Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 LAccepted-Finance 151 PHASE II INDUSTRIAL AREA CHANDIGARH CHANDIGARH 160101 | CHANDIGARH | CHANDIGARH | 160101 | ₹7.1 L | L1 | Accepted-Finance Agency found L1 |
| 2 | L2₹7.8 L+₹69,800.36 (9.80%)Rejected-Finance 1627 SECTOR 26 PANCHKULA | ₹7.8 L+₹69,800.36 (9.80%) | L2 | Rejected-Finance Agency not found L1 |
| 3 | L3₹8.0 L+₹89,353.94 (12.5%)Rejected-Finance M S A K ENTERPRISES C P DIVISION NO 6 SECTOR 9 D U T CHANDIGARH B 12 2723 ADARSH NAGAR NAYA GAON MOHALI PUNJAB | CHANDIGARH | CHANDIGARH | 160001 | ₹8.0 L+₹89,353.94 (12.5%) | L3 | Rejected-Finance Agency not found L1 |
| 4 | L4₹10.7 L+₹3.5 L (49.7%)Rejected-Finance H NO 1194 PUSHPAK COMPLEX SECTOR 49 CHANDIGARH | ₹10.7 L+₹3.5 L (49.7%) | L4 | Rejected-Finance Agency not found L1 |
Tender Value
₹11.9 L
EMD Value
₹23,701
Closing Date
24 Jul 2026, 2:00 pmClosed
Executive Engineer C P Division No 5 Chandigarh
Executive Engineer C P Division No 5, Deluxe Building Ground floor Sector 9 D Chandigarh
Special Repair for Non Residential Building of Chandigarh Secretariat Building, Plot No.7, Sector 9-D, Chandigarh for the year 2026-27.
2026_CHD_94100_1
EECP5/2026/2962767 dated 17.07.2026
Open Tender
Civil Works
Percentage
210 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹23,701
4 Aug 2026
17 Jul 2026
24 Jul 2026
17 Jul 2026
24 Jul 2026
17 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : DSR 8.28 | |||||
| 1.01 | Decorative veneer facings of approved manufacture DSR 8.28.1 | 20 | Sqm | 1,893.7 | ₹37,874 |
| 2 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete. DSR 9.149 | 20 | each | 224.81 | ₹4,496.2 |
| 3Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. DSR 9.105 | |||||
| 3.01 | 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks) DSR 9.105.1 | 40 | Sqm | 2,073.56 | ₹82,942.4 |
| 4Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. DSR 11.41A | |||||
| 4.01 | Double charge vitrified tile polished finish of size DSR 11.41A.1 | - | - | - | - |
| 4.02 | Size of Tile 800 x 800 mm DSR 11.41A.1.2 | 30 | Sqm | 1,493.41 | ₹44,802.3 |
| 4.03 | Size of Tile 1000 x 1000 mm DSR 11.41A.1.5 | 30 | Sqm | 1,753.05 | ₹52,591.5 |
| 5Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.L channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.L intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.L wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : DSR 12.45 | |||||
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.44 MB
BOQ_115368.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .