Renovation and Furnishing W...

Providing of 4 Sq. mm 4 core copper cable ( Unarmoured) complete in all respect with the prior approval of EIC. Make:- Grandlay, Havells, Polycab… Complete in all respect with prior approval of EIC.

Providing and placing in position desk based workstation. Understructure : The under structure shall be comprising of metal powder coated cross connector between legs. It shall be made up of metal powder coated finish and the entire assembly shall be fixed to the top. WIRE MANAGEMENT: For vertical wiremenagement, wire risers with cover shall be considered. For horizontal wiremanagement - Wire Tray with integrated power box. Access flap shall be provided. Switch plate of (8 plus 3 Anchor Roma) module shall be considered for Power and Data points. LEGS: Providing metal powder coated legs. Legs shall be fabricated by Argo Shield welding MS ERW Tube 40 mm x 40 x 1.2 mm thk, with the base of the MS tube a polycarbonate cap with M8 metal insert shall be fixed, on to which a straight M8 leveler fitted to a bottom translucent cap which allows for adjustment of the height by 50mm. Support brackets of 3 mm thk HR shall be welded on top surface of Leg for fixing top. WORKSURFACE : Works surface shall be made of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 900 mm w x 600 mm d. PARTIAL SCREENS: Fabric Screen of 300mm ht shall be mounted on studs. This screen shall be made of block structure (3mm thk MDF board plus batten made of 12mm thk MDF board plus 3 mm thk MDF board, E1 grade as per EN 13986) Honey comb block shall be used to fill in the void space. Groove of 3 mm shall be provided on the periphery. This groove shall be accommodate the fabric pasted on either side to be tucked in and allow a PVC Flexible T-Mould to give a clean edge. The Fabric screens shall be upholstered with Hot-melt glue.MODESTY : Lazer cut perforated Metal modesty Metal modesty shall be mounted on the worktop with the help of the modesty mounting brackets Modesty should terminates at 400 mm from ground. Complete in all respect with prior approval of EIC.

Providing and placing in position desk based workstation. Understructure : The under structure shall be comprising of metal powder coated cross connector between legs. It shall be made up of metal powder coated finish and the entire assembly shall be fixed to the top. WIRE MANAGEMENT: For vertical wiremenagement, wire risers with cover shall be considered. For horizontal wiremanagement - Wire Tray with integrated power box. Access flap shall be provided. Switch plate of (8 plus 3 Anchor Roma) module shall be considered for Power and Data points. LEGS: Providing metal powder coated legs. Legs shall be fabricated by Argo Shield welding MS ERW Tube 40 mm x 40 x 1.2 mm thk, with the base of the MS tube a polycarbonate cap with M8 metal insert shall be fixed, on to which a straight M8 leveler fitted to a bottom translucent cap which allows for adjustment of the height by 50mm. Support brackets of 3 mm thk HR shall be welded on top surface of Leg for fixing top. WORKSURFACE : Works surface shall be made of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 900 mm w x 600 mm d. PARTIAL SCREENS: Fabric Screen of 300mm ht shall be mounted on studs. This screen shall be made of block structure (3mm thk MDF board plus batten made of 12mm thk MDF board plus 3 mm thk MDF board, E1 grade as per EN 13986) Honey comb block shall be used to fill in the void space. Groove of 3 mm shall be provided on the periphery. This groove shall be accommodate the fabric pasted on either side to be tucked in and allow a PVC Flexible T-Mould to give a clean edge. The Fabric screens shall be upholstered with Hot-melt glue.MODESTY : Lazer cut perforated Metal modesty Metal modesty shall be mounted on the worktop with the help of the modesty mounting brackets Modesty should terminates at 400 mm from ground RECTA WORKSTATIONS - 1500W X 600D x 750H Complete in all respect with prior approval of EIC.

Providing and placing in postion stool. SEAT ASSEMBLY: The seat should be made up of 1.2±0.1cm thick flat plywood and with moulded Polyurethane foam and should be .upholstered with replaceable synthetic leather covers. SEAT SIZE shall be Diameter 40.0 cmADJUSTMENTS: 360° Revolving type. BACK. ASSEMBLY: The back foam should be designed with contoured Lumbar support for extra comfort. The upholstery should be in synthetic leather. BACK SIZE shall be 45.0 cm (W) covered with polyurethane foam. HIGH ESILIENCE (HR) POLYURETHANE FOAM:The HR.polyurethane foam should be moulded with density = 45 plus 1-2 kg/m3 and Hardness load 16 ± 2 kgf for 25% compression. HEIGHT ADJUSTMENT: The manual height adjustment should be available. It should be easily locked at the most comfortable position. PEDESTAL ASSEMBLY: The five-prong pedestal should be fabricated from 0.2 ± 0.02 cm thick HR sheet( should be : DD 10791 HR ), powder coated ( OFT 40-60 microns )and fitted with an injection moulded black Polypropylene Hub Cap and 5 nos. twin wheel castors. The pedestal should be 55.0±0.5cm pitch-circle diameter (65.0±1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in Black Nylon. Over all size shall be Width- 65.0cm, Depth- 65.0 cm, Height- 66.0cm to 77.5cm, Seat Height- 45.0 to 56.5cm. Complete in all respect with prior approval of EIC.

Supply and Installation: Supply and Installation of 1G SFP Module. Make: Cisco/D-Link/Aruba Complete in all respect with prior approval of EIC.

Supply and Installation: Wall Mount 9U x 550 W x 500 D, 1U Cable Manager, Roof Mounted Fan Unit / 90 CFM / 230V AC,6 Way 5 Amp Power Distribution Unit,Mounting Hardware Kit,Conforms to DIN 41494 OR equivalent ISO Standards, Adjustable 19” equipment mounting verticals provide the better mounting flexibility, and maximizes the usable mounting space,Depth adjustable mounting slots,Front Glass Door with Lock, Top and bottom Panel with ventilation and cable entry facility, Provision to mount the cooling fans on the top panel, Powder coated finish with Seven Tank pretreatment process meeting all industry standards, Grounding and Bonding Options. 100% assured compatibility with all equipments conforming to DIN 41494 (General industria lstandard for equipments) B Make- D-Link/Schneider/Dynamic plus C5 Complete in all respect with prior approval of EIC.

Supply and Installation: 4X4 Access Point Physical Interfaces : One 100/1000/2.5GBASE-T Gigabit Ethernet (RJ-45) ports with Auto Uplink (Auto MDI-X) supporting IEEE 802.3af or 802.3at Power over Ethernet (PoE),Two (2) Internal 3.1/4.3 dBi (2.4GHz/5GHz) antenna ,Four (4) LED: Power and Cloud connection: LAN speed: 2.4GHz status: 5.0GHz status,Power adapter (not included): 12V DC, 2.5A. Standards : 5.0GHz: 802.11a/n/ac/ax: 2.4GHz: 802.11b/g/n/ax , IEEE 802.11ax WiFi 6 standard , WMM - Wireless MultiMedia Prioritization , WDS- Wireless Distribution System , Power over Ethernet (PoE) IEEE 802.3af/802.3at. Security : Wi-Fi Protected Access (WPA, WPA2, WPA3), 802.11i, WPA2 Enterprise , Wireless access control to identify authorized wireless network devices , MAC address filtering with access control , 802.1x RADIUS support with EAP TLS, TTLS, PEAP, Neighbor AP detection, VLAN Support, Secure Socket Layer (SSL), Guest Network/Captive Portal, Bandwidth management, Link Layer Discovery Protocol. Network Management : Cloud based App Management for setup, monitoring and management from anywhere anytime (Remote configuration and management), Easy-to-use Web browser-based management GUI, Manageability : As standalone, Centralized Management through Mobile Application. Advanced Wireless Features : Wireless Distribution System (WDS), Bridge mode: Point-to-point wireless WDS mode, Bridge mode: Point-to-multipoint wireless WDS mode, Repeater mode, Adjustable Transmit Power Control (TPC), Device detection, Identify type of wireless clients in the network. Other Specifications : PoE power consumption: 25.5W, Business class WiFi based on next generation 802.11ax WiFi 6 technology on both 5.0GHz and 2.4GHz bands. Backward compatible to 802.11b/g/n/a/ac, Dual band 4x4 (2.4GHz and 5.0GHz) 8 streams of data for an aggregate throughput of up to 3.6Gbps, Theoretical Throughput per Band: 5.0GHz: 2400Mbps: 2.4GHz: 1200Mbps, Orthogonal Frequency Division Multiple Access (OFDMA), Multi-Gigabit Support, Target Wake Time (TWT), Basic Service Set Coloring (BSS Coloring), Bandsteering, Block SSID Broadcast, Ceiling mounting / Wall mounting, Bidir and MU-MIMO support. Warranty and Support : , 3 Years Centralized Management license included, 5 Years free latest firmware support, Rs. Make- Cisco/Netgear/Ruckus Complete in all respect with prior approval of EIC.

Supply and Installation: Smart Managed Gigabit PoE Switch with 8 × 10/100/1000BASE-T PoE ports and 2 × 100/1000 Mbps SFP ports, supporting IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3az, 802.3x and 802.3af/at standards: 20 Gbps switching capacity, 14.88 Mpps forwarding rate, 8K MAC address table, 4.1 Mbits packet buffer and 65 W total PoE power budget: supports IEEE 802.1Q VLAN with up to 256 static VLAN groups, STP/RSTP/MSTP, IEEE 802.3ad Link Aggregation, IGMP Snooping, LLDP/LLDP-MED, jumbo frames, port mirroring and 8 QoS queues per port: supports IPv4/IPv6 static routing, ACL, IEEE 802.1X, DHCP Snooping, ARP Inspection, IP-MAC-Port Binding, port security, storm control and DoS prevention: provides web-based, CLI, Telnet and SNMP management, along with firmware upgrade and configuration backup/restore: includes energy-saving functions and fanless operation: operates on 100–240 V AC, 50/60 Hz, with dimensions of 280 × 126 × 44 mm, weight of 0.95 kg, operating temperature of -5°C to 50°C and humidity of 0–95% RH. . Make- Cisco/D-Link/Juniper Complete in all respect with prior approval of EIC.

Supply and Installation: Category Patch Panel should be 24 Port 1U Size loaded with 24 port RJ-45 IO/Jack,Mounts in standard 19 inch racks,Patch panel should have rear cable manager for improvement management,Patch panel suitable for Category 6 keystone,Panel material should have SPCC with 1.5mm thickness and Black Color,Support bar material should have SPCC with 1.5mm thickness and Black Color,RJ-45 jack housing should be PBT plus Glass fiber UL94V-O and Contact brackets should be PBT plus Glass fiber UL94V-O,Rj-45 contact material should be phosphor bronze with nickel plated and plug contact area finish with 50 micro-inches Gold plated, Rj-45 jack life should be 700 times minimum,Operating temperature should be -10° Celsius to 60° Celsius.Make- D-Link/Molex/Commscope Complete in all respect with prior approval of EIC.

Supply and Installation: Category 6 patch cords 1 /2 Mtr with four pair twisted cable terminated with RJ45 modular plugs at both the ends,Patch Cord should have TIA/EIA 568C.2 standard.,Shall be backward compatible with Category 5 and Category 5e systems, Category 6 patch cord should be 100% factory made and performance tested,Category 6 patch cord length requires – 2 meter/ 1 meter,Color code for Patch Cord: Grey,Performance Characteristics ,Patch cord conductor should be 24 AWG, multi-strands ,Patch core conductor metal should be made from bare copper,Insulation material should be high density polyethylene,Patch cord jacket should be LSZH,Modular Connector/Plug Characteristics,Patch cord plug should be gold plated,Contact blade of plug should be made from copper / alloy,Insertion cycle should be 750 times,Temperature range should support from 10° Celsius to 60° Celsius.. Make- D-Link/Digisol/Commscope Complete in all respect with prior approval of EIC.