DAY TO DAY MAINT/COMPREHENSHIV REPAIR TO MD ACCN AT

Amount

S & F in repair stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including fixing with new nut bolt and refix old flat iron over wiremesh.

S & F in repairs 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S & F in repairs Mild steel Drawers handles, projections drop (50mm to 65mm) on screwed plate

S & F in repair 25mm dia Harrison rails/curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete as in repair.

S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. Including taking down complete all as specified

Refixing old steel tubing and connections 15mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed Including taking down complete all as specified

S&F GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed.including taking down complete all as specified

Refixing old steel tubing and connections 20mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and as directed Including taking down complete all as specified

S & F in repair Sintex water tank cover (Dhakkan) tied with wire for 500 and 1000 Ltr capacity water storage tank.

S & F in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F in repair 15mm dia Stop valves, cast copper alloy chromium plated fancy type , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. make Prayag or eqvl.

S & F in repair CP Grating With Hole/ Without Hole 100mm dia fixed with cement.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm

S & F in Repairs of rubber washer for stop cock, bib tap, Pillar tap ,gate valve of any type all as specified and directed

S & F in repairs Peg stays to steel windows.

S & F in repair mild steel handles to steel windows all as specified and directed

S&F in repair 32mm bore PVC waste down take pipe 900 to 1000mm fixed in WHB.

S&F in repair 40 mm bore PVC waste down take pipe 900 to 1000mm fixed in sink.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.in cluding taking down complete all as specified

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.in cluding taking down complete all as specified

S & F 75 mm bore PVC (SWR) bends of any radius.

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 75 mm bore PVC (SWR) Vent Cowl.

S & F 110 mm bore PVC (SWR) Vent Cowl.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as spd

S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed

S&F in repairs 40 mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed

S&F in repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets. complete all as specified and as directed. Make : cera or its equivalent

S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete. make cera or equivalent

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

S&F in repair Stop valve cast copper alloy screwed down high pressure with capston headed handle chromium plated concealed type screwed both ends for iron pipe 15 mm bore or for unions

S&F in repair C.P bib taps cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule complete fixed in repair.

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC.

S&F in repair glass self assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket gaurd and railing 60 Cm long all as specified.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete.

S&F in repairs Door seal (Snake guard) with Aluminium frame powder coated up to 900 to 1000mm door opening complete all specified

S&F in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm without pedestal, cutting for and pinning ends of brackets or erecting stand including CP coupling 32mm dia complete all as specified.

S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white incl P or S trap and in cluding plastic seat cover etc (excluding flushing cistern and flush pipe) complete all as specified and as directed

S&F in repairs vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and complete all as specified and as directed

M&L for joint free Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 including dismantling of tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

M&L for joint free Non - skid Ceramic Coloured tiles 7 to 8 mm thick (square/rectangular) joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on wall. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick backing layer in CM 1:4 including dismantling of tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

M&L for non skid/mat finish ceramic colour tiles of size 300 mm x 300 mm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:4) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Joint free Glazed ceramic Coloured tiles in vertical/dado surface 450mmx300mmx7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick rough cement plaster to receive tiles in CM 1:4 including dismantling of tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified

Demolition of Cement concrete in ground floors and pavings nexc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over applying of 1-2 mm thick wall care putty finish wall surface even & smooth all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over complete all as specified and as directed.

M&L for applying two coats of Synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of walls including corners and applying two coats of distemper oil emulsion over applying of 1-2 mm thick wall care putty finish wall surface even & smooth all as specified and directed.

M&L for Preparing old surface of wall including corners and applying two coats of distemper oil emulsion finish wall surface even & smooth all as specified and directed.

M&L for complete removal of existing treatment on ceiling and applying three coats of white wash on ceiling, off sets, pillar etc all as directed and specified.

M&L for preparation of old painted surfaces of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces/concrete surface of any description including preparation of steel surfaces complete all as specified and directed.

M&L for preparation of old plastered or unplastered ,old decorated surfaces of wall surface and applying one coat of Cement Base Paint complete all as specified and directed.

M&L for preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer

Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltr complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from over head water tanks and from mouths of circulating pipes of capacity exc 500 ltr but not exc 1000 ltr complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 15mm Flot Ball Valve dismantling of old PVC/RCC water tanks complete all as specified.

