Renovation and extensive Repair Works of SIDBI staff Quarters, C Scheme, Ashok Marg Jaipur

S.NO DESCRIPTION DSR AMOUNT NS AMOUNT

1 CIVIL & ALLIED WORKS 28982910.00 19375857.20

2 PLUMBING FIXTURES WORKS 14931720.00

3 ELECTRICAL & ALLIED WORKS 5704477.00 110000.00

4 ELECTRCAL FIXTURE WORKS 4644952.00

5 STREET LIGHT WORKS 765606.00

6 FIRE DETECTION & ALARM SYSTEM 190460.00

7 FIRE FIGHTING WORKS 2052691.00 673189.00

8 CCTV WORKS 296542.00

9 LIGHTING ARESTOR WORKS 285100.00

10 DG SET WORKS 897234.00

11 OFF GRID SOLAR WORKS 2191866.00

13 MULTIPLYING FACTOR FOR 18 % GST 1.0633

14 Total Rs including 18 % GST 39268241.06 44172066.20

16 GRAND TOTAL Rs with GST 83440307.00

16 GRAND TOTAL Rs with GST 83440307.00

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Half brick masonry with common burnt clay F.P.S.

(non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V

1.1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 41.82 Sqm 1018.05 42575.00

Stone work, plain in copings, cornices, string

courses and plinth courses, upto 75 mm thick in

Cement mortar 1:6 (1 cement : 6 coarse sand)

2 7.32 including pointing with white cement mortar 1:2

(1 white cement : 2 stone dust) with an

admixture of pigment matching the stone shade.

Marble work gang saw cut (polished and machine

cut) of thickness 18 mm for wall lining (veneer

work), backing filled with a grout of average 12

mm thick in cement mortar 1:3 (1 cement : 3

coarse sand), including pointing with white

3 8.1 cement mortar 1:2 (1 white cement : 2 marble

dust) with an admixture of pigment to match the

marble shade (To be secured to the backing by

means of cramps, which shall be paid for

Raj Nagar Plain white marble/ Udaipur green

marble/ Zebra black marble.

Providing and fixing 18 mm thick gang saw cut,

mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations

of required size,approved shade, colour and

texture laid over 20 mm thick base cement

4 8.2 mortar 1:4 (1 cement : 4 coarse sand), joints

treated with white cement, mixed with matching

pigment, epoxy touch ups, including rubbing,

curing, moulding and polishing to edges to give

high gloss finish etc. complete at all levels.

4.1 8.2.2 Granite stone slab colour black, Cherry/Ruby red

Providing edge moulding to 18 mm thick marble

stone counters, Vanities etc., including machine

5 8.3 polishing to edge to give high gloss finish etc.

complete as per design approved by Engineer-in-

Extra for providing opening of required size &

shape for wash basin/kitchen sink in kitchen

platform, vanity counter and similar location in

6 8.5 marble/ Granite/ stone work, including necessary 25.00 No. 808.15 20204.00

holes for pillar taps etc. including moulding,

rubbing and polishing of cut edges etc. complete

Providing and fixing wire gauge shutters using

galvanized M.S. wire gauge of average width of

aperture 1.4 mm in both directions with wire of

dia 0.63 mm, for doors, windows and clerestory

windows with hinges and necessary screws :

7.1 9.27.2 30 mm thick shutters

with ISI marked M.S. pressed butt hinges bright

finished of required size - Second class teak wood

Providing and fixing magnetic catcher of approved

quality in cupboard / ward robe shutters,

including fixing with necessary screws etc.

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

8.1 9.114.1 Triple strip vertical type 300.00 No. 44.85 13455.00

Providing and fixing factory made Fiberglass

Reinforced plastics (F.R.P.) chajja 4 mm thick of

required colour, size and design made by Resin

Transfer Moulding (RTM) Machine Technology,

resulting in void free

compact laminate in single piece, having smooth

gradual slope curvature for easy drainage of

water and duly reinforced by 2 nos vertically and

1 nos horizontally 50x2 mm thick M.S. flat with 12

mm in built hole for

grouting on the existing wall along with the 50

mm flanges duly inserted and sealed in the wall

complete in one single piece casted

monolithically,including all necessary fittings . The

FRP Chajja should be manufactured

using unsaturated Polyester resin as per IS: 6746,

duly reinforced with fibre glass chopped strand

mat (CSM) as per IS: 11551 complete with

protective Gel coat U/V coating on Top for

complete resistance from the

extreme of temperature, weather & sunlight

(Only plan area of chajjas shall be measured for

making payment).

Providing and fixing cup board shutters 25mm

thick, with Pre-laminated flat pressed three layer

particle board or graded wood particle board IS:

12823 marked exterior grade (Grade l Type ll)

having one side decorative lamination and other

side balancing lamination including IInd class teak

wood lipping of 25mm wide x12 mm thick with

necessary screws and bright finished stainless

steel piano hinges complete as per direction of

the Engineer-in-Charge

Steel work welded in built up sections/ framed

work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel

primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings,

brackets, gates and similar works.

Providing and fixing stainless steel ( Grade 304)

railing made of Hollow tubes, channels, plates

etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and

fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with

necessary accessories & stainless steel dash

fasteners , stainless steel bolts etc., of required

size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only

weight of stainless steel members shall be

considered excluding fixing accessories such as

nuts, bolts, fasteners etc.).

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Providing and laying Ceramic glazed floor tiles of

size 300x300 mm(thickness to be specified by the

manufacturer) of 1st quality conforming to IS :

15622 of approved make in colours such as

White, Ivory, Grey, Fume Red Brown, laid on 20

mm thick cement mortar 1:4 (1 Cement :4 Coarse

sand), jointing with grey cement slurry @

3.3kg/sqm including pointing the joints with

white cement and matching pigment etc.,.,

Providing and fixing 1st quality ceramic glazed

floor tiles conforming to IS : 15622 (thickness to

be specified by the manufacturer ) of approved

make in all colours, shades except burgundy,

bottle green, black of any size as approved by

13 11.37A Engineer-in-Charge in skirting, risers of steps and 1400.00 Sqm 938.50 1313900.00

dados over 12 mm thick bed of cement Mortar

1:3 (1cement: 3 coarse sand) and jointing with

grey cement slurry @ 3.3kgper sqm including

pointing in white cement mixed with pigment of

matching shade complete.

Providing and laying Vitrified tiles in floor in

different sizes (thickness to be specified by the

manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade,

laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints

with white cement and matching pigments etc.

The tiles must be cut with the zero chipping

diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber

mallet for placing the tiles gently and easily.

14.1 11.41A.1 Double charge vitrified tile polished finish of size

Deduct for not using 20 mm thick cement mortar

1:4 (1 cement : 4coarse sand) bedding in laying of

floor tiles and jointing with grey cement slurry @

Fixing glazed/ Ceramic/ Vitrified floor tiles with

cement based high polymer modified quick-set

tile adhesive (Water based) conforming to IS:

15477, in average 3mm thickness.

11.48 Grouting the joints of flooring tiles having joints

of 3 mm width, using epoxy grout mix of 0.70 kg

of organic coated filler of desired shade(0.10 kg of

17 hardener and 0.20 kg of resin per kg), including

filling/grouting and finishing complete as per

direction of Engineer-in-charge.

Providing and fixing on wall face unplasticised

Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for

thermal expansion,

18.1 (i)Single socketed pipes.

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Providing and fixing on wall face unplasticised -

PVC moulded fittings/ accessories for

unplasticised Rigid PVC rain water pipes

19 12.42 conforming to IS : 13592 Type A including jointing

with seal ring conforming to IS :5382 leaving 10

mm gap for thermal expansion.

19.1 12.42.2 Single pushfit Coupler :

19.2 12.42.3 Single tee with door

19.4 12.42.6 Shoe (Plain)

Providing and fixing unplasticised -PVC pipe clips

of approved design to unplasticised - PVC rain

water pipes by means of 50x50x50 mm hardwood

plugs, screwed with M.S. screws of required

length including cutting brick work and fixing in

cement mortar 1:4 (1 cement : 4 coarse sand) and

making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain

water pipe cast iron grating 15 cm diameter and

weighing not less than 440 grams.

Wall painting with acrylic emulsion paint of

22 13.60 approved brand and manufacture to give an even

22.1 13.60.1 Two or more coats on new work. 9700 Sqm 137.85 1337145.00

Removing dry or oil bound distemper, water

proofing cement paint and the like by scrapping,

26 13.91 sand papering and preparing the surface smooth 14000.00 Sqm 20.85 291900.00

including necessary repairs to scratches etc.

Painting (one or more coats) on rain water, soil,

waste and vent pipes and fittings with synthetic

27 13.96 enamel paint of approved brand and manufacture

and required colour on old work :

Painting with synthetic enamel paint of approved

28 13.99 brand and manufacture of required colour to give

an even shade :

28.1 13.99.1 One or more coats on old work. 350 Sqm 86.55 30293

Finishing walls with Premium Acrylic Smooth

29 13.112 exterior paint with Silicone additives of required

29.1 13.112.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm)

Sqmcement paint

108.6surface. 466980

Polishing in high gloss/matt finish melamine clear

polish on wood work in required color/wooden

shade texture with following process in the

sequence as detailed below:

1. The surface to be polished is rubbed with sand

paper 80/120 no. and then with sand paper of

2. Applying two coats of sealer with spray gun and

allowing sufficient drying time for 1st coat and

2nd coat is allowed to dry for 8 to 12 hrs.

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

3. On drying of sealer coat, wet rubbing with

emery cloth of finer grading with water to remove

excess sealer layer and make the surface further

smooth after this wet rubbing, then surface is

applied with special grade melamine fillers to fill

all the small and big holes/grooves etc. Filler coat

to be allowed to dry for 4 to 6 hrs on which again

a light wet rubbing is done this surface is further

allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied

with spray gun using melamine clear polish and

melamine thinner in required proportion. This 1st

coat is allowed to dry for 24 hrs then this dry

surface is again fine wet rubbed smooth, which is

further allowed to dry for 12 hrs. The final

melamine polish is applied with compressor 30.00 Sqm 1156.55 34697.00

pressure spray gun using melamine clear polish

and melamine thinner mixed in required

proportion complete as per direction of Engineer-

in-Charge. (Finalo coat to be done in 1 or 2 layers

without gap of time.)

Providing and fixing double scaffolding system

(cup lock type) on the exterior side of

building/structure, upto 25 metre height, above

ground level, including additional rows of

scaffolding in stepped manner as per

requirement of site, made with 40mm dia M.S.

tube, placed 1.5 metre centre to centre,

31 24.2 horizontal & vertical tubes joint with cup & lock

system with M.S. Tubes, M.S. tube challis, M.S.

clamps and staircase system in the scaffolding for

working platform etc. and maintaining it in a

serviceable condition for execution of work of

cleaning and/ or pointing and/ or applying

chemical and removing it thereafter.

The scaffolding system shall be stiffened with

bracings, runners, connecting with the building

etc, wherever required, if feasible, for inspection

of work at required locations with essential safety

features for the workmen etc., complete as per

directions and approval of Engineer-in-charge.

Note :- (1) The elevational area of the scaffolding

shall be measured for payment purpose.

(2) The payment will be made once only for

execution of all items for such works.

Repair to plaster of thickness 12mm to 20 mm in

patches of area 2.5 sqm and under, including

cutting the patch in proper shape, raking out

joints and preparing plastering the wall surface

with white cement based polymer modified self

curing mortar, including disposal of rubbish, all

complete as per the direction of Engineer-In-

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Cleaning of chocked sewer line by diesel running

vehicle mounting hydraulic operated high

pressure suction cum jetting sewer cleaning

machine fitted with pump having 4000 litres

suction capacity and 6000 litres water jetting tank

capacity including skilled operator, supervising

engineer etc. for cleaning and partial de-silting of

manholes and de-chocking of sewer lines. De-

chocking and flushing of sewer line from one

manhole to another by high pressure jetting

system of 2200 PSI for sewer line from 150mm

dia upto 300mm dia for all depth.

Cleaning of under ground sump, Over Head R.C.C.

Tank (independent staging) including disposal of

33 14.78 slit and rubbish, all as per direction of Engineer-in-

Charge. The cleaning shall consist following

(i) Tank shall be emptied of water by pumping &

bottom shall be cleaned of slit and other

(ii) Entire surface area of the sump shall then

scrubbed thoroughly with wire brush etc. and

pressure washed with water.

(iii) Chlorination of RCC internal surface by liquid

(iv) The treated surface shall be dried using air

jetting and all loose particles shall be removal

from the surface.

(v) Finally the surface shall be treated with

ultraviolet radiation etc. as per direction of 100.00 Sqm 71.30 7130.00

Engineer-in-Charge.

Cutting holes of required size in brick masonry

wall for fixing of exhaust fan including providing

and fixing 300 mm dia PVC pipe conforming BIS-

12818 and making good the same etc. complete

as per direction of Engineer-in-charge.

Dismantling W.C. Pan of all sizes including

disposal of dismantled materials i/c malba all

complete as per directions of Engineer-in- Charge.

Hacking of CC flooring including cleaning for

36 14.83 surface etc. complete as per direction of the 5000.00 Sqm 2.85 14250.00

Engineer-in-Charge.

Dismantling 15 to 40 mm dia G.I. pipe including

stacking of dismantled pipes (within 50 metres

lead) as per direction of Engineerin-Charge.

(a) Internal Work- Exposed on wall 780.00 m 2.85 2223.00

Taking out existing wooden door shutter, repair

by cutting, painting etc. and refixing of repaired

door shutters to existing door frames, including

replacement of hinges with screws, etc. as

required, all complete as per the direction of the

Engineer-in-charge.

Demolishing cement concrete manually/ by

mechanical means including disposal of material

within 50 metres lead as per direction of Engineer

Nominal concrete 1:3:6 or richer mix (i/c

equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical

means including stacking of steel bars and

40 15.3 disposal of unserviceable material within 50 20.00 Cum 2928.10 58562.00

metres lead as per direction of Engineer - in-

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Extra for cutting reinforcement bars manually/ by

mechanical means in R.C.C. or R.B. work (Payment

41 15.5 shall be made on the cross sectional area of R.C.C. 20.00 Sqm 947.10 18942.00

or R.B. work) as per direction of Engineer in-

Demolishing brick work manually/ by mechanical

means including stacking of serviceable material

42 15.7 and disposal of unserviceable material within 50

metres lead as per direction of Engineer-in-

Dismantling doors, windows and clerestory

windows (steel or wood) shutter including

43 15.12 chowkhats, architrave, holdfasts etc. complete

and stacking within 50 metres lead :

43.1 15.12.2 Of area beyond 3 sq. metres 328.00 No. 414.55 135972.00

Dismantling steel work in single sections including

44 15.17 dismembering and stacking within 50 metres lead

44.2 15.17.2 Channels, angles, tees and flats 2000.00 Kg 1.90 3800.00

Dismantling tile work in floors and roofs laid in

45 15.23 cement mortar including stacking material within

50 metres lead.

45.1 15.23.1 For thickness of tiles 10 mm to 25 mm 1640.00 Sqm 60.50 99220.00

For thickness of tiles above 25 mm and up to 40

Dismantling G.I. pipes (external work) including

excavation and refilling trenches after taking out

the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead

as per direction of Engineer-in-charge :

Dismantling C.I. pipes including excavation and

refilling trenches after taking out the pipes,

manually/ by mechanical means breaking lead

47 15.45 caulked joints, melting of lead and making into

blocks including stacking of pipes & lead at site

within 50 metre lead as per direction of Engineer-

Dismantling of flushing cistern of all types

(C.I./PVC/Vitreous China) including stacking of

48 15.52 useful materials near the site and disposal of 146.00 No. 744.60 108712.00

unserviceable materials within 50 metres lead.

Disposal of building rubbish / malba / similar

unserviceable, dismantled or waste materials by

mechanical means, including loading,

49 15.60 transporting, unloading to approved municipal 586.00 Cum 219.35 128539.00

dumping ground or as approved by Engineer-in-

charge, beyond 50 m initial lead, for all leads

including all lifts involved.

Painting road surface marking with adequate nos

of coats to give uniform finish with ready mixed

road marking paint conforming to IS : 164, on

50 16.48 bituminous surface in white/yellow shade,

including cleaning the surface of all dirt, scales,

oil, grease and foreign material etc. complete.

50.1 16.48.2 Old work (One or more coats) 1690.00 Sqm 157.60 266344.00

Providing and fixing Stainless Steel A ISI 304

(18/8) kitchen sink as per IS:13983 with C.I.

brackets and stainless steel plug 40 mm, including

painting of fittings and brackets, cutting and

making good the walls wherever required :

51.1 17.10.1 Kitchen sink with drain board

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Providing and fixing 8 mm dia C.P. / S.S. Jet with

flexible tube upto 1 metre long with S.S.

52 17.16A triangular plate to Eureopean type W.C. of quality 60.00 No. 299.35 17961.00

and make as approved by Engineer - in - charge.

Providing and fixing CP Brass 32mm size Bottle

53 17.22A Trap of approved quality & make and as per the 85.00 No. 886.25 75331.00

direction of Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or

54 17.28 wash basin including P.V.C. waste fittings

54.1 17.28.1 Semi rigid pipe

Providing and fixing PTMT Waste Coupling for

55 17.69 wash basin and sink, of approved quality and

Waste coupling 31 mm dia of 79 mm length and

55.1 17.69.1 62 mm breadth weighing not less than 45 gms. 85.00 No. 103.00 8755.00

Waste coupling 38 mm dia of 83 mm length and

55.2 17.69.2 77 mm breadth, weighing not less than 60 gms. 25.00 No. 109.70 2743.00

Providing and fixing Chlorinated Polyvinyl Chloride

(CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes

& fittings with one step CPVC solvent cement and

53 18.8 the cost of cutting chases and making good the

same including testing of joints complete as per

direction of Engineer in Charge. :Concealed work,

including cutting chases and making good the

53.1 18.8.1 15 mm nominal outer dia .Pipes. 400.00 m 441.15 176460.00

53.2 18.8.2 20 mm nominal outer dia .Pipes. 400.00 m 513.75 205500.00

53.3 18.8.3 25 mm nominal outer dia .Pipes. 200.00 m 626.05 125210.00

53.4 18.8.4 32 mm nominal outer dia .Pipes. 200.00 m 712.75 142550.00

Providing and fixing uplasticised PVC connection

pipe with brass unions :

54.1 18.21.2 45 cm length

Providing and making cast in-situ100mm

wide POP Cornice of approved design

at the junction of ceiling & walls

55 NS including POP putty and screws etc all 3000.00 rmt 295.00 885000.00

complete as directed by engineer in

charge as required at site.

Providing and making cast in situ pop

false ceiling with required g.i frame work

56 NS ,g.i mesh and finishing of same with 500.00 Sqm 2950.00 1475000.00

pop in layers to achieve proper level

/finishing as per site requirement all

Providing and applying pop punning on

57 NS wall 5 mm thick in proper line and level 3000.00 Sqm 295.00 885000.00

with required material ,t&p , labour etc. all

Supplying and fixing SS Curtain rod on

door and windows with required SS

58 NS bracket. Rate also include s/f end 1000.00 RMT 826.00 826000.00

funnels /cap of approve design as per

site requirement

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

supply & fixing of 18 mm HDMR ply of size

1500 mm X 1200 mm having set top box

holder size 1200 mm X 200 mm placed

100 mm from TV unit. All side with 2mm

59 NS laminate of approved colour & provision of 100.00 Sqm 2600.00 260000.00

6/16 Amp socket at top , Tv cable with

switch plate. Two number of 6/16 Amp

socket with one control switch above set

top box point as per site condition

Providing and laying water proofing treatment in

sunken portion of WCs, bathroom etc., by

60 22.5 applying cement slurry mixed with water proofing

cement compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm

mixed with water proofing cement compound @

0.253 kg/ sqm. This layer will be allowed to air

cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242

kg/sqm mixed with water proofing cement

compound @ 0.126 kg/sqm. This layer will be

allowed to air cure for 4 hours followed with

water curing for 48 hours.

(The rate includes preparation of surface,

treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer

Providing and laying 60mm thick factory made

cement concrete paver block of approved shape

and colour of M -30 grade made of C&D waste by

block making machine with vibratory compaction

61 26.72 laid in required pattern and including over 50mm 1600.00 Sqm 757.00 1211200.00

thick compacted bed of coarse sand, filling the

joints with fine sand etc. all complete as per the

direction of Engineer-in-charge.

Providing and laying water proofing treatment on

roofs of slabs by applying cement slurry mixed

with water proofing cement compound consisting

(a) after surface preparation, first layer of slurry

of cement @ 0.488 kg/sqm mixed with water

proofing cement compound @ 0.253 kg/sqm.

(b) laying second layer of Fibre glass cloth when

the first layer is still green. Overlaps of joints of

fibre cloth should not be less than 10 cm.

(c) third layer of 1.5 mm thickness consisting of

slurry of cement @ 1.289 kg/sqm mixed with

water proofing cement compound @ 0.670

kg/sqm and coarse sand @ 1.289 kg/sqm. This

will be allowed to air cure for 4 hours followed by

water curing for 48 hours. The entire treatment

will be taken upto 30 cm on parapet wall and

tucked into groove in parapet all around.

(d) fourth and final layer of brick tiling with

cement mortar (which will be paid for separately.

(For the purpose of measurement the entire

treated surface will be measured.)

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Providing and fixing concertina coil fencing with

punched tape concertina coil 600 mm dia 10

metre openable length ( total length 90 m),

having 50 nos rounds per 6 metre length, upto 3

m height of wall with existing angle iron 'Y'

shaped placed 2.4m or 3.00 m apart and with 9

horizontal R.B.T. reinforced barbed wire, stud tied

with G.I. staples and G.I. clips to retain horizontal,

63 16.53 including necessary bolts or G.I. barbed wire tied 170.00 m 303.65 51621.00

to angle iron, all complete as per direction of

Engineer-in-charge, with reinforced barbed

tape(R.B.T.) / Spring core (2.5mm thick) wire of

high tensile strength of 165 kg/ sq.mm with tape

(0.52 mm thick) and weight 43.478 gm/ metre

(cost of M.S. angle, C.C. blocks shall be paid

15 mm cement plaster on the rough side of single

or half brick wall of mix :

18 mm cement plaster in two coats under layer

12 mm thick cement plaster 1:5 (1 cement: 5

65 13.12 coarse sand) and a top layer 6 mm thick cement 5500.00 Sqm 461.85 2540175.00

plaster 1:3 (1 cement: 3 coarse sand) finished

rough with sponge.

Extra for providing and mixing water proofing

material in cement plaster work in proportion

recommended by the manufacturers.

Finishing walls with textured exterior paint of

required shade :

New work (Two or more coats applied @ 3.28

ltr/10 sqm) over and including priming coat of

exterior primer applied @2.20kg/10 sqm.

Dismantling old stone grit plaster or skirting

raking out joints and cleaning the surface for

plaster including disposal of rubbish to the

dumping ground within 50 metres lead.

Making groove of 10-12mm on joint of masonary

70 NS work and concrete work as per site condition & 6000.00 RMT 11.00 66000.00

direction in charge

71 NS MODULAR KITCHEN WORK

Providing and fixing modular kitchen

units for the kitchen platform and top

wall units to be fabricated by using

HDHMR board of thickness 18 mm for

making cabinets of required sizes to

match with the sizes SS kitchen jali units

and size of the SS sink as per following

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Front bottom , top sides and shelf

partitions of the modular cabinets shall

be of 18 mm thick HDHMR boards of

Mls Green panel Industries or

approved equivalent and back portion

shall be of 8 mm thick HDHMR board

or approved equivalent with necessary

fittings , screws , pasting materials,

finishing all exposed cut surfaces with self

adhesive PVC tape in matching shade as

that of laminate . The shutters and the

pull out units shall be fixed 50 mm above

the kitchen floor level . All the inner

portions of the cabinets shall be

finished with 0.8 mm thick laminate of

white colour and approve make..The front

face of the cabinet shall be finished

with1.0 mm ultra gloss laminate shade

21162 MR+ & 21069 MR+ Merino

make The fittings like handles ,

telescopic channels SS baskets ,

auto closing hinges shall be paid

separately under respective items below

. Quoted rates shall be inclusive of labour

, materials wastage scaffolding

fixing arrangements of top and bottom

Below platform units of depth 96.00 29500.00 2832000.00

610 mm approx ,

Top wall units of depth 300 mm approx. 72.00 21240.00 1529280.00

Providing and fixing stainless steel

baskets and other

2 fittings , accesories of modular kitchen of

Mls Hettich or approved equivalent make

as per below mentioned details :-

a SS 304 cutlery baskets 15 x20 x4 inch 24.00 Each 2950.00 70800.00

b, SS 304 Plain basket 15 x20 x6 inch 24.00 Each 3540.00 84960.00

c SS 304 thali basket 15 x20 x8 inch 24.00 Each 5310.00 127440.00

d SS 304 plain baskets 19 x20 x4 inch 72.00 Each 3540.00 254880.00

e SS 304 plain basket 19 x20 x 6 inch 24.00 Each 4130.00 99120.00

f SS 304 plain basket 19x 20 x8 inch 48.00 Each 4720.00 226560.00

g SS baskets S —Corner basket 24.00 Each 9440.00 226560.00

h SS detergent pullout 24.00 Each 2360.00 56640.00

i SS dustbin ring 24.00 Each 1770.00 42480.00

Bottle Pull out basket set of width 9" with 24.00 8850.00

SS Handle 12 inch size Basic price 400 312.00 590.00 184080.00

SS auto close hinges soft close of all 288.00 708.00 203904.00

variety of Hettich or approved make

m telescopic channels 20 " size Hettich 336.00 pair 885.00 297360.00

S/F Chimney 600 mm wide Zenith

n model Faber make with vent pipe Basic 24.00 Each 29500.00 708000.00

S/F granite kitchen sink 36 x18 x8

O with drain board Emarald black model 24.00 Each 21240.00 509760.00

Hindware make Basic price 13500

Supply & fixing of safety Nets for stairwell of

thickness 2.5mm with mesh size 50 mm. Sample

of the same will be approved by Engineer In

Supply & fixing of HDPE Twine Bird Nert/Pigeon

net for balcony Twine size 280D/15 ply , UV

sablized Sample of the same will be approved by

Engineer In charge

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Removing the existing plumbing fixtures carefully

and stacking the reusable fixture at

76 NS safe/designated place, including dicardeding the 1.00 Job 15000.00 15000.00

unusable fixture after approval from Engineer In

Sliding Window ( 3 track 2 Glass Shutter & 1

Supply & fixing of uPVC sliding windows: Frame

made from the extruded uPVC window profile

section of size 112 W X 50 H mm having outer

wall thickness of 2.0 mm(+/-) and 3 box multi

chamber construction, white in finish, duly

reinforced with 1.2 mm thick GI Section. Frame

shall have three track configuration, two for

sliding shutter and one for mosquito mesh

shutter. Verticle memeber of frame which bears

the sliding shutter load shall have aluminium

rail/track for smooth sliding of shutter rollers. All

the four corners shall be mittered cut & thermal

welded so as to form window frame. Frame shall

be milled with drain and air equalizer hole in

order to be water tight and for drainage of

accumulated water ,if any, to outer side.

Shutter: The Shutter of sliding window shall be

made of 42w x 69h mm Extruded 3 box multi

chamber uPVC Window Profile Section of white

colour having outer wall thickness of 2.0mm (+/-

0.2mm) provided with reinforcement of 1.5mm

thick GI section duly metered cut & thermal

welded at all coners and fitted with uPVC glazing

bead of size25 x 20 mm with inner and outer co-

extruded EPDM/TPE-E weather seal gaskets

alongwith 6mm thick ISI make plain float glass.

Mesh shutter shall be made of 39w x 69h mm

Extruded 3 box multi-chamber UPVC Window

Sliding Door ( 3 track 2 Glass Shutter & 1 Mesh

Providing and fixing of uPVC Sliding doors: Frame

Made from the Extruded uPVC door Profile

Section of size 112w x 50h mm having outer wall

thickness of 2.Omm (+/-0.2mm) and 3 box multi-

chamber construction, White in finish, duly

reinforced with 1.2 mm thick GI section. Frame

shall have three track configuration, two for

sliding of door shutter and one for mosauito

mesh shutter. Vertical member of frame which

bears the sliding shutter load shall have

aluminium railtrack for smooth sliding of shutter

rollers. All the four corners shall be mitered cut &

thermal welded so as to form door frame. Frame

shall be milled with drain and air egualizer hole in

order to be water tight and for drainage of

accumulated water, if any, to outer side. Shutter:

The shutter of sliding door shall be made of 42w x

69h mm Extruded 3 box multi- chamber uPVC

door Profile Section of white colour having outer

wall thickness of 2.0mm (+/- 0.2mm) provided

with reinforcement of 1.5mm thick GI section

duly mitered cut & thermal welded at all corners

and fitted with uPVC glazing bead of size 25 x 20

mm with inner and outer c0-extruded EPDM/TPE-

E weather seal gaskets alongwith 6mm thick ISI

make plain float glass. Mesh shutter shall be

made of 39w x 69h mm Extruded 3 box multi-

chamber UPVC door profile section of white

79 NS FIXED WINDOW

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Providing and fixing of UPVC Fixed windows :

Outer Frame made from the Extruded UPVC

Windows profile section of size 60w X 58h mm

having outer wall thickness of 2.0mm (+/- 0.2mm)

and three chamber constuction, White in finish,

duly reinforced with 1.5mm thick GI section. All

the four corners shall be mitered cut & thermal

welded so as to form window frame. Frame shall

be milled with drain and air equalizer hole in

order to be water tight and for

|drainage of accumulated water, if any, to outer

side. Fix Mullion made of 60w X 78h mm UPVC

profile section with steel reinforcement shall be 0.00 Nos. 7640.00 0.00

provided in windows having 2 parts, as per

|the requirement. Frame shall have co-extruded

with EPDM/TPE-E gasket fitted in in-built groove

of frame profile for proper air & sound insulation.

UPVC glazing bead of size 36 X 20mm with inner

land outer co-extruded EPDM/TPE-E weather seal

gasket alongwith 6mm thick ISI make plain float

glass. All welding joints of frame and shutter shall

be cleaned and milled with the CNC mechainism

to provide uniform grooved finish on all visible

jaints. (Prizma, Fenesta

80 NS Ventilator for ventilation

providing and fixing of UPVC casement openable

windows Ventilator). Outer Frame made from the

Extruded UPVC Windows profile section of size

60w X 58h mm having outer wall thickness of

2.Omm (+/- 0.2mm) and three chamber

constuction, White in finish, duly reinforced with

1.5mm thick GI section. All the four corners shall

be mitered cut & thermal welded so as to form

window frame. Frame shall be milled with drain

and air equalizer hole in order to

|be water tight and for drainage of accumulated

water, if any, to outer side. Fix Mullion made of

60w X 78h mm UPVC profile section with steel

reinforcement shall be provided in windows

having 2 or more openable shutters, as per the

requirement. Frame shall have co-extruded with

EPDMTPE-E gasket fitted in in-built groove of

frame profile for proper air & sOund insulation of

the shutter. Shutter: The shutter of outward

openable window shall be made of size 60w X 78h

mmn and shutter of inward openable windowN

shall be made of size 60w x 77h mm Extruded 3

box multi-chamber UPVC Window profile section

of white colour having outer wall thickness of

2.25mm (+/- 0.2mm) provided with

reinforcement of 1.5mm thick GI section duly

mitered cut & thermal welded at all corners and

fitted with UPVC glazing bead of size 36 X 2Omm

81 NS Collapseable mosquito Mesh

Providing and fixing of collapseable mosquito

mesh for balconies. Powder coated Frame

material of aluminium, channel thickness 1 inch,

all four sides of frame is of 18 gauge and pull

section of 16 gauge , polyster mesh as per site

condition and as per direction of Engineer In

charge. Sample to be approved by Engineer In

82 NS Restoring Water Harvesting System

Digitally signed by SANJAY

CIVIL & ALLIED WORKS

S.No. DSR No. Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs) NS DSR Amount(Rs)

Restoring Water harvesting system at site consist

of 4 Nos. Soakpits and restoration of rain water

drain, Rain water SWP pipies and restoring 09

Nos. rain water chambers. Reparing of chamber, 1.00 Job 50000.00 50000.00

SWP pipe, reapring of soakpits, man holes etc. for

making operational in all respect as per site

condition and direction of Engineer In charge

Providing and laying in position cement concrete

of specified grade excluding the cost of centering

and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand(zone-III) derived

from natural sources : 4 graded stone aggregate

20 mm nominal size derived from natural

Centering and shuttering including strutting,

propping etc. and removal of form work for :

Retaining walls, return walls, walls (any thickness)

including attached pilasters, buttresses, plinth

and string courses fillets, kerbs and steps etc..

Reinforced cement concrete work in walls (any

thickness), including attached pilasters,

buttresses, plinth and string courses, fillets,

85 5.2 columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five level,

excluding cost of centering, shuttering, finishing

and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-

III)derived from natural sources : 3 graded stone

aggregate 20 mm nominal sizederived from

natural sources)

5.22 Steel reinforcement for R.C.C. work including

straightening, cutting, bending, placing in position

and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-

Providing and fixing of GI chicken wire mesh 24

gauge & 12 mm mesh and 300 mm width for

construction joints and chansing in brick work for

87 electrical conduits or water supply pipes , brick 500.00 sqm 250.00 125000.00

work & concrete joints including cement slurry

and pegs /nails as required before plastering etc

Digitally signed by SANJAY

PLUMBING FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

Supplying and fixing looking mirror of 5 mm thick looking glass with bevelled

edges and holes as per site requirement of Modi Gaurd or other approved equivalent

Rates are inclusive of fixing of glass with SS stud all complete as directed by

B/1 Engineer Incharge Sqft 1500.00 354.00 531000.00

Providing and fixing in position Towel rod of 24" length with brackets fixed over

tiles with rowel plug and approved quality screws including cutting and making

B/2 good the tiles. Each 120.00 1652.00 198240.00

Providing and fixing in position Towel ring fixed over tiles with rowel plug and

approved quality screws including cutting and making good the damages of

B/3 tiles etc. all complete as required at site as directed by the Engineer-in-Charge. Each 120.00 1475.00 177000.00

Providing and fixing in position Chlorinated Poly Vinyl Chloride (CPVC) pipe SD-

11 of approved make in desired thickness having thermal stability for hot and cold

water supply of including all CPVC plain & brass threaded approved fittings and

fixing the pipe with clamps & screws as per the site requirements

at 1.00 meter C/C etc. all complete.

(b) 40 mm Nominal dia Rmt 300.00 590.00 177000.00

c) 65 mm dia pvc pipe with fitting Rmt 360.00 590.00 212400.00

d)15. mm dia brass ball valve in kitchen shaft No. 60.00 1180.00 70800.00

Supplying and fixing position the following approved make fittings & fixtures,

B/5 including carefully removing the existing old/damaged fittings & fixtures and

handing over the same

15mm dia. C.P. Brass Pillar Cock with CP

(i) flange of continental series of Hinddware or other approved equivalent make. Each 60.00 1239.00 74340.00

15 mm dia. C.P. Brass bib cock with nozzle wall CP. flange of approved equivalent

(iii) 15 mm dia. C.P angle valve with wall CP. flange of continental series Each 900.00 1416.00 1274400.00

15 mm dia. C.P. Brass central hole single lever wash basin mixer including

(iv) plumbing fittings and 450 mm long braided hoses etc. all complete as Each 120.00 4720.00 566400.00

required at site.

15 mm dia. C.P. 4 way high flow single lever divertor with cover plate ,c.p pin .

Including all plumbing fittings& fixtures etc all complete as required at site as

(v) directed by engineer-in charge Each 120.00 7670.00 920400.00

15 mm dia C.P spout of approve design with C.P Handshower and c.p flexible

(vi) tube of required length No. 120.00 6490.00 778800.00

C.P Overhead shower 150 X150 mm with 450 mm long C.P Shower Arm

100mm dia. Heavy quality stainless steel Jali (grating) with or without holes for

(viii) waste pipe of floor / Nahani trap etc all complete as required at site as directed Each 240.00 177.00 42480.00

byengineer-in charge

Heavy quality CP Soap dish

15 mm dia .C.P brass two way bib cock with hand shower (health faucet) with flange

all complete as required at site as directed by the Engineer-in-Charge.

15 mm dia. C.P brass conceled stop cock with upper body plate

Providing and fixing glass shelf including bracket etc. all complete as directed by

ENGINEER IN CHARGE.

Providing and fixing table mounted sink mixture

xiv S/F 450 mm long pvc connection Each 480.00 177.00 84960.00

Providing & fixing in position vitreous china glazed wall mounted European WC of

standard size with either P trap as per site requirement and providing & fixing

conceled cistern with required material ,labour etc i/c cover plate all complete

Digitally signed by SANJAY

PLUMBING FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

Same as above but using extended wall mounted model with cistern

B/6 1 complete with cistern Each 60.00 29500.00 1770000.00

Providing and fixing in position 100 mm dia. and 75mm outlet pvc Nahani/ floor

trap having seal of 40 mm to 50mm, approved equivalent ISI mark having necessary

B/7 length of extension pipe wherever required including cutting of concrete and Each 120.00 885.00 106200.00

repairing with concrete after completion all complete.

Supplying and fixing table top square washbasin 40x40 cm with c.p waste

coupling and heavy duty waste pipe all complete as required at site as directed

by Engineer-in-Charge

Carefully removing the existing wash basin along with all accessories & fixing of 1st

quality centre hole white vitreous wash hand basin of size: 550 mm x 400 mm

[approx.] with a pair of C.I. / M.S brackets, 32mm dia C.P. waste coupling of

premium quality, connections pipes ,waste pipe etc. including providing and fixing in

B/9 position the required length 40 mm diameter CPVC waste pipe upto existing Each 60.00 4130.00 247800.00

Nahani Trap etc all complete as required

Fabricating ,supplying and fixing Vanity of required size approx 30 x 20 inch

made up of 18 mm HDHMR board ,.8 mm laminate on all internal faces and 1.0mm

on shutter with auto closing hinges and fixing of same with fastner etc. Rate are

inclusive of s/f galaxy black granite on top of vanity and making of

moulding all complete.

Total Rs. 14931720.00

Digitally signed by SANJAY

ELECTRICAL & ALLIED WORKS

S.No. E&M Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs)

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC

1 1.10 conduit, with modular switch, modular plate, suitable Gl box

and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface /

2 1.11 recessed medium class PVC conduit, 2 way modular switch, 70.00 Point 1562.00 109340.00

modular plate, suitable Gl box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable

etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

3 1.12 recessed medium class PVC conduit along with 1 No. 4 sq. mm 2400.00 Metre 334.00 801600.00

FRLS PVC insulated copper conductor single core cable for loop

Wiring foras circuit/

required.submain wiring along with earth wire with

4 1.14 the following sizes of FRLS PVC insulated copper conductor,

single core cable in surface/ recessed medium class PVC

conduit as required.

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 800.00 Metre 334.00 267200.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 400.00 Metre 439.00 175600.00

Rewiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable and 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable as earth wire in existing surface/

recessed steel/PVC conduit including dismantling as required.

Rewiring for twin control light point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable and 1.5 sq.mm

6 1.16 FRLS PVC insulated copper conductor single core cable as earth 40.00 Point 894.00 35760.00

wire in existing surface/ recessed steel/PVC conduit including

dismantling as required.

Supplying and drawing following sizes of FRLS PVC insulated

copper conductor, single core cable in the existing surface/

recessed steel/ PVC conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC

insulated annealed copper conductor, unarmored telephone

cable in the existing surface/ recessed steel/ PVC conduit as

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm

solid copper conductor PE insulated, shielded with fine tinned

9 1.19 copper braid and protected with PVC sheath in the existing 1000.00 Metre 47.00 47000.00

surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of steel conduit along

with accessories in surface/recess including painting in case of

10 1.20 surface conduit, or cutting the wall and making good the same

in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required.

Digitally signed by SANJAY

ELECTRICAL & ALLIED WORKS

S.No. E&M Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs)

Supplying and fixing suitable size Gl box with modular plate and

cover in front on surface or in recess, including providing and

12 1.31 fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular 360.00 No. 477.00 171720.00

switch, connections etc. as required.

Supplying and fixing suitable size Gl box with modular plate and

cover in front on surface or in recess, including providing and

13 1.32 fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A 300.00 No. 586.00 175800.00

modular switch, connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase,

14 1.38 V, complete as required. 30.00 No. 99.00 2970.00

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface/ recessed Steel/ PVC conduit as required.

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

16 1.55 conductor single core cable in surface/ recessed PVC conduit,

and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Supplying and fixing suitable size Gl box with modular plate and

cover in front on surface or in recess, including providing and

fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A

modular switch, connections etc. as required. (For light plugs to

be used in non residential buildings).

Supplying & fixing suitable size Gl box with modular plate and

cover in fronton surface or in recess including providing and

17 1.57 fixing 25 A modular socket outlet and 25 A modular SP MCB, 90.00 No. 727.00 65430.00

"C" curve including connections, painting etc. as required.

Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

18 2.4.1 surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/lsolator)

4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

19 2.10.1 following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

20 2.15 having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

Providing and fixing M.V. danger notice plate of 200 mm X 150

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in single

red colour on front side as required.

Providing and fixing H.T. danger notice plate of 250 mm X 200

mm, made of mild steel, at least 2 mm thick, and vitreous

enameled white on both sides, and with inscription in single

red colour on front side as required.

Earthing with G.l. earth pipe 4.5 metre long, 40 mm dia

including accessories, and providing masonry enclosure with

23 5.2 cover plate having locking arrangement and watering pipe etc. 3.00 No. 6855.00 20565.00

with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm

thick including accessories, and providing masonry enclosure

24 5.6 with cover plate having locking arrangement and watering pipe 4.00 Set 13838.00 55352.00

of 2.7 metre long etc. with charcoal/ coke and salt as required.

Digitally signed by SANJAY

ELECTRICAL & ALLIED WORKS

S.No. E&M Description of Item Quantity Unit Rate (Rs) DSR Amount(Rs)

Supplying and laying 6 SWG G.l. wire at 0.50 metre below

ground level for conductor earth electrode, including

connection/ termination with Gl thimble etc. as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre

below ground as strip earth electrode, including connection/

terminating with nut, bolt, spring, washer etc. as required.

(Jointing shall be done by overlapping and with 2 sets of brass

nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia

G.l. pipe from earth electrode including connection with brass

nut, bolt, spring, washer excavation and re-filling etc. as

Providing and fixing 25 mm X 5 mm copper strip on surface or

in recess for connections etc. as required.

Service of Installed capacity of transformer including

dehydration, reapir of any leakage, painting, replacing bushing,

terminal block , making out out 11 kv connection external

type,busing replacement, etc as required for per sit e condition

and direction of Engineer Incharge.

Service of Installed capacity of LT Distributioon panel

including dehydration, reapir of any damage aprts like door,

hinges, painting , replacing any switchgear, terminal block ,

making out out 440 kv connection external type, with required

cable, etc as required for per site condition and direction of

Engineer Incharge.

Digitally signed by SANJAY

ELECTRICAL FIXTURE WORKS

S.No. Description of item Unit Qty Rate Amount

Carefully disconnection and removing all fans, fittings, decorative lights, water

1 purifier, geysers, wires, conduits, casing capping , switch boards/ DB etc. in flat and JOB 26.00 5310.00 138060.00

keeping reusable items like exhaust fans ceiling/wall fans, LED batten water

purifier, geyser etc.

Supplying ,Fixing, testing and commissioning of following Electrical items with

2 necessary hardware

SITC of LED tube light fixture of 4’ length 36 Watt white colour LED tube light on

new white colour square PVC block and using two/three core copper conductor

A PVC insulated preferably white colourcable from tube light fixture to ceiling rose as No 234.00 1180.00 276120.00

directed by Engineer In Charge.

SITC of 48 inch BLDC Ceiling fan of approve shade with all

necessary mounting accessories with step regulator To provide 3 mm thick Bakelite

round plate with required hardware near the ceiling fan hook.

PVC exhaust fan of 200MM size with pvc louver protection complete with

required fittings and hardware etc. and using two/three core copper conductor

PVC insulated preferably white colourcable from exhaust fan to ceiling rose as No 78.00 1652.00 128856.00

directed by Engineer In Charge.

SITC of 25 litre horizontal/vertical geyser i/c all necessary hardware material etc .all

3 15 watt LED PANEL

SITC of 15 watt LED panel light at entrance, balconies and kitchen

A both surface and conceled type i/c connection and testing complete. No 364.00 1416.00 515424.00

SITC OF 18/20 Watt LED light on ceiling with required

hardware material all complete (Dinning room)

SITC of cabin fan 12 inch size on ceiling with required material No 26.00 2950.00 76700.00

4 SITC of fancy fittings No 286.00 5900.00 1687400.00

5 LED tube light

10 Watt 2 ft led fitting, White Colour No 78.00 354.00 27612.00

Total Rs 4644952.00

Digitally signed by SANJAY

STREET LIGHT WORKS

S.No Items Quantiy Unit Rate Amount

Fabrication, supply & erection of Supply Of 4mtr

Decorative Pole Decorative pole made of galvanised Mild

steel pipes fitted with cast aluminum, embellishments

duly polyurethane paint coated.

Top Dia 76.1, Bottom Dia 114.3, Base Plate

250x250x12mm on existing cement concrete pedestal as

required i/c supplying and fixing of the following in the

window box provided for cable termination:-

a) Supplying and fixing 6mm thick laminated mounted

sheet inside the window mounted on and i/c providing

and welding 3 nos. G.I. strips 4mm thick of suitable

length and having suitable size tapped holes - 10 nos. as

b) Supplying and fixing of 63 Amp terminal block suitable

for 25 Sq.mm conductor - 4 nos. & shorting links - 5 Nos.

on DIN channel i/c pdg. And fixing DIN channel of

suitable length - 2 Nos. on the existing laminated sheet.

c) Supplying and fixing 6 Amp SPMCB, 10 KA'C'

Characteristics Curve - 2 Nos. earth stud 1 No. welded at

suitable height two nos. washers, springs washers & nuts

Providing and laying in position M-20 (1:2:4) reinforced

cement concrete foundation of size 600 mm (L) x 600 mm

(W) and 1500 mm (D) i/c excavation of earth, providing

cutting, bending and placing in position, reinforcement

TMT bars of 12 mm dia -1600 mm long (approx)-8 nos.

and reinforcement ring of cold twisted bar of 8 mm dia -

2800 mm (approx) - 10 nos.(with 150 mm spacing) as

required with positioning of foundation bolts (as per item

below and) and providing 90 mm (O.D.) DWC, HPDE pipe

for cable entry and exit as reqd.

3 Supplying and fixing 4 Nos. 25mm dia X 700mm long Gl

foundation bolt (EN8 grade) with nuts. washer including 2

Nos. template of 4mm thick size 225 x 225 mm with 4

nos. 25 mm dia holes, to match with PCD of Pole base

Supplying,Installation,testing and commissioning of 45

watt LED Lights Decorative post top lantern made of cast

aluminium housing fitted with poly carbonate cover.

operatable in voltage range of 140-270V .

Supplying and drawing following size of PVC insultated

copper conductor multicore cable in the existing poles and

bracket from cable termination connector to the fitting i/c 12 job each job 150 1800

providing suitable copper lugs connectins etc as required

a) 3 core 1.5 sq.mm (For 4 mtr pole)

Supplying and laying of following size DWC HDPE pipe ISI

marked along with all accessories like socket, bend,

couplers etc. conforming to IS 14930, Part II complete

with fitting and cutting, jointing etc..direct in ground (75 0

cm below ground level) including excavation and refiling

the trench but excluding sand cushioning and protective

covering etc complete as required.

a) 63 mm dia (OD-63 mm & ID-51 mm nominal) 300 meter meter 250 75000

Digitally signed by SANJAY

STREET LIGHT WORKS

S.No Items Quantiy Unit Rate Amount

7 Supplying and Laying with end termination of XLPE ISI

Marked, Alumunium conductor arnoured cable in the 0

existing pipe as required

a) 4 x 16 sq.mm (From sub statio to feeder pillar) 25 meter meter 250 6250

Supplying and laying with end termination of following

sizes of XLPE Insulated PVC Sheathed Armoured Electric

Cables with Aluminium Conductor for Working Voltage 0

1.1 KV conforming to IS:7098 (Part-1)/ IS:1554 (Part-1)

complete etc as required.

9 SITC on wall FRP type water, weather and shock proof

junction box of approximate size 150 x200 x 100mm,

front openable and locable type and providing and fixing

16 amp terminal block suitable for 6 Sq.mm conductor - 4

nos and DIN channel of suitable length - 2 nos., 6 amp

SPMCB 10 KA 'C" characteristics curve - 2 nos., earth

stud 1 nos. 2 nos. washer, spring washer and nuts etc as

10 Providing and fixing 6 SWG dia G.I wire on surface or in

recess for loop earthing along with existing

surface/recessed conduit/submain wiring/cable as

11 Earthing with GI earth pipe 4.5mtr long x 40mm dia

including accessories & providing masonary enclosure

with cover plate having locking arrangement with salt

&charcoal etc. as required.

SITC of Mushroom flat top, environmental friendly sleek

energy efficient garden luminaire, symmetrical light

distribution having following technical specifications

including making suitable height robust cement concrete

foundation having provision for cable entry and

connection for bollard etc., as required.

Technical Specications

Luminaire made of Hot dip galvanised with die-cast

aluminium components and non corrosive SS fasteners.

High efciency translucent acrylic diffuser for glare free,

uniform light distribution.

GI mounting plate for bolting onto a foundation.

Luminaire can be aligned on the mounting plate around

Cable entries for through-wiring of mains supply cable

(max. 3 x 0.5 Sqmm)

Integral power supply

Earth connection

Protection class IP 54

Suitable for operation on 240V, 50Hz single phase ac

Cool White (6000-6200K), Warm White (2700-3000K)

Hot dip galvanised mounting plate with three GI steel

square head coach screws.

Digitally signed by SANJAY

STREET LIGHT WORKS

S.No Items Quantiy Unit Rate Amount

Supplying,Installation,testing and commissioning of 45

watt LED Lights Decorative post top lantern made of cast

aluminium housing fitted with poly carbonate cover.

operatable in voltage range of 140-270V .

Total Rs 765606.000

Digitally signed by SANJAY

FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)

S.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

Supplying, installation, testing & commissioning of

smoke detector with builtin LED and mounting base

complete with all connections etc. as required.

Supplying, installation, testing & commissioning of

manual call boxes of MS construction in

2 17.1.3 surface/recess with stainless steel chain & hammer 10.00 474.00 Each 4740.00

assembly complete with glass and push button etc. as

Supplying, installation, testing & commissioning

response indicator on surface/recess MS box having

3 17.1.5 two LEDs metallic cover complete with all 10.00 196.00 Each 1960.00

connections etc. as required.

Supplying, installation, testing & commissioning fire

alarm sounder with facility to make announcement,

mounted in M.S. box (16 SWG) with hinged cover

plate & suitable for operation with amplifier i/c line

matching transformer etc. complete as required.

Supplying, installation, testing & commissioning talk

back slave station in surface/recess suitable for

operation on simplex mode complete with P.T.T. knob

5 17.1.8 & speaker/microphone enclosed in a M.S.(16 SWG)/ 1.00 905.00 Each 905.00

ABS box with break glass in front etc. complete as

Supplying, installation, testing & commissioning sector

panel suitable for following zones, complete with

visual indications for short circuit fault, open circuit

fault, fire condition and all other standard facilities as

per IS:2189 with mimic diagram for all area/zone

covered, complete with all connections,

interconnections as required.

Supplying, installation, testing & commissioning of

main control and indicating panel made out of 16

SWG MS sheet to accommodate the following items

duly powder coated in approved colour with louvers

for ventilation, locking arrangement, audio and visual

indication for fire alarm and public address system,

monitoring system including connections,

interconnections etc complete as required.

a) 10 Zone panel for fire alarm system

b) 250 Watt amplifier racks suitable for operation on

230V AC/24V DC supply conforming to IEC-268-3

complete with all accessories as required - 2 Nos.(one

to act as standby)

c) Talk back master station with LED PTT (press to

talk) push button for operation on 230V AC/24 V DC

supply conforming to I EC-268 for simplex mode of

operation/communication suitable for 20 Nos.talk

back unit -1 set.

Digitally signed by SANJAY

FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)

S.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

d) Annoucement control desk suitable for selection of

different zones selectively and ON ALL CALL switch

with visual indication etc. complete as required -1 set.

e) Amplifier change over switch for inter changing

amplifier -1 No.

f) Monitor panel for loudspeaker complete with

output selector, ON/OFF switch, fuse, visual

indications etc. complete as required-1 No.

g) Gooseneck microphone with stand and ON/OFF

h) Main ON/OFF switch, fuse indication lamps, DC and

AC voltmeters & ammeters, terminal blocks etc.

complete as required -1 set.

i) Battery charger trickle cum boost to take complete

load of fire alarm & PA system complete with all

accessories including providing & fixing of 2 nos.12 1.00 70389.00 Each 70389.00

volt, 60 AH each sealed maintenance free batteries-1

Supplying & laying of 2x1.5 sqmm fire alarm

armoured cable, 600/1000V rated with annealed

8 17.5.2 copper conductor having XLPE insulation, steel wire 500.00 173.00 Metre 86500.00

armouring & ERLS outer sheath complete as required.

Total Rs. 190460.00

Digitally signed by SANJAY

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit DSR Amount(Rs)

Supplying, installation, testing and

commissioning of Electric driven Main Fire

Pump suitable for automatic operation and

consisting of following, complete in all

respects, as required :

(a) Horizontal type, multistage, centrifugal,

split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical

seal conforming to IS 1520.

(b) Suitable HP Squirrel cage induction motor,

TEFC, synchronous speed 1500 RPM, suitable

for operation on 415 volts, 3 phase 50 Hz, AC

1 supply with IP 55 protection for enclosure,

horizontal foot mounted type with Class-'F'

insulation, conforming to IS-325.

(c) M.S. fabricated Common base plate,

coupling, coupling guard, foundation bolts

etc. as required.

(d) Suitable cement concrete foundation duly

plastered with anti vibration pads.

Note: *The head of the pump is selected in a

manner so as to give a minimum 3.5kgf/cm2

pressure at the highest/farthest point.

Supplying, installation, testing and

commissioning of electric driven

pressurisation pump suitable for automatic

operation and consisting of following,

complete in all respects, as required : (Jockey

Horizontal type, multistage, centrifugal pump

of cast iron body and bronze impeller with

stainless steel shaft, mechanical seal

conforming to IS : 1520.

3 Suitable HP squirell cage induction motor

TEFC type suitable for operation on 415 volts,

3 phase 50 Hz AC supply with IP 55 class of

protection for enclosure, horizontal foot

mounted type with Class-'F' insulation,

conforming to IS : 325.

M.S.fabricated Common base plate, coupling,

coupling guard, foundation bolts etc. as

required. Suitable cement concrete

foundation duly plastered and with anti

vibration pads.

Supplying, installation, testing and

commissioning of electric driven terrace

pump suitable for automatic operation and

consisting of following, complete in all

respects, as required: (Terrace Pump)

a) Horizontal type, multistage, centrifugal,

split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical

confirming to IS : 1520

Digitally signed by SANJAY

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit DSR Amount(Rs)

4 b) Suitable HP squirell cage induction motor

TEFC type suitable for operation on 415 volts,

3 phase, 50 Hz, AC supply with IP55 class of

protection for enclosure, horiziontal foot

mounted type with Class-'F' insulation,

conforming to IS-325.

c) M.S.fabricated common base plate,

coupling, coupling guard, foundation bolts

etc.as required.

d) Suitable cement concrete foundation duly

plastered and with anti vibration pads.

e) Suitable starter panel integrated with fire

Fabrication, supply, Insallation testing &

commissioning of Electrical control panel of

cubical construction, floor mounted type,

fabricated out of 2mm thick CRCA sheet,

compartmentalised with hinged lockable

doors, dust and vermin proof, powder coated

of approved shade after 7 tank treatment

process, cable alley, inter- connection with

suitable size copper conductor cable/solid

copper strip, having switchgears and

accessories, mountings and internal wiring,

earth terminals, numbering etc. complete in

all respect, suitable for main fire pump,

pressurisation pump & diesel pump set

complete as per CPWD specification with

following in coming and Outgoings, suitable

for operation on 415V, 3 phase, 50Hz Ac

Supply with enclosure protection class IP 42

250A, 50kA 4 Pole MCCB, Ics=100% Icu rating

Digital Voltmeter 0-500V with selector switch

Digital Ammeter (0-250 A) with selector

swtich & CTs etc.

LED type RYB phase indicating lamps, ON,

OFF, trip indicating lamps Set of Copper Bus

( Note : All outgoing feeders for pumps should

have digital Ammeter with selector switches,

and LED type ON, OFF, trip indicating lamps)

125 A, 50kA TPN MCCB, Ics=100% Icu, with

fully automatic Star/Delta starter suitable for

60 HP pump with overload protection, current

sensing type single phase preventor complete

with all acceessories and internal wiring

required for automatic operation, selector

switch for local/remote, auto/manual/OFF

Digitally signed by SANJAY

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit DSR Amount(Rs)

63 A, 50kA TPN MCCB, Ics=100% Icu, with

suitable HP fully automatic Star/Delta starter

with overload protection, current sensing

type single phase preventor complete with all

acceessories and internal wiring required for

automatic operation, selector switch for

local/remote, auto/manual/OFF operation.

DIESEL ENGINE CONTROL

Control for diesel engine comprising -

Automatic/ Manual selctor switch & 3

attempts starting device, timers and relays as

required, push buttons, start/stop in manual

Indicating lamp for high/ Low Lub. Oil

pressure, High Water Temp and Engine on

Battery charger suitbale for 12V/24 V DC with

boost and trickle selector switch, 0-30 V DC

volt meter, and 0- 20 A DC Ammeter

All standard relays and accessories for

automatic operation of diesel engine.

System Controller 1.00 245730.00 Set 245730.00

PIPES & ACCESSORIES

Providing, laying, testing & commissioning of

'C' class heavy duty MS pipe conforming to IS

3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the

11 wall/ceiling with suitable clamp/support

frame and painting with two or more coats of

synthetic enamel paint of required shade

complete as required in ground with coating

and wraping as per site condition :

Providing, laying, testing & commissioning of

'C' class heavy duty MS pipe conforming to IS

3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts,

12 gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support

frame and painting with two or more coats of

synthetic enamel paint of required shade

complete as required :

Providing, laying, testing & commissioning of

'B' class heavy duty G.I. pipe conforming to IS

1239 including welding, fittings like elbows,

tees, flanges, tapers, nuts, bolts, gaskets etc.

and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting

with two or more coats of synthetic enamel

paint of required shade complete as required

Supplying and fixing Single headed external

yard /internal hydrant valve with 1 No. 63 mm

dia instantaneous FM Gunmetal/Stainless

Steel coupling and cast iron wheel, ISI

marked, conforming to IS 5290 (type A) with

blank Gunmetal/Stainless Steel cap and chain

Digitally signed by SANJAY

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit DSR Amount(Rs)

18.10.2 Single headed Stainless steel 14.00 6139.00 Set 85946.00

Supplying, fixing, testing and commissioning

of butterfly valve of PN 1.6 rating with

bronze/gunmetal seat duly ISI marked

complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as

Supplying, fixing, testing & commissioning of

double flanged sluice valve of rating PN 1.6

with non rising spindle, bronze/gun metal

seat, ISI marked complete with nuts, bolts,

washers, gaskets and conforming to IS 780 of

following sizes as required :

18.13 Supplying and fixing orifice plate made out of

6 mm thick stainless steel (Grade 304) with

orifice of required size to be fitted between

flange & landing valve of external and internal 14.00 1321.00 Each 18494.00

hydrants to reduce pressure at the outlet to

the level of 3.5 kg/cm2 complete as required.

18.14 Providing, installation, testing and

commissioning of non-return valve of

following sizes confirming to IS: 5312

complete with rubber gasket, GI bolts, nuts,

washers etc.as required :

Providing, installation, testing and

commissioning of stainless steel Y-strainer

fabricated out of 1.6 mm thick stainless steel,

Grade 304, sheet with 3 mm dia holes with

stainless steel flange.

Supplying and fixing 63 mm dia, 15 m long RRL

hose pipe with 63 mm dia male and female

couplings duly bound with GI wire, rivets etc.

conforming to IS 636 (type-A) as required :

18.16.2 Stainless Steel (Grade 304) 28.00 4448.00 Set 124544.00

18.17 Supplying and fixing first-aid Hose Reel with

MS construction spray painted in post office

red, conforming to IS 884 complete with the

following as required. 20 mm nominal internal

dia water hose thermoplastic (Textile

reinforced) type -2 as per IS: 12585 20 mm

nominal internal dia gun metal globe valve &

Drum and brackets for fixing the equipmets

on wall. Connections from riser with 25 mm

dia stop gun metal valve & M.S. Pipe and

Supplying & fixing 63 mm dia gun metal short

branch pipe with 20 mm nominal internal

diameter size nozzle conforming to IS 903

suitable for instantaneous connection to

interconnect hose pipe coupling as required :

18.18.2 Stainless Steel (Grade 304) 14.00 1662.00 Nos. 23268.00

Digitally signed by SANJAY

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit DSR Amount(Rs)

Supplying and fixing of fire brigade

connection of cast iron body with gun metal

male instantaneous inlet couplings complete

with cap and chain as reqd. for suitable dia

MS pipe connection conforming to IS 904 as

18.20 Supplying and fixing air vessel made of 250

mm dia, 8 mm thick MS sheet, 1200 mm in

height with air release valve on top and

flanged connection to riser, drain

arrangement with 25 mm dia gun metal

wheel valve with required accessories,

pressure gauge and paintingwith synthetic

enamel paint of approved shade as required.

18.22 Providing & fixing of pressure switch in M.S.

pipe line including connection etc. as 4.00 1546.00 Each 6184.00

Providing & fixing flow switch in following

sizes M.S. pipe including connection etc as

18.23.1 required.

Supply & fixing double flanged flexicon

rubber expansion joint with unit control of

NS standard length as per OEM specs. Tested to 4.00 6800.00 Set 27200.00

pressure of 15 kg/sqcm including rubber

gaskets, flanges, nuts, bolts and washers

complete as required.

Supply & fixing of hose cabinet of size 750

mm X 600 mmX 250 mm made of 1.6 mm

thick MS sheet with 6 mm thick glazed glass

door including necessary locking arrangement

suitable to accommodate external hydrant

with butterfly valve , 2 nos. 15 mtrs hose pipe,

NS 1 branch pipe, axe, mounted on wall or raised 8.00 5249.00 Set 41992.00

brick platform & duly painted with post office

red externally and white internally with

synthetic enamel paint complete in all respect

for external hydrant as required as per site

Supply & fixing of hose cabinet of size 0.9 M

Wide X 1.8 M height indoor hose cabinet

shutter made of MS sheet with 6 mm thick

glazed glass door including necessary locking

arrangement suitable to accommodate

internal hydrant with butterfly valve , 2

nos.RRL hose pipe, 1 branch pipe, axe, duly

painted with post office red externally and

white internally with synthetic enamel paint

complete in all respect for external hydrant as

required as per site condition.

Supply & fixing of Fire Man Axe with heavy

insulated rubber tersted upto 20 KV and

NS confriming to IS 926 as required as per site 14.00 8169.00 Set 114366.00

NS Supply & fixing fire extinguisher as per IS 0.00

4.5 kg CO2 gas filling ration not more than

Digitally signed by SANJAY

FIRE FIGHTING WORKS

S.No. 22EM Description of Item Quantity Rate (Rs) Unit DSR Amount(Rs)

SITC of automatic starter for water lifting from

sump to terrace having all type of protection

and auto start on low level of water and auto

stop on over flow of water up to 5 KW pump

including necessary control wring from tank

to starter/pump atc complete in all respect as

site condition.

Supply & fixing of MS structureal work

fabricated from standard sections for hangers,

NS supports clamps as per site conditions and 200.00 142.20 kg 28440.00

direction of Engineer In charge

SITC of emegency light with built in battery

NS for 1 hrs back upto 5 watt in common area 20.00 3000.00 Nos. 60000.00

SITC of emegency self glow signages as per

SITC of Electrical SIDBI SIGN Board as per

NS direction Engineer Incharge 1.00 50000.00 Nos. 50000.00

SITC of SIDBI SIGN Board as per direction

NS Engineer Incharge 1.00 25000.00 Nos. 25000.00

Supply & fixing of resilient rubber neoprene

lined style arch vibration eleimatiors suitable

for raw water upto pressure 20 kg/sq cm 80

Supply & fixing of pressure switches for main,

jockey and stand by deisel pumps, including

7 NS necessary wiring upto control panel and ball 1.00 1978.00 Set 1978.00

Supply & fixing of 100 mm dia bourden type,

ss dial type pressure gauge (0-16 Kg) range,

8 NS 3/8 BSP button entery on pump delivery line 1.00 825.00 Set 825.00

complete with ball valve

Supply & fixing of vane type water flow

switches with contacts for installation in 50

9 NS mm to 150 mm dia. MS pipe for a service 1.00 4712.00 Set 4712.00

presuure up to 20 kg /sqcm

Supply & fixing of pressure transducer in MS

10 NS pipe line suitable for 12 Volts/24 volts DC 1.00 3591.00 Set 3591.00

including connection etc as required

Digitally signed by SANJAY

S.No. E&M Description of Item Quantity Rate (Rs) Unit Amount(Rs)

SITC of 4MP 1/2.7" 4MP ps CMOS image sensor

(0.9407centimeter afax 5mp 2880x1620@ 20fps and

support 2688x1520@25/30fps stream H.265+ and

1 NS smart H.264 duel stream encoding DWDR. Day/night 10.00 4824.00 Nos. 48240.00

ICR 3D NR,ROI,AWB,AGC,BLC,HLC3.6mm lens IR range

30Mtrs. IP67 POE, support built in mic and mobile

software ICMOB Software KVMS Pro

Sitc of 64 ch 5mp input max 320mbps incoming

bandwidth instastream/H 265/smart H-264/MJPEG up

to 12 mp resolution preview and play back support

2 NS 8sata HDD , 4usb ports (2usb3.0), 1 eSATA port 2HDMI / 1.00 58960.00 Set 58960.00

2 VGA simu- video output support multi brand network

cameras support RAID 0/1/5/10 Mobile software ,

iCMOB gCMOB CMS SOFTWARE KVMS pro

3 NS SITC OF 16 port POE rack mountable 1.00 12730.00 Set 12730.00

4 NS SITC OF 8 port POE rack mountable 2.00 6700.00 Set 13400.00

6 NS SITC of 10TB servillance hard disk Drive 1.00 34840.00 Set 34840.00

Supply and fixing of (32 inches ) Full HD LED Display TV

8 NS having display resolution of 1920x 1080 1.00 34840.00 Set 34840.00

9 NS SITC of Network Rack 9U wall rack 1.00 6432.00 Set 6432.00

10 NS Supply and laying of armoured UTP 4pair Cat6 cable 500.00 120.60 rmt 60300.00

11 NS Supply and laying of HDPE rigid /flexible heavy conduit 500.00 53.60 rmt 26800.00

Total Rs 296542.00

Digitally signed by SANJAY

LIGHTING ARESTOR ESE TYPE

S.No. Description of Item Quantity Rate (Rs) Unit Amount(Rs)

SITC of ESE type lighting arestor for radius 75-107

GI Mast Total 5 Mtr std mast reqd. for mounting the

terminal & adaptor to mount the Air Terminal with

2 NS Coupler/reducer, Multi strand stray wires, Joints, Clamps 1.00 12800.00 Set 12800.00

Test Link Joint Kit in a IP 55 weather proof enclosure of

3 NS suitable dimension and approved make & design. 1.00 3200.00 Set 3200.00

Lightning Strike recorder LSC 6 Digit shall be weather

proof type., It’s should have 6 digit event count and the

capacity to count smallest strike (3kA). It should be a

4 NS voltage sensing type counter, so that it will not register 2.00 16800.00 Set 33600.00

nearby strikes and static discharges due to induction

Supply of UL Listed long life Maintenance Free Earthing

CO. BONDED - UL Listed, 10feet long 17.2 mm dia 250

Micron,with U Clamp.The BackFill , eco friendly, non

6 NS degradable and non soluble. The earthing pit shall be 1.00 20000.00 Set 20000.00

designed and supplied with Poly-plastic Pit Cover non

conductive, environment friendly.

Recommended : 70 Sqr mm Copper Cable..lightning

8 NS current dissipation to earth with necessary Fixing Clamp, 70.00 1150.00 Set 80500.00

Connector accessories etc.

Installation & Commissioning price include Base plate

9 NS with base mast and accessories, 1.00 20000.00 Set 20000.00

Total Rs 285100.00

Digitally signed by SANJAY

S.No. 22E&M Description of Item Quantity Rate (Rs) Unit Amount(Rs)

OUT DOOR ACOUSTIC ENCLOSED CANOPY TYPE DG SET 40 KVA

1 NS CONSISTING OF FOLLOWING

Supply, receive, store, unpack at site, install, testing and

commissioning of Appropriate BHP prime rated diesel generating

set coupled to 40 KVA Alternator with Electronic Governor, 3 ph,

50 Hz, 415V, along with Radiator type of cooling and associated

2 NS equipment complete set including necessary appropriate

armoured cabling as specified in the technical specification and

civil works if required for proper installation of the D.G.Set

Built in AMF control panel with battery charger including 1.00 794934.00 Nos. 794934.00

suitable isolator

4 NS AVM pads 'S' Type Kushi foot mounting with accessories

Residential Quality Silencer (Includes flexible coupling )

with cladding as per specification.

8 NS Fuel Tank

Supply and Installation of Batteries with stand with

initial charging.

10 NS Cable adopter box as per site requirement.

Power and control cabling, connection to existing panels.

11 NS Complete earthing system ( 2 nos each for neutral and 2 for body) 1 34500.00 Nos. 34500.00

with earth pit and earthing strip connections.

Exhaust pipes arrangements as required to suit conditions

and statutory requirements, if any

Buy back of existing DG Set along with accessories in as is where

is condition. Amount quoted against this item shall be paid by the

Total Rs 897234.00

Digitally signed by SANJAY

S.No. 22EM Description of Item Quantity Rate (Rs) Unit Amount(Rs)

Supply, Installation, Testing and Commissioning of ongrid Solar

Photovoltaic Power Plant conforming to MNRE specifications as

amended, consisting of Mono/ Poly Crystalline silicon solar

cells, net metering facility, necessary protections, earthing,

mounted on Aluminium/ GI structure of suitable strength with

following components complete as required:-

a) Solar Photovoltaic Module of capacity 540Wp or above,

manufactured in India, conforming to IS 14286/IEC 61215,

IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic

Module conversion efficiency shall not be less than 16.5%. PV

modules used in solar power plants/ systems must be 36.00 25001.46 Nos. 900053.00

warranted for their output peak watt capacity, which should

not be less than 90% at the end of 10 years and 80% at the end

b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage

range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz,

1 NS output voltage suitable to generate AC Power with efficiency

not less than 97%, total harmonic distortion less than 3% and

suitable for ambient temperature from 0 to 50 degree C. The

PCU shall adjust the voltage and frequency level to suit the Grid

Voltage Frequency.

c) Data Monitoring System complete with accessories.

d) Fixing of Array junction box & Main junction box with IP 65

protection and termination arrangement for incoming and

outgoing cable along with glands, lugs and other accessories

etc. as required.

e) Lightning and surge voltage protection. f) Connections &

Interconnections by supplying & fixing required size XLPE

insulated copper conductor 1.1 kV grade armoured power and

control cables between solar modules, main power cable to

grid supply PCU unit along with supplying & fixing of necessary

channel/conduit lugs and other accessories etc. as required.

Solar hybrid power conditioning unit 20 KW 240 V ( 3Ph input

3 NS Solar Tall Tublar Battery C-10 Type12/V150 AH 20.00 17742.38 Nos. 354848.00

4 NS Earthing, cabling and other accessories , minor civil works etc. 1.00 360021.02 Nos. 360021.00

Supply & fixing of MS structureal work fabricated from

5 NS standard sections for hangers, supports clamps as per site 2000.00 142.20 kg 284400.00

conditions and direction of Engineer In charge

Total Rs. 2191866.00

Digitally signed by SANJAY