Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance HPSEBL THALOUT | KANGRA | HIMACHAL PRADESH | 176201 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance WAISHTING PINES RESORT BHOTLA SHIMLA DISTT SHIM A | SHIMLA | HIMACHAL PRADESH | 171001 | Admitted-Finance |
| 5 | Not Admitted-Finance | Not Admitted-Finance Not qualified for AOC |
Tender Value
₹23.3 L
EMD Value
₹42,400
Closing Date
9 Jul 2020, 5:30 pmClosed
EE RDD
SDA Complex Block No 27 Kasumpati
C/O Building works i/c water supply and sanitary installation etc
2020_DRDPR_38313_2
23.06.2020
Open Tender
Civil Works - Buildings
Item Rate
365 days
Shimla
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
EE HQ RDD Shimla -9
₹42,400
10 Jul 2020
25 Jun 2020
10 Jul 2020
25 Jun 2020
9 Jul 2020
25 Jun 2020
Amount
Cutting in earth work and disposal of excavated earth upto a lead of 20 metres:-
( Pick + jumper work 50% each)
Chiselling of soft rock Where blasting probhitted
Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in- charge with in all leads , lifts and other incidentals complete in all respect .
Providing form work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five millimeters )so as to give a fair finish including centering , shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete work in .
Foundation ,footing basis of columns etc. And mass concrete as per direction of the Engineer-in-charge including carriage of material with in all leads , lifts in all floor levels and other incidentalscomplete in all respect .
Columns, pillars ,posts and struts square, rectangular or polygonal in plan as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals complete in all respect .
Rectangular column
Circular Column
Beams cantilever girders and lintels side and soffits of beams ,beams haunchings, cantilevers ,bressumers and lintels any depth in all heights from floor as per direction of the Engineer-in Charge including carriage of material with in all leads ,lifts in all floor levels and other incidentalscomplete in all respect .
Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness , all as per direction of the Engineer-in Charge including s carriage of material with in all leads ,lifts in all floor levels and other incidentals complete in all respect .
Stair cases with sloping or stepped soffits excluding landing.
Edges of slab and breaks in floor and walls under 20cm wide as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals complete in all respect .
Providing and laying, mechanically mixed and vibrated cement concrete 1:6:12 1 cement 6 sand 12 graded crushed stone aggregate 40 mm nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
Providing and laying cement concrete 1:1½:3 (one cement:one and half sand :3 graded crushed stone aggregate 20 mm (twenty millimeter) nominal size) mechanically mixed and vibrated graded crushed stone aggregate 20mm nominal size and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-
Foundation ,footing basis of columns etc and mass concrete as per direction of the Engineer-in-charge including carriage of material with in all leads , lifts and other incidentals complete in all respect.
Column , pillars , posts and structs as per direction of the Engineer-in Charge including carriage of material with in all leads and lifts and other incidentals complete in all respect.
Suspended Floors , roofs , landings shelves and their supports , balconies beams ,girders, bressumers and cantilever for all floors levels , complete as per direction of the Engineer-in Charge including carriage of material with in all leads ,lifts and other incidentals complete in all respect.
Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.
Providing tor steel reinforcement of TATA or SAIL make for reinforced Cement concrete work including bending, binding and placing in position and cost of binding wire complete for all floors including carriage of material with in all leads and lifts and other incidentals, complete in all respect.
Brick work using 2nd Class common burnt clay building bricks, in cement mortar 1:6( 1 cement 6 sand ) in super structure upto all floor levels including carriage of material with in all leads lifts and other incidentals, complete in all respect.
Half bricks masonry using second class common burnt clay building bricks in cement mortar 1:4(one cement :four sand )in super structure up to all floor levels including carriage of material with in all leads , lifts and other incidentals .
Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6( 1 cement : 6 Sand).
Stone soling / Boulder filling under floors including carriage of material with in all leads , lifts and other incidentals .
