Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹11.5 L
EMD Value
₹22,971
Closing Date
11 Nov 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Rate contract for Rewinding of 03 phase Induction Motors/Pumps/Exhaust Fan and DC Motors etc. for the period of 02 years
17358
RWA-24IN/3/1 Dated : 09.10.2024
Works
Accessories Complex - Lucknow Divn - Plant Maintenance
₹0
₹22,971
11 Nov 2024
21 Oct 2024
21 Oct 2024
11 Nov 2024
PRICE BID FORMAT
Tender No.: RWA-24IN/3/1, Dated 09.10.2024
Sl. No. Description (Electrical Items) Qty. SAC/HSN Code Unit Rate Amount Rs.
1 0.5 HP and below 3Ph induction motor. 5
2 Above 0.5 HP upto 1.0HP 9
12 Coolant Pump 0.1 KW/ 0.15KW 4
13 Monoblock Pump (2.0 HP to 5HP) 24
14 10 HP Mono Block Pump 11
15 Bench Grinder 365 W 2
16 Exhaust Fan 24” 2
17 Exhaust Fan 36” 4
1/15 HP to 0.5HP
18 Rotor/ Armature 2
19 Stator/ Field 2
0.75 HP to 1.0 HP
20 Rotor/ Armature 2
21 Stator/ Field 2
More than 1.0 HP upto 2.0 HP
22 Rotor/ Armature 30
23 Stator/ Field 30
Grand Total Rs.
Net Amount in Words:
Remark (If any) :
Name of Vendor:
Tender No. RWA-24IN/3/1, Dated 09.10.2024
INSTRUCTIONS FOR SUBMITTING OFFER
i) Bidder must strictly comply with these instructions while submitting the offer.
ii) Bidder to categorically confirm that offer submitted is as per instructions given herein.
S.N. Clause Bidder Confirmation (To be filled by Bidder)
1 Please submit your Quotation for following items in Two parts (Price & Technical Bid) in the prescribed format uploaded on e-portal.
2 No hard copy of the offer is to be sent.
3 Scan copies of undermentioned documents to be uploaded on E-portal:
a). Proof for PAN No.
b). GST Registration Certificate.
c). Firm PF & ESI certificate (if applicable).
d). MSME registration certificate (if applicable).
e). Firm registration certificate
f). Financial standing/Solvency Certificate for minimum value of Rs.4,59,415/- from any nationalized/scheduled bank issued within the period of 12 months from the final date of submission of tender.
g). Average annual financial turnover during last three years, ending 31st March of previous financial year, audited proof to be attached and should be at least Rs. 3,44,561/-
h). Proof of experience of having successfully completed similar work during last 7 years ending last day of months previous to the one in which tender are invited should be either of the following. i) Three similar completed works each costing not less than the amount Rs.4,59,415.00 Or ii) Two similar completed works each costing not less than the amount Rs.5,74,269.00 Or iii) One similar works completed each costing not less than the amount Rs.9,18,830.00
4 If you are unable to quote, please submit regret response.
5 Disregard of any instructions, may result in your offer being ignored.
Note: Bidders / Tenderers are requested to attach scan copies of all the relevant / desired / required proofs/ documents on e-portal, failing which tender shall be summarily rejected without assigning any reason to bidders. * Here similar work means work related repair, rewinding work of 3 phase Induction motors, DC motors, electrical items etc.
Tender No. RWA-24IN/3/1, Dated 09.10.2024
TECHNICAL COMPLIANCE MATRIX / SCOPE OF WORK
Sl. No. Description (Electrical Items) Qty. Completion Time (Days) Complied/ Not Complied Status of Offered Items (To be filled by Supplier)
1 0.5 HP and below 3Ph induction motor. 5 15
2 Above 0.5 HP upto 1.0HP 9 15
12 Coolant Pump 0.1 KW/ 0.15KW 4 15
13 Monoblock Pump (2.0 HP to 5HP) 24 15
14 10 HP Mono Block Pump 11 15
15 Bench Grinder 365 W 2 15
16 Exhaust Fan 24” 2 15
17 Exhaust Fan 36” 4 15
1/15 HP to 0.5HP
18 Rotor/ Armature 2 15
19 Stator/ Field 2 15
0.75 HP to 1.0 HP
20 Rotor/ Armature 2 15
21 Stator/ Field 2 15
More than 1.0 HP upto 2.0 HP
22 Rotor/ Armature 30 15
23 Stator/ Field 30 15
1 Motor to be rewound with high conductivity enameled copper wire of insulation class ‘F’
2 Varnishing of windings to be done by Dr. Beack Varnish.
3 High quality insulation is to be used (insulation class ‘F’)
4 Scrap copper to be retained by the contractor.
5 Old bearings are to be returned to our store.
6 Completion time shown above may vary as per actual situation.
Rates of rewinding should include:
1 Material and Labour required for rewinding.
2 Any type of lathe works, if necessary.
3 Replacement of motor terminal blocks with original terminals wherever required.
4 Replacement of bearings (old bearings to be returned with rewound motor).
5 Cost of any transport required (Carrying the item to Contractor works and delivery of rewound item at site).
6 Any taxes/duties payable.
Name of Vendor:
Tender No. RWA-24IN/3/1, Dated 09.10.2024
S.N. TERMS AND CONDITIONS Remarks (To be filled by bidder)
1 The contractor shall fully acquaint himself with the scope and nature of working conditions, etc before submission of tender/offer. No claim will be considered later on the grounds of ignorance or otherwise of the conditions under which the work will have to be executed.
