REPAIRS AND MAINT OF EXTERNAL WATER SUPPLY REPAIRS MAINT TO LT EXTERNAL ELECTRIFICATION AND REPAIRS MAINT SERVICING OF DG SETS LT PANELS AND EARTHING AT LIKABALI MIL STN UNDER GE 872 EWS

Amount

EARTH WORKS

Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Taking out/up and Laying of Water Mains, Cables, Electric Poles, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Excavating in Trenches, not exc. 1.50 Metre Wide and Depth exc. 1.50 Metre but not exc. 3.00 Metre for Electric Poles, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps along the Route of the Water Mains, Cable Lines, etc. with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

Drilling/Making Hole (Horizontally) under Roads/ Hardstanding, etc. by any means suitable for passing GI Tubing 40mm to 80mm bore (dia), complete all as specified and as directed.

M&L Cutting Existing Road not exc. 1.50 Metre in depth and not exc. 1.50 Metre wide including Making Good the Same with Cement Concrete 1:3:6 (40mm graded stone aggregate) 150mm thick on Top Layer, Returning, Filling in, Well Ramming and Levelling in Layers, etc. after Laying of Cable to match the Existing Surface Levels, complete all as specified and as directed. NOTE : Cement Concrete 1:3:6 (40mm graded stone aggregate) 150mm thick will be Measured & Paid separtely under appropriate Item.

REPAIRS/MAINT TO EXTERNAL WATER SUPPLY

Taking up or down Steel Tubing 25mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed.

Taking up or down Steel Tubing 32mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed.

Taking up or down Steel Tubing 40mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed.

Taking up or down Steel Tubing 50mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed.

Taking up or down Steel Tubing 63/65mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed.

Taking up or down Steel Tubing 80/90mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed.

Taking up or down Steel Tubing 100/110mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed.

Taking up or down DI Pipe 100mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed.

Supply & laying Galvanised Steel Tubing 25mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, laid in Trenches, complete all as specified and as directed.

Supply & laying Galvanised Steel Tubing 40mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, laid in Trenches, complete all as specified and as directed.

Supply & laying Galvanised Steel Tubing 80mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, laid in Trenches, complete all as specified and as directed.

Supply & laying Galvanised Steel Tubing 100mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, laid in Trenches, complete all as specified and as directed.

Supply & laying Ductile Iron Pipe 100mm bore (dia), Spigot & Socketed, Type K-9 including all Specials/ Fittings and jointed, laid in Trenches and Testing after laid, complete as all specified and as directed.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 25mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 32mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 50mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 63mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 90mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.

Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 110mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia), Plug type suitable for GI Pipe, Cast Copper alloy with Crutch and Butter-fly Handle, screwed for Iron Pipe including Taking down/out Unserviceable Bib Tap, complete all as specified and as directed.

S&F PP-R (Polypropylene Random Copolymer) Gate Valve 25mm bore (dia), Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed.

S&F PP-R (Polypropylene Random Copolymer) Gate Valve 32mm bore (dia), Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed.

S&F PP-R (Polypropylene Random Copolymer) Gate Valve 50mm bore (dia), Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed.

S&F PP-R (Polypropylene Random Copolymer) Gate Valve 63mm bore (dia), Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed.

M&L Cast Iron Butter-fly Valve 80mm bore (dia), Operation Cap, both Sides Flanged, ISI Marked (IS:13095 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts & Nuts and Testing against Leakage including Taking down Unserviceable Butter-fly Valve, complete all as specified and as directed.

M&L Cast Iron Non-Rising Sluice Valve 80mm bore (dia), both Ends Flanged, ISI marked and conforming to IS:14846-2000, Class PN-1.6 including Taking out/ down Unserviceable Non-Rising Sluice Valve, complete all as specified and as directed.

M&L Cast Iron Sluice Valve 80mm bore (dia), Operation-cap, both sides Flanged, ISI Marked (IS:14846-2000 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts & Nuts and Testing against Leakage including Taking out/ down Unserviceable Sluice Valve, complete all as specified and as directed.

M&L Cast Iron Sluice Valve 100mm bore (dia), Operation-cap, both sides Flanged, ISI Marked (IS:14846-2000 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts & Nuts and Testing against Leakage including Taking out/ down Unserviceable Sluice Valve, complete all as specified and as directed.

M&L Construction Brick Masonry Valve Chamber of Size 60x60x60 Cm (Internal Dimension of Chamber) with Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Foundation, One Brick thick Brick Walls in Cement Mortar 1:4, Rendering 15mm thick on Brick Walls in Cement Mortar 1:4 and all Internal Surfaces except PCC Foundation Bed, Externally upto 150mm below Normal Ground Level, providing Mild Steel Valve Chamber Cover 3.15mm thick with Hinges, Handle and Locking Arrangements with Mild Steel Angle Iron Frame 40x40x5.0mm on Top of Valve Chamber, Angle Iron Frame embedded in Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick including applying Two Coats of Black Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer after necessary preparation to all Steel Surfaces Painting, all necessary Earth Work i.e. Excavation in any type of Soil, Returning, Filling in and Removal of Surplus Soil to a distance not exc. 50.00 Metre including Demolition of Damaged Valve Chamber, complete all as specified and as directed.

M&L Construction Brick Masonry Valve Chamber of Size 100x100x100 Cm (Internal Dimension of Chamber) with Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Foundation, One Brick thick Brick Walls in Cement Mortar 1:4, Rendering 15mm thick on Brick Walls in Cement Mortar 1:4 and all Internal Surfaces except PCC Foundation Bed, Externally upto 150mm below Normal Ground Level, providing Mild Steel Valve Chamber Cover 3.15mm thick with Hinges, Handle and Locking Arrangements with Mild Steel Angle Iron Frame 40x40x5.0mm on Top of Valve Chamber, Angle Iron Frame embedded in Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick including applying Two Coats of Black Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer after necessary preparation to all Steel Surfaces Painting, all necessary Earth Work i.e. Excavation in any type of Soil, Returning, Filling in and Removal of Surplus Soil to a distance not exc. 50.00 Metre including Demolition of Damaged Valve Chamber, complete all as specified and as directed.

Dismantling Unserviceable/ Rusted Members/Parts (Approx 15.85 Quintal) from Pressed Steel Overhead Tank of Size 5.00x5.00x2.00 Metre having 10000 Gallon (45000 Litre) Capacity at 15.00 Metre High Staging by unscrewing Mild Steel Bolts, Nuts, Washers, etc., Disconnecting Rising Mains, Delivery and Drain Pipes, Refixing the same after Repaired including Making the Over Head Tank Fully Leak Proof and Testing, complete all as specified and as directed.

M&L Mild Steel Angle Iron 65x65x6.0mm as Frame work (Supports, Cross, etc.), of Pressed Steel Overhead Tank 15.00 Metre High Staging and similar work, conforming to Fe-290, Gde E-165, Fixing with Mild Steel Bolts, Nuts, Washers, etc., complete all as specified and as directed. NOTE : Mild Steel Bolts, Nuts, Washers, etc. will be Measured & Paid separately under appropriate Item.

M&L Mild Steel Angle Iron 50x50x6.0mm as Frame work (for Top Cover and 2.50 Metre long Ladder, etc.) of Pressed Steel Overhead Tank 15.00 Metre High Staging and similar work, conforming to Fe-290, Gde E-165, Fixing with Mild Steel Bolts, Nuts, Washers, etc., complete all as specified and as directed. NOTE : Mild Steel Bolts, Nuts, Washers, etc. will be Measured & Paid separately under appropriate Item.

M&L Mild Steel Angle Iron 40x40x6.0mm as Frame work (for Manhole Lid and Step[s of 2.50 Metre long Ladder, etc.) of Pressed Steel Overhead Tank 15.00 Metre High Staging and similar work, conforming to Fe-290, Gde E-165, Fixing with Mild Steel Bolts, Nuts, Washers, etc, complete all as specified and as directed NOTE : Mild Steel Bolts, Nuts, Washers, etc. will be Measured & Paid separately under appropriate Item.

M&L Pressed Steel Plates of Size 1225x1225x6.0mm thick (or nearest Size), Factory moulded/shaped as Bottom and Side Walls of Pressed Steel Overhead Tank 15.00 Metre High Staging and similar work, conforming to IS, Making Leak Proof with Lead Wools, Rubber Gaskets, Mild Steel Bolts, Nuts, Washers, etc., complete all as specified and as directed. NOTE : Cost of Lead Wools and Other Jointing Materials (as required/ ordered) will deem to be included in the Quoted Unit Rate. However, Mild Steel Bolts, Nuts, Washers, Rubber Gaskets, etc. will be Measured & Paid separately under appropriate Items.

M&L Mild Steel Sheets 3.15mm thick as Top Cover of Pressed Steel Overhead Tank 15.00 Metre High Staging and similar work, conforming to IS, Fixing with Mild Steel Bolts, Nuts, Washers, Hinges, etc., complete all as specified and as directed. NOTE : Cost of Mild Steel Hinges (as required/ ordered) will deem to be included in the Quoted Unit Rate. However, Mild Steel Bolts, Nuts, Washers, etc. will be Measured

M&L Mild Steel Box of Size 200x200x130mm, made out of 8.0mm thick Mild Steel Plates, conforming to Fe-290, Gde E-165, providing Holes for fixing Mild Steel Angles, etc, complete all as specified and as directed.

M&L Mild Steel Screw Bolts, Machine made (sizes of Bolts as per Site requirment /as ordred) with Hexagonal or Square Heads at One End and screwed the Other, or screwed Both Ends, Each screwed End to be fitted with 3.0mm thick Washers and One Hexagonal or Square Nut, complete all as specified and as directed.

S&F Rubber Gasket 6.0mm thick (sizes of Rubber Gasket as per Site requirment /as ordred), complete all as specified and as directed.

M&L Preparing & Removing Rusts, etc. from Surfaces of Pressed Steel Overhead Tank 46800 LITRE Capacity having 15.00 METRE High Steel Stagging by Rubbing with Wire Brush and Complete Cleaning, Applying Two Coats of Aluminium Paint on Outer Area of Tank and Steel Stagging of Pressed Steel Storage Water Tank and applying One Coat of Black Bituminous Paint (suitable for Drinking Water purpose) to Inside Walls of Storage Water Tank and all Connected Assesories like all GI Pipes, Valves, Other Fittings, etc., complete all as specified and as directed. NOTE : Materials viz Bamboos, Coconut String, Munj or other Equipments as required for construction of Temporary Structure on Outside of Sump will be arranged by the Contractor at his Own Arrangement & Cost and the same will be include in the Quoted Unit Rate. No Extra Amount shall be Paid separately on this account.

M&L Dewatering Water from Pressed Steel Storage Water Tank 10000 GALLON capacity, having 15.00 METRE High Steel Stagging, Cleaning and Removing all Mosses, Algae, Dirts, etc. from the Walls and Floor of Water Tank, Removal of Dirty Water with Sludges and disposed off from the Site as diredted, Rubbing Walls, Floor, Ceilling surfaces with Gunny Bag after sprinkling of Bleaching Powder Solution and Wash thoroughly with Fresh Water including Cleaning of Outlet Pipes, Stop Valves, Gate Valves by taking out Pipe Lines with Stop Valves, Gate Valves, etc. and all Accessories, Re-fixing the same after Cleaning including Float Valve with Float Arm to Original Position, Writing Letters "TANK CLEANED ON : DD.MM.YYYY" (i.e. Date of Cleaning), exc. 100mm but not exc. 200mm in Height and 15mm in Wide with White Paint on Black Back ground on the Front/Road Side/Face of the Tank, complete all as specified and as directed. NOTE : Materials viz Bamboos, Coconut String, Munj or other Equipments as required for construction of Temporary Structure on Outside of Steel Storage Water Tank will be arranged by the Contractor at his Own Arrangement & Cost and the same will be include in the Quoted Unit Rate. No Extra Amount shall be Paid separately on this account.

REPAIRS/MAINT TO PUMPS & MOTORS

M&L Lifting of Submersible Pump & Motor Assembly 12.5 HP capacity alongwith complete Column Pipes, Submersible Cable, Safety Rope, etc. from the existing Borewell by employing Chain Pulley Block, etc., Dismantling Column Pipes by Opening Nuts, Bolts, Pump & Motor, etc, Segregating & Stacking of Serviceable Column Pipes & Other Materials and Keep in Safe Custody for re-use, complete all as specified and as directed.

M&L Removing Submersible Pump & Motor Assembly 12.5 HP capacity to AGE E/M Store Yard at LIKABALI, Opening/Dismantling & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair Works involves, Cleaning of Cover and Parts as required, Transporting defective Submersible Pump & Motor Assembly to nearest Workshop, Repairing & Replacing of Unserviceable Parts, Reassembling Submersible Pump Motor Assembly after repaired, Transporting repaired Submersible Pump Motor Assembly back to Work Site, complete all as specified and as directed. NOTE :- (a) Spare Parts required to be replace will be Measured and Paid as "Supply only" under relevant Items. Cost of Labour Element involved for replacement of Parts will deem to include in the Quoted Unit Rate. (b) Any Minor repairs involved to make the Submersible Pump & Motor Assembly Functional, even if not notified by the Board of Officers, the same will be carry out by the Contractor without any Extra Cost to the Department. (c) The Cost of Minor Spares Parts/Items viz Nuts, Bolts, Washers, Gasket, etc. will deem to be include in the Quoted Unit Rate. (d) Rewinding of Submersible Motor, wherever invloves will be Measured and Paid separately under relevant Item.

M&L Dismantling Submersible Pump & Motor 12.5 HP capacity, Taking out burnt Windings, Cleaning of Slots of the Motor and Rewinding the same with Super Enamalled Copper insulated Wire of suitable Gauge and Weight as per existing including necessary Insulation Materials, Varnishing, Heating, Reassembling the Same and Testing for Smooth Functioning after Rewinding, complete all as specified and as directed.

Supply only Bush for Impellers, 'C' type, Part No. 1091 (as per existing/ as approved) suitable for Submersible Pump 12.5 HP capacity, complete all as specified and as directed.

Supply only Gun Metal Bush for Intermediate, Part No. 933.1 (as per existing/ as approved) suitable for Submersible Pump 12.5 HP capacity, complete all as specified and as directed.

Supply only Gun Metal Bush (Upper Part No. 1175, Lower Part No. 1176) (as per existing/ as approved) suitable for Submersible Motor 12.5 HP capacity, complete all as specified and as directed.

Supply only Gun Metal Impellers, Part No. 151 (as per existing/ as approved) suitable for Submersible Pump 12.5 HP capacity, complete all as specified and as directed.

Supply only Shaft made out of Stainless Steel having Standard size Complete Part No. 180 (as per existing/ as approved) suitable for Submersible Pump 12.5 HP capacity, complete all as specified and as directed.

Supply only Sleeve made out of Stainless Steel for Impeller, Part No. 2004 (as per existing/ as approved) suitable for Submersible Pump 12.5 HP capacity, complete all as specified and as directed.

Supply only Thurst Bearing for Part No. 1225 (as per existing/ as approved) suitable for Submersible Motor 12.5 HP capacity, complete all as specified and as directed.

Supply only Galvanised Iron Steel Pipe 65mm bore (dia), 3.0 Metre in Length as Column Pipe, ISI marked, having both Sides Painted, threaded both Ends including Socket duly screwed, complete all as specified and as directed.

Supply only PVC insulated, sheathed Stranded Copper Conductor Water Proof Cable, Flat, Cross-sectional Area 6.0 Sqmm, 3 Core, 1100 Volt grade, conforming to IS:694 for suitable for Sumbersible Pump & Motor Assembly 12.5 HP capacity, complete all as specified and as directed.

M&L Mild Steel Flat Iron Brackets, Cut to length, Bent to Shape as required, drilled and countersunk for screw, including welding Angles, as necessary, Gusset Plates, Riveting, etc.. not exc. 10.00 KG Each Brackets, conforming to Fe-290, Gde-E-165 for Holding Column Pipe, complete all as specified and as directed.

M&L Lowering down Submersible Pump & Motor Assembly 12.5 HP capacity (after Repaired & Testing of Functionability) alongwith Column Pipes of any Size and Length, Submersible Cable, Steel Wire Rope, etc. with the help of Chain Pulley Block and Tool & Plants, Testing on Completion, complete all as specified and as directed. NOTE : Serviceable Column Pipes and Other Materials, etc. obtained from Item No. 3.01 here-in-before will be reused. Unserviceable Column Pipes & Sumbersible Cable will be replaced with New Pipes & Cable respectively and the same will be Measured and Paid separately under appropriate Items as 'Supply only'.

S&F Pressure Gauge Diaphram type Range 0-7 Kg/Sq Cm (as approved) including Taking out/ down Unserviceable Pressure Gauge, complete all as specified and as directed.

S&F Deluxe Automatic Star Delta Starter suitable for 12.5 HP Motor (as approved), fixing to Existing Panel Board with necessary Fixing Arrangements and providing all Electric Connections including Taking down/out Unserviceable Star Delta Starter from Panel Board, complete all as specified and as directed.

REPAIRS/MAINT TO LT EXTERNAL ELECTRIFICATIONS

Dismantling unserviceable LT Steel Tubular Pole of any description and any size including Demolition Cement Concrete (if required on Ground) and Made Good disturbed Ground, complete all as specified and as directed. NOTE : Unserviceable Pole will be dismantled at Ground Level and disturbed Ground will Made Good as directed for which Earthwork, Demolition Cement Concrete, etc. will not be Measured and Paid separately.

Dismantling Cross Arms, Mild Steel Channel, Angle Section, Flat Iron, Mild Steel Rod, etc., complete all as specified and as directed.

Taking down unserviceable Insulator of any size and any description from LT Electric Poles or from any Situations, complete all as specified and as directed.

Taking down ACSR Conductor including Line Spacers of OH Electric Lines from LT Electric Poles of any size and capacity, complete all as specified and as directed.

Taking down unserviceable/rusted GI Earth Wire, Cradles Guards of any size and shape at any Position from LT Electric Poles of any size and capacity, complete all as specified and as directed.

Dismantling Stay Assembly complete of any description, complete all as specified and as directed. NOTE : Unserviceable Stay Assembly will be dismantled at Ground Level and disturbed Ground will Made Good as directed for which Earth Works, Demolition of Cement Concrete, etc. will not be Measured & Paid separately.

M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) in Copping of Electric Poles, etc., weathering slightly rounded or chamfered angle and throating, finishing all Exposed Faces of Concrete including necessary Formwork, complete all as specified and as directed.

M&L Steel Tubular Swaged Pole Type 410 SP-31 (9.0 Metre long) complete with Mild Steel Base Plate, Finial Taper Plug, Bolts, Nuts & Screws, etc. as specified including One coat Aluminium Paint over One Coat of Red Oxide Zinc Chrome Primer, providing 3 No. Band/ Strap with Paint Black/ Yellow Colour 300mm apart from Plinth Block and numbering of Pole/ Painting embedded portion of Pole with One coat of Bituminous Paint, complete all as specified and as directed. NOTE : Necessary Earth Work & PCC will be Measured and Paid separately under relevent Items.

M&L Cross Arms, Bracings, Supports, Clamps and Back Plates, fabricated from Structural Steel Sections including Nuts, Bolts, Washers, etc., welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated or directed and applying Two coats of Aluminium Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of Surfaces, complete all as specified and as directed.

S&F Insulator Pin type, 100mm height, 65mm dia for 1100 Volt grade, Porcelain, Vitreous, white, brown or green including One Galvanised Mild Steel Spindle Two Galvanised Iron Washer and One Galvanised Iron Nut, complete all as specified and as directed.

S&F Insulator Shackle type, Porcelain, Vitreious, white brown or green of size 100mm High & 115mm dia including Galvanised Mild Steel Straps of Section 31x5.0mm, 14mm dia Insulator Bolts, Nuts, Washer, etc. for Working Pressure 1100 Volt grade, complete all as specified and as directed.

S&F Insulator Loop type, Small in size, Vitreous Porcelain, white, borwn or green with Overall Dimensions 65x90mm, Clearance of Hole 16mm 1100 Volt grade, complete all as specified and as directed.

M&L ACSR Conductor of any size for LT Over Head Line including Stringing Conductor fixed on Poles and binding with Aluminium Binding Wire, etc., complete all as specified and as directed. NOTE : Sizes of Conductor will be as per Site requirement/ as directed.

M&L Restretching, Tightening & Fixing of ACSR Conductor of any size on LT Electric Poles including necessary Aluminium Binding Wire including Refixing of Connectors, PVC Sleeves for Jumper, etc. complete all as specified and as directed.

M&L Trimming/Cutting of Tree Branches of any girth/size and Clearing of LT OH Lines (any Nos. of ACSR Conductors, Earth Wire, etc.) upto 3.0 Metre distance, Removing Tree Branches from the Sites, complete all as specified and as directed.

M&L Galvanised Iron Wire 4.0mm dia (8 SWG) as Continuous Earth Wire, Guards and Cradles (hexagonal/rectangular), etc. and binding with and including GI Binding Wire 1.6mm dia, complete all as specified and as directed.

S&F PVC Fibre Separator for LT Line 1100 Volt Over Head Conductor 2/3/4-Wire System for Horizontal Spacing of Conductor complete with Nut and Bolts minimum 2 No. to prevent the Lines Touching Each Other on Heavy Winds as a Preventive Arrangement to the Existing System, complete all as specified and as directed.

S&F PVC Fibre Separator for LT Line 1100 Volt Over Head Conductor 5/6-Wire System for Horizontal Spacing of Conductor complete with Nut and Bolts minimum 2 No. to prevent the Lines Touching Each Other on Heavy Winds as a Preventive Arrangement to the Existing System, complete all as specified and as directed.

M&L Stay Assembly complete with all Accessories such as Mild Steel Galvanised Flat Iron Stay Clamp, Galvanised Stay Wire 7/4.0mm stranded, One Insulator Loop type Porcelain Vitreous (white, brown or green) Overall Dimensions 90x140mm and Clearance of Hole 25.5mm, Stay Grips, Mild Steel Galvanised Stay Bow, Thimbles Galvanised steel 14mm dia & 400mm long, 20mm dia Mild Steel Galvanised Stay Rod 1900mm long and Mild Steel Galvanised Stay Plate of size 300x300x6.0mm all as shown in Electrical Plate No. 1 of MES Schedule Part-I, complete all as specified and as directed. NOTE : Necessary Earth Work, Cement Concrete, etc. will be Measured and Paid separately under relevant Items.

S&F Danger Notice Plate of size 25x20 Cm for LT, made of 1.6 mm thick Mild Steel Sheet, Vitreous Enamelled White, Letters, Figures and Conventional Skull & Bones in Signal Red Colour and fixed with Mild Steel Vlamps, Bolts & Nuts of appoved size including Taking down unserviceable Danger Notice Plate, complete all as specified and as directed.

M&L Painting LT Pre-stressed Concrete Pole including Cross Arms, Channel, Flat Iron Clamps, etc. with Two coats of Cement Based Paints and Numbering of Code in letter size not less then 50mm in Black Paints and Painting of Pole with Strips 300mm high (5 Nos.) around the Pole with Two different Colour Synthetic Enamelled Paint for Pole 7.5 Metre height above Ground Level, complete all as specified and as directed.

M&L Painting LT Steel Tubular Pole including Cross Arms, Channel, Flat Iron Clamps, etc. with One coat of Aluminium Paints and Numbering of Code in letter size not less then 50mm in Black Paints and Painting of Pole with Strips 300mm high (5 Nos.) around the Pole with Two different Colour Synthetic Enamelled Paint for Pole 7.5 Metre height above Ground Level, complete all as specified and as directed.

REPAIRS/MAINT TO LT UG CABLE WORKS

Disconnecting & Taking down/out unserviceable LT Cable of any size and any description including GI Pipes, Bricks, etc. from Trenches, Floors, Poles, Walls, complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured & Paid under appropriate Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 10 Sqmm, 2 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 16 Sqmm, 4 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 25 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc, complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 35 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 50 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 70 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 95 Sqmm, 3½ Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L Taking down unserviceable LT Cable of any description (Size, Core, etc.), 1100 Volt grade from any Situation, finding out Cable Fault and Rectification of Cable Fault as ordered, Relaying/ Re-fixing the Cable after rectification, complete all as specified and as directed. NOTE : Necessary Earth works, Sand cushioning, Bricks protection & GI Pipe, etc. will be Measured and Paid separately under relevent Items.

M&L Cable Jointing Kit, Straight Through, Heat Shrink type complete with Jointing Materials and Accessories suitable for 1100 Volt Grade XLPE Armoured Aluminium Conductor Cable, Cross-sectional Area 25 Sqmm to 50 Sqmm, 3½/4.0 Core and Testing, complete all as specified and as directed.

M&L Cable Jointing Kit, Straight Through, Heat Shrink type complete with Jointing Materials and Accessories suitable for 1100 Volt Grade XLPE Armoured Aluminium Conductor Cable, Cross-sectional Area 70 Sqmm to 95 Sqmm, 3½/4.0 Core and Testing, complete all as specified and as directed.

M&L Cable Jointing Kit, Straight Through, Heat Shrink type complete with Jointing Materials and Accessories suitable for 1100 Volt Grade XLPE Armoured Aluminium Conductor Cable, Cross-sectional Area 120 Sqmm to 150 Sqmm, 3½/4.0 Core and Testing, complete all as specified and as directed.

M&L Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured.

Supply & laying Sub-class ‘B’ Bricks of Size 230x115x75 mm, Kiln burnt, for Covering to UG Cable as Protection, laid Flat, Transversally Width Equal to the Length of the Cable, complete all as specified and as directed.

M&L Galvanised Steel Tubing Pipe 40mm bore (dia), Light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.

M&L Galvanised Steel Tubing Pipe 50mm bore (dia), Light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.

M&L Galvanised Steel Tubing Pipe 80mm bore (dia), Light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.

M&L UG Cable Route Indicator, comprising of Mild Steel Round Bar 20mm dia as Leg 600mm long and welded to Mild Steel Plate 5.0mm thick of 100mm dia for Writing 1.1 KV LT UG Cable with Arrow mark, fixing with and including Cement Concrete 1:2:4 (20mm graded Stone aggregate) Block, 300x300x400mm in Size, grouting in Natural Ground along the Cable Route including necessary Earth Works (as per Site requirment), complete all as specified and as directed. NOTE : Cost of necessary Earthworks will deem to be included in the Quoted Unit Rate.

REPAIRS/MAINT TO LT PANEL BOARDS & EARTHING

S&F Air Circuit Breaker 800 Amp, 4 Pole, 415 Volt, 50 Hz, Front Operated with Thermal Magnetic Realease (Manual Drawout type) and fixing to existing Panel Board including Taking down/ out unserviceable ACB of any description, complete all as specified and as directed.

S&F On Load Change Over Switch 63 Amp rating, 4 Pole, 415 Volt (Side Handle Operated) in Sheet Metal Enclouser and Connecting up including Taking down/ out unserviceable Change Over Switch, complete all as specified and as directed.

S&F On Load Change Over Switch 100 Amp rating, 4 Pole, 415 Volt (Side Handle Operated) in Sheet Metal Enclouser and Connecting up including Taking down/ out unserviceable Change Over Switch, complete all as specified and as directed.

S&F On Load Change Over Switch (Front Operated), Open Execution 100 Amp rating, 4 Pole, 415 Volt and Connecting up including Taking down/out unservice-able Change Over Switch, complete all as specified and as directed.

S&F On Load Change Over Switch (Front Operated), Open Execution 160 Amp rating, 4 Pole, 415 Volt and Connecting up including Taking down/out unservice-able Change Over Switch, complete all as specified and as directed.

S&F MCCB 100 Amp 3 Pole, 25 kA, 415 Volt, 50 Hz including Outgoing and Incoming Cable Connection and fixing to existing Panel Board including Taking down/out unserviceable MCCB, complete all as specified and as directed.

S&F MCCB 125 Amp 3 Pole, 25 kA, 415 Volt, 50 Hz, SKB-1 including Outgoing and Incoming Cable Connection and fixing to existing Panel Board including Taking down/out unserviceable MCCB, complete all as specified and as directed.

S&F MCCB 250 Amp 3 Pole, 35 kA, 415 Volt, 50 Hz, DN2-250D including Outgoing and Incoming Cable Connection and fixing to existing Panel Board including Taking down/out unserviceable MCCB, complete all as specified and as directed.

S&F MCCB 63 Amp 4 Pole, 25 kA, 415 Volt, 50 Hz including Outgoing and Incoming Cable Connection and fixing to existing Panel Board including Taking down/out unserviceable MCCB, complete all as specified and as directed.

S&F MCCB 100 Amp 4 Pole, 36 kA, 415 Volt, Adjustable Thermal (80%-100%), (Ics=100%) and fixing to existing Panel Board including Taking down/ out unserviceable MCCB, complete all as specified and as directed.

S&F MCCB 250 Amp 4 Pole, 36 kA, 415 Volt, Adjustable Thermal (80%-100%), (Ics=100%) and fixing to existing Panel Board including Taking down/ out unserviceable MCCB, complete all as specified and as directed.

S&F MCCB 400 Amp 4 Pole, 50 kA, 415 Volt, 50 Hz, SKB-4 including Outgoing and Incoming Cable Connection and fixing to existing Panel Board including Taking down/out unserviceable MCCB, complete all as specified and as directed.

M&L Repairing broken Door, Locking Arrangements, Hinges, etc. of LT Panel/ Feeder Pillar/ Pole Box, Indoor/ Outdoor type of any size, necessary welding, drilling as reqiured, Replacing Door, Locking Arrangements, Hinges, etc., complete all as specified and as directed.

M&L Cleaning, Scraping of Exposed Surfaces of LT Panel/ Feeder Pillar /Pole Box, Indoor/ Outdoor Type and applying One coat of Synthetic Enamel Paint (Paint & Shade as approved) with Spray Painting Machine including Writing MES No. and Machine No. with Black Paint, Letters 50mm High and 15mm Wide, complete all as specified and as directed.

S&F Synthetic Insulation Mat of Size 2000x1000x12mm thick (as approved), ISI marked and suitable for 1100 Volts Grade including Taking out unserviceable Insulation Mat of any description, complete all as specified and as directed.

Supply, Installation & Commissioning Bus-bar Chamber 600x600x200mm in Size, Outdoor type, made out of 2.0mm thick CRCA Sheet with Angle Iron Frame 45x45x6.0mm and Locking Arrangement, having 4 No. Copper Bus-bar Strip 200 Amp rating and fixing on Porcelain Insulators Inside the Chamber and 01 No. MCCB 125 Amp, 4 Pole, 16 kA, 415 Volt as Incomer, both Inside and Outside of Bus-bar Chamber Painted with Two Coats of Synethetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer and Fixing with Mild Steel Bolts, Nuts, Washers, etc. on Cement Concrete 1:2:4 (20mm graded Stone aggregate) Platform (minimum 450mm in Height from Natural Ground Level) and grouting Mild Steel Angle Iron Legs in Floor, Providing all Electric Connections and Testing including Taking down/ out unserviceable Bus-bar Chamber of any description, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including Taking down/out Unserviceable Earthing of any description, complete all as per specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Strip of size 32x6.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including Taking Taking down/out Unserviceable Earthing of any description, complete all as per specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.

M&L Earthing with Copper Earth Plate Electrode 600x600x3.15mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Copper Earth Strip of size 20x3.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including Taking Taking down/out Unserviceable Earthing of any description, complete all as per specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.

REPAIRS/MAINT TO DG SETS

M&L Repairs, Maintenance & Servicing to DG Set 30 KVA Capacity of MAKE : KIRLOSKAR, complete all as specified and as directed comprising with the following Works:- (a) Replacement of all Filters, Lubricating Oil. (b) Checking of Belt Tension, Battery Connections and Topping up Distilled Water (if required), External Bolts and Nuts and its Tightening, Safety Units and its Electrical Connections, Alternator Cable Connections, Engine Control Wirings (c) Carry out necessary Tappet Clearance, if required. (d) Cleaning of Fuel Lines, Inlet Air Lines and Exhaust Liner Radiator Fins. (e) Check functioning of Changing Alternator. (f) Engine Safety viz. High Water Temperature Gauge, Oil Pressure Gauge, Oil Temperature Gauge and High Speed Gauge shall be checked for their functions and repaired/replaced if required. (g) Coolant Level and Conditioning of Coolant shall be checked and refilled if required. (h) The Governor shall be Checked and Tuned for Proper Functioning. (j) Check for Leaks if any and shall be rectified. (k) The Engine shall be Run on NO LOAD or at AVAILABLE LOAD, Check any Leakage and Abnormal Noise. If any such abnormality Noticed the same shall be Diagnosed and Remedial Action shall be taken to removed the casues. NOTE:- (a) Spare Parts, Consumable Items such as Distilled Water, Lube Oil, Grease, etc. will be Measured & Paid as 'Supply only' under appropriate Items. (b) Quantitites mentioned here-in-after are Provisional.

Supply only Air Filter Assembly (as per existing/ as approved) for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only AVR (as per existing/ as approved) for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Bearing for Cooling Fan and Fan Belt (as per existing/ as approved) for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Controler Model No. KG934 (as per existing/ as approved) for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Cooling Fan (as per existing/ as approved) for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Door Hinges with Nut & Bolts (as per existing/ as approved) for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Fuel Filer Assembly (as per existing/ as approved) for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Fuel Pipe (as per existing/ as approved) for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only Oil Filer Assembly (as per existing/ as approved) for DG Set 30 KVA capacity, complete all as specified and as directed.

Supply only V Belt (as per existing/ as approved) for DG Set 30 KVA capacity, complete all as specified and as directed.

M&L Repairs, Maintenance & Servicing to DG Set 62.5 KVA Capacity of MAKE : ASHOK LEYLAND/ KIRLOSKAR, complete all as specified and as directed comprising with the following Works:- (a) Replacement of all Filters, Lubricating Oil. (b) Checking of Belt Tension, Battery Connections and Topping up Distilled Water (if required), External Bolts and Nuts and its Tightening, Safety Units and its Electrical Connections, Alternator Cable Connections, Engine Control Wirings (c) Carry out necessary Tappet Clearance, if required. (d) Cleaning of Fuel Lines, Inlet Air Lines and Exhaust Liner Radiator Fins. (e) Check functioning of Changing Alternator. (f) Engine Safety viz. High Water Temperature Gauge, Oil Pressure Gauge, Oil Temperature Gauge and High Speed Gauge shall be checked for their functions and repaired/replaced if required. (g) Coolant Level and Conditioning of Coolant shall be checked and refilled if required. (h) The Governor shall be Checked and Tuned for Proper Functioning. (j) Check for Leaks if any and shall be rectified. (k) The Engine shall be Run on NO LOAD or at AVAILABLE LOAD, Check any Leakage and Abnormal Noise. If any such abnormality Noticed the same shall be Diagnosed and Remedial Action shall be taken to removed the casues. NOTE:- (a) Spare Parts, Consumable Items such as Distilled Water, Lube Oil, Grease, etc. will be Measured & Paid as 'Supply only' under appropriate Items. (b) Quantitites mentioned here-in-after are Provisional.

Supply only Air Filter Assembly (as per existing/ as approved) for DG Set 62.5 KVA capacity, complete all as specified and as directed.

Supply only AVR (as per existing/ as approved) for DG Set 62.5 KVA capacity, complete all as specified and as directed.

Supply only Bearing for Cooling Fan and Fan Belt (as per existing/ as approved) for DG Set 62.5 KVA capacity, complete all as specified and as directed.

Supply only Controler Model No. KG934/GC-1202 (as per existing/ as approved) for DG Set 62.5 KVA capacity, complete all as specified and as directed.

Supply only Cooling Fan (as per existing/ as approved) for DG Set 62.5 KVA capacity, complete all as specified and as directed.

Supply only Door Hinges with Nut & Bolts (as per existing/ as approved) for DG Set 62.5 KVA capacity, complete all as specified and as directed.

Supply only Fuel Filer Assembly (as per existing/ as approved) for DG Set 62.5 KVA capacity, complete all as specified and as directed.

Supply only Fuel Pipe (as per existing/ as approved) for DG Set 62.5 KVA capacity, complete all as specified and as directed.

Supply only Oil Filer Assembly (as per existing/ as approved) for DG Set 62.5 KVA capacity, complete all as specified and as directed.

Supply only V Belt (as per existing/ as approved) for DG Set 62.5 KVA capacity, complete all as specified and as directed.

M&L Repairs, Maintenance & Servicing to DG Set 125 KVA Capacity of MAKE : ASHOK LEYLAND/ KIRLOSKAR/ KIRLOSKAR GREEN, complete all as specified and as directed comprising with the following Works:- (a) Replacement of all Filters, Lubricating Oil. (b) Checking of Belt Tension, Battery Connections and Topping up Distilled Water (if required), External Bolts and Nuts and its Tightening, Safety Units and its Electrical Connections, Alternator Cable Connections, Engine Control Wirings (c) Carry out necessary Tappet Clearance, if required. (d) Cleaning of Fuel Lines, Inlet Air Lines and Exhaust Liner Radiator Fins. (e) Check functioning of Changing Alternator. (f) Engine Safety viz. High Water Temperature Gauge, Oil Pressure Gauge, Oil Temperature Gauge and High Speed Gauge shall be checked for their functions and repaired/replaced if required. (g) Coolant Level and Conditioning of Coolant shall be checked and refilled if required. (h) The Governor shall be Checked and Tuned for Proper Functioning. (j) Check for Leaks if any and shall be rectified. (k) The Engine shall be Run on NO LOAD or at AVAILABLE LOAD, Check any Leakage and Abnormal Noise. If any such abnormality Noticed the same shall be Diagnosed and Remedial Action shall be taken to removed the casues. NOTE:- (a) Spare Parts, Consumable Items such as Distilled Water, Lube Oil, Grease, etc. will be Measured & Paid as 'Supply only' under appropriate Items. (b) Quantitites mentioned here-in-after are Provisional.

Supply only Air Filter Assembly (as per existing/ as approved) for DG Set 125 KVA capacity, complete all as specified and as directed.

Supply only AVR (as per existing/ as approved) for DG Set 125 KVA capacity, complete all as specified and as directed.

Supply only Bearing for Cooling Fan and Fan Belt (as per existing/ as approved) for DG Set 125 KVA capacity, complete all as specified and as directed.

Supply only Controler Model No. KG934 (as per existing/ as approved) for DG Set 125 KVA capacity, complete all as specified and as directed.

Supply only Cooling Fan (as per existing/ as approved) for DG Set 125 KVA capacity, complete all as specified and as directed.

Supply only Door Hinges with Nut & Bolts (as per existing/ as approved) for DG Set 125 KVA capacity, complete all as specified and as directed.

Supply only Fuel Filer Assembly (as per existing/ as approved) for DG Set 125 KVA capacity, complete all as specified and as directed.

Supply only Fuel Pipe (as per existing/ as approved) for DG Set 125 KVA capacity, complete all as specified and as directed.

Supply only Oil Filer Assembly (as per existing/ as approved) for DG Set 125 KVA capacity, complete all as specified and as directed.

Supply only V Belt (as per existing/ as approved) for DG Set 125 KVA capacity, complete all as specified and as directed.

M&L Repairs, Maintenance & Servicing to DG Set 160 KVA Capacity of MAKE : KIRLOSKAR, complete all as specified and as directed comprising with the following Works:- (a) Replacement of all Filters, Lubricating Oil. (b) Checking of Belt Tension, Battery Connections and Topping up Distilled Water (if required), External Bolts and Nuts and its Tightening, Safety Units and its Electrical Connections, Alternator Cable Connections, Engine Control Wirings (c) Carry out necessary Tappet Clearance, if required. (d) Cleaning of Fuel Lines, Inlet Air Lines and Exhaust Liner Radiator Fins. (e) Check functioning of Changing Alternator. (f) Engine Safety viz. High Water Temperature Gauge, Oil Pressure Gauge, Oil Temperature Gauge and High Speed Gauge shall be checked for their functions and repaired/replaced if required. (g) Coolant Level and Conditioning of Coolant shall be checked and refilled if required. (h) The Governor shall be Checked and Tuned for Proper Functioning. (j) Check for Leaks if any and shall be rectified. (k) The Engine shall be Run on NO LOAD or at AVAILABLE LOAD, Check any Leakage and Abnormal Noise. If any such abnormality Noticed the same shall be Diagnosed and Remedial Action shall be taken to removed the casues. NOTE:- (a) Spare Parts, Consumable Items such as Distilled Water, Lube Oil, Grease, etc. will be Measured & Paid as 'Supply only' under appropriate Items. (b) Quantitites mentioned here-in-after are Provisional.

Supply only Air Filter Assembly (as per existing/ as approved) for DG Set 160 KVA capacity, complete all as specified and as directed.

Supply only AVR (as per existing/ as approved) for DG Set 160 KVA capacity, complete all as specified and as directed.

Supply only Bearing for Cooling Fan and Fan Belt (as per existing/ as approved) for DG Set 160 KVA capacity, complete all as specified and as directed.

Supply only Controler Model No. KG934 (as per existing/ as approved) for DG Set 160 KVA capacity, complete all as specified and as directed.

Supply only Cooling Fan (as per existing/ as approved) for DG Set 160 KVA capacity, complete all as specified and as directed.

Supply only Door Hinges with Nut & Bolts (as per existing/ as approved) for DG Set 160 KVA capacity, complete all as specified and as directed.

Supply only Fuel Filer Assembly (as per existing/ as approved) for DG Set 160 KVA capacity, complete all as specified and as directed.

Supply only Fuel Pipe (as per existing/ as approved) for DG Set 160 KVA capacity, complete all as specified and as directed.

Supply only Oil Filer Assembly (as per existing/ as approved) for DG Set 160 KVA capacity, complete all as specified and as directed.

Supply only V Belt (as per existing/ as approved) for DG Set 160 KVA capacity, complete all as specified and as directed.

S&F Asbestos Rope (as approved) including Taking down/out unserviceable Asbestos Rope, complete all as specified and as directed.

S&F Battery 12 Volt, 100 AH Capacity (as approved) and Providing all Electrical Connection including Taking down/out unserviceable Battery, complete all as specified and as directed.

S&F Battery Copper Lead with Brass Clamps, Bolts & Nuts (as approved) for DG Set of any Capacity, Make, Type and connecting up including Taking down/ out unserviceable Battery Lead, complete all as specified and as directed.

S&F Battery Terminal of Copper/Brass (as per existing/ as approved) and connecting up including Taking down/out unserviceable Battery Terminal, complete all as specified and as directed.

S&F Oil Safety Control (as per existing/ as approved) for DG Set of any Capacity, Make, Type and connecting up including Taking down/out unserviceable Oil Safety Control, complete all as specified and as directed.

S&F Solenoid Switch Assembly (as per existing/ as approved) for DG Set of any Capacity, Make, Type and connecting up including Taking down/out unserviceable Solenoid Switch Assembly, complete all as specified and as directed.

S&F Water Safety Control (as per existing/ as approved) for DG Set of any Capacity, Make, Type and connecting up including Taking down/out unservice-able Water Safety Control, complete all as specified and as directed.

S&F Water Temperature Gauge (as per existing/ as approved) for DG Set of any Capacity, Make, Type and connecting up including Taking down/out unservice-able Water Temperature Gauge, complete all as specified and as directed.

S&F Toggle Switch 3-way, Double Pole (as per existing/ as approved) and connecting up including Taking down/out unserviceable Toggle Switch, complete all as specified and as directed.

Supply & Filling Coolant for Radiators as approved), complete all as specified and as directed. MAKE : KIRLOSKAR or as approved by GE

Supply & Filling Engine Oil 20 W/ 40 Grade as approved), complete all as specified and as directed. MAKE : CASTROL CRB PLUS or as approved by GE

M&L Cleaning of Radiator of any capacity after Opening all Nuts, Bolts, etc. by dismounting, Re-mounting after Cleaning with Chemical and Tightening of Nuts, Bolts, etc. including Straightening of Radiator Fins with suitable Tools, complete all as specified and as directed.

M&L Repairing & Cleaning of Diesel Tank with suitable Materials after disconnecting Fuel Line, Opening of all Nuts, Bolts, etc., Re-fixing the same after satisfactory Repairing including necessary Welding (if required), etc., complete all as specified and as directed.

M&L Disconnecting all Electrical Cable Connection from the Dynamo Assembly and Taking down the Dynamo Assembly for Carry out Repairs and Complete Overhauling the System including Replacing the Unserviceable Parts like Carbon Bushes, Bearings, Armature, Burnt out coils, etc., Re-assambling & Re-fixing the Dynamo Assembly to Original Position and re-connecting all Electrical Cable Connections & Testing for DG Set 25 KVA to 62.5 KVA Capacity of Make : Ashok Leyland/ Kirloskar, complete all as specified and as directed.

M&L Disconnecting all Electrical Cable Connection from the Dynamo Assembly and Taking down the Dynamo Assembly for Carry out Repairs and Complete Overhauling the System including Replacing the Unserviceable Parts like Carbon Bushes, Bearings, Armature, Burnt out coils, etc., Re-assambling & Re-fixing the Dynamo Assembly to Original Position and re-connecting all Electrical Cable Connections & Testing for DG Set above 62.5 KVA to 160 KVA Capacity of Make : Ashok Leyland/ Kirloskar, complete all as specified and as directed.

ms singh construction