SPL REPAIR TO BLDG NO OPT 113 T 48 T 03 AND PROVN OF 02 TOILET AND BATHROOM NEAR BLDG NO P 31 AT OLD CANTT UNDER GE GANGTOK

Amount

Dismantling plain or corrugated sheeting, any gauge, thickness complete all as specified and as directed.

Dismantling of timber in scantling 40 sq cm and over in section in any position in unframed work complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and as directed.

Demolition cement concrete ( un reinforement) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonary built in cement mortar including all quoins, arches, pillars, precast PCC bond stones including separating serviceable stones/boulders & setting aside for reuse in the work and removal of unserviceable materials from site complete all as specified and as directed.

M&L for mild steel rolled sections conforming to Fe - 290 (Gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including truss complete all as specified and as directed.

M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide complete all as specified and as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and as directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc and fixed with self tapping screws complete all as specified and as directed by the Engr-in-Charge.

S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidesbcomplete all as specified and as directed.

S&F Mild steel butt hinges 100mm long, medium weight, cold rolled. complete all as specified and as directed.

S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised. complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts, 150 mm long, of extruded section. complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

S&F 75mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified and as directed.

S&F 75 mm long aluminum anodised tower bolts of extruded section and fixed complete all as specified and as directed.

M/L for precast solid block massonary of (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) exe 10 CM width and setting in CM (1:6) complete all as specified and as directed.

M&L 15 mm thick rendering plaster on fair faces of conc faces/ brick faces smooth without extra cement in CM (1:6) complete all as specified and as directed.

M&L for rendering 20mm thick in cement mortar (1:4) in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces on other than fair faces etc complete (WPC for finishing layer will be paid seperately as supply only).

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L for preparation of new plaster surfaces and applying priming plastered and other surfaces with alkali resistance pimimg paint and aplying two coats of acrylic washable distemper on walls complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of suitable primer on new surfaces of walls all as specified and directed.

Materials and labour for 50 mm thick PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in sub-base complete all as specified and as directed by the Engr-in-Charge.

M&L for 400x400 mm size ceramic colured tiles 7 to 8mm thick, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointd in coloured cement to match in floor over & incl 20mm th screed bed in CM (1:6) complete all as specified and as directed.

M&L Glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match & incl 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded completed all as specified and as directed.

S&F 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S/F Steel ventilator with top hung shutter including hinges ,steel peg stay complete all as specified and as directed.

S/F 3mm thick ,figured glass, pin head type and glazing with oil in square n.exc 0.50 sqm in each panel complete all as specified and as directed.

S&F vitreous china squatting pan "Orrisa patern" size 580 mm x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed by the Engr-in-Charge. Make :- Paryware/Hindware/Cera

S&F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified and as directed.

S&F PVC floor trap, 75mm dia, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F 15mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling of laid in floors in repairs complete all as specified and as directed.

S&F 15mm bore dia Stop cock cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F 15mm bore dia bib taps cast copper alloy chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed.

Supply & fix in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with necessary clamps,bolts etc.complete all as specified and as directed.

S&F Wash basins, Vitreous China flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting standcomplete all as specified and as directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

Materials & labour for 4 mm thick plywood, 3 ply, grade BWR, type BB, fixed with screws to timber frame work in wall / ceiling complete all as specified and as directed.

Materials & labour for 6 mm thick plywood, 5 ply, grade BWR, type BB, fixed with screws to timber frame work in wall complete all as specified and as directed.

Materials and labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean swan, secured with nails, cross sectional area exc 03 sq.cm & n.exc 06 sq.cm, complete all as specified and as directed.

M&L for RR uncoursed well bonded beded and solidly hearted built in (1:6) CM etc complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone agg) as in surface channel / drains complete all as specified and as directed by the Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth cement concrete using extra cement including forms moulds mitred and stopped ends etc complete all as specified and as directed by the Engr-in-Charge.

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm. any type, fixed to plugs with chromium plated brass screw complete all as specified and as directed.

S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engr-in-Charge.

S&F rotational moulded polythylene water storage tank, 500 litres capacity, anti bacterial, UV and heat resistant 3 layer, ISI marked, multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including supply and fixing of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 455 gms, with threaded cap/Lid including connection including dismantling of old unserviceable water tank complete all as specified and as directed.

M&L for 2nd class hard wood timber scantling fixed clean swan complete all as specified & as directed.

Excavation over areas, n. exc 1.5m deep and getting out soft/loose soil for septic tank etc complete all as specified and as directed.

Excavation over areas for each additional 1.5m and part thereof in depth beyond the first 1.5m and getting out soft/loose soil for septic tank etc complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide and not exc 1.5 m in depth for foundation n.ext 10 sqmm on plan and not exc 1.5 mtr in depth and getting out in soft / loose soil complete all as specified and as directed.

S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall, laid in trenches or in floor with all necessary clamps, bolts, bends, Tee etc. complete all as specified and as directed.

S&F PVC 110 mm dia PVC (SWR) vent cowl of any radius complete all as specified and as directed.

Returning filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick in soft / loose woil complete all as specified and as directed.

Removing excavated materials not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil complete all as specified and as directed.

M&L PCC (1:4:8) type D-2 (using 40mm graded crushed stone agg) in foundation of man hole extra complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 (using 40mm graded crushed stone agg) as in benching of man hole etc complete all as specified and as directed.

M&L for precast RCC (1:2:4) (using 20mm graded crushed stone agg) manhole cover extra set in cement mortar (1:6) complete all as specified and as directed.

M&L for TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending and binding with MS wire, not less than 0.9mm dia or securing with clip complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick complete all as specified and as directed.

M&L RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) (Nominal mix) as in slab/Beams complete all as specified and as directed.

M&L for preparation of old or previously treated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer completed.

M&L for wrought Second class hard-wood in scantlings and timber framed in repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store etc all as specified and as directed.

S&F for except ply any thickness fixed in wall,celing flat or slopingwith screws to timber frame work complete all as specified and as directed.

Demolition to cement concrete of any description and in any position not otherwise specifically provided for (unreinforced) complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) in flooring etc all as specified.Finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 30mm thick Second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats but divided into squares, with plain, chamfered or rounded, mitred andrebated sash bars, any numbers etc complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts, 100 mm long, of extruded section. complete all as specified and as directed.

S&F for window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed.

Dismantiling of matting, single or double any type including, bamboo framing or bamboo supports, cover fillets, if any complete all as specified and as directed.

S&F for split bamboo or reed Matting, single layer, and fixing to frames or supports with unj or other approved string complete all as specified and as directed.

S&F in in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed.

M&L for rendering 15mm thick on other side lathing surfaces in cement mortar (1:6) finished even & smooth using without extra cement etc complete all as specified and as directed.

M&L for preparation on old plastered and other surface of walls and applying two coats of cement base paint , complete all as specified and as directed.

S/F aluminium anodised alloy curtains road with fixing brackets , stops, roller etc complete all as specified and as directed.

M&L for preparation of old steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

Supply and fix 4mm thick Non asbestos fibre cement building boards (E-board) of approved texture, for insulation and acoustic purpose of size 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulsion diatemper over a coat of primer including preparation of surfaces complete all as specified and as directed by the Engr-in Charge.

M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for washing, rubbing down and stopping of distempered and painted old wall surface and applying two coat oil bound distemper etc complete all as specified and as directed.

M&l for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

S & F for Anodised aluminium snap grid frame work for false ceiling confirming IS:733, 737 & IS:1285 ; all as specified and as directed.fix with hanger 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) finished and even as in floor complete all as specified and as directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm/ 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and incl 20mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed.

M&L RCC Design Mix using 20mm graded stone aggr as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for formwork to sides of concrete foundation, footings, bases of columns, raft & raft beams, sides & soffits (if any) of foundation & similar works, vertical of to batter, rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for formwork to rough surfaces of edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

M&L for autoclave cellular(aerated) concrete block masonry, the size of autoclaved cellular (aerated) concrete block use as specified as per site requirement having compressive strength not less than 5.00 N/Sqm (5.00 Kg/Sqcm) conforming to IS: 2185 (Part-3)-1984, setting in CM(1:6) complete all as specified and as directed. Note:- (i) Sampling and testing of AAC concrete blocks shall be carried out in accordance with IS Specification. (iii) Manufacturer certificate to be produced that masonry units conform to the requirements of this specification and IS:2185 (Part-3). (iii) Contractor should produce independent tests certificate of AAC Block from manufacturer before or immediately after delivery.

M&L for rendering 20mm thick in cement mortar (1:4) in on other than fair surfaces on brick or concrete surfaces finished even & smooth using without extra cement etc complete all as specified and as directed.

M&L for mild steel rolled sections conforming to Fe - 290 (Gde E-165) as roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

Supply & fix steel windows Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded etc complete all as specified and as directed.

M&L for stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc complete all as specified and as directed.

Supply & fix Aluminium handles, 150 mm size, cast type, anodised complete all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) in coping set incl weathering, slightly rounded or chamfered angles & thickness complete all as specified and as directed.

M/L form work to faces of walls, retaining walls, etc vertical or to batter rough finished surfaces of concrete (flat) complete all as specified and as directed.

M& L for 25mm thick damp proof course in cement concrete (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork (WPC will be paid seperately as supply only) etc complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40 mm graded crushed stone agg) in plinth protection path/hardstanding finished cement concrete surfaces fair and even complete all as specified and as directed.

Suface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil etc complete all as specified and as directed.

M&L for Hardcore of gauge n. exc. 63mm deposited spread and levelled in layers n. exc. 15 cm thick watered and rammed to true surface complete all as specified and as directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc complete all as specfied and as directed.

Material and labour for applying three coats of white washing including preparation of new / previously untreated surfaces of wall complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded crushed stone agg) as in sub base of floor complete all as specified and as directed.

Supply and fixing white vitreous china wash down water closet pan (pedestal pattern) EWC, of size 570 x 460 x 380 mm with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminium anodised hinging device, making all necessary connections and making good the disturbed surfaces of floor complete all as specified and as directed.

S&F for grating doom 100mm dia of PTMT etc complete all as specified and as directed.

M&L for 20mm steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete all as specified and as directed.

S&F 15 mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F PVC (SWR) 75mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor with necessary clamps, bolt, bends, Tee complete all as specified and as directed.

S&F 75mm bore PVC(SWR) bends any radius complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes 100mm bore, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Cutting into existing manholes for connecting new drain making good to pipes and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement mortar (1:2:4) types B-1 (using 20mm graded crushed stone agg) smooh finished and reforming benching are required complete all as specified and as directed.

S&F cast iron Nahani trap 100mm bore complete all as specified and as directed.

S&F 110mm PVC (SWR) P or S trap complete all as specified and as directed.

S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F for toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

S&F for PVC (SWR) junction single (single tee) equal or unequal, dia of pipe 110mm complete all as specified and directed.

S&F wash basin, vitreous china (flat back or angle back type) of size 630 x 450mm including matching pedastal fixed with and including cp brackets with complete fittings complete all as specified and as directed by the Engr-in-Charge.

E/M Portion: Taking down carefully copper/ aluminium point wiring for light, fan, socket or power point complete with fittings such as switches, fan regulators, light fittings, tube light fittings, bracket light fittings and ceilling rose, holders and including making good the disturbed surface on walls, complete all as specified and as directed.

M & L for point wiring with PVC insulated unsheathed multi stranded copper conductor cable, 1100 volt, FRLSH grade of size 1.5Sqmm drawn through and including surface PVC casing & caping (ISI Marked) with accessories including PVC Box or existing sunken box and hylem sheet/PVC Box including 1.5 sqmm copper conductor cable for earth continuty green in colour for one light point/fan point/Bell point controlled by one 5/6 Amps one way switch, complete all as specified and as directed by Engr-in-charge. Note:-(i) All the disturbed surfaces of wall / ceiling shall be made good to match the existing wall / ceiling finishes and as directed by the Engineer-in-Charge.

All as per item No 128.00 here-in-above but one 3 pin 5 amps switch socket outlet point on independent board complete all as specified and as directed.

All as per item No 128.00 here-in-above but, one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.

All as per item No. 128.00 here-in-above but for 15/16Amp switch socket out let, independent with 1.5 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 1.5 Sqmm for earth continuity conductor, complete all as specified and as directed.

All as per item No. 128.00 here-in-above but for 15/16Amp switch socket out let, independent with 2.5 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 2.5 Sqmm for earth continuity conductor, complete all as specified and as directed.

All as per item No. 128.00 here-in-above but for 15/16Amp switch socket out let, independent with 4 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4 Sqmm for earth continuity conductor, complete all as specified and as directed.

M&L point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall / fixed to roof, ceiling etc. and including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60mm thick sheet steel duly painted concealed in walls, with face plate and base plate/ PVC sheet ISI marked top cover with brass / chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc connected to main switch / DBs or common earth dolly for light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and as directed. Note : Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No.134.00 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 1.5 Sq mm multistranded copper conductor wire FRLS PVC insulated and 1.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and as directed by Engineer-in-Charge

All as per item No.134.00 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 2.5 Sq mm multistranded copper conductor wire FRLS PVC insulated and 2.5 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and as directed by Engineer-in-Charge

All as per item No 134.00 here-in-above but, one socket outlet, three pin, 5/6 Amp on the same board with other switches complete all as specified and as directed.

Supply and fixing of switch paino, flush type, single pole, one way, 5/6 Amp, complete all as specified & as directed.

Supply and fixing of ceiling rose, surface Bakelite 65 x 30mm, three terminals, complete all as specified & as directed.

S&F socket oultet 2 in 1, 3 pin 5/6 Amp complete all as specified and as directed.

Supply and fix switch socket combination 5 in 1 type, 3 pin 5 / 16Amp, 230 volt, complete all as specified and as directed.

Supply & fix lamp holder angular / straight insulated body, with back plate suitable for batten fittings, white / ivory finish with 9 watt LED bulb complete all asspecified and as directed.

S&F LED light fitting 1 x 18 W, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

M&L for concealed sub-main wiring alongwith earth wire of size 2 x 6.0 Sqmm + 1x 6.0 Sqmm earth wire, ISI marked FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and incl PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinkings for sunken boxed & making good to walls, floors etc complete including taking down old unserviceable one complete all as specified and as directed.

S&F MCB DB SPN 8 Ways double door, IP-42, IK-09 with metal door, rated bus bars, earth bar, neutral links complete incl blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed.

S&F of non metallic ventilating Fans, 200mm sweep 900 rpm, AC single phase, 230 volts including louver connection with multistandard copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e, anchor nut, bolt, washer and grouuting and making good to distributed surface complete all as specified and as directed.

S&F in water proof 10 watt LED bulk head 1x10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable fo suitable size complete all as specified and as directed by Engr-in-Charge.

S&F in replacement 10 W tubelight fitting with lamp, endura linear LED wall mounted LED pattern with polycarbonate housing & integrated driver for efficeint heat dissipation having THD<20% with complete fitting all as specified and as directed. Make- Bajaj/ Havells/CG/Phillips.

S&F MCB single pole & neutral SPN 40 to 63 Amps , 240 Volts , 10 KA rupturing capacity , C curve complete all as specified and as directed.

S&F MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed by Engineer-in-charge.

M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected with galvanised iron/steel earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to DBs including necessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC (1:2:4) type B1 chamber with 40mm thick RCC (1:2:4) type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and as directed by Engineer-in-Charge including testing on completion.

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 16 sqmm 2 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Supply and laying of DWC pipe,ISI marked in trenches or in cable ducts or fixed on walls using clamps along with all accessories like socket,bend,couplers etc confirming to IS 14930,part-II complete with fitting cutting,jointing etc of size 50 mm outer dia complete all as specified and as directed by Engr-in-Charge

S&F bore 40mm pipe galvanised iron medium grade complete with all fittings fixing on wall, jointed tested and commissioned complete all as speicfied and directed.

Supply, Laying, jointing & testing in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer in charge of cross sectional area of 25 Sqmm 2 core

S&F in repair LED street light 25W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP-66 protection and impact resistance of IK07 having 1.5 mtr GI pipe with two coat of painting complete all as specified and as directed.

S&F LED light fitting 1 x 18 W (4 FT), CRI >=80, CT >=5700K, wall / surface mounted, integrated type, constructed of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangements complete including 01 No 18 W (4 FT) LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed.

Supply and fix in replacement LED retrofit lamp B22 holder base with polycarbonate body and aluminium heat sink of 09 Watt complete all as specified and as directed.

Supply and fix switch socket combination 2 pin & 3 pin 5 Amp, 230 volt flush, multipurpose, flush, non shutter, non inter locking type, white/ivory finish with 2 screw fixing hole including suitable gang box fix on wall complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 6 pin , 5/6 Amp and 15/16 Amps, 230 volt flush, multipurpose, flush, non shutter, non inter locking type, white/ivory finish with 2 screw fixing hole including suitable gang box fix on wall complete all as specified and as directed.

S&F ceiling rose, PVC/Polycarbonate insulated body, 3 terminal and 240 volts (ISI marked) complete all as specified and as directed.

S&F in sheet metal enclosure for 12 way Distribution Board (DB's), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/Ilolators complete all as specified and as directed.

S&F in sheet metal enclosure for 8 way Distribution Board (DB's), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/Ilolators complete all as specified and as directed.

M&L for sub main wiring with 2 runs of 6 sqmm PVC insulated unsehathed copper cable multistand 1100 V of FRLS grade with drawn PVC casing and capping not less than 25mm dia and one run of PVC insulated serviceable of 6 sqmm as earth continuity conductor drawn in casing and capping with accessories complete including taking down old unserviceable wiring complete all as specified and as directed. Note : 3 runs of 6 sqmm and 1 run of conduit will be measured as one unit i.e RM

S&F MCB single pole & neutral 63 Amps, 240 Volts, 10 KA rapturing capacity, C curve complete all as specified and as directed.

S&F MCB single pole & neutral 32 Amps, 240 Volts, 10 KA rapturing capacity, C curve complete all as specified and as directed.

S&F in sheet metal enclosure for 4 way Distribution Board (DB's), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/Ilolators complete all as specified and as directed.

Supply and fix of exhaust Fans, 300mm sweep 1200 rpm, heavy duty, AC single phase, 230 volts including louver connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and as directed. Make : Havells//Khaitan/Almonard/Bajaj/Crompton Greaves

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 10 sqmm 2 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Supply & laying testing and commissioning in trenches or fixing on wall or passing through pipe or in cable ducts ELPE insulated PVC sheathed, screened, PVC bedded and PVC tape sheathed galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core including cable lugs, glands, insulation tape etc complete all as specified and as directed.

Supply and Fix geyser of 25 Ltr capacity, AC single phase 230 volts 5 star rating including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and as directed

Supply and laying steel water tubing medium grade galvanised with all fittings such as elbow, union reducer, tees, bends etc and short length fixed on wall/floor/ceiling of size 25mm bore complete all as specified and as directed.

S&F in repair gun metal gate valve of size 25mm bore with iron wheel head screwed both ends for iron pipe and fixed including taking down old u/s valve complete all as specified and as directed.

Cutting or screwing existing pipe of any insertion of tee of suitable size for branch connection dia complete all as specified and as directed.

S&F rotational moulded polythylene water storage tank, 500 litres capacity, anti bacterial, UV and heat resistant 3 layer (ISI marked) multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including supply and fixing of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 210 gms, with threaded cap/Lid including connection including dismantling of old unserviceable water tank complete all as specified and as directed.

KAMLESH ENTERPRISE (BID ID -3276208)

DHARMINDER SINGH (BID ID -3276722)

M/S ANIL KUMAR THAKUR (BID ID -3276318)

BIJAY MITTAL (BID ID -3276088)

SANJAY KAUSHIK (BID ID -3276914)

NISHA CONSTRUCTIONS (BID ID -3276523)