All as per srl item No 66 here-in-before but water storage tanks of 1000 ltrs capacity

S & F in repair low level flushing cistern of syphonic action type 10 ltr capacity PVC fixed to wall with bracket and screwed including PVC flush pipe complete fitting including taking out unserviceable flushing cistern and flush pipe etc.

Taking down shutters of any description n.exc 1 sqm and refixing in same opening after easing, adjusting and replacement of minor nails etc, complete all as specified and directed.

All as per serial item No 69 here-in-before but exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

Resecuring or easing & adjusting, without taking down shutter of any description nexc 1 sqm each complete all as specified and directed.

All as per item ser No 71 here-in-before but exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm and n.exc 4 sqm each (without taking off shutters from the frame) and removing from the site complete all as specified and directed.

All as per ser Item No 73 above but n.exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each and removing from the site complete all as specified and directed.

M&L for Pressed steel door frame of size 105x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

M&L for Pressed steel door frame of size 125x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

S&F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick flush shutters, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified and directed.

S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed.

S&F MS Butt Hinges medium weight, cold rolled mild steel 100 mm fixed to steel/wooden shutters complete all as specified and directed.

S&F mild steel barrel tower bolts 150 mm size, stove enamelled black, with bright bolt fixed in repairs complete all as specified and directed.

S&F mild steel pressed handles 150 mm size stove enamelled black complete fixed complete all as specified and directed.

S&F mild steel sliding door bolts 'bolt type' 250 mm size stove enamelled black with and including 6 nuts and bolts complete fixed in repairs complete all as specified and directed.

S&F in repair Plain fillets 2nd Class hardwood not exc 3 sq. cm, square, rectangular or triangular in section, chamfered or rounded on one edge or face, secured with nails and fixed complete all as specified and directed.

S&F in repairs cast iron body hydraulic door closers universal type designation No 3 suitable for door shutters of 851 to 1000 mm wide complete all as specified and directed.

S&F in repair 150mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair MS Rat tail pattern/ helical doors spring 150 to 200 mm, ordinary springs including roller and roller plate complete all as specified and directed.

Supply & fix in repairs stainless steel peg set of five with chromium plated back plate 304 grade, 40mm wide fixed with chromium plated screw complete all as specified and directed.

S&F in repairs 40 mm dia, cupboard knobs fixed with nut, screw and washer of stainless steel, bright finished complete all as specified and directed.

S&F in reapir magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

S&F in reapir Continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed complete all as specified and directed.

Description all as per serial item No 97 here-in-before but frosted glass complete all as specified and directed.

M&L for Securing old glass of any description in existing steel/wooden frames glazed with putty/beads including removing loose or decayed putty/beads, reputtying to match existing work etc. and fixed complete all as specified and directed.

Taking down Aluminium door shutters / Partition hung type/sliding type /fixed any size and refixing in the same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks, hydraulic door closer, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed Note: Replaced of any item shall be paid and measured seperately as Supply & Fix.

Taking down Aluminium window shutters hung type/sliding type /fixed any size and refixing in the same opening including making petty repairs as required incl cleaning and repair/replacement of beadings, glazing clips, stoppers, rubber beading, locks, stays, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed Note: Replaced of any item shall be paid and measured seperately as Supply & Fix.

S & F in repair door closer Aluminium die cast body Hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and as dierected.

S&F in repairs Floor door stopper of SS/Brass body and tongue.anodized with hard drawn steel spring fixed in floor(length of cover plate 150 mm)

S&F in repairs corner glass shelves 225mm fixed to wooden plugs with chromium plated brass screws and cup washers complete. Make:Cera or equivalent..

S&F in repair stainless steel kitchen plate rack made of 1.00 mm thick sheet of size 24"x24" incl shelves, rod to put plates etc and fixed to wall complete all as specified.Make:Nirali or equivalent.

S&F in repair stainless steel soap dish, any type fixed to plugs chromium plated brass screws complete.Make:Cera or equivalent.

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed.Make:Cera or equivalent.

S&F PVC (SWR) floor trap plain with grating lincluding jointing with solvent cement 75mm dia all as specified.

S&F in repairs towel Ring round with round flange of brass chromium plated including brackets. complete all as specified and as directed.Make:Cera or equivalent.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed.Make :Nirali or equivalent

Preparing surface of sunken slab in toilet flooring and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. including , laying and testing of bituminous coating system based on bituminous emulsion, including application of one coat of primer and laying of app membrane as per manufacturer specification in sunken portion with and including sunken floor shall be filled with brick concrete 1:4:8 as per existing thickness ,a pipe of dia 40mm 600mm long GI spout incl. fitting in floor and incl.demolition of floor complete all as specified.

Sch 'A' E/M Work:- M & L for point wiring in repair for light / fan controlled by one switch with 1.50 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable in existing PVC concealed conduit terminated in new anodise pressed steel sunken box of approved thickness with ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed boxes, including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour including taking down of old existing wiring any type and all as specified .Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green).

All as per Srl item No 112 here-in-before but for call Bell point complete all as specified and directed .

All as per Srl item No 112 here-in-befor but for 5 pin 5 amps socket outlet or independent board complete all as specified and directed.

All as per Srl item No 112 here-in-befor but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M & L for point wiring in repair with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable in existing PVC concealed conduit terminated in new anodised pressed steel sunken box approved thickness with ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed piping ,including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour including taking down of old existing wiring any type and all as specified .Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green).

M & L for point wiring in repair with 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable in existing PVC concealed conduit terminated in new anodised pressed steel sunken box approved thickness with ISI marked bakelite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 4 sqmm PVC insulated unsheathed multistrand copper conductor FRLS as earth continuity conductor connected to common earth dolly including, cutting chiseling for concealed piping ,including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour including taking down of old existing wiring any type and all as specified .Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green).

S & F in replacement switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S & F in replacement switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S & F in replacement socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S & F in replacement switch Bell push, flush type, 5 amp one way complete all as specified and directed by Engr-in-charge.

S & F in replacement ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S&F in replacement modular switch 1 way 6 A, 1module comlete all as directed.

S&F in replacement modular switch 1 way 16 A, 1module comlete all as directed.

S&F in replacement modular socket 6A/16A, 2/3 pin combind, 2module comlete all as directed.

S&F in replacement modular bell push 6 A, 1module comlete all as directed.

S&F in replacement modular fan regulator 6 A, 1module comlete all as directed.

S&F in replacement modular metal flush box, 3module comlete all as directed.

S&F in replacement modular metal flush box, 4module comlete all as directed.

S&F in replacement modular metal flush box, 6module comlete all as directed.

S&F in replacement modular metal flush box, 8module comlete all as directed.

S&F in replacement modular metal flush box, 12module comlete all as directed.

S&F in replacement modular white cover plate with frame, 3module comlete all as directed.

S&F in replacement modular white cover plate with frame, 4module comlete all as directed.

S&F in replacement modular white cover plate with frame, 6module comlete all as directed.

S&F in replacement modular white cover plate with frame, 8module comlete all as directed.

S&F in replacement modular white cover plate with frame, 12module comlete all as directed.

S & F in replacement lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S & F in replacement of Bell Ding Dong, AC 230 Volts single Phase complete all as specified and directed by Engr-in-charge.

S & F in replacement ceiling rose 65 x 50mm three terminals complete all as specified and directed.

S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of suitable size complete all as required at site or directed.

S & F in replacement of LED Lamp, B22 type ,12 watt,complete all as specified and directed.

S & F in replacement energy saving decorative LED 20W box type (4 Feet), frame , light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired without tube and making connections with 3 core twisted flexible copper cable of suitable size from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge.

S & F in replacement LED Bulkhead fitting 10 watt all as specified and directed by Engr-in-charge.

S&F in replacement LED decorative wall light fixturemade up of polycorbonate, suitable for retro fit LED Lamp alongwith 12W LED lamp complete all as specified and as directed.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing MS ventilating fans Single phase, 230 volts 300 mm or 12” H.D EX Fan (900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated suitable size copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing PVC type AC ventilating fans Single phase, 230 volts 250 mm Fan (900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated suitable size copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.

S & F in replacement 20mm Rigid non-metallic PVC conduit heavy duty exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

S & F in replacement of existing unsv sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps 'C' curve complete all as specified and directed .

S & F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

S & F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

M & L in replacement for MCB SP 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

M & L in replacement for MCB SPN 240 volts any rating from 6 to 40 amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

M & L in replacement for MCB SPN 240 volts any rating 63 Amps, 'C' cruve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 6 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed.

All as per srl item No 156 here-in-before but submain wiring with 2 single core 4 sqmm and one 4 sqmm as eathing lead complete all as above but 4.00 Sqmm

S & F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 63 AMPS AC 415 VOLTS 25 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing. ( (i) MCCB, MCB and DB should be of same make. (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

S & F in replacement bldg secuirty light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 25 mm dia bent to shape having length on less than 0.9 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.

