REPAIR OF INTERNAL ELECTRIFICATION WORK AT NEW CANTT UNDER GE WEST PRAYAGRAJ.

Amount

Taking down carefully point wiring of any type complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, surface conduit/casing caping/conceal etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified & directed.

M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade concealed conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed conceal surfaces complete all as specified and directed for the following :- Note:(a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface.

One light/fan/bell point controlled by one switch

One point for socket outlet 5 amps on independent board

One point for socket outlet 5 amp same board

One bell/ buzzer point controlled by one push button on the same board with other switches or independent

One 3 pin socket outlet 15 amps, independent, with cables 2.5 sq. mm size on independent board.

One 3 pin socket outlet 15 amps, independent, with cables 4.0 sq. mm size on independent board.

M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 Sqmm (nominal area) along with same size and type of wire as continuous earth wire connected to common earth dolly drawn in and including non metallic PVC casing and caping not less than 20mm wide med grade ISI marked complete with all fixing accessories including factory made pressed steel concealed terminal box of required size of 1.2mm thick duly painted with 3mm thick plastic laminated sheet top cover with brass screw and cup washers complete all as specified and directed for the following :- . Note:(a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface.

One light/fan/bell point controlled by one switch

One point for socket outlet 5 amps on independent board

One point for socket outlet 5 amp same board

One bell/ buzzer point controlled by one push button on the same board with other switches or independent

One 3 pin socket outlet 15 amps, independent, with cables 2.5 sq. mm size on independent board.

One 3 pin socket outlet 15 amps, independent, with cables 4.0 sq. mm size on independent board.

M&L in replacement for concealed sub main wiring using FRLS PVC insulated, unsheathed stranded copper conductor cable two single core of following sizes of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm as earth continuity conductor complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.

2 run of 2.5 Sqmm & one run of 2.5 Sqmm as earthwire

2 run of 4 Sqmm & one run of 4 Sqmm as earthwire

2 run of 6 Sqmm & one run of 6 Sqmm as earthwire

2 run of 10 Sqmm & one run of 10 Sqmm as earthwire

4 run of 10 Sqmm & one run of 10 Sqmm as earthwire

M&L for surface sub main wiring using FRLS PVC insulated, unsheathed stranded copper conductor cable two single core of following sizes of voltage rating upto and including 1100 volts drawn in and including non metallic PVC rigid, medium grade not less than 20mm dia surface conduit / non metallic PVC casing and caping with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm as earth continuity conductor complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.

2 run of 2.5 Sqmm & one run of 2.5 Sqmm as earthwire

2 run of 4 Sqmm & one run of 4 Sqmm as earthwire

2 run of 6 Sqmm & one run of 6 Sqmm as earthwire

2 run of 10 Sqmm & one run of 10 Sqmm as earthwire

S & F in replacement of switch piano flush button type 5 amps single pole one way complete all as specified & directed

S & F in replacement of switch piano flush button type 15 amps single pole one way complete all as specified & directed.

S & F in replacement of socket outlet multipurpose 2/3 pin 5 amps flush button complete all as specified & directed.

S & F in replacement of socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified & directed.

S & F in replacement of 15 Amps switch socket combination 240V complete all as specified & directed

S & F in replacement of ceiling fan regulator step type 240 Volt AC complete all as specified & directed

S & F in replacement bell push flush type 5 amps complete all as specified and directed.

S & F in replacement ceiling rose surface type complete all as specified and directed.

S & F in replacement angle/batten type lamp holder, PVC/Polycarbonate type with back plate complete all as specified & directed.

S & F in replacement of call bell, ding dong type, AC, 230 V, single pole complete all as specified & directed.

S & F in replacement single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20/25 Amps "B" Curve. Complete all as specified and directed.

S&F in repair switch modular flush type 10 amps, single pole, one way 230 volt complete all as specified & directed.

S&F in repair socket modular flush type 2 in 1 suitable for 10 amp, 5 pin ,230 volt complete all as specified & directed.

S&F in repair switch modular flush type 20 amps, single pole, one way ,230 volt complete all as specified & directed.

S&F in replacement of modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module complete all as specified & directed.

S&F in replacement of modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, 1/2 module including connection complete all as specified & directed.

S&F in replacement of modular metal flush box of 12 module complete all as specified and directed.

S&F in replacement of modular metal flush box of 8 module complete all as specified and directed.

S&F in replacement of modular metal flush box of 6 module complete all as specified and directed.

S&F in replacement of modular metal flush box of 4 module complete all as specified and directed.

S&F in replacement of modular metal flush box of 3 module complete all as specified and directed.

S&F in replacement of modular white plate cover with frame of 12module complete all as specified and directed.

S&F in replacement of modular white plate cover with frame of 8 module complete all as specified and directed.

S&F in replacement of modular white plate cover with frame of 6 module complete all as specified and directed.

S&F in replacement of modular white plate cover with frame of 4 module complete all as specified and directed.

S&F in replacement of modular white plate cover with frame of 3/2 module complete all as specified and directed.

S&F in replacement of modular bell push flush type 6 amp, 1 module SP , 230V AC complete all as specified & directed.

S&F in replacement of MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F in replacement of MCB single pole & neutral 40/63 amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.

Supply & fixing in replacement of worn out/rusted sunken box of size 100 mm X 100 mm with pressed MS/GI steel terminal boxes of depth not less than 50 mm, flush type of thickness lot less than 1.22 mm of following size along with new 3.0 mm thick plastic laminated sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all respect as specified and directed.

Supply & fixing in replacement of worn out/rusted sunken box of size 175 mm X 100 mm with pressed MS/GI steel terminal boxes of depth not less than 50 mm, flush type of thickness lot less than 1.22 mm of following size along with new 3.0 mm thick plastic laminated sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all respect as specified and directed.

Supply & fixing in replacement of worn out/rusted sunken box of size 200 mm X 150 mm with pressed MS/GI steel terminal boxes of depth not less than 50 mm, flush type of thickness lot less than 1.22 mm of following size along with new 3.0 mm thick plastic laminated sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all as specified and directed.

Supply and fixing in replacement of 15 W LED down lighter Ultra slim decorative aluminium casted recess mounted round fixture in white finish with opal diffuser and separate electronic driver ,suitable for low depth ceiling complete in all as specified and directed. Make:- Havells Cat Part No LHEBADP7IZ1W015 or equivalent make as specified in P.S.

Supply and fixing in replacement of Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base complete in all as specified and directed. Make :- Havells Cat part No. LHFOECE1TZ1O014 or equivalent make as specified in P.S.

Supply and fixing in replacement of Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base complete in all as specified and directed. Make :- Havells Cat part No.LHDL03160099 or equivalent make as specified in P.S.

Supply and fixing in replacement of 36 W LED 6500 K 2'x2' Panel Ultra slim recess mounted EdgeLit LED module with high brightness LED package and unique pattern de-glaring PP diffuser and PS LGP de-glaring diffuser sheet for glare free uniform light distribution suitable for armstrong / grid ceiling applications complete all as specified and directed. Make :- Havells Cat Part No. 36 W LED 6500 K LHEBAEP7PV1W036 or equivalent make as specified in P.S.

Supply and fixing in replacement of Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and directed. Make :- Havells Cat Part No. 10 W LED 6500 K LHEXACP7IN1W010 or equivalent make as specified in P.S.

Supply & fix in replacement of Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and directed. Make :- Havells Cat Part No. 20 W LED 6500 K or equivalent make as specified in P.S.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in replacement of existing worn out LED 10 W bulk head fitting with high output with opal diffuser 230 V AC with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair fan hook suitable for 40 mm dia pipe, made out of MS flat iron size 50x6 mm including suitable size of nut, bolt & washer complete all as specified and directed.

Supply and fixing in replacement of exhaust fans PVC body of size 200 mm sweep including taking down the old unserviceable one and depositing the same in MES store yard complete all as specified and directed.

Supply and fixing in replacement of exhaust fans PVC body of size 250mm sweep including taking down the old unserviceable one and depositing the same in MES store yard complete all as specified and directed.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board SP & N 12 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 8 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply and fixing in replacement of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 16 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply and fix in replacement of MCCB 100 Amp 4 pole 16 KA at 415 V fixed type complete all as specified and directed.

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type B-0 using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.

Schedule of Credit (MINUS) Rs. 75102.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

Mohit Enterprises (BID ID -3081265)

DINESH ELECTRICALS (BID ID -3072889)