to brick surfaces, 15 mm thick in Cement Mortar 1:4, and finishing the top surface even and smooth without using extra cement, applying Three coats of white washing including earthwork excavation complete all as per manufacturer’s recommendations, drawings, as specified and as directed.
HUMERS INFRATECH
M/S ISLAND REALCON INDIA PVT. LTD
ISLAND SALES ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .