PETTY REPAIR FOR ATTENDING DAY TO DAY EM EXTERNAL WATER SUPPLY COMPLAINTS AND ELECTRICAL COMPLAINTS OF BANA SINGH ENCLAVE SHANKAR VIHAR 200 DUS 180 ORs QTRS OTM I II III IHQ CAMP AND ADJOINING AREA UNDER AGE U WATER SUPPLY NO III UNDER GE U WATER SUP

Amount

Labour only for Attending day to day external water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, no water supply including noting the complaints in complaint register complete all as specified and as directed.

Labour only for attending day to day Electrical Supply Complaints (including sunday & Holidays) maintenance of existing LT panels including connecting electrical accessories/spares of water supply installations, electric fittings with lights, short circuits in pump house including noting the complaints in complaint register complete all as specified and as directed.. Note for srl No 1 & 2 :- Material required for attending complaints shall be measured & paid separately under respectvie items here-in-after.

Notes for Srl No. 1 & 2 :- The rates quoted by the contractor shall also deemed to be included for the following :- (i) The complaints shall be attended and the defects shall be rectified by a team of One Experienced Electrician and One Experienced Plumber assisted with two helper, matriculation passed qualified having minimum 03 years experience . (ii) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 500/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from Contractor's dues. (iii) In case , after checking & attending the defect,if it is not possible to rectify the defect within 08 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep. If Engineer-in- charge is satisfied with contractor's view, no recovery will be made.

(iv) While attending the complaint of water supply/Electric supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A'/BOQ. However no extra payments shall be made for dewatering. (v) Cutting of GI pipe in position and threading is also deemed to be included in the job quoted rates (Fittings and fixtures shall be measured and paid separetely under respective items of Sch A/BOQ). (vi) All T&P required for attending the complaints shall be provided by the contractor without any extra. (vii) The pipe fitter shall always be in possession of die set complete with cutters,Taps, Pipe wrench ,Chain wrench, Caulking tools, complete set of spanners and ladders etc..,as required at site. (viii) The electrician shall always be in possession of all electrician tools, LT megger, Earth tester, multimeter, crimping tool, insulation tape, hand gloves etc. as required at site.

Supply and fixing in replacement GI Socket, medium grade, ISI Marked complete all as specified and as directed of following sizes. NOTE: Old demolished item may be taken in charge and recorded in RV.

GI Socket 15 mm bore

GI Socket 20 mm bore

GI Socket 25 mm bore

GI Socket 40 mm bore

GI Socket 50 mm bore

Supply and fixing GI Elbow, medium grade, ISI Marked complete all as specified and as directed of following sizes. NOTE: Old demolished item may be taken in charge and recorded in RV.

GI Elbow 15 mm bore

GI Elbow 20 mm bore

GI Elbow 25 mm bore

GI Elbow 40 mm bore

GI Elbow 50 mm bore

Supply and fixing GI Union, medium grade, ISI Marked complete all as specified and as directed of following sizes. (NOTE: Old demolished item may be taken in charge and recorded in RV.)

GI Union 15 mm bore

GI Union 20 mm bore

GI Union 25 mm bore

GI Union 40 mm bore

GI Union 50 mm bore

Supply and fixing GI Nipple of different length as per requirement, both end screwed medium grade, ISI Marked complete all as specified and as directed of following sizes. (NOTE: Old demolished item may be taken in charge and recorded in RV.)

GI Nipple 15 mm bore

GI Nipple 20 mm bore

GI Nipple 25 mm bore

GI Nipple 40 mm bore

GI Nipple 50 mm bore

Supply and fixing GI reducing socket, medium grade, ISI Marked complete all as specified and as directed of following sizes. (NOTE: Old demolished item may be taken in charge and recorded in RV.)

GI reducing socket size 20 x15 mm bore

GI reducing socket size 25 x15 mm bore

GI reducing socket size 25 x20 mm bore

GI reducing socket size 50 x40 mm bore

Supply and fixing GI Tee, Medium Grade, complete all as specified and as directed of following sizes. (NOTE: Old demolished item may be taken in charge and recorded in RV.)

GI Tee , 15 x 15 x 15 mm bore

GI Tee , 20 x 20 x 15 mm bore

GI Tee , 20 x 20 x 20 mm bore

GI Tee , 25 x 25 x 15 mm bore

GI Tee , 25 x 25 x 20 mm bore

GI Tee , 25 x 25 x 25 mm bore

GI Tee , 40 x 40 x 20 mm bore

GI Tee , 40 x 40 x 25 mm bore

GI Tee , 40 x 40 x 40 mm bore

GI Tee , 50 x 50 x 15 mm bore

GI Tee , 50 x 50 x 20 mm bore

GI Tee , 50 x 50 x 25 mm bore

GI Tee , 50 x 50 x 40 mm bore

GI Tee , 50 x 50 x 50 mm bore

Supply and fixing GI plug, solid, heavy duty, complete all as specified and as directed of following sizes. (NOTE: Old demolished item may be taken in charge and recorded in RV.)

GI plug, 15 mm bore

GI plug, 20 mm bore

GI plug, 25 mm bore

GI plug, 40 mm bore

GI plug, 50 mm bore

Supply and fixing PVC 'L' type holder, suitable for aluminium rod, float ball, of following size bore complete all as specified and as directed. (NOTE: Old demolished item may be taken in charge and recorded in RV.)

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Supply and fixing PTMT float valve, Sizes as under, with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed. (NOTE: Old demolished item may be taken in charge and recorded in RV.)

PTMT float valve, 15 mm bore

PTMT float valve, 20 mm bore

PTMT float valve, 25 mm bore

PTMT float valve, 40 mm bore

PTMT float valve, 50 mm bore

Supply and fixing Gun metal gate valve, with iron wheel head screwed both ends for iron pipe as per IS-778 and fixed including taking out unserviceable one, complete all as specified and as directed of following sizes. (NOTE: Old demolished item may be taken in charge and recorded in RV.)

Gun metal gate valve, 15 mm bore

Gun metal gate valve, 20 mm bore

Gun metal gate valve, 25 mm bore

Gun metal gate valve, 40 mm bore

Gun metal gate valve, 50 mm bore

Supply and fixing lead pig bar complete all as specified and as directed.

Supply and fixing Spurn Yarn complete all as specified and as directed.

Supply and fixing in replacement 25 to 150 mm long, 6 to 20 mm dia nuts, bolts & washers complete all as specified and as directed.

Taking up or down GI steel tubing of following sizes with connections from Trenches/floors/walls including cleaning for refixing or removal complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely. NOTE: QTY obtained after refixing of servicable tubing shall be taken in charge and recorded in RV.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Refixing/ relaying, jointing and testing old GI steel tubing of following sizes, retrieved under srl No 16 here-in-before in new or old position at walls,ceiling or floor etc including cleaning or rerunning the old screw threads, with & including providing new GI fittings complete all as specified and as directed. Note :- Excavation & earth work shall be measured & paid separetely.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Supply and fixing of GI steel tubing medium grade of following size in old or new position as in trenches/ceiling/walls/Floors with necessary fixing arrangements and including providing new GI fittings complete all as specified and as directed. Note :-(i) Excavation for new location shall be measured & paid separetely. (ii) GI fittings should be measured and paid under respective items.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Cutting and screwing the existing steel tubing of following size bore for addition & alteration or lengthening screw on pipe to form connector complete all as specified and as directed.

15 mm bore

20 mm bore

25 mm bore

40 mm bore

50 mm bore

Taking up or down CI/DI Pipe of following sizes including all fittings) with spigot and socketed ends and lead tyton joints including burning out lad joints and recovering lead and including cleaning for refixing or removal complete all as specified and as directed. Note:- Excavation & earth work shall be measured & paid separetely. NOTE: Old demolished item may be taken in charge and recorded in RV.

100 mm bore

150 mm bore

200 mm bore

Supplying, Laying, jointing, testing and commmisioning DI Pipe of following sizes as per IS 8329-2000, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches complete all as specified and as directed . Note:- Joints shall be measured & paid separetely.

100 mm bore

150 mm bore

200 mm bore

Material and Labour for CI/DI fittings/specials such as Tees of any size and radious,bends,collars,tapers,tail pieces,caps and plugs up to 150 mm bore complete all as specified and directed. NOTE: Old demolished item may be taken in charge and recorded in RV.

Material and Labour for CI/DI fittings/specials such as Tees of any size and radious, bends,collars,tapers,tail pieces,caps and plugs from 200 to 300 mm bore complete all as specified and directed. NOTE: Old demolished item may be taken in charge and recorded in RV.

Opening of existing sluice valve including opening of gland cover taking out with stem nut of brass or of stainless steel & refexing the same after with & including replacement of rubber packing, nut & bolts, glands dori etc complete all as specified and as directed of following sizes. Note:- Spare parts under relevant items shall be measured and paid separately under respective items.

80 mm bore

100 mm bore

150 mm bore

200 mm bore

Supply and fixing 'stem' made out from stainless steel of sluice valve of following sizes, complete all as specified and as directed. (NOTE: Old demolished item may be taken in charge and recorded in RV.)

Stem, 80 mm bore

Stem, 100 mm bore

Stem, 150 mm bore

Stem, 200 mm bore

Supply and fixing 'Stem Nut' made out from stainless steel suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed. (NOTE: Old demolished item may be taken in charge and recorded in RV)

Stem Nut, 80 mm bore

Stem Nut, 100 mm bore

Stem Nut, 150 mm bore

Stem Nut, 200 mm bore

Supply and fixing 'Gland Plate' made out from Cast Iron suitable to match with existing sluice valve, sizes as under, complete all as specified and as directed. (NOTE: Old demolished item may be taken in charge and recorded in RV)

Gland Plate, 80 mm bore

Gland Plate, 100 mm bore

Gland Plate, 150 mm bore

Gland Plate, 200 mm bore

Supply and fixing in replacement 15 mm bore Bib tap of PTMT, any tint, high pressure screwed for male/ female threaded, for pipe of size 15 mm bore complete all as specified and as directed. (NOTE: Old demolished item may be taken in charge and recorded in RV)

Supply and fixing in replacement Switch Piano flush type 5/ 6 amps single pole one way 240 volts complete all as specified and as directed. (NOTE: Old demolished item may be taken in charge and recorded in RV)

Supply and fixing in replacement Switch Piano flush type 15/16 amps, single pole, one way, 240 volts complete all as specified and as directed. (NOTE: Old demolished item may be taken in charge and recorded in RV)

Supply and fixing in replacement Switch Socket outlet 2 in 1, 3/5 pin, 5/6 amps 240 volts complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement Switch Socket outlet 2 in 1, 3/5 pin, 15/16 amps 240 volts complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement Switch Socket combination 2 in 1, 3/5 pin, 5/6 amps 240 volts complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement Switch Socket combination 2 in 1, 3/5 pin, 15/16 amps 240 volts complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement MCB SP, 6 to 32 Amp, 240 volts complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Taking down existing LED street light fitting, 90 Watts for servicing, calliberation and repair of CC LED driver (PCB) with input voltage 240 V AC 50 Hz and output voltage 21-36 V DC, 2.30 amp and refixing in position by providing LED 90 watts to make it functional complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement LED batten arrow for multi application suitable for 18 Watts with & including necessary cable connection to make it functional complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement sheet metal enclosure MCB,DB 4 way, SPN,240 volts complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement sheet metal enclosure MCB,DB 8 way, SPN,240 volts complete all as specified and as directed.. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement PVC insulated multistranded copper conductor wire of size 1.5 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement PVC insulated multistranded copper conductor wire of size 2.5 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement PVC insulated multistranded copper conductor wire of size 4 Sqmm, 1100 volts grade fixed on panels/walls complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supplyand fixing in replacement PVC multistranded aluminium conductor, 1100 volts grade , cross sectional area 4 sqmm, 2 core fixed on panels/walls complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement PVC multistranded aluminium conductor, 1100 volts grade , cross sectional area 6 sqmm, 2 core fixed on panels/walls complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement rotational moulded polyethylene water storage tank, cylindrical vertical with closed top, 500 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Supply and fixing in replacement rotational moulded polyethylene water storage tanks, cylindrical vertical with closed top, 1000 litres capacity, tripple layered, hoisted and fixed in position after taking down as existing at site (of any capacity) complete all as specified and as directed. NOTE: Old demolished item may be taken in charge and recorded in RV

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in any type of soil getting out and levelling of bottom surface to required level complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.

RK TRADERS

Tushar engineers

B S ENGINEERS AND ASSOCIATES

DHAIRYAE ENTERPRISES

SREE BABA TRADERS

M/S Satyam Associates

Deven Associates

M P TYAGI ENGINEERS AND CONTRACTORS

Anandeshwar Enterprises

Sukhram & Sons

Bidder Name

Rahul Enterprises