Providing wood work in frames of doors ,windows , clerestory, windows and other frames wrought, framed and fixed in position of sal wood including carriage of material with in all leads , lifts and other incidentals, complete in all respect.
Providing and fixing panalled shutters with 40 mm thick frame of first class deodar wood for doors and pannels of 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade including bright finished/black enamelled iron butt hinges with necessary screwsetc. complete.
Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 2nd class deodar wood 40 mm thick.
Providing and fixing glass panes with deodar wood beading and nails etc. complete. Plain Glass: 5 mm thick.
Providing 40 X 3 mm flat iron hold fast 40cm(forty centimeter) long including fixing to frame with 10mm(ten millimeter) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30 X 10 X 15 cm (thirty into ten into fifteen centimeter) 1:3:6 (one cement :three sand :six graded stone aggregate 20 mm nominal size), complete in all respect.
Providing and fixing mild steel plain M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws.
Providing and fixing Stainless steel sliding door bolts with nuts and screws etc. complete
Providing and fixing Stainless steel . tower bolts (barrel type) with necessary screws etc. complete.
200mmX10 mm
150mmX10 mm
Providing and fixing Stainless steel handles with the necessary screws etc. complete
Providing and fixing Stainless steel hooks and eyes. 150 MM
Providing and fixing 100mm bright finished brass floor Door stopers with rubber cushion screws etc to suit shutter thickness complete including carriage of material with in all leads and lifts, complete in all respect.
Providing and laying Kota stone slab flooring 25mm (twenty five milimeter) thick over 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per pattern approved by Engineer -in -charge including carriage of material with in all leads & lifts complete in all respect.
Kota stone slab 25 mm thick in risers of steps, skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of materials in all leads and lifts and upto all floor levels as per direction and to the entire satisfaction of Engineer-in- Charge.
Providing and laying spartic ceremic tiles 5.5 / 6.00 mm.thick in flooring (300 x 300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement.
Providing and fixing white Galzed tiles of size 450x300mm x 6mm (four hundred fifty x three hundred x six millimeter )thick in skirting risers of steps and dado on 12mm (twelve millimeter ) thick cement mortar 1:3 (one cement : three sand ) and jointed with cement slurry including carriage of material with in all leads lifts in all floors. The sample and pattern of tiles should be got approved from Engineer - in - charge before fixing. Nitco/ Kajariya /Somany or its equvalents
Providing and fixing 10mm ( ten mm) thick water proof stain and impact resistent heavy duty (full charge) vetrified tiles nitco or equivalent 600x600x10 mm thick manufactured of approved shade and colour in flooring treads of steps and landing over 12 mm ( twelve milimeters) thick cement mortar 1:3 ( one cement : three sand) and jointed with cement slurry including carriage of material with in all leads lifts complete in all respect.Nitco/ Kajariya /Somany or its equvalents
Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement. 40 mm Thick
Providing and laying marble work (table rubbed and polished) in flooring 20mm. thick base in cement mortar 1:3 (1cement : 3sand) including jointing with cement mortar 1:2 (1 white cement : 2 marble dust)with an admixure of pigment to match the shade of the marble. 20 mm.thick White makrana marble
Providing and fixing Unistone cladding on R.C.C. surface side as on faces of Arch masonry walls etc.on 12mm. thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete.
Painting two coats (excluding priming coat )on new steel and other metal surface with enamel paint other then white brushing to give an even shade including cleaning surface of all dirt dust and other foreign matter including entire carriage of material with in all lead lifts and other incidentals
Applying priming coat on new wood and wood based surfaces with ready mix paint brushing wood pink primer after and including preparing he surfaces by thoroughly cleaning oil grease dirt an other foreign matter sand papering and knotting etc complete including carriage of material with in all leads and lifts.
Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt dust and other foreign matter send papering and stopping with enamel paint other than white including carriage of material with in all leads and lifts
6mm thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand) as per direction of Engineer-in- charge including carriage of material with In all leads , lifts in all floors and other incidentals completes
15mm thick cement plaster in single coat on rough / fair side of brick /concrete/stone wall for interior / exterior plastering for all floors including arises internal rounded angles chafers and / or rounded angles chamfers and/ or rounded angles not exceeding 80mm (eighty millimeters )In girth and finished even and smooth in cement mortar 1:6 (one cement :six sand )as per direction of engineer in charge including carriage of material within all leads lifts in all floors and other incidental
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material with in all leads and lifts.
Distempering (two coats )with oil bound washable distemper of approved brand and manufacture and required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with alkali resistance primer of approved brand and manufacture after thoroughly brushing surface free from mortar dropping and other foreign matter and also including preparing the surfaces even and sand papered smooth i/c priming coat with distemper primer including carriage of materials with in all leads lifts and other incidentals complete in all respect.
Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/ stone/ plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for making the surface smooth.
Finishing wall with weather proof exterior grade emulsion of approved design (apexultima) or its equarlied on udecorated wall surfaces (Two Coats )to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etc. including sand paper smooth complete including carriage of material with in all leads and lifts.
Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground
Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)
Providing and fixing vitreous china wash down closet (European type W.C. pan) of Cera , Hindware or equvalent ) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) seat and cover to be measured and paid for separately anglo Indian universal closet as per direction and to entire satisfaction of Engineer-in-charge including carriage of material within all leads and lifts upto all floor levels.
Providing and fixing vitreous china wash down water closet squatting pan (Indian type W.C. pan) of Cera , Hindware or equvalent)of size 580mm (earth work bed concrete, trap to be measured and paid for seprately . Orissa pattern
PTMT Coloured / white / coloured high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) .
Providing and fixing white plastic seat (solid type) and cover for wash down closet with chromium plated brass hinges and rubber buffers complete including carriage of material with in all leads and lifts
Providing and fixing vitreous china wash basin of Cera, Hindware or equvalent with single hole for pillar tab with cast iron or steel brackets painted white including cutting holes and making good the same but excluding the fitting including cost of carriage of materials upto all leads and lifts in all floors Flat back 550 X 400 mm.
Providing and fixing 32 mm dia (thirty two millimeters ) chromium plated brass waste for wash basin or sink including cost of carriage of material upto all leads and lifts in all floors.
Providing and fixing PTMT grating round of approved quality and colour 100 mm nominal dia.
Providing and fixing CP brass bib tap with wall flange ( superior or heavy quality of ESS ESS, Jaguar or equvalent make) 15mm (fifteen millimeters ) dia with capstan head complete including carriage of material with in all leads lifts in all floors levels etc. complete
Providing and fixing 15mm dia ( fifteen millimeters) chromium plated brass pillar tap with capstan heads of ESS ESS, Jaguar or equvalent make complete in all respects including carriage of material with in all leads lifts in all floors
Providing and fixing CP brass angle valve 15mm (ESS ESS, Jaguar make or equvalent) in all respects including carriage of material with in all leads lifts in all floors
Providing & Fixing Mixer for Kitchen sink of ESS ESS, Jaguar makle or equvalent with casted swing spout at top.
Providing and fixing 600 mmx 450 mm ( six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass mounted on 6 mm (six millimeters) thick A.C sheet or plywood sheet and fixing to wooden plugs with chromium plated brass screws and washers complete including carriage of material upto all leads and lifts in all floors
Providing and fixing CP brass towel rail / ring (ESS ESS, Jaguar make or equvalent)complete with CP brass brackets fixed to wooden plugs with CP Brass 600 mm X 20 mm dia (six hundred millimeters into 20 milimetre) complete including cost of carriage of materials upto all leads and lifts in all floors
Providing and fixing toilet papers holders chromium plated brass complete including carriage of material upto all leads and lifts in all floors
Providing and fixing PTMT Zet sprayer with 1.5 mtr tube including carriage of material with in all leads and lifts
Providing and fixing PVC connection with brass union 300 / 450 mm length 15mm size.
Providing and fixing brass Full way valve with steel wheel including carriage of material with in all leads and lifts
15mm (fifteen millimeters)nominal bore
20mm(twenty millimeters)nominal bore
Providing and fixing to wall ceiling and floor gal vanished mild steel tubes (medium grade) tube fitting and clamps including making good the wall and ceiling and floor complete including carriage of material upto all leads in all floors
15 mm (fifteen millimeters) nominal bore
20 mm (twenty millimeters) nominal bore
Providing and laying 20mm (twenty millimeters) nominal bore in trenches gal vanished mild steel tube of TATA Or Jindel or Equvalent (medium grade) tube fitting earth work in trenches tube measured and paid for separately complete including carriage of material upto all leads and lifts in all floor
Providing and fixing PVC water storage tank of Sintex or equvalent make of ISI :12701 Marked ,G.I. inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground Level (1000 litres net capacity tank)including carriage of material upto all leads and lifts in all floor
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive ,cost of cutting and making good the wall and floors etc. complete 110 MM X 75 MM including carriage of material upto all leads and lifts in all floor
Providing and fixing PVC P/S trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110 MM including carriage of material upto all leads and lifts in all floor
Providing and fixing high pressure (Phinolix or equivalent) PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.
75 mm nominal size (seventy five millimeters) size
110 mm nominal size (one hundred ten millimeters) size
Providing and fixing (Phinolix or equivalent) PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete
75 MM (Seventy five millimeters Dia )
110 MM (one hundred ten millimeter Dia )
Providing and fixing (Phinolix or equivalent) PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete.
75 MM (Seventy five millimeters Dia )
110 MM (one hundred ten millimeter Dia )
Providing and fixing (Phinolix or equivalent) PVC collars ISI marked including fixing with approved adhesive etc. complete.
75 MM (Seventy five millimeters Dia )
110 MM (one hundred ten millimeter Dia )
Providing and fixing (Phinolix or equivalent) PVC plain bend ISI marked including fixing with approved adhesive etc. complete
75 MM (Seventy five millimeters Dia )
110 MM (one hundred ten millimeter Dia )
Constructing brick masonary chamber for under ground C.I inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement: five sand)C.I cover and frame( light duty) 355x610mm internal dimension total weight with cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg ) RCC top slab with 1:2:4 mix (one cement: two sand: four graded stone aggregate 20mm nominal size) 1:5:10 (one cement : five sand: the graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3(one cement: three sand) finished with a floating coat of neat cementon wallsand bed concrete etc complete including curing complete. including carriage of material upto all leads and lifts in all floor
Inside dimensions 455mm x610mm x450mm deep for single pipe line
Inside dimensions 600mm x850mm x450mm deep for pipe line with three or more inlets
Providing and fixing vitreous China bowl pattern urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately. :
Flat back type of size 430mm x 260 mm x 350mm.
Providing and fixing vitreous china division platefor urinals including carriage of material upto all leads and lifts in all floor
Providing and fixing C.P. brass flush pipe / spreaders for urinal with fitting such as unions, clamps etc. (all in C.P. Brass) including cutting holes and making good the same :- 15 mm nominal bore.
Providing and fixing PTMT Coloured / white automatic flushing cistern with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately). 5 litres net capacity.
Providing and laying C.I manhole cover 50cm dia including carriage of material with all leads and lifts and other incidentals
Providing and laying 200mm cast iron rungs with chequred or ribited non soli surface including and fixing in main holes with 200x200x200mm cement concrete 1:3:6 stone of 20mm nominal size including carriage of material with all leads and lifts and other incidentals
VED PRAKASH THAKUR
Dakshesh Infra Solution Pvt Ltd
INDER SINGH
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .