PROVISION OF CERTAIN B/R AND E/M MINOR WORKS AT CERTAIN PLACES AT AF STATION JAIPUR

Amount

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

M&L for forming jambs, etc to openings (to forgoing items), including, cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match work in CM 1:4 complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over and including a coat of primer complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief.

S&F for 4.8 mm thick sheet glass, ordinary quality, exc 0.50 Sqm in each pane, glazing with beads fixed with metal panel pins complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in Hard/dense soil, complete all as specified.

M&L for PCC 1:2:4 type B-2, using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed.

S&F angle iron or any section of any size for balusters, nosing to steps, fencing post including cutting any size embeded in concrete, cutting/drilling of holes for fixing of barbed wire, fencing, welding etc confirming to Fe 290 Gde-E-165 complete all as specified and directed.

Supply and fixing for 3.15 mm dia, expended, welded, mild stee wire fabric of mesh, size 25 mm x 25 mm, weight not exc 4 kg per Sqm, including cutting in any size, fixed to steel member such as angle/flat with welding complete all specified and directed.

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over and including a coat of red oxide and zinc chrome primer on steel surfaces of any description, over 10 cm width or girth, upto and including 12 Mtr ht otherwise described and complete all as specified and directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store yard complete all as specified.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-0, using 12.5mm graded stone aggregate as in window cill or similar work complete all as specified and directed.

M&L non skid ceramic digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed..

M&L Coloured Glazed digital ceramic tiles (350 x 250) x 7 mm/ (450 x 350) x 7mm thick or as required size as in vertical surface or dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 10 mm thick plaster in CM 1:4 complete all as specified and directed.

S&F mild steel , plain, black sheet, 1.6 mm thick in wall cladding, steel gates, and similar work cut to size, holes punched including round headed screws, clouts nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up mitred angle etc as required complete all as specified and directed.

S&F mild steel , plain, black sheet, 1 mm thick in wall cladding, steel gates, and similar work cut to size, holes punched including round headed screws, clouts nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up mitred angle etc as required complete all as specified and directed.

S & F mild steel rag or lewis bolt, 12 mm dia, screwed one end with hexagonal or squre nuts and washers the other end enlarged and jagged or lewised, n exc 15 cm long complete all as specified and directed.

M&L for writing letters or figures (block/roman/italic/indian, hindi or english) n exc 30cm hight with synthetic enamel paint complete all as specified and directed.

M&L for PCC 1:3:6 type C-2, using 40 mm graded stone aggregate as in pillars, boundary pillars and fencing post or similar work complete all as specified and directed.

S&F for rolled section as main and cross beam, hip and jak rafters, purlins where connected to common rafters and running, rails, vertical members and guides for sliding doors, fixed with angle creats or other connecting plates etc confirming Fe-290, Gde E-165 complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth cources, string cources , lacing cources, parapets and railings upto 60 cm in height, copings, kneelers, apex stone, bed plates kerb, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

S&F for Framed work as grills, gratings etc ends of bars, shouldered and or riveted or forged in spikers, frame guard bars barred iron, doors, ladders, framed ballusters, walk ways, railling, frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F MS sheet cut to square or rectangular in any size with riveted, bolted or welded attachment, to any steel members such as angle, square bar etc, confirming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F for second class hard wood, transomes or mullions, straight for solid frames of any description, wrought, framed, rounded or chamfered (including weathering to trasome, if required put together with glue, pinned at joints, to making of riffle rack complete all as specified and directed.

S&F for 40 mm thick second class hard wood, boarding, fixed in any work, plain both side and edges tongued and groved or rebated fixed with nails or screws as in riffle rack complete all as specified and directed.

S&F for bands, straps, supports or stay for rainwater ventilating pipes, including bolts if requred hooks (stay) heavy for lage gates, hooks and pintle hinges large hasp and staples, chains, hand made sliding bolts, clamps, hold fastes, wall ties, hooks for hanging fans, plain angle cleat for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps plate washers and similar articles confirming to Fe-290 Gde-165 complete all as specified and directed.

M&L for 100 mm thick cement concrete, type B0 1:2:4 (12.5 mm graded stone aggregate) as in flooring, finish even and smooth with using extra cement complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces, nexc 10 cm width or girth when not connected with other painting surface or when painted in different tint and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed.

Excavation in trenches. exc 1.5m wide and n exc 1.5m depth for foundation etc or for shaft wells, cesspits, manhole, pier etc n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated material to a distance nexc 50 m direct at a level nexc 1.5 m above the starting point complete all as specified and directed.

M&L for cement concrete 75 mm thick, type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L non skid ceramic digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles complete all as specified and directed.

Description all as per srl item no. 39 here in before but as in skirting and dodo complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new undecorated surfaces of walls and applying two coat of cement based paint complete all as specified and directed.

M&L for TMT bar 10 mm dia and over cuto to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and bing with and including mild steel wire (annealed) not less than 0.9 mm dia or secring with clips complte all as specified and directed.

Description all as per srl item no. 44 here in before but 5 mm dia and over up to and including 10 mm dia in stirrups spaces and binders complte all as specified and directed.

M&L for use and waste of form work for side and soffit of floor or roof beam, beam hanchings, girders, bressummers, lintel beam, cantilevers, shelves including supports, over hanges, flat rough surface, etc complete all as specified and directed.

M&L for reinforced cement concrete nominal mix, type B-1, 1:2:4, using 20 mm graded stone aggregate as in lintel beam complete all as specified and directed.

M&L for frame work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hangling or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive for running rails and guides) and hanging also fastening and fixing, confirming to Fe-290 (Gde-E-165) complete all as specified and directed.

M&L for 35 mm thick factory made Second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete, all as specified and directed.

S&F butt hinges medium weight cold rolled mild steel 100 mm long, complete all as specified and directed.

S & F 200 mm long aluminium anodized barrel tower bolts of extruded sections and fixed complete all as specified and as directed.

S & F 150 mm long Aluminum alloy handles, fabricated type, anodized complete all as specified and directed.

S&F floor door stopper brass body and tongue with hard drawin steel spring, overall length of cover plate 150 mm dia, complete all as specified and directed.

S & F 300 mm long aluminum anodized sliding door bolts with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F for steel windows with side hung shutters including projecting type hinges with steel handles, and steel peg stay, complete with glazing bars, ovetailed or welded complete all as specified and dirceted.

Description all as per srl item no. 56 here in before but without glazing bars complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as directed.

M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, all as specified and as directed.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.

Providing & fixing false ceiling with fully perforated 12 mm thick micro tegular eged or 10 mm thic square edgd GRG false ceiling all heights with GRG (Glass fibre reinforced Gypsum) false ceiling tiles of size 595 x 595 of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 0.5 to 0.75 as per IS 8225 : 1987, Noncombustible (Fire resistant/retardant) as per BS-476 (Part-4)-1970, fire resistant/retardant and light relectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main 'T' runners of size 15 x 32 mm of length 3000 mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per Sqm) i.e 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully thread hanger rod upto 1000 mm length and L-shape level adjuster of size 85 x 25 x 2 mm, galvanized iron parimeter wall angle of size 24 x 24 x 0.40 mm of length 3000 mm to fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawings and as per directions of Engineer-in-Charge.

Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

M&L for circuit/submain wiring alongwith earth wire with the (2x1.5 sq. mm + 1x1.5 sq. mm earth wire) of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required in steel conduit with all accessories complete all as specified and directed.

S&F switch socket outlet 3 pin 5 amp flush type complete all as specified and directed.

S&F Exhaust Fan, Steel body AC single Phase 230 V of size 300 mm sweep with blades, frame and louvers complete all as directed and specified.

S&F Exhaust fan of 300 mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, Copper winding complete all as specified and directed.

M&L for Cutting openings through walls for door, window and other openings Circular 300 mm hole in 380 mm wall) or enlarging existing openings or cutting out defective masonry for under pinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as directed and specified.

Material and labour for point wiring OF One Light/Bell/Buzzer/fan/Exhaust Fan point controlled by one switch with cable 1.5 Sqmm complete with PVC insulated, FRLS type, unsheathed, multistranded, flexible,copper conductor cable 1.5 sqmm,1100 volts grade drawn through and including PVC conduit of suitable size at site with all accessories such as Tee,corner, overlaping connector etc.on surface walls, roofs and ceilings etc. with necessary fixing accessories and earth continuity conductor cable of size 1.5 sqmm green colour connected to common earth and earth dolly, including pressed steel terminal boxes (for modular accessories) concealed in wall covered with modular plate for mounting modular switch/ sockets/ fan regulators fixed with cadmium plated machine screws complete all as specified and directed.

Description all as per srl item no. 70 here in before but One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq. mm size.

Description all as per srl item no. 710 here in before One 3 pin socket outlet, 5 amps, independent, with cables 1.5 sq. mm size.

S&F Modular switch 1 way 6A, 1 module complete all as directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as directed.

Supply and fixing ceiling fans of 1200mm sweep, complete with blades, down rods, electronic regulator and accessories, 230 V, Minimum air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as required.

Supply and fixing LED lights fitting 1x16W, 220V, AC decorative box type with driver, holder including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed.

Material and labour for sub main wiring complete with (2x2.5 Sqmm+1x2.5 Sqmm earth wire) 2 run of 2.5 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC Conduit and accessories such as tee, corners, overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 2.5 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly complete and all as specified and directed. Note : - 02 run of 2.5 sqmm single core copper conductor cable and 01 run of 2.5 sqmm single core copper conductor and 01 run of PVC COnduit shall be measured as one unit.

Supply, fixing, installation and testing of inverter type split unit Air conditioner electric driven single phase of capacity 1.5 Ton, 5 star rating, copper condenser, indoor noise level <50db with standard fitment and outdoor unit fixed on wall mounted type bracket complete all as specified and directed. Make: Daikin/Hitachi/Bluestar/Carrier/Voltas/Havells(Lloyd)

ANKIT BUILDERS (BID ID -3095721)