2 Acceptance of Tender: The Contractor shall be bound to accept the award of contract at the rates quoted/ agreed by him. Failing which the party shall be debarred/ blacklisted as per HAL-ADL rules.
3 Contract Period:The Contract shall be valid for Two Years from the date of start of work subject to site clearance.
4 Compensation for Delay: If the work is not completed with in stipulated date of completion, the compensation for delay shall be deductible from any sum payable to you under work order or any other contract with HAL. The compensation delay shall be @ 0.5% of total payable amount per week limited to the maximum 7.5% of total contract amount.
i) The quoted price shall be on the unit rate basis. Please note that basis of evaluation of lowest tender will be the package value offered for subject work.
ii) The prices shall be inclusive of all taxes and duties except GST. Mention the percentage of GST clearly on contract value if applicable.
iii) The rates quoted shall be valid till completion of the work and free from variation due to increase in the cost of material, labour or any other reason whatsoever.
6 Security Deposit:-
6.1 The successful tenderer will be required to furnish security deposit for the fulfillment of contract. The security deposit shall be 5% of the original contract value: -
i Security deposit will be deposited in the form of Bank Guarantee/ Demand Draft in favor of HAL, Accessories Division, Lucknow within 21 days of acceptance of work order or before commencement of work whichever is earlier otherwise penalty will be deducted for delay period as per rule. The Security deposit shall be refunded after satisfactory completion of work and completion of defect liability period.
ii The EMD deposited will be adjusted toward security deposit and balance amount shall be deposited through demand draft in favor of HAL, Accessories division, Lucknow payable at Lucknow.
iii Any delay in submission of security deposit shall attract a penal recovery for delay period @ 2% of security deposit per week or part thereof with a maximum penalty of 25% of security deposit.
7 Payment Terms:- The terms of payment shall be as follows:
i). Payment shall be made on Pro-rata basis completion of work after certified by Engineer-in-charge that work has been completed satisfactorily as per scope of work and that no penalty is laviable for any deviation. Payment will be made through e-payment system.
ii). GSTand other Taxes shall be applicable as per rules at the time of payment.
8 Risk Clause: The contractor shall be responsible for completion of service contract as required by HAL-ADL as per contract terms & conditions. In case, the contractor fails to execute the contract either in terms of quality or quantity or if any work remains unattended within the stipulated time, HAL-ADL is empowered to take decision and get the same attended by any other Agency at the risk and cost of the Contractor. Any extra expenditure incurred in this connection will be recovered from the bills of the Contractor.
9 Contract Agreement: Successful contractor shall execute an agreement on a general stamp paper of the value of Rs. 200.00 on the enclosed Proforma. All partners of the contractor shall sign the agreement or one partner should have proper authority letter from all other partners. The authority letter has to be forwarded with the agreement. The agreement is to be executed within 30 days from the date of acceptance of work order. Any delay in execution of agreement shall attract a penal recovery @ Rs. 2500.00 per week subject to maximum of Rs. 10,000.00.
10 Defect Liability Period: The defect liability period for this work shall be six months after completion of work. During this period contractor shall be responsible for rectification of all defect noticed and attributed to defective workmanship in respect of the work executed.
i) Staff: Entry of staff engaged for the work shall be controlled as per HAL security rules & regulations.
ii) Material: All material whether to be consumed in the work or to be taken back later shall be entered through proper challans duly checked & entered by HAL security gate.
12 Parallel Contract: HAL reserve the rights for entering into parallel contracts with other firms/ Contractors for the same requirement if it is found necessary.
13 Validity of offer: Offer should be valid for a period of at least 120 days from the date of opening of tender.
14 General Conditions: (a) All the other terms and conditions of HAL work procedure shall be applicable to this work. (b) Required tools and tackles are to be arranged by tenderer. (c) Unsolicited letter/canvassing / post tender correction: Canvassing by tenderer in any form including unsolicited render tenders liable for rejection. (d) In any case tenderer unable to quote kindly return these document indication their liability to quote this work. (e) The undersign reserves all the right to accept/ reject any or all the tenders without assigning any reason whatsoever.
Note: The Bidders / Tenderers are requested to attach scan copies of all the relevant / desired / required proofs/ documents on e-portal, failing which tender shall be summarily rejected without assigning any reason to bidders.
Name of Vendor:
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 0.05 MB
D_PRICE_BID_FORMAT.xlsm
TENDER_DOCUMENT • 0.01 MB
Eligibility.xlsm
TENDER_DOCUMENT • 0.01 MB
C_SCOPE_OF_WORK.xlsm
TENDER_DOCUMENT • 0.01 MB
B_TERMS_CONDITIONS.xlsm
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .