REPAIR TO FURNITURES AT AF STATION JAIPUR

Amount

BED HARD FD/E6/MAP/08

Removing old u/s top and S&F new top of plywood (Make: Greenply/Century/ Action tesa/Kitply/Archidply) of 12mm thick BWR Grade ISI Marked confirming to IS-303 of Bed plywood made to shape & size as shown on drg and complete all as directed by Engr in Charge.

Removing old u/s head board and S&F new head board made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis) ISI marked dully covered with PVC beading 2mm thick all around with suitable screw with cleats as specified on drg and complete all as directed by Engr in Charge.

Description all as per Ser No 1.02 here-in-before but for foot board.

S&F new PVC hard rubber shoes as per drg and complete all as directed by Engr in Charge.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed.

BOOK CASE STEEL FD-90(M)

Shelf: M&L for removing old worn out Shelf from Book Case Steel and S&F new shelf made out of 1 mm thick MS Sheet complete all as specified on drg and as directed by Engr in Charge.

Shutters: M&L for removing old worn out Shutters from Book Case steel and S&F new Shutter with made out of 1 mm thick MS Sheet with 3mm plane glass complete all as specified on drg and as directed by Engr in Charge.

Lock: M&L for removing old worn out lock from Book Case steel and S&F new lock (Set of four lock with one set of key) (Make : Godrej) complete all as specified on drg and as directed by Engr in Charge.

Handle: M&L for removing old worn out handle from Book case steel and S&F new handle of best quality complete all as specified on drg and as directed by Engr in Charge.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed.

CHAIR CB STEEL WITH ARM FD-75(M)

S&F MS cleats of size 20x30x65mm wide weld to existing frame for fixing the seat and back complete all as specified and directed.

Removing u/s frame seats and S&F new frame seats with cane complete all as specified and directed.

Removing u/s frame back and S&F new frame back with cane complete all as specified and directed.

S&F new 2nd class HW Handle of suitable size complete all as specified and directed.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed.

CHAIR CB STEEL WITHOUT ARM FD-75(M)

S&F MS cleats of size 20x30x65mm wide weld to existing frame for fixing the seat and back complete all as specified and directed.

Removing u/s frame seats and S&F new frame seats with cane complete all as specified and directed.

Removing u/s frame back and S&F new frame back with cane complete all as specified and directed.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed.

CHAIR COMPUTER/REVOLVING/EXECUTIVE/ - FD/E6/MAP/01 & TP

Seat & Back: M&L for removing existing u/s seat and back and S&F new seat and back re-upholstering with new Fabric containing material like Acrylic, Polyester, Poly viscose, Poly propylene of color as approved by Eng-in-charge on PU foam of 50 density, 75mm thick for seat and 50mm thick for back, fixed over 12mm thick hot pressed plywood duly stitched with PVC lipping complete all as specified on drg and as directed by Engr in Charge. Note: Seat and back will measured as one unit in chair.

Castor Wheel: M&L for removing existing u/s or broken castor wheel and S&F of New Castor wheel to the chair in suitable pattern/model to match the original complete all as specified and as directed by Engr in Charge.

Handle: M&L for removing existing broken/ u/s handle from the chair and S&F new handle made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original complete all as specified and as directed by Engr in Charge.

Bottom Base: M&L for removing existing u/s or worn out bottom base from the Chair & supply and fix new Base with castor wheel to the chair in suitable pattern/model to match the original complete all as specified and as directed by Engr in Charge.

Gas lifting Hydraulic System: M&L for removing of old u/s gas lift and providing new gas lift maintenance free, environmental friendly, chrome free cylinder tube fixed in a MS black powder coated into centre column tube 38mm dia and 2mm thick. It shall have 100mm stroke length and gas pressure of 300 force complete all as specified in drg and directed by Engr-in-charge.

Mechanism: M&L for removing existing u/s or broken Mechanism and S&F of New Mechanism to the chair in suitable pattern/model to match the original complete all as specified on drg and as directed by Engr in Charge.

CHAIR VISITOR WITH ARMS: - TP

M&L for removing existing old unserviceable seat from the chair and S&F new seat frame made of 12mm thick hot pressed plywood with re-upholstering with new fabric containing material like Acrylic, Polyester, Poly viscose Poly propylene of approved quility and color, duly stitched with PVC lipping all around on PU foam of 50mm, 50 density after tightning existing frame by welding complete all as directed by Engr in Charge.

Description all as per Ser No 6.01 here-in-before but for Back of chair visitor.

Handle: M&L for removing existing broken/ unserviceable handle from the chair and S&F new handle made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original complete all as directed by Engr in Charge.

S&F Rubber stoppers with MS screw complete all as specified and directed.

M&L preparation to steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed.

TABLE BED SIDE FD/E6/MAP/15

Removing u/s top and S&F new Top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Action Teesa) ISI marked and exposed side of board to be coverd with matching PVC strip complete all as specified and directed.

Removing u/s top drawer and S&F new Top drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Action Teesa) ISI marked with front side with 12mm BWR grade plywood in three sides and 6mm BWR plywood as bottom along with Chromium Plated handles complete all as specified and directed.

Removing u/s bottom drawer and S&F new bottom drawer made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Action Teesa) ISI marked with front side with 12mm BWR grade plywood in three sides and 6mm BWR plywood as bottom along with Chromium Plated handles complete all as specified and directed.

Removing u/s back and S&F new back made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked and exposed side of board to be coverd with matching PVC strip complete all as specified and directed.

Removing u/s side and S&F new Side made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked and exposed side of board to be coverd with matching PVC strip complete all as specified and directed.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed.

TABLE COMPUTER - FD/E6/MAP/03

Removing u/s top and S&F new Top made of 18/19mm thick Prelaminated MDF Board exterior grade (Make:- Greenlam/Century) ISI marked and exposed side of board to be coverd with matching PVC strip complete all as specified and directed.

Removing u/s shelves and S&F new shelves made of 18/19mm thick Prelaminated MDF Board exterior grade (Make:- Greenlam/Century) ISI marked and exposed side of board to be coverd with matching PVC strip complete all as specified and directed.

Removing u/s drawer and S&F drawer made of 18/19 mm thick prelaminated MDF Board (Make:- Greenlam/Century) ISI marked and exposed side of board to be coverd with matching PVC strip with telescopic chanel complete all as specified and directed.

Removing u/s pullout tray and S&F new pullout tray made of 18/19 mm thick prelaminated MDF Board (Make:- Greenlam/Century) ISI marked and exposed side of board to be coverd with matching PVC strip with telescopic chanel complete all as specified and directed.

Removing u/s sides and S&F new sides made of 18/19 mm thick prelaminated MDF Board nd exposed side of board to be coverd with matching PVC strip complete all as specified and directed.

Removing u/s knob and S&F new knob for drawer as approved by Engr in Charge..

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed.

TABLE OFFICE CLERK STEEL FD-1004

Removing u/s top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis/Action Teesa) ISI marked confirming to IS-14587 Grade-I with 6mm half round teak wooden beading fixed with fevicol and headless nails all round the edges complete all as specified and directed.

Removing u/s drawers and S&F new drawers made out of 1 mm thick MS Sheet complete all as specified and directed.

Removing u/s locks of drawer and S&F brass locks of size 40mm, 5 lever ISI marked with duplicate key complete all as specified and directed.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed.

CHARPOY GI PIPE - FD-220

M&L for removing existing u/s and broken long rail and supply and fix new long rail of GI Pipe, 32 mm bore, medium grade, ISI marked, threaded at both ends, fixed in position complete all as shown on drawing and as directed by Engr in Charge.

M&L for removing existing u/s and broken short rail and fabrication and fixing of short rail by cutting and converting from long rail obtained from item No. 10.01 here-in-before and threading the both ends, fixed in position complete all as specified and directed.

M&L for removing existing u/s and broken legs from charpoy and fabrication and fixing of legs by cutting and converting from short rails obtained from item No. 10.02 and threading at one end and S&F MS bottom plate 3mm thick 55mm dia by welding at other end of legs and fixed in position complete all as specified and directed.

Removing existing u/s GI check nuts of charpoy and S&F new check nut 6mm thick, 32mm bore, fixed in position complete all as specified and directed.

Removing existing u/s GI elbow from the frame of GI charpoy and S & F new GI elbow 32 mm dia, ISI Marked and fixed in position complete all as specified and directed.