S&F in replacement MCCB 4 Pole 100 Amps, thermal magnetic release having, breaking capacity 25 KA, 415 Volt in the existing TPN DB including any addition / alteration to the DB to accommodate the new MCCB and connections complete all as specified and as directed by Engineer-in-Charge.

Maintenance of storage type electric water heater capacity 25/50 Ltrs comprising of the following activities : - (a) Taking down by disconnecting electric and water connection and making visual inspection opening and dismantling, de-scaling, brushing and cleaning of storage tank of any type and checking of each item for its servicieability and reasssemebed the same after necessary repair and testing complete all as specified and directed. (b) Checking the earth continuity of gysers water heater and accessories, complete all as specified and directed. (c) Visual examination of fusible plug, complete all as specified and directed.

S&F in replacement PVC flexible copper cable sheathed 3 core, 2.5Sqmm, universal colour code, complete all as specified and directed by Engineer-in-charge.

S&F in replacement heating element 2.0 KW & testing of electric connections as per site requirement, complete all as specified and directed.

S & F in replacement thermostate of 25/50 Ltrs capapcity, 250Volts,AC and testing complete all as specified and directed.

S & F in replacement PVC connection of size 15mm dia and 450mm long superior quality for Geyser, complete with brass adopted for Geyser hot/cold, complete all as specified and directed.

S&F in replacement metalclad plug top 20Amps,complete all as specified and directed.

S&F in replacement Plug top 15Amps,complete all as specified and directed.

S & F in replacement syphon assembly complete for 25 Ltrs capacity Geyser as exisiting on ground complete all as specified and directed.

S&F in replacement indicator lamps to Geyser of any make type & capacity complete all as specified and directed.

S&F in replacement inner tank of Geyser of capacity 25Ltrs of suitable size as per site requirement, make of steel as per exisitng gauge, complete all as specified and directed.

S&F in repair pressure release valve of geyser (ISI marked) of 15mm dia with rubber washer as per site requirement, complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).

S & F in replacement Gang Box for 15 Amp Switch socket combined including 15Amp combiation complete all as specified and directed by Engr-in-charge.

S & F in replacement Gang Box for 5 Amp Switch socket combined including 5Amp combiation complete all as specified and directed by Engr-in-charge.

S & F in replacement Hylum sheet 4x4 to 4x6 inches for fixing of switchs sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed by EIC

S & F in replacement Hylum sheet 6x10 to 8x10 inches for fixing of switchs sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed by EIC

Taking down carefully 1200/1400mm sweep ceiling fan any make from the hook of OTM/MD Accn carrying to the wksp including rehanging the same at existing position after cleaning, greasing and connecting up with PVC insulated copper flexible wire 3 x single core 1.0 Sqmm from ceiling rose to connector of fan complete all as specified and directed by Engr-in-Charge . NOTE :-1. PVC copper flexible wire 1.0 Sqmm single core( 3 runs each) shall be measured and paid separately under relevant item. 2. Total service time from taking down to rehanging must not exceed 3 Days . 3. T&P such as ladder and vechicle will be provided by contractor at their own expense .

Strip opening of ceiling fan 1200mm sweep and carrying out rewinding with proper grade/guage super enamelled copper winding wire so as to achieve original specifications i.e current rating and RPM (RPM test of ceiling fan with suitable tachometer will be done by contractor and shown to deptt , tachometer will be provided by contractor at their own expense) and all insulating materials (spares will be used and measure in respective items) and reasembling etc complete all as specified and directed by Engr-in-Charge. Note :- 1.Under liability period ,in case winding or any accessory i.e capacitor, becomes non functional, it will be repaired without any extra cost within 5 days of complaints received.

S&F ball bearings suitable for ceiling fans/exhaust fans of size 6201 complete all as specified and directed by Engr-in-Charge complete

All as per srl item No. 179 here-in-before but of size 6202 complete.

All as per srl item No. 179 here-in-before but of size 6203 complete.

All as per srl item No. 179 here-in-before but of size 6204 complete.

Taking out existing defective/worn out condenser any size/make and material and labour for condensor of capacity 2.5 mfd ,220 V including making connections etc complete all as specified and directed by Engr-in-Charge.

All as per srl item No.183 here-in-before but of capacity 3.15 mfd capacity.

