CERTAIN REPAIRS TO JOINERY CEILING PLUMBING TILING SUNKEN FLOORS ROOF TREATMENT PLINTH PROTECTION ETC AT ZONE G AREA EXCEPT TRISHUL LINES AND MES LOLONY UNDER AGE BR N NO II OF GE N SECUNDERABAD

Amount

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (below & above ground level) complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection at 3 metre interval and every change of direction duly filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed

M&L for PCC 100 mm thick type B1 (1:2:4) (by using 20mm graded aggregate ) as in floors, paths, etc. laid in panels including finished the surface smooth and even without using extra cement complete all as specified and as directed.

Demolition of concrete of any description and in any position as in sunken floors etc. complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware AC or Reinforced concrete) set in cement mortar 100mm dia complete all as specified and as directed.

All as per item No 5 above but 75mm bore complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and painted in any mortar complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work ( table rubbed and polished) in steps, jambs, pillars, window-ciils, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stain less steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x bowl size 410 mm x 330mm x 160 mm complete all as specified and as directed.

M&L for rough shahabad stone flooring bedded in CM (1:6) 20mm thick (min) jointed and pointed in CM (1:3), thickness of stone slab varying from 20 to 30 mm complete all as specified and as directed.

M & L for 15 mm bore steel water tubing, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down etc steel tubing and connections complete all as specified and as directed.

M & L for 20 mm bore steel water tubing, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down old steel tubing and connections complete all as specified and as directed.

M & L for 25 mm bore steel water tubing, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down old steel tubing and connections complete all as specified and as directed.

Taking down chowkats with shutters (w/o taking of shutters from the frame not exceeding 1.50 Sqm Each complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube supplying & fixing in openings as per specification & drawings complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per drawings and specifications complete all as specified and as directed.

S & F stainless steel butt hinges 100mm long with stainless steel hinge pin complete all as specified and as directed.

S & F Aluminum anodized barrel tower bolt 150mm size of extruded section complete all as specified and as directed.

S & F 150mm long extruded aluminum alloy handles fabricated type anodized complete all as specified and as directed.

M & L for Application of one coat of water based bitumen emulsion primer @ 0.3 lit per sqm including cleaning of surface thoroughly from dust & dirt. Lay water proofing treatment with polymeric membrane 3 Kg/ sqm standard consisting of 90 micron, HMHDPE torch on membrane over a coat of blown bitumen 85/25 @ 1.2 Kg/sqm on top of membrane and providing 25 mm thick sand cushioning to receive lean concrete in sunken floor complete all as specified and as directed.

M & L rendering 15mm thick in CM (1:3) on fair faces of brick/concrete surfaces of sunken floors, including taking down extg plaster and mixing of water proofing compound, finished even and fair complete all as specified and as directed. NOTE: WPC will be measured and paid separately.

M&L for PCC (1:7:12) type F2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate of avg 25 mm thick make to slope in sunken floors/ floors complete all as specified and as directed.

S & F in repairs 32 mm dia GI pipe medium grade in short lengths for spouts including cutting holes in walls and making good with CM (1:3) complete all as specified and as directed.

M&L for Non skid ceramic coloured joint free tiles 7 to 8 mm thick area of each tile exc 0.11 but n exc 0.18 sqm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with 15mm thick screed bed in CM (1:6) including dismantling of existing tiles complete all as specified and as directed.

M&L Non skid ceramic coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 but not exceeding 0.18 sqm in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with 10mm thick rendering in CM (1:6) as in backing coat of tiles including dismantling of existing tiles complete all as specified and as directed.

M&L Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 as in walls etc incl demolition of brick work built in cement mortar complete all as specified and as directed.

M & L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed.

M & L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth w/o using extra cement incl taking down existing plastering including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished fair and even without using extra cement including taking down existing plastering raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for Rendering 5mm thick on concrete surfaces in cement mortar 1:3 in ceiling and finished even and smooth without using extra cement and including taking down existing plastering complete all as specified and as directed.

M & L for 40mm thick cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in floors including finished the surface smooth and even using extra cement complete all as specified and as directed.

M &L for three coats of white wash on walls including preparation of new surfaces complete all as specified and as directed.

M &L for two coats of colour wash over a coat of white wash on walls including preparation of new surfaces complete all as specified and as directed.

M &L for three coats of white wash on ceiling including preparation of new surfaces complete all as specified and as directed.

Supply and fixing 40mm high density polyethylene pipe (HDPE) of pressure rating 6 Kg/ Sq cm fixed complete to walls ceiling or in floors etc complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 300x300x7 to 8mm thick (square/rectangular) area of each tiles exc 0.6 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in near cement slurry and pointed in coloured cement to match with 15mm thick screed bed in CM (1:6) including dismantling of existing tiles complete all as specified and as directed.

M & L coloured glazed ceramic tiles 300x200x7mm thick on vertical surfaces set and jointed neat cement slurry and pointed in coloured cement to match with 10mm thick rendering in CM (1:4) as in backing coat of tiles including dismantling of existing tiles complete all as specified and as directed.

S & F in repairs Vitreous china