Providing and fixing M.S. fabricated portable cabin at various mine premises of Gouri Pouni A and Pouni II expansion OCM under Gouri Pouni Sub Area

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

MS Fabricated Portable Office Container : - Providing and fixing MS Fabricated Portable Office container or cabin of size 40 ' Length x 10' Width x 8.50 ' Height with which includes all necessary fittings and 5 nos aluminium powder coated sliding window 3'x3' with safty grill canopy above the all the windows. Electric fittings : - Led Tube 5 Nos , Door light 1 no , Cabin fan 4 nos , MCB single pole 4 Nos , AC point - 2 Nos , Power point 6 nos ( Each 2 swithces and 2 Sockets ) . Western Toilets Partition of Size 6'x4' : - which includes 4 mm thick ACP sheet internal wall paneling with pVC Door 1 Nos . Toilet Fitting :- WC & Helth , faucet gun 1 Nos , Water Tap SS 1 Nos , Flush tank 1 Nos , Hand wash basin 1 Nos , Wash basin tap SS 1 Nos , Overhead tank frame 1 Nos , and all necessary internal plumbing & electric fittings Electric Fittings : - Led Tube 1 Nos , Lower with Exhaust fan of 150 CFM 1 Nos . Including Loading , Transportation , Unloading & Stacking and Installation at Site Complete. Technical Specification FOR ( MS Fabricated Portable Office Container ) : - Bottom Frame : - 100 x 50 C- channel & 100 x 50 mm specially formed MS Square tubes. Top Frame :- Top frame made of 50 x 50 mm , 50x25 mm , 25x25 mm specially formed MS Squre tubes. Stiffeners Bottom : - 100 x 50 mm , 50 x 50 mm MS Square Pipes. Stiffeners Top : - 50 x 50 mm , 50 x 25 & 25 x 25 mm MS Square tubes . Side Wall Stiffeners : - Specially formed 50 x 50 , 50 x 25 mm 1.20 mm MS Square tubes.Panelling Outside :- 1.20 mm specially corrugated MS sheet of 18 G welded on MS Structure Frame. Slanted Roof Outside : - 1.20 mm thick slanted roof with specially formed rain gutters or water channel of MS sheet of 18 G welded on MS structure frame . Internal Wall Panelling : - Pre-laminated MDF Board of 8 mm & all vertical & Horizontal corners will be neatly & smoothly finished with aluminium sections for internal walls & ceiling. Insulation : - Thermal insulation of glass wool of density 48 Kg/ 50 mm inside roof & 25 mm glass wool for side walls. Bottom Flooring : - 18 mm bison board panels & 1.2 mm thick PVC Vinyl Carpet shall be fixed by means of self tapping screw shall be fixed on the floor. Aluminium Window : - Aluminium Powder coated sliding window in each container with 4 mm thick glass for all windows with safty grills & canopy above the windows. MS Door : - Door shall be external opening type made up of same material as wall with std. hardware lock & handle & canopy above the windows. MS Door : - Door shall be external opening type made up of same material as wall with std hardware lock & hanle & canopy above the door Wiring : - Wiring shall be done using PVC conduit & fire resisrance wires of ISI quality suitable for 240 V single phase AC supply , 1.50 sqmm , 2.5 sqmm thick copper cable for light & fan fittings , 6 amps switch & socket , 4 mm thick cable for main electric supply with MCB. . Electric Fittings : - LED tube light , Door light , Cabin Fan , AC point , power points , switches & socket s ( ISI Mark ) Outside Painting : - Phosphate the cabin externally and painting with coat of primer & Two coat of corrosion free paint. Hooks : - Specially formed 10' x 4 ' 16 mm thick MS hooks for easy lifting & shifting.

MS Fabricated Portable Office Container : - Providing and fixing MS Fabricated Portable Office container or cabin of size 30 ' Length x 10' Width x 8.5 ' Height with which includes all necessary fittings and 4 nos aluminium powder coated sliding window 3'x3' with safty grill canopy above the all the windows. Electric fittings : - Led Tube 4 Nos , Door light 1 no , Cabin fan 3 nos , MCB single pole 4 Nos , AC point - 1 Nos , Power point 6 nos ( Each 2 swithces and 2 Sockets ). Western Toilets Partition of Size 6'x4' : - which includes 4 mm thick ACP sheet internal wall paneling with pVC Door 1 Nos . Toilet Fitting :- WC & Helth faucet gun 1 Nos , Water Tap SS 1 Nos , Flush tank 1 Nos , Hand wash basin 1 Nos , Wash basin tap SS 1 Nos , Overhead tank frame 1 Nos , and all necessary internal plumbing & electric fittings. Electric Fittings : - Led Tube 1 Nos , Lower with Exhaust fan of 150 CFM 1 Nos . Including Loading , Transportation , Unloading & Stacking and Installation at Site Complete. Technical Specification FOR ( MS Fabricated Portable Office Container ) : - Bottom Frame : - 100 x 50 C- channel & 100 x 50 mm specially formed MS Square tubes. Top Frame :- Top frame made of 50 x 50 mm , 50x25 mm , 25x25 mm specially formed MS Squre tubes. Stiffeners Bottom : - 100 x 50 mm , 50 x 50 mm MS Square Pipes. Stiffeners Top : - 50 x 50 mm , 50 x 25 & 25 x 25 mm MS Square tubes . Side Wall Stiffeners : - Specially formed 50 x 50 , 50 x 25 mm 1.20 mm MS Square tubes.Panelling Outside :- 1.20 mm specially corrugated MS sheet of 18 G welded on MS Structure Frame. Slanted Roof Outside : - 1.20 mm thick slanted roof with specially formed rain gutters or water channel of MS sheet of 18 G welded on MS structure frame . Internal Wall Panelling : - Pre-laminated MDF Board of 8 mm & all vertical & Horizontal corners will be neatly & smoothly finished with aluminium sections for internal walls & ceiling. Insulation : - Thermal insulation of glass wool of density 48 Kg/ 50 mm inside roof & 25 mm glass wool for side walls. Bottom Flooring : - 18 mm bison board panels & 1.2 mm thick PVC Vinyl Carpet shall be fixed by means of self tapping screw shall be fixed on the floor. Aluminium Window : - Aluminium Powder coated sliding window in each container with 4 mm thick glass for all windows with safty grills & canopy above the windows. MS Door : - Door shall be external opening type made up of same material as wall with std. hardware lock & handle & canopy above the windows. MS Door : - Door shall be external opening type made up of same material as wall with std hardware lock & hanle & canopy above the door Wiring : - Wiring shall be done using PVC conduit & fire resisrance wires of ISI quality suitable for 240 V single phase AC supply , 1.50 sqmm , 2.5 sqmm thick copper cable for light & fan fittings , 6 amps switch & socket , 4 mm thick cable for main electric supply with MCB. . Electric Fittings : - LED tube light , Door light , Cabin Fan , AC point , power points , switches & socket s ( ISI Mark ) Outside Painting : - Phosphate the cabin externally and painting with coat of primer & Two coat of corrosion free paint. Hooks : - Specially formed 10' x 4 ' 16 mm thick MS hooks for easy lifting & shifting.

MS Fabricated Portable Office Container : - Providing and fixing MS Fabricated Portable Office container or cabin of size 20 ' Length x 10' Width x 8.50 ' Height with which includes all necessary fittings and 3 nos aluminium powder coated sliding window 3'x3' with safty grill canopy above the all the windows. Electric fittings : - Led Tube 3 Nos , Door light 1 no , Cabin fan 2 nos , MCB single pole 2 Nos , AC point - 1 Nos , Power point 3 nos ( Each 2 swithces and 2 Sockets ). Western Toilets Partition of Size 6'x4' : - which includes 4 mm thick ACP sheet internal wall paneling with pVC Door 1 Nos . Toilet Fitting :- WC & Helth , faucet gun 1 Nos , Water Tap SS 1 Nos , Flush tank 1 Nos , Hand wash basin 1 Nos , Wash basin tap SS 1 Nos , Overhead tank frame 1 Nos , and all necessary internal plumbing & electric fittings Electric Fittings : - Led Tube 1 Nos , Lower with Exhaust fan of 150 CFM 1 Nos . Including Loading , Transportation , Unloading & Stacking and Installation at Site Complete. Technical Specification FOR ( MS Fabricated Portable Office Container ) : - Bottom Frame : - 100 x 50 C- channel & 100 x 50 mm specially formed MS Square tubes. Top Frame :- Top frame made of 50 x 50 mm , 50x25 mm , 25x25 mm specially formed MS Squre tubes. Stiffeners Bottom : - 100 x 50 mm , 50 x 50 mm MS Square Pipes. Stiffeners Top : - 50 x 50 mm , 50 x 25 & 25 x 25 mm MS Square tubes . Side Wall Stiffeners : - Specially formed 50 x 50 , 50 x 25 mm 1.20 mm MS Square tubes.Panelling Outside :- 1.20 mm specially corrugated MS sheet of 18 G welded on MS Structure Frame. Slanted Roof Outside : - 1.20 mm thick slanted roof with specially formed rain gutters or water channel of MS sheet of 18 G welded on MS structure frame . Internal Wall Panelling : - Pre-laminated MDF Board of 8 mm & all vertical & Horizontal corners will be neatly & smoothly finished with aluminium sections for internal walls & ceiling. Insulation : - Thermal insulation of glass wool of density 48 Kg/ 50 mm inside roof & 25 mm glass wool for side walls. Bottom Flooring : - 18 mm bison board panels & 1.2 mm thick PVC Vinyl Carpet shall be fixed by means of self tapping screw shall be fixed on the floor. Aluminium Window : - Aluminium Powder coated sliding window in each container with 4 mm thick glass for all windows with safty grills & canopy above the windows. MS Door : - Door shall be external opening type made up of same material as wall with std. hardware lock & handle & canopy above the windows. MS Door : - Door shall be external opening type made up of same material as wall with std hardware lock & hanle & canopy above the door Wiring : - Wiring shall be done using PVC conduit & fire resisrance wires of ISI quality suitable for 240 V single phase AC supply , 1.50 sqmm , 2.5 sqmm thick copper cable for light & fan fittings , 6 amps switch & socket , 4 mm thick cable for main electric supply with MCB. . Electric Fittings : - LED tube light , Door light , Cabin Fan , AC point , power points , switches & socket s ( ISI Mark ) Outside Painting : - Phosphate the cabin externally and painting with coat of primer & Two coat of corrosion free paint. Hooks : - Specially formed 10' x 4 ' 16 mm thick MS hooks for easy lifting & shifting.

MS Fabricated Portable Security Cabin / Container : - Providing and fixing MS Fabricated Portable Security Cabin / container or cabin of size 6 ' Length x 6' Width x 8.50 ' Height this includes all necessary electric fittings . Two tracks aluminium powder coated sliding window of size 4'x3' - 1 nos , rigid fixed glass of size 3 x 3 ' - 2 nos . Electric fittings : - Led Tube light 1 Nos , Door light 1 no , Cabin fan 1 nos , MCB single pole 1 Nos , Power point 6amps - 1 nos ( Each 2 swithces and 2 Sockets ) & linear work table with power point below the sliding window on the length side. Including Loading , Transportation , Unloading & Stacking and Installation at Site Complete. Technical Specification For ( MS Fabricated Portable Security Cabin / Container ) : - Bottom Formed : - 100 x 50 MS Square tubes. Top Frame :- Top frame made of 50 x 50 mm , 50x25 mm , 25x25 mm specially formed MS Squre tubes. Stiffeners Bottom : - 100 x 50 mm , 50 x 50 mm MS Square Pipes. Stiffeners Top : - 50 x 50 mm , 50 x 25 & 25 x 25 mm MS Square tubes . Side Wall Stiffeners : - Specially formed 50 x 50 , 50 x 25 mm 1.20 mm MS Square tubes.Panelling Outside :- 1.20 mm specially corrugated MS sheet of 18 G welded on MS Structure Frame. Slanted Roof Outside : - 1.20 mm thick slanted roof with specially formed rain gutters or water channel of MS sheet of 18 G welded on MS structure frame . Internal Wall Panelling : - Pre-laminated MDF Board of 8 mm & all vertical & Horizontal corners will be neatly & smoothly finished with aluminium sections for internal walls & ceiling. Insulation : - Thermal insulation of glass wool of density 48 Kg/ cum 50 mm inside roof & 25 mm glass wool for side walls. Bottom Flooring : - 18 mm bison board panels & 1.2 mm thick PVC Vinyl Carpet shall be fixed by means of self tapping screw shall be fixed on the floor. Aluminium Window : - Aluminium Powder coated sliding window in each container with 4 mm thick glass for all windows with safty grills & canopy above the windows. MS Door : - Door shall be external opening type made up of same material as wall with std. hardware lock & handle & canopy above the windows. MS Door : - Door shall be external open & made of same material as wall & Canopy above the door , door frame made of 25 x 25 mm squre tubes door with std hardware locks , handles. Wiring : - Wiring shall be done using PVC conduit & fire resisrance wires of ISI quality suitable for 240 V single phase AC supply , 1.50 sqmm , 2.5 sqmm thick copper cable for light & fan fittings , 5 amps switch & socket , 4 mm thick cable for main electric supply with MCB. . Electric Fittings : - LED tube light , Door light , Cabin Fan , AC point , power points , switches & socket s ( ISI Mark ) Outside Painting : - outside painting with a coat of primer & Two coat of corrosion free paint. Hooks : - Specially formed 10' x 4 ' 16 mm thick MS hooks for easy lifting & shifting.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing PTMT Ball cock of approved quality,colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long, weighing not less than 440 gms

Providing and fixing G.I. 50 mm dia Flange joint with a pair of flange including Nut bolt and rubber packing etc complete as per instruction of engineer incharge.

Making connection of G.I. distribution branch with G.I main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete: 25 to 40 mm nominal bore

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Without by pass arrangement-PN-1.6 50 mm

Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI&GOM in all respect etc.complete. Reflux valves as per I.S.5312 Part (1984). With out by pass arrangement -PN-1.6 50 mm

Providing and supplying Air Valves as per IS 14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading,transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete. Air Valve Double Ball Flanged Type - PN - 1.6 50 mm.

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.(Rate for all class of valves.) 50 mm

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete.(for all class of valves).Air Valve Double Ball PN - 1.6 50 mm.

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information