CA NO CWE/PM/SP-35/2019-20

Amount

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in hard/dense soil complete, all as specified and directed by Engineer-in-Charge.

All as per item No 1.00 here-in-before but in soft/disintegrated rock.

All as per item No 1.00 here-in-before but in hard rock.

M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable i.e. total 23 cm and after punning down sand cushioning will be 18 cm complete, all as specified and directed by Engineer-in-Charge. Note :- 18 cm thick only will be considered for payment purpose.

Supply and laying unreinforced precast concrete cable cover class HV type-I, flat, size 300mm x 180mm x 40mm complete, all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm complete, all as specified and directed by Engineer-in-Charge.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete, all as specified and directed by Engineer-in-Charge.

Dismantling disconnecting and taking out existing unserviceable defective cable including cable joint kits of any size any type from trenches/duct including taking out old bricks and sand complete, all as specified and directed by Engineer-in-Charge.

M&L for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables(heavy duty) with aluminium conductor, 11000 volts earthed grade cross sectional area 120 Sqmm 3 core with thimbles and all accessories complete, all as specified and directed by Engineer-in-Charge.

M&L for cable jointing kit for 11 KV (E) grade cable for straight through cold shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm complete, all as specified and directed by Engineer-in-Charge.

M&L for cable jointing kit for 11 KV (E) grade cable for indoor termination cold shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm complete, all as specified and directed by Engineer-in-Charge.

M&L for cable jointing kit for 11 KV (E) grade cable for outdoor termination cold shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm complete, all as specified and directed by Engineer-in-Charge.

S&F HT 11 KV cable route indicator made out of cast iron in elliptical shape with embossed HT cable 11 KV on route indicator including standing stamp with fixing arrangement into ground with necessary PCC block of required size complete, all as specified and directed by Engineer-in-Charge.

M&L for boring/auguring under road/hard standing by using trench less technology for making suitable hole and insertion of 80mm dia GI pipe not less than 600mm below existing PCC/Road/hard standing complete, all as specified and directed by Engineer-in-Charge. Note : GI pipe will be measured and paid separately.

Supply & laying GI tubing light grade as in cable protection pipe including all fittings complete for the size 80mm dia bore complete, all as specified and directed by Engineer-in-Charge.

M&L for cutting of metallic road up to a size not exc 20cm width and not exc 90 cm in depth by machine for laying of protection pipe for cable including making good the disturbed surface of road by providing 40mm graded crushed stone aggregate and black top with black bituminous up to existing surface of road complete, all as specified and directed by Engineer-in-Charge.

M&L for removing interlocking tiles carefully and cutting the existing surface upto a size not exc 20 cm width and not exc 90 cm in depth for laying of protection pipe for cable including making good the disturbed surface and relaying the serviceable interlocking tiles and replacing the broken tiles with new one complete, all as specified and directed by Engineer-in-Charge.

M&L for cutting of hard standing upto a size not exc. 20cm in width and not exc. 90 cm in depth for laying of protection pipe for cable including making good the disturbed surface by providing PCC (1:2:4) type B-1, (using 40mm graded stone aggregate) complete, all as specified and directed by Engineer-in-Charge.

M/S MG GROUP

Commercial Traders

TUSHAR ASSOCIATES

Shiv Enterprises

Flint India

Amson electronics