Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹48.0 LAccepted-AOC | L 1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L 2₹59.1 L+₹10.4 L (21.3%)Rejected-AOC | L 2 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 3 | L 3₹96.2 L+₹47.5 L (97.6%)Rejected-AOC NEAR PUNJAB NATIONAL BANK KANDOLI NAGROTA JAMMU J K 181221 | JAMMU | JAMMU | JAMMU AND KASHMIR | 181221 | L 3 | Rejected-AOC OTHER THAN LOWEST BIDDER |
Tender Value
₹49.4 L
EMD Value
₹98,800
Closing Date
9 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAGROTA
GE NAGROTA
PROVN OF ALUMINIUM WINDOWS IN LIEU OF OLD EXISTING WINDOWS IN MD ACCN AND CERTAIN MINOR WORKS AT NAGROTA
2023_MES_615183_2
GEN-8551/E8
Open Tender
Civil Works
Item Wise
180 days
NAGROTA
Class D category a i
8 documents required · 8 mandatory
₹500
GE NAGROTA
₹98,800
Yes
6 Feb 2024
19 Oct 2023
16 Nov 2023
19 Oct 2023
9 Nov 2023
27 Oct 2023
Amount
SCHEDULE ‘A’ PART-I Taking down chowkat or frames with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete with hold fasts etc. complete all as specified and directed
Taking down chowkat or frames with shutter (without taking off shutter from the frame) area n exc 1.5 Sqm each complete with hold fasts etc. complete all as specified and directed.
Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water,any height ( upto 2nd floor) including necessary scafolding etc complete all as specified and directed
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as sepcified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), and rubbish off the premises complete all as specified and directed.
Demolition of cement concrete including floor tiles or stone in any description and any position etc removal from site up to 500 m complete all as specified and directed
M&L for brickwork with sub class 'B' modular bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed
M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement any height ( upto 2nd floor) including necessary scafolding complete all as specified and as directed.(Note:- Liquid water proofing compound to be measured paid separately)
Supply only Liquid water proofing compound complete all as spesified and directed.
M&L preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 2-3 mm thick white putty on prepared surface to make the surface even & smooth and applying two coats of exterior weather coat paint white or tinted over a coat of white water base primer to any height ( upto 2nd floor) including necessary scafolding complete all as specified and directed
M&L preparation of new surface of wall and applying 2-3 mm thick white wall care putty to make the surface even & smooth and applying two coats of plastic emulsion paint over a coat of oil based primer complete all as specified and directed
S&F powder coated aluminium frame work (min thickness of powder coating 50 micron) for doors, windows, ventiltors and partition, (sliding/openable/fix doors, windows, ventilator), etc with one, two or more rebates (reqd as per site), section weighing not less than 0.55 kg/m, including joining cleat for fixing with dash fasteners of required dia and size, incl filling up gaps at junctions, ie top, bottoms and sides etc complete all as sspecified and directed..
S&F powder coated aluminium window and ventilator shutters, sliding/openable/fixed (as per required at site) type without sash bar, alu section weighing 0.55 kg/m, including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all specifiedand directed.
S&F aluminium power coated door shutters (sliding/openable/fixed (as per required at site) , aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all specified.
S&F double action floor spring hudraulically regulated made up of min 1.25mm thick alluminium alloy sheet foundation box, main body with stailess steel cover governing pivot made of brass other made of mild steel heavy duty, complete all as specified and directed.
S&F for sheet glass plain/coloured (as per directed by Engr-in-charge) 3mm / 5 mm thick best quality and glazing with rubber packing, screws or glass putty in squares exc 0.5 Sqm each pane complete all specified.
S & F for stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.40mm & fixed with tacks or screws, wire staples, etc complete all as specified and directed.
S&F PVC hallow profile 9/12mm thickness design and pattern as approved/directed at site complete all as specified and as directed.
S&F aluminium anodised grill 6mm thick fixed to aluminium window with and including 'H' type aluminium frames of size 34mm x 11mm complete all as specified and as directed.
S & F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters,walk ways, railings, framework of water tanks and similar works conforming to Fe-290 Gde E 165 etc complete all as specified and directed..
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
M&L plain cement concrete 1:4:8, type D2( using 40mm graded stone aggregate) 75mm thick as in sub base of floor complete all as specified and directed .
M & L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified and directed.
M & L for vitrified light shade floor tiles 10mm thick (square/ rectangular) area of each tile not exc 0.36 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L in repair for glazed ceramic coloured tiles of size 300x450x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over & including 10 mm thick backing coat on fair faces of brick work in CM 1:4 complete all as specified and as directed.
M & L in repair Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1:6 etc complete all as specified and directed.
M & L in repair 18-20mm thick Granite / green marble (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15mm thick screed bed in cement mortar 1:4. complete all as specified and directed.
S & F for PVC sheet of 18mm thick for kitchen cabinet, cupboard shelf / partition/ frame / shutter of 18mm thick side of panel externally impact perfact finish to the shutter and joined together with solvent cement adhesive 8mm thick (4mmx2)x12mm wide PVC sheet is used as gap insert for top & bottom rail, 18mm x 1mm PVC edge lipping is done on top & bottom side using PVC solvent cement adhesive etc complete as per direction of Engr-in-charge, manufacture's specification and drawing.complete all as specified and directed.
M&L Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil bound distemper on walls over 2mm thick plaster of paris to make the surface even & smooth complete all as specified and directed
M&L Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 2mm thick plaster of paris putty complete all as specified and directed
M&L 100mm thick plain cement concrete 1:4:8, type B2( using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed .
M&L for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick sand cushion complete, shape and colour approved by GE etc complete all as specified and directed.
M&L for Providing, cement concrete in kerbs or mud stops, rounded or chamfered on edges , copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, incl formwork complete all as specified and directed.
M & L for applying two coats of synthetic enamel paint on new or previously untreated surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and directed.
M&L Steel Tubes, 'Medium grade', 50 mm bore galvanised, with all fittings( i.e bends , elbows , tees , short pieces , connectors , backnuts , diminishing pieces , caps , plugs , unions , flange etc) incl welding laid in trenches complete all as specified and directed.
All as per item No 37 above but 40 mm bore
All as per item No 37 above but 25 mm bore
All as per item No 37 above but 20 mm bore
Excavating in trenches,in any type of soil, n exe 1.5 m wide and not exceeding 1.5 m in depth and getting out complete all as specified and directed. Note :-Due care will be given while deciding pipeline route for excavation,however any damages to singnal/BSNL/MES HT/LT cables/existing pipes (water/sewage) etc.while excavation will be made good by the contractor and cost of the same for jointing material & labour is deemed to be included in the cost of excavation.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed
Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed
Material and labour for cutting of road ( road width 3-4 meter & depth 1.5 meter ) for passing pipe lines through roads including making good the disturbed surface with PCC 1:2:4 type B-2 using 40 mm graded aggregates complete all as specified and directed
Material and labour for cutting of existing CI/GI/DI pipe and in position for inserting new Tee/Reducers/Branches of size 100 mm bore complete all as specified and directed Note:- Any cutting to the existing pipeline former connection will be made functional on the same day by the contractor with out fail .
S& F 20 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
S& F cast iron heavy duty sluice valve of size 50 mm dia non rising type double flanged PN-1.6 confirming to IS -14846/2000 with brass spindle hand wheel with ISI marked including all necessary Gasket 6 mm thick nuts,bolts washers etc. complete all as specified and directed
Repair to Valve chamber by demolishing the old and providing new valve pit of internal dimensions 600 x 600 x 600 mm with 100 mm thick PCC foundation in PCC 1:4:8 type D-2 , brick masonary in cement mortar 1:4 and 15 mm thick cement plastering in cement mortar 1:4 and removing of damaged valve chamer including MS cover, frame angle of 25x25x4mm & 3 mm thick MS sheet cover and providing 1:2:4 type B1 coping complete all as specified and directed
M/S SAHNI CONSTRUCTION CO
M/s Khajuria Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .