FACELIFT AND IMPROVEMENT OF OLD FOUNTAIN(SOUTHERN SIDE ) AT ANNANAGAR TOWER PARK IN DN- 103,UNIT-23,ZONE-8

Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.- Upto 2.40m Footing Depth. (including Refilling charges)

Supplying and filling in foundation, basement, etc with filling crushed stone dust (Quarry dust) in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means

Supplying, fabricating and placing in position Ribbed Tor Steel / TMT reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) Above plinth / Basement level

Providing and laying in position, Standardised Concrete Mix M-25 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Brick work in following In Cement Morter 1:3 using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 10 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212- 1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.

Plastering the surface of walls with Cement Mortar 1:4 (One cement and Four plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers. (Wall)

Dadooing with plain colour glazed tiles of size 150mm x 150mm x 6mm

Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the departmental officers.

waterproofing with TPO membrane - Providing and laying 1.5 mm thick TPO Membrane over old terrace having week surface/Lime mortar. The membrane is manufactured using hot-melt extrusion process for complete scrim encapsulation. It is reinforced with a strong, polyester reinforced fabric center (scrim) and a tough thermoplastic polyolefin compounded top ply and the bottom. It should have UV resistant top white colour which has a very high resistance to weather agents and UV rays. TPO membrane shall be plasticizer, chlorine & pthalate free, and should exceed/meet specifications of ASTM D6878. Membrane should be mechanically fixed to the substrate by independent plates and fasteners. TPO Roof Membrane should be lapped and seamed using hot air heat welding equipment after mechanically fastening the overlaps. Membrane should have following minimum properties, Breaking Strength min. 220lbf (976N) as per ASTM D751, Elongation break of reinforcement > 15% as per ASTM D751, and Tear Strength 55lbf (245N) as per ASTM D751. The finished cost including surface preparation, application of TPO membrane over the 200GSM Geo- textile and termination of TPO membrane using 2mm thick aluminium strip sealing with PU sealant at the top of strip completely as per specification.

Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting above 3.60m upto 4.90m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m (expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2.40 x 3.0m (expandable upto 4.90m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c and with Cross bracings provided at two levels at a spacing of 1.80m etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).BEAM

I.SI.MARKED 31/2X35 SQ.MM CABLE

HDPE pipe of size 90 mmOD x 76mm ID

Road cutting by mechanized tool including carting & drawal of cable & HDPE / DWC pipe

Supplying and fixing of 6 feet diamter circular spray ring made up of 50 mm dia, 2mm thich, 14 gauge stainless steel 304 grade piipes with necessary inlets % 45 no.s coupling welded for nozzles fixing including necessary support legs to fix the ring on the floor etc. omplete.

Supplying and fixing 3HP Open well submersible mono block water-cooled pump. (Three phase - 2880 Rpm - 440 volts - 50Hz Suguna or CRI make or Texmo or equivalent make) made up of high grade cast iron materials etc. complete.

Supplying and fixing of Angle adjustable smooth stream ring nozzles made up of brass with nickel plating etc. complete. Sketch enclosed

Supplying and fixing of water level independent Vertical jets of 0.5 inches BSP connection vertical jet at size of 100 mm height with 23mm orifice with ball joints made up of brass with nickel plating etc. complete

Supplying and fixing of Ball joint made up of stainless steel 304 grade etc. complete

Supplying and fixing of Multicolour 18 Watts - 12 Volts RGB L.E.D lights made up of die cast stainless steel 304 grade suitable to be fitted with emitter type power LED's with all in one optical lens of 85% efficiency step tempered glass 8mm with protection class of Ip-68/C connection & water proof jointing sealed with heat resistant with mounting cradle etc. complete

Supplying and fixing of Supreme or equivalent make ASTM D1785 SCH 40 UPVC pipes, ASTM D2467 SCH 80 UPVC fittings & control valves for connect pump to 6 feet dia ring etc. complete

Supplying and fixing of 3' x 2.5' size of wire mesh of size 1 cm x 1 cm 2mm thich 14 gauge unit made up of stainless steel with SS frame for protect the pump from the dust and garbage articles etc. complete

Supplying and fixing of necessary electrical items like Control Panel made up of 16 SWG powder coated mild steel including BCH / L&T or equivalent make panel board for 3 H.P pump consisting of isolated switch, phase lights, start and stop push buttons, contractor, relay, volt meter, ammeter in a powder coated mild steel enclosures, 40 Amps 4 pole Legrand / L&T or equivalent make isolator, 20 amps single pole Legrand / L&T or equivalent make miniature circuit breaker, necessary 1.0 Sq.mm 4 core Havels / Polygon / Finolex or equivalent make electric cables, automatic color changing ON - OFF timer control 1 no. for lights with powder coated mild steel control panel 1 no. etc. complete

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Double Pole RCD / RCCB (Lower End) with suitable necessary connection

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed PVC plug point

I.SI.MARKED 3 1/2X25 SQ.MM CABLE

Labour for laying of cable through HDPE pipe ( 50 mm OD ) in plain cement concrete road including braking of cement concrete road & filling of plain cement concrete mix of 1:1.5:3 ( with 12 mm jelly ) including carting of cable & HDPE pipe (trench size 100mm breadth x 150mm depth )

Cost of KIOSK pillar box

Cost of Erection of KIOSK pillar box

Providing a full view bronze metal statue, with a height of 6 Feet and a weight ranging from 300 kg to 400 kg. The placement of the statue will be in an appropriate position as approved by departmental engineers. The scope of work includes scale measurement drawing, sculpting armature fabrication, clay modelling, Plaster of Paris (POP) Mould creation, model transfer to wax, sand Mold (wax-core) production, dewaxing, bronze casting of the model, grinding, welding, chiselling, finishing with a PU gold coating, transportation, and erection on a pedestal at the designated site, as directed by departmental officers etc., Complete compliance with standard specifications.

Please Enable Macros to View BoQ information