Renovation and replacement of damaged electric installation at Water Treatment Plant Alusteng. Under Languishing Programmme

Amount

Complete rewinding of 12HP, 3 Phase motor of flash mixer and Alum pack by way of replacement of worn out coil, bearing, nuts bolts etc to make the motor fully functional. The job includes greasing of parts, painting of surface with two coats of primer and metal paint of approved quality to give an even shade. The job includes assembling of the motor parts carrying out repairs and all carriages up to the workshop and from workshop to site and testing, commissioning and trial run for a period of one month on full load. The job is to be carried out as per the directions of site in-charge. (Complete job)

Providing and installation and successful testing and commissioning of oil immersed starters for Air blowers of Crompton, Havells or Star Delta make complete for capacity of 5HP motor including necessary wiring and carriages up to site of work. The job is to be carried out as per the directions of site in-charge. (Complete job)

Providing and fixing of 63 Amp 3 Pole MCCB fixed with a fixed magnetic top to handle large current burst in power of reputed make Havells, Crompton, GM and the job includes trial run for one month and all carriages up to site of work. (Complete job)

Providing & fixing of 30 watt LED lights for plant premises and approach road from plant to PST site corresponding to IS/IEC specification of make of standard/international repute including necessary 1.5mm2 wiring single pole, 10Ampere MCB’s, side brackets including clippings, nuts bolts and other allied electric accessories and making good the walls if necessary after fixing of lights. The job includes all carriage, labour, T&P charges, successful installation, testing and commissioning and for a trial run for a period of one month. The job is to be paid in fitted and fixed form. (All complete)

Complete restoration of damages to be caused to the electric installation due to dismantling of roofing of Alum Store for construction of gang hut including replacement of damaged conduits, faulty wiring MCBs, switch, sockets and temporary shifting of panel board and re-fixing after completion of construction work. The job is to be carried out as per the directions of site in-charge. (Complete Job).

Revamping of electrification of rest house/JE’s quarters/staff hut by way of replacement of worn out fittings and fixtures including wiring of lighting with 1.5mm and heating 4mm including cost of switches, sockets of approved brand viz Havells, Siemens, GM’s including provision for inverter fittings complete. (Modular)

Heating point.

Lighting point.

Replacement of worn out cable by way of providing and fixing of new service cable. (7/16 copper wire)

Providing, fixing and installation of 10 HP Horizontal pumping unit for backwash tank of staging height upto 15mtrs. Design/supply/installtion/testing & commissioning of horizontal pumping unit. The Specifications of the Horizontal pumping unit shall be as under: Pump: Discharge : 5000 GPH Dynamic head : 12 meters Type : Split casing horizontal Impeller : Cast iron Shaft : Stainless Steel Pump casing : Cast iron Speed : 1440-1475 Rpm Make : Kirloskar/CRI/ABB Crompton Wiring: Copper Type : Squirrel cage induction motor, 3 phase, 4 pole, 415±15%, 50 Hz, AC supply. Base frame : the pump and motor shall be mounted on MS common base frame of suitable size thickness duly fitted with T type/J type foundation bolts with nuts & washers so that the pumping unit is to be fitted on the foundation block for vibration free operation. (complete job)

Hydro Engineers

M/S MOHAMMAD ASLAM MIR AND CO.

M/S SHAH ELECTRICALS and MECHANICAL WORKS

AMIR ALI