WELCOME MAINT AND MISC REPAIR TO PLASTER, FLOORING, SANITARY FITTING, SUNKEN TREATMENT, JOINERY ETC IN MARRIED OFFRS ACCN IN SOUTH AREA AT NASIRABAD

Amount

M & L for preparation of old plastered or unplastered surfaces of wall including cornices etc applying one coat of white wash complete all as specified and directed.

All as per srl item No 1.00 here in before but one coat of white wash on ceiling

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified & directed.

M & L for washing rubbing down and stopping distempered surfaces of wall and applying one coat of oil bound distemper white or tinted complete all as specified and directed.

M & L for complete removal of existing treatment of old plastered surface of wall and applying two coats of oil bound distemper over a coat of primer and one coat of 1mm thick putty (JK / Birla) complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of weather proof acrylic emulsion paint over a coat of 1mm thick wall care putty including a coat of emulsion wall primer all as per manufactures instructions complete all as specified and directed. Make :- Asian, Apex and Berger or equivalent as approved by GE

M & L for complete removal of existing treatment of old surface of manglore tiles and applying two coats of terracotta roof paint complete all as specified and directed. Make :- Apex/Berger

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over & including one coat of 1mm thick cement putty (JK/Birla) complete all as specified & directed..

M & L for preparation of newly plaster surfaces of wall & applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for washing rubbing down and stopping of old painted surfaces, removing nails, making good holes, cracks etc and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old surface of steel or iron based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint(1st quality) complete all as specified and directed.

M&L for preparation of old surface of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer complete all as specified.

M&L for preparing the new wooden surface of any description over 10 cm width or girth & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer complete all as specified & directed.

M & L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height with synthetic enamel paint of approved tint complete all as specified and directed.

Demolition of brick/stone masonry built in cement or cement lime mortar in any description complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed, well bonded, bedded & solidly hearted, built in CM (1:6) complete all as specified and directed.

All as per sl item No 17.00 here in before but except stones. Note: Old servieable stones retrieved vide Sl item no 16.00 shall be reused.

M & L for brickwork with fly ash bricks, old size, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M & L for brick work with fly ash bricks, straight or curved on plan to any radius, in half brick thick wall built in CM 1:4 complete all as specified and directed.

Dismantling loose / disintegrated portion of RCC chajjas bends shelves, beams balconies and similar work at any position or any height and dubbing out with PCC (1:1.5:3), 15mm to 50mm thick using 6 to12mm graded stone aggregate to make up and finished to required shape including applying anti corrosive paint on exposed surface of reinforcement, provision of necessary supports, form work and 10mm thick plastering in CM (1:4) finished fair and even complete all as specified and directed.

Taking down cement or cement lime plaster from stone / brick wall, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:6) on stone masonry surfaces wall finished even and smooth without using extra cement or surface other than fair face of brick-work or on one side of lathing complete all as specified and directed.

M & L for rendering 5mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rough cast plaster over & including10mm thick rendering in cement mortar (1:4) on stone masonary wall surface complete all as specified & directed.

M&L for rough cast plaster over & including10mm thick rendering in cement mortar (1:4) on brick masonary wall surface complete all as specified & directed.

M & L for 15mm thick rendering in CM (1:4) on brick/concrete surface mixed with water proofing compound @ 3% by weight of cement & surface fair and even complete all as specified & directed. NOTE :- WPC will be measured and paid separately

Raking out joints/ pointing to random rubble or polygonal rubble stone masonry uncoursed or brought upto courses built in CM and M & L for raised pointing in cement mortar (1:4) complete all as specified and directed.

Supply only integral water proofing compound, ISI marked complete all as specified & directed

Dismantling floor, hearth or wall tiles including cement mortar and rubbish off the premises, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M & L for vitrified ceramic tiles light shade 10mm thick (square / rectangular) polished area of each tiles n.exc 0.36sqm in floor, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile laid over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed.

M & L for vitrified ceramic tiles light shade 10mm thick (square / rectangular) polished area of each tiles n.exc 0.36sqm in skirting set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile over and including 15mm thick screed plaster in CM (1:4) complete all as specified and directed.

M & L for non-skid ceramic coloured tiles (joint free), 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M & L for non-skid ceramic coloured tiles (joint free), 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in floor, complete, all as specified & directed.

All as per Sl item no 34.00 here in before but on vertical surfaces of stone wall such as dados, skirting etc set & jointed in neat slurry and pointed in white cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in CM 1:4 complete all as specified and directed.

M & L for glazed ceramic coloured tiles, 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces of wall such as dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tile over and including 10mm thick screed plaster in CM (1:4) complete all as specified and directed.

M&L for 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like set & jointed in neat cement slurry & pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding the exposed edges laid over & including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished fair and even laid in alternate bays n.exc 2m in length nd joints filled with bitumen mastic 1:3 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any position & of any description from sunken floor (ground or 1st floor) and removing and depositing materials exc 150mtrs but n exc 250 mtrs away complete all as specified and directed.

M & L for cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken floors filling and mass concrete complete all as specified and directed.

M&L 20mm thick cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water proffing treatment on sunken portion with acrylic based polymer modified cementitious composit compound as specified and approved & cement slurry two layers, 1st layer @ 0.488 Kg/Sqm mixed with composit compound @ 0.253 Kg/Sqm & the second layer slurry @ 0.242 Kg/Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 polyflim with adhesive complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each leaf and removing from site complete all as specified and directed

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and removing from site complete all as specified and directed

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf & refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified and directed.

Taking down shutters of any description exc 2 sqm each leaf & refixing in the same opening after necessary resecuring or easing & adjusting etc complete all as specified and directed.

S & F second class HW (Hollock/Bansum/Sal), plain, solid, straight, chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed.

M & L for rolled mild steel work angle iron (40x40x6mm) as in door frame (Chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-210 Gde E-165 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed

S & F mild steel hold fast of flat iron 25x6mm conforming to Fe-210 Gde E-165 including preparing the surfaces & treated with coaltar & sanded with clean sharp sand complete all as specified & directed

S&F factory made PVC solid frame of size 50mmx47mm made out of 5mm prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. square tube and fixing in opening as per specification & drawing on page 160 of SSR-2010 complete all as specified and directed.

M&L in repairs for 2nd class hard wood plain fillets,square ,rectangular or triangular area exec. 13 sqcm but n exec 25 sqcm in sectional, clean sawn, secured with nails or breads sectional area exec. 13 sqcm but n exec 25 sqcm complete all as specified and directed.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2 raised panel design with 2mm thick moulded prelaminated PVC sheet on front face & 2mm thick plain colour PVC sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part - II) 2010 complete all as specified and directed.

S & F IInd class HW Hollock/Bansum/Sal 35mm thick, factory made, plain framed, panelled shutter (Two panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned & chemically pressure treated complete all as per specified and directed.

S & F second class HW Hollock/Bansum/Sal, 35 mm thick, glazed and skeleton shutters, factory made open rebated (Three panels)and prepare to receive glass, gauge etc with out sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR Part-I, section 8 clause 8.24(a) Member shall be kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F in repair factory made steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars and necessary cooler arrangement in window complete all as shown in drg No. CEBZ/TD/14/11 sh No 1/7 to 7/7 complete all as specified and directed.

Taking down of old boards and S & F 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination, fixed with screws including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works complete all as spepcified and directed.

S&F in repairs providing 50x50mm aluminium anodised grills mesh for fixing in wooden gauged door shutter weight not less than 1.2Kg/Sqm complete all as spepcified and directed.

S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 125 mm complete all as specified and directed.

S&F in repairs mild steel butt hinges, medium weight, cold rolled, ISI marked of size 125 mm including necessary welding work etc complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handle fabricated type anodized complete all as specified & directed.

S&F in repairs 150 mm long extruded aluminium alloy handle fabricated type anodized complete all as specified & directed.

S & F in repairs 100mm size hasp and staple, aluminium anodised, safety type including bolt to hinge plate complete all as specified and directed

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S&F in repairs aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S & F aluminium alloy, anodised sliding door bolt, 300mm long, ISI marked, with hasp and staple (bolt type) and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repairs aluminium alloy, anodised sliding door bolt, 300mm long, ISI marked, with hasp and staple (bolt type) and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed.

S & F in repairs floor door stopper aluminium alloy body & tongue of size 140mm, anodised with hard drawn spring, fixed in door,over all length of cover plate of complete all as specified and directed.

S&F in repairs 300 mm rat tail rod Mild Steel ordianary pattern springs including roller and roller plate complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick figured glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

S & F in reapirs 25mm dia MS chromium plated curtain rod powder coated tubular, fancy type, complete all as specified and directed.

S & F MS chromium plated powder colour coated, decorative type knobs with bracket fixed at end of pelmet rod suitable for 25mm dia complete all as specified and directed.

S & F in repair white colour rotational moulded polyethylene (HDPE) water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted, double layer, ISI marked hoisted and fixed in position complete all as specified and directed.

S&F in repair white colour rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) of 1000 litre capacity, triple layered, hoisted and fixed in position, complete, all as specified in SSR Part - I and as directed. NOTE FOR ITEM NOs 77.00 & 78.00 :- (i) The unit rate quoted by tenderer shall be deemed to insulate water tank with GI pipe medium grade 10cm long projected inside and outside of tank with bore suitable for inlet and outlet, GI pipe 20mm bore medium grade projecting 10cm inside and outside of the tank for over flow, GI pipe 20mm bore medium grade projected 10cm inside and outside of tank for vent & mosquito cover for vent/overflow pipe.

Taking up or down steel tubing / connection & removing from site of following sizes complete all as specified and directed :-

All as per srl item No 79.00 here in before but 15mm bore

All as per srl item No 79.00 here in before but 20mm bore

All as per srl item No 79.00 here in before but 25mm bore

S & F steel water tubing, medium grade, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes complete all as specified and directed :-

All as per srl item No 83.00 here in before but15mm bore

All as per srl item No 83.00 here in before but 20mm bore

All as per srl item No 83.00 here in before but 25mm bore

Refixing only old serviceable GI tubing, medium grade, with new fittings if required including cleaning and fixed complete to walls and ceilings or laid in floors of following sizes complete all as specified and directed :-

All as per srl item No 87.00 here in before but 15mm bore

All as per srl item No 87.00 here in before but 20mm bore

All as per srl item No 87.00 here in before but 25mm bore

S&F in repair stop/angle valve 15mm bore cast copper alloy, chromium plated, fancy type ISI marked with long crutch or butterfly handle screwed down high pressure screwed both ends for iron pipe complete all as specified & directed.

S & F in repair bib taps ISI marked, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore of pipe complete all as specified and directed.

S&F in repair pillar tap,15mm bore, cast copper alloy, chromium plated, fancy type, screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified and directed

S&F in repairs 25mm bore gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipes and fixed all as directed.

S & F in repairs 15 mm bore bib taps standard of PTMT any colour, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair brass chromium plated shower rose of 125mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

S & F in repair tubular towel rail, chromium plated brass 20mm dia ‘D’ type 60cm long between flanges complete all as specified and directed.

S & F in repair for Toilet fittings corner glass shelf with bracket complete all as specified and directed. Make :- Jaquar Cat No. CAN-CHR-1173

S & F in repair for Toilet fittings wall mixer (wall mounted model) with teliphonic shower rose complete all as specified and directed. Make :- Jaquar Cat No. CON-217 KN

S & F in repair for Toilet fittings wall teliphonic shower with 1.5 mtr long flexible tube & swivel wall hook complete all as specified and directed. Make :- Jaquar Cat No. HSH-CHR-1937

S & F in repair for Toilet fittings health faucet complete all as specified and directed. Make :- Jaquar, Prayag Cat No. 452 or equivalent as approved by GE.

S & F in repair for PVC Cabinet of size 422mm x 622mm with mirror of good quality with shelves in bath fixed complete to walls complete all as specified and directed. Make :- Prayag Cat No. 555

S & F in repair for toilet fittings two way bib cock of 15mm bore complete all as specified and directed. Make :- Jaquar Cat No.-OPP-CHR-15041PM

S & F in repair for toilet fittings chromium coated towel rack 600mm long without lower haners but three hooks complete all as specified and directed. Make :- Jaquar Cat No.-ACN-CHR-1181FHS

S & F in repair brass wall mixer 15mm bore cast copper alloy chlromium plated wall each mixer with hot and cold water with crutch handle complete all as specified and directed.

Taking down old unserviceable WHB and S&F vitreous China, coloured, wash hand basin flat back of size 550 x 400mm complete all as specified and directed

S & F waste coupling CP 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed.

S & F in repair PVC flush pipe of approved quality 32 mm bore, for low level flushing cistern complete all as specified and directed.

Taking down old unserviceable PVC connection and S & F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed

Taking down old unserviceable waste pipe and S&F 32mm bore PVC waste pipe of 75mm length with one end socketed complete all as specified and directed.

S & F in repairs grating square/round 140mm size of PTMT with centre hole movable or side hole for fix to waste pipe (minimum weight 50 gms) complete all as specified and directed.

Taking down old unserviceable water closet seat cover & S&F plastic water closet seat cover, white, closed pattern with flat bottom and cover & mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Taking out old unserviceable water closet and S & F Vitreous China wash down closet pan (pedestal pattern), white, including plastic cover white closed pattern whith flat bottom and mild steel chromium plated / PVC hinge device including connections to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe etc complete all as specified and directed.

Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with chinaware ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed.

S & F in repair PVC valve less, syphonic action type flushing cistern, ISI marked, 10 litre capacity, low level, white/ivory colour, with inlet, ball valve, float, handle fixed with PVC rawl plug of suitable size complete all as specified and directed.

Taking down old unserviceable kitchen sink and S&F kitchen sink with drainage board overall size not less than 915x460mm, bowl size 410x 330x160mm made of stainless steel 1.00 mm thick with plugs, washers and waste including fixing cantilever brackets and connecting union complete all as specified and directed.

S & F in repairs stainless steel plate rack made of 1.00mm thick of over all size 920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed.

Fabrication & fitting of modular kitchen with cabinet/shelves & wardrobe/cupboard made out of 18mm thick (one side decorative lamination & other side baancing lamination) PVC sheet with piano hinges including providing cabinet for keeping baskets / cutlery baskket with handles/door shutters complete all as specified and directed. Note :- PVC sheet, fitting & fixture will be measured and paid separately as supply only.

Supply only in repairs 18mm thick (one side decorative lamination & other side baancing lamination) solid PVC board with cement solvent adhesive for shutter/kitchen cabinet / cup board/partition wall/ wall cabinet complete all as specified and directed. Make :- Raj shree or equivalent as approved by GE.

Supply only 100mm size concealed hinges stainless steel soft close clip on hinge bright finish complete all as specified & directed.

Supply only 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed.

Supply only in repair stainless steel basket (plain) of approved quality of size 475 X 500 X 100mm complete all as spepcified and directed. Make :- Godrej SS 304

Supply only in repair stainless steel plate basket of approved quality of size 475 X 500 X 200mm complete all as spepcified and directed. Make :- Godrej SS 304

Supply only in repair stainless steel cup & saucer basket of approved quality of size 475 X 500 X 100mm complete all as spepcified and directed. Make :- Godrej SS 304

Supply only in repair stainless steel thali basket of approved quality of size 475 X 500 X 200mm complete all as spepcified and directed. Make :- Godrej SS 304

Supply only in repair stainless steel cutlery basket of approved quality of size 475 X 500 X 100mm complete all as spepcified and directed. Make :- Godrej SS 304

Supply only in repair stainless steel carousel basket of approved quality of size 600mm x 600mm complete all as spepcified and directed. Make :- Godrej SS 304

Supply only basket / trolly channel 50cm long extruded MS galvanised over roller complete all as spepcified and directed.

S & F in repair PVC(SWR) floor trap with grating 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repairs 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall ISI mark, complete all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall ISI mark, complete all as specified and directed.

S & F in repairs 75mm bore PVC (SWR) bend / shoe with oval access door of any radius complete all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) bend / shoe with oval access door of any radius complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

V K LAKWAL CONSTRUCTION

ANAM BUILDCON

M/S SHIVA TRADERS

Shree Sai Ram Enterprises

SHRI RADHAYSHYAM JHA

M/s SUNIL ENTERPRISES

Sunil Enterprises

Tulsi Enterprises

H M LAXMINARAIN