Augmentation of Existing Water Supply Scheme Lohar (MHPC) Block Chohla Sahib, Distt. Tarn Taran. Under 2a(i)JJM

Amount

Providing Proposed water connection to house hold up to wall with prov. Laying jointing testing GI pipe lines 15mm i/d = 2.5m B-Class as per CSR 2B.36a (above GL) Prov. And fixing MDPE pipe with specials 2m (Blow GL) including cost of specials such as Tee, Bends, sockets, elbow etc. cutting, threading and testing in trenches complete, ISI cock 15mm i/d GM ferrule as per IS:2692 and 3" i/d clamp with CI Bid cock 15mm i/d as per IS: 210 with stainless steel spindle of approved make as per CSR 30.65b Connection at existing pipe line 80 & at New pipe line 126 Total 206 Connection.

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Manually) (6kgf/cm2) (excavation & including specials)

63 mm PVC Pipe Line

75mm PVC Pipe Line

90 mm PVC Pipe Line

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechnically) (6kgf/cm2) (excavation & including specials)

63 mm PVC Pipe Line

75 mm PVC Pipe Line

90 mm PVC Pipe Line

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

63 mm O/d PVC Pipe Line

75 mm O/d PVC Pipe Line

90 mm O/d PVC Pipe Line

Dismantaling of metalled road and compacting original ground below embankment

Dismantling of interlock tile and restoration to its original Condition.

63 mm O/d PVC Pipe Line

75 mm O/d PVC Pipe Line

90 mm O/d PVC Pipe Line

Dismantling and restoration of Cement Concrete Flooring Complete in all respect

PVC pipe 63mm o/d

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department with each of Size 0.6m x 0.6m

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department (3 no. each of size 0.9m x 0.9m)

Providing & Installing Testing & Commissioning of One No. Electrically driven diaphragm opreated metering system chemical dosing chlorinator suitable for for delivering 0.5 to 6 liters of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg/cm2 and suction left not less than 1.5 mtr., as per DWSS standard specifations.

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

Development of Water Work Site

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8.

Providing & fixing PCC fencing Poles with 6 Hieght, 3"x3" Top & 4"x3" Base provided with 3 Nos. Hooks complete in all respects.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7.

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3.

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing with including D-4 & Analysis A-4 complete in all respects

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing D-7.

Providing & fixing MS Sign Board as per standard size of DWSS as per Drawing D-20

Provision of Carraige of material beyond 5km complete in all respect. (As per Detail attached)

Extra Carriage of Bajri (Course Agrregate) (Qty. as per Consumption sheet attached)

Extra Carriage of Sand (Fine Aggregate)(Qty. as per Consumption sheet attached)

ANYLSIS OF PUMP CHAMBER 3.05×3.70M (ZONE-A)

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.panelled, glazed or glazed and panelled.

i) 40mm thick Door Windows

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)

(a) 30mm thick Cup Board

Kiln seasonal Hollock wood cup board chowkats including iron hold fasts, iron hinges corner traps, wooden knobs or handles fixed in position (Size 45 x 60mm).

(a) 30mm thick Cup Board

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Ventilator 0.83

Windows 6.00

Cup board 1.55

Total

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.+Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (AS PER AC SLIP 1 CSR-2020 16.21 item Deleted)

Grills in windows 6.00

Grills in ventilator 0.87

R.S. Joint on roof 3.65

R.S. Joint on roof 0.91

Total

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete

(a) Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

White washing (Three coat)

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Providing & fixing glass strips 4mm thick in floors

50mm wide

40mm wide

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade(Qty as per sr.no 36)

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

Ventilator 0.90

Windows 6.00

Total

Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make

Repair of Existing OHSR (W/S Scheme Lohar)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) 100mm o/d (28.27 ( b )

Providing & Fixing CI/D/F expension joint complete in all respect.100mm

Providing & Fixing Aluminium Ledder Inside the tank shall be 60cm wide made from Aluminium section LS 974 size, 66.68x31.75x4mm, weight 1.27 kg/m with steps made out of Aluminium section H, SP 3024 size 35x16.70x1.60mm, weight 0.362kg/m to be fixed on side in the top dome and other side in the bottome dome (3.80Mtr. long) including all taxes & carriage etc.

Providing & Fixing MS Ladder out side of OHSR Tank (As per Standard Design)

Painting of pipes including labour