PERIODICAL SERVICES OF MAP PH-I QUARTERS AT AH ENCLAVE AT MIL STN SRI GANGANAGAR

Amount

Taking down cement plaster on brick wall including racking out joints, hacking for keys scrubbing down with water complete all as specified directed by Engr-in-Charge.

M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

S&F in repairs of GI wire netting 0.90mm dia and 12mm mesh lathing by means of fasteners of requierd length and spacing beetween fasterners is 300mm centre to centre both way to concrete surface etc,in walls,ceilings,stanchions,beams,etc including all laps,cutting and waste etc complete all as specified and directed by Engineer-in- charge

Material and labour for repair of chajja facia using cement mortar (1:3) n.exc 300 mm girth finishing the surface even and smooth complete all as specified and as directed by Engineer-in-Charge.

M&L for applying one coats of Dr Fixit pidicrete URP in chajja, staircase. etc by using 2 Sqm per 1 Kg URP + cement in the proportion of (1:1.5) and making pedicrete solution and applying by brush complete all as specified and as directed by Engineer-in-Charge.

M&L two coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified directed by Engr-in-Charge.

M&L for prepration of New plastered Internal wall surface complete applying the following :- (a) Applying wall care putty on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directed coomplete all as specified and as directed by Engineer-in-charge (b) Applying two coats of acrylic emulsion over a coat of primer by using Brush / Roller over complete all as specified directed by Engr-in-Charge. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible

M&L one coat of white wash on old decorated plastered or un-plastered surfaces of walls including preparation of surfaces complete all as specified directed by Engr-in-Charge.

M&L one coat of white wash on old decorated plastered or un-plastered surfaces of ceiling including preparation of surfaces complete all as specified directed by Engr-in-Charge.

M&L for complete removal of existing treatment on old wall surface smoothening the surface with sand papers / Mechanized sanding etc complete all as specified directed by Engr-in-Charge.

M & L for preparation of surfaces and applying a coat of primer on old prepared surface of wall by using Roller complete all as specified directed by Engr-in-Charge.

M & L for preparation of surfaces with 1.5 mm thick wall care putty on wall , including smooth finishing to receive finishes etc complete all as specified directed by Engr-in-Charge.

M&L one coat of acrylic emulsion on old decorated internal surface of walls and using putty to fill the depressed surface to make the surface even and smooth including preparation of surfaces complete all as specified directed by Engr-in-Charge.

M&L two coats of interior acrylic emulsion of approved tint on old prepared surface by using Roller over complete all as specified directed by Engr-in-Charge.

M&L applying two coats of premium acrylic smooth exterior weatherproof Apex paint on old external surfaces of wall and using putty to fill the depressed surface to make the surface even and smooth including preparation of surfaces complete all as specified directed by Engr-in-Charge.

M&L applying two coats of cement base paint on old decorated plastered surface of walls including preparation of surfaces complete all as specified directed by Engr-in-Charge.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified directed by Engr-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified directed by Engr-in-Charge.

M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed by Engineer - in - Charge.

M&L for Writing letters or figures with fluorecent paint ( Block. Roman, Italic or Indian) n exc. 30 cm high etc complete all as specified and directed by Engineer - in - Charge.

Taking down and Refixing old 500 Ltrs capacity Rotational moulded polyethylen water storage tank after cleaning and removing all scale and dirt etc from tanks and from mouths of cirulating pipes etc complete all as specified directed by Engr-in-Charge.

S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered(white coloured) (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down of Old PVC Tank complete all as specified directed by Engr-in-Charge.

S&F 20 mm bore ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified directed by Engr-in-Charge.

S&F in repair 20 mm bore ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified directed by Engr-in-Charge.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing complete all as specified directed by Engr-in-Charge.

Ditto- but refixing 15 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified directed by Engr-in-Charge.

S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified directed by Engr-in-Charge.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing complete all as specified directed by Engr-in-Charge.

Ditto- but refixing 20 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified directed by Engr-in-Charge.

S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified directed by Engr-in-Charge.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. In brick walls complete all as specified directed by Engr-in-Charge.

S&F in repairs 15mm bore bib tap(long body), cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified directed by Engr-in-Charge.

S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified directed by Engr-in-Charge.

S&F in repair CP two way bib tap for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified directed by Engr-in-Charge.

S & F in repairs swan neck pillar cock 15mm dia cast copper alloy with capston heads, chromium plated, fancy type with long screwed shanks and fly nuts, screwed down high pressure with or without lettered 'Hot' or 'Cold' screwed for iron pipe complete all as specified directed by Engr-in-Charge.

S&F in repair central hole wash basin mixer 15mm bore brass waste with 10mm dia 450mm long copper pipes complete all as specified directed by Engr-in-Charge.

S&F in repair shower health faucet to EWC ,CP brass with minimum 1000 mm long CP flexible pipe, connection etc., complete all as specified directed by Engr-in-Charge.

S&F in repairs Jet spray for EWC with all fixing arrangements complete all as specified and directed by Engineer in charge.

S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified directed by Engr-in-Charge.

S & F waste couplings of stainless steel (half or full threaded) of 32/40 mm bore complete all as specified directed by Engr-in-Charge.

S & F in repairs 32mm bore waste pipe fittings brass chromium plated for glazed ware sink,basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified directed by Engr-in-Charge.

S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified directed by Engr-in-Charge.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.including taking down ms frame and refing ms frame with new wire mesh with tinned tack/by welding in steel window/ventilator /door and making good the disturbed portion during execution complete all as specified directed by Engr-in-Charge.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning (measured overall as fixed along the centre line over fittings and accessories) complete all as specified directed by Engr-in-Charge.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified directed by Engr-in-Charge.

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified directed by Engr-in-Charge.

S & F in repair Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed by Engineer - in - Charge.

M&L for 25mm dia fancy type PVC coated MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified directed by Engr-in-Charge. (Note : The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.)

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

BISHNOI BUILDERS