S.I.T.C of Booster pumps sets ic all accessories with by back of existing old pumps, pipes base frame and scrap of panels in pump house at service block, office building NFM II Azadpur

Amount

Supply, installation, testing and commissioning of Kirlosker make 10.0 HP/ 7.50 KW Mono block pump suitable for three phase supply , 50 Hz , 415 volts, Sync speed 3000 rpm KDS 1030++/1040+/1050++/1065++ ) ,size of Suction 100 mm X Del 100 mm . The pump set shall be fixed/ installed at M S C Chanel base frame of suitable shape as required and size of C Chanel shall be 50mm X 50mmX 6 mm thick , anti vibration pads shall be fixed in between M S Frame and Mono block pump set.

Supplying, fixing, testing and commissioning of 25 mm dia. pipes of following sizes of G I ‘C’ class along with necessary clamps, vibration isolators and fittings such as reducers as required to fix the pipe with delivery/ suction of vacuum pump bends, tees etc..but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.

Supply of 4X35 Sq mm PVC insulated PVC Sheathed cable Armored aluminum conductor cable

Supplying PVC insulated and FR PVC Round Sheathed, Copper Conductor of size 3X10 Sq mm (flexible) industrial cable, 1100 Volts, conforming to IS: 694 required.

Supply, installation, testing and commissioning of L T control panel made of 1.6 mm CRCA sheet multi tier wall mounted with 300 Amp aluminum bus bars 3 phase and neutral i/c solid internal connections with aluminum bus bars/connectors of incomers, out goings , starters, volt meter, ammeters, phase indicators etc. The size of panel shall be 1500mmX1500 mm X 600 mm deep. The panel shall be fixed with proper nut, bolt, fasteners as required. The panel shall consisting following accessories as under:- i) MCCB 200 A 35 K A 4P as incomer - 1 No ii) MCCB 125 A 16 K A TP as outgoing 3 Nos. iii) Star delta fully automatic starters with over loaded and under voltage relay suitable for 10 H P booster pumps 2 Nos. iv DOL starter with protection suitable for 1 No. v) Volt meter 0- 500 V 1 No. vi) Ammeter 0- 300 A 1 No. vii) LED Indicators 1 Set

Supplying and installing of 100 mm width X 50 mm depth X 1.6 mm thickness perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

Supplying and installing of 100 mm width X 50 mm depth X 1.6 mm thickness perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.

Supplying, fixing, testing and commissioning of 25 mm dia. BUTTERFLY VALVE (MANUAL), with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.

Supplying, fixing, testing and commissioning of 100 mm dia. MS pipes ‘C’ class along with necessary clamps, vibration isolators and fittings such as bends, tees reducers etc..but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.

Supplying, fixing, testing and commissioning of 100 mm dia. BUTTERFLY VALVE (MANUAL), with CI body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified.

Supplying, fixing, testing and commissioning of 100 mm dia. NON - RETURN VALVE with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade up to 35 sq. mm (clamped with 1mm thick saddle) on cable tray as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with exiting surface/recessed conduit/submain wiring/cable as required.

Supplying and making end termination with brass compression gland and aluminum lugs for 4 X 35 sq. mm (32mm) PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

Buy back rates of old dismantled 10 H P motor booster pump sets i/c dismantling charges

Buy back rates of old dismantled M S pipe , valves , base frame , LT Panel without MCCB,MCB, starters etc i/c dismantling charges

M/S MASTER ELECTRIC STORE

Rajesh Electrical Works