All as per srl item No.183 here-in-before but of capacity 1.5 mfd capacity.

M&L for rewinding of stator assembly of exhaust fan/bracket fans/wall mounting fans/pedestal fans 225 to 300mm sweep after strip opening of motor with proper grade/guage of super enamelled copper wiring so as to achieve original specifications i.e current rating and RPM including all insulating materials, re-assembling and replacement of worn out nuts, bolts, rubber bushes, clamps etc complete all as specified and directed by Engr-in-Charge. Note :- Taking down cleaning, greasing and re-fixing in position shall be measured and paid under srl item No.14 here-in-before. Note :-1. RPM test of exhaust fan with suitable tachometer will be done in the presence of Engr-in -Charge. 2. No T&P will be provided by the Dept. 3.Warranty period is 1 year,in case winding or any accessory i.e capacitor, ,becomes non functional within 1 year , it will be repaired without any extra cost within 5 days of complaints received.

Taking out existing worn out rubber reel, clamp and supply & fixing of rubber reel with clamps, MS nuts, bolts heavy duty of suitable size for hanging of ceiling fan to hook etc complete all as directed.

Taking out rusted screws & M&L for screws for fixing to different type/make blades of ceiling fans complete.

Taking out worn out/cracked canopy and supply & fixing canopy with screws to the celing fans of any size/make etc complete. (Set of 2 pieces)

Taking out rusted/worn out threaded down rod and supply & fixing down rod made out of 15 mm dia medium grade GI pipe having one side thread and on other side hole or both side threaded/hole 1.0 feet long complete.

Taking out existing defective flexible wire of any size and M&L for PVC copper cable flexible 3 core 1.0 Sqmm 1100 volts (FR) three core fixed to ceiling fan/exhaust fan (not more than 1.0 Mtrs to each fan).

Taking down worn out blades of exhaust fan off size 225 to 300mm sweep and supply and fixing new blades as per sample and make to the fan refixing in existing position etc complete.

Attending of complaints to continue electric supply after rectify the faults like no light, short circuit, sparking, current leakage etc including providing of small piece of electric wires if required of size upto 4 Sqmm single core and length n.exc 1 mtr complete all as specified and directed by Engineer-in-Charge. Note:-(i) any accessories found unserviceable will be replaced and shall be paid under respective items. (ii) one job will be considered for each bldg/Qtr per day irrespective of the No. of complaints.

Note - Rate quoated above all items inclusive provision as under :Making arrangement for establishment of centralized complaint centre in a building authorised by Engg-in-Charge upto the contract period with following arrangements:- (a) Infrastructure required in Complaint cell i.e. telephone, furniture, stationary, transport and other necessary items/materials to establish a new complaint centre able to receive and manage complaints from the users by all means ie Manual complaint mechanism, Telephonic complaints mechanism, SMS complaint Mechanism and e-mail complaint mechanism and to maintain a consolidated list of complaints and its redressal mode indicating all its relevant data. (b) Computer data operator shall be able to manage all the necessary activities and having qualification minimum 10+02 or Equivivalent in any discipline with minimum 6 month certificate course of computer applications (from a Govt recognized institute), (c ) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract (d) Provision of communication facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints simultaneously or on before closing the complaint cell on every day. (g) Provision of motorized conveyance for deployment to all tradesmen under this contract. (h) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone (j) On lodging the complaint, the Complaint No will be assigned for reference . Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen. (k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint.

(l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending , probable time required for attending the pending complaints etc (m) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (n) AGE will visit the complaint cell at least twice a week and GE at least once a weak to check the efficacy of the system and record their remarks accordingly. Note : Contractor shall be responsible for followings :- (i) Installation of landline telephone connection with internet broadband facility, obtaining SIM cards for mobile phones for supervisor and workers, deployed by the contractor. (ii) Payment of telephone bills, internet charges, mobile bills, expenses etc shall be borne by the contractor and no claim whatsoever on this account will be admissible by the department. (iii)A Computer/PC System with internet Connection for the Complaints lodging and Supervising will be Provided by the Contractor and will not be paid Seperately. (iii)Space for complaint cell/Office & Store will be Provided by the Department. And for any Security Breach/Theft Activity department will not be responsible. Contractor Have to arranged All Security Things By Self. (iv) Contractor will download the web application and understand its procedure and expedite accordingly

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 1,14,717.00 and any other reduction if any from quoted amount.

VAISHNAVI BUILDERS (BID ID -3327769)