M&L for flat iron stiffner of size 900x50x6mm duly painted with two coat of black color synthetic enamel paint over a coat of red oxide/primer and fitted over the long rail by drilling holes in flat iron and long rail on both side of every stiffner complete all as specified and directed.

S&F MS iron strips of size 75x50x6mm duly holed/drilled for tightening plywood and strip with semi circular top bolts and washer and welded to strip with each corner of charpoy including painting with two coat of black color synthetic enamel paint over a coat of red oxide/primer complete all as specified and directed by Eng-in-charge.

Removing of existing nylon newar from charpoy and S&F 12mm thick comercial plywood BWR grade ISI Marked confirming to IS-303 (Make-Greenply /Archid ply/Century ply/kitply) with mild steel nuts and bolts of 75mm long , 6mm thick with hexagonal or square head at one end with washer (02 Nos on each long rail and 02 Nos on each short rail/stiffner) after drilling holes complete all as specified and directed.

TABLE DINING OR (FD-165)

Removing u/s top and S&F new top made of 18mm thick Prelaminated particle Board (Make: Green Panelmax /Action tesa/ Asis/Action Teesa) ISI marked of size 72'x24' with 18mm teak wood beadings all round the edges complete all as specified and directed.

Removing u/s legs and S&F legs made of 25mm MS square pipe, 1.6mm wall thickness fixing neatly with Gas welding complete all as specified and directed.

Removing u/s centre stiffner/long rail and S&F new centre stiffner/long rail made of 25mmx 25mm MS square pipe, 1.6mm wall thickness fixing neatly with Gas welding complete all as specified and directed.

Removing u/s side stiffner/short rail and S&F new side stiffner/short rail made of 25mmx 25mm MS square pipe, 1.6mm wall thickness fixing neatly with Gas welding complete all as specified and directed.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint complete all as specified and directed.

LOCKER STEEL FD-1029, FD-257

Removing u/s Shelves and S&F new shelves made out of 1mm thick MS sheet as per drawing and fixed by necessary welding complete all as specified and directed.

Removing u/s door and S&F new door made out of 1mm thick MS sheet as per drawing complete all as specified and directed.

Removing u/s legs and S&F new legs made out of 18 guage MS sheet made to shape and size as per drawing complete all as specified and directed.

Removing u/s hinges and S&F new hinges of required size as per drawing complete all as specified and directed.

Removing u/s handle and S&F new crromium plated handle of size 100mm with nuts and bolt washer as per drawing complete all as specified and directed.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint Out side and In side complete all as specified and directed.

ALMIRAH LARGE AND MEDIUM FD-1031, FD-1032

Removing unserviceable locks and S&F new lock (Make : Godrej) 6 lever with duplicate key as per drg complete all as specified and directed.

Removing u/s handle and S&F new chromium plated handle of size 125mm with nuts and bolt washer as per drawing complete all as specified and directed.

M&L for preparation to steel surfaces and applying two coats of synthetic enamel paint Out side and In side complete all as specified and directed.

BED HARD WITH PLY TOP FD-246,FD-247

Removing old u/s plytop and S&F new plytop of 12mm thick commercial plywood BWR grade confirming to IS-303 (07 ply) ISI marked (Make: Greenply/Archid ply/Century ply/Kitply) to be fixed with 25mm long steel screw with out any joint as per drg complete all as specified and directed.

Removing old u/s long rail and S&F new Long rail made of well seasoned teak wood free from cracks and dead knots, shape and size complete all as specified and directed.

Description all as per serial item No. 14.02 here-in-before but to short rail as shown on drg.

HEAD REST: Removing u/s ply and S&F new 3mm thick plywood both side of Head board one side teak faced and other side commercial plywood BWR grade general purpose type ISI marked conforming to IS 303 including 4mm beading all around as shown on drg complete all as specified and directed.

FOOT REST: Description all as per serial item No. 14.04 here-in-before but to foot rest as shown on drg.

HEAD REST: Removing u/s head rest of bed ply top and S&F new head rest complete (well finished with polishing) of bed ply top along with MS angle strip and screw of suitable size as per drg and complete all as specified and directed.

FOOT REST: Description all as per serial item No. 14.06 here-in-before but to foot rest as shown on drg.

S&F of MS corner bracket in right angled shape of suitable size with six holes duly painted with black enamel paint over and including one coat of red oxide/primer with suitable MS screw to bed complete all as specified and directed.

CHAIR DINING SPECIAL/LONG BACK/ (FD-1049(M), FD-1105, FD/MAP-II/03 & TP) : -

Replacement of u/s Stiffener made of 1st class hard wood (one large piece and two small piece) complete all as specified and directed.

Replacement of u/s Front leg made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Rear leg made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Front/side rail made of 1st class hard wood complete all as specified and directed.

Replacement of u/s bend stiffner for back rest made of 1st class hard wood complete all as specified and directed.

Replacement of old u/s Seat and S&F new Seat made made of 40 density foam (Make: Sleep Well, Featherfoam, Kurlon(Gold)) duly covered with tapestry cloth over 12 mm thick plywood (Make: Greenply/Century /Action tesa) of BWR Grade ISI Marked conforming to IS-303 complete all as specified and directed. Note: Rate of tapestry cloth shall not be less than Rs 400/-per RM and colour and texture of Tapestry shall be approved by AGE.

CHAIR DINING FD-279 : -

Replacement of u/s Stiffener made of 1st class hard wood (one large piece and two small piece) complete all as specified and directed.

Replacement of u/s Front leg made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Rear leg made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Front/back/side rail made of 1st class hard wood complete all as specified and directed.

Replacement of u/s seat/back rest made of 1st class hard wood complete all as specified and directed.

M&L for removing of u/s cane from chair including recaning with new cane of white colour of size 3 mm wide ala around for border of seat and back and 2 mm wide half round for remaining portion of chair dining complete all as specified and directed.

CHAIR EASY FD-229, FD-17(M) : -

Replacement of u/s Stiffener made of 1st class hard wood (one large piece and two small piece) complete all as specified and directed.

Replacement of u/s Front leg made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Rear leg made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Front/back/side rail made of 1st class hard wood complete all as specified and directed.

Replacement of u/s back rest made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Arms of suitable size as shown on drg complete all as specified and directed.

M&L for removing of u/s cane from chair including recaning with new cane of white colour of size 3 mm wide all around for border of seat and back and 2 mm wide half round for remaining portion of chair easy complete all as specified and directed.

CHAIR WRITING FD-282,FD-20(M)

Replacement of u/s Stiffener made of 1st class hard wood (one large piece and two small piece) complete all as specified and directed.

Replacement of u/s Front leg made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Rear leg made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Front/back/side rail made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Arms of suitable size as shown on drg complete all as specified and directed.

Replacement of u/s back stiffner made of 1st class hard wood complete all as specified and directed.

M&L for removing of u/s cane from chair including recaning with new cane of white colour of size 3 mm wide all around for border of seat and 2 mm wide half round for remaining portion of chair writing complete all as specified and directed.

COMPUTER TABLE - TP

Removing of old/us top and S&F new top made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Panelmax /Action tesa/ Asis) ISI marked with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete all as specified and directed.

Removing old u/s Shelves/drawer and S&F new shelves/drawer made of 18/19 mm thick prelaminated MDF Board with Type-II telescopic chanel complete all as specified and directed.

Removing old u/s side/partion and S&F new Side/partion made of 18/19 mm thick prelaminated MDF Board complete all as specified and directed.

SOFA SET BERRY LEATHRITE (3+1+1)SEATER -TP Repairs to sofa set 5 seater Berry leathrite by replacement of old U/S part as spring ,leather,cushions and wooden FRC of any description of seat and back completely and with fixing new tapestry cloth of approved quality complete all as specified and directed by Engr-in-Charge.

TABLE DINING 6 PERSON FD-273/FD-239/FD-376

Removing old u/s Table top and S&F new table top made of 18/19 mm thick Prelaminated MDF Board exterior grade with 6mm half round teak wood beading fixed with fevicol and headless nails all around the edges complete all as specified and directed.

Removing of old/us legs and S&F new leg made of 1st class teak wood complete all as specified and shown in drg.

Replacement of u/s Long rails made of 1st class teak wood complete all as specified and directed.

Replacement of u/s Short rails made of 1st class teak wood complete all as specified and directed.

TABLE PEG FD-277 & 384

Removing old u/s Table top and S&F new table top made of 18/19 mm thick Prelaminated MDF Board exterior grade with teak wood beading 04 mm thick half round fixed with fevicol and headless nails all around the edges complete all as specified and directed.

Replacement of u/s legs of suitable pattern and size complete all as specified and directed.

Replacement of u/s Long rails made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Short rails made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Stiffener made of 1st class hard wood (two large piece and two small piece) complete all as specified and directed.

SOFA SET 5 SEATER FD-373,FD-258,FD-281

Replacement of u/s Arms made of 1st class hard wood of suitable size and shape as shown on drg complete all as specified and directed.

Replacement of u/s wooden batten of seat frame made of 1st class hard wood complete all as specified and directed.

Replacement of u/s front rail of seat (3 seater sofa) made of 1st class hard wood complete all as specified and directed.

Replacement of u/s Front/rear legs and S&F new Front/rear legs made of 1st class teak wood complete all as specified and shown in drg.

Replacement of u/s Stiffeners support and S&F new stiffeners made of 2nd class teak wood complete all as specified and shown in drg.

Replacement of u/s Front or Back Plywood of sofa (3 seater) and S&F new Front or Back Plywood of 12mm thick (Make: Greenply/Century/kitply) of BWR Grade ISI Marked conforming to IS-303 complete all as specified and directed.

Replacement of u/s Front or Back Plywood of sofa (single seater) and S&F new Front or Back Plywood of 12mm thick (Make: Greenply/Century/kitply) of BWR Grade ISI Marked confirming to IS-303 complete all as specified and directed.

S&F in replacement foam cushion (ISI marked conforming to IS-1741) (Make: Sleep Well/Kurlon) 10 Nos each set for sofa set 5 Seater, made of foam 40D of size 22”X21”X100/95mm for seat and back covered with superior quality tapestry cloth stitched with Zip opening system with two runners at both ends as approved by Eng-in-charge. Note : The foam cushion in original packing and tapestry cover shall be brought separately and fixed duly after inspection and approval by Engr-in-charge. Colour and texture of Tapestry shall be approved by Engr-in-charge.

M&L for replacing only cushion cover of size 22"x21"x4" made of superior quality tapestry cloth with Zip opening system of two runner in each cover complete all as specified and directed and as approved by Engr-in-charge.

TABLE BED SIDE FD-276 & 248:-

Replacement of old u/s side with new side made of 18mm thick prelaminated particle board (Make: Green Panelmax /Action tesa/ Asis) including leg of table with 4mm thick teak wood beading all around complete all as specified and directed.

Replacement of old u/s Top with new top made of18mm thick prelaminated particle board top side of the table made out of teak faced with 4 mm thick teak wood beading all around complete all as specified and directed.

Replacement of old u/s middle shelf with new middle shelf made of 18mm thick prelaminated particle board (Make: Green Panelmax /Action tesa/ Asis) including leg of table with 4mm thick teak wood beading all around complete all as specified and directed.

Replacement of old u/s bottom shelf with new bottom shelf made of 18mm thick prelaminated particle board (Make: Green Panelmax /Action tesa/ Asis) including leg of table with 4mm thick teak wood beading all around complete all as specified and directed.

Replacement of old u/s back ply with new 6mm thick commercial ply on back side of the table bed side complete all as specified and directed.

FRECH POLISH: M&L for cleaning, mild grinding and preparing the wooden surface of any description, filling of cracks with putty/wood filler including tightening of loose joints if any and appling two coats of french polish for the following furnitures. Color/shade shall be approved by Engr-in-charge.

Bed hard with ply top FD-246,FD-247

Chair Dining Special/Long back/ (FD-1049(M), FD-1105, FD/MAP-II/03 & TP) : -

Chair Dining FD-279 : -

Chair easy FD-229, FD-17(M) : -

Chair writing FD-282,FD-20(M)

Computer Table - TP

Table Dining 6 Person FD-273/FD-239/FD-376

Table Peg FD-277 & 384

Sofa set 5 seater FD-373,FD-258,FD-281

shekhar & company (BID ID -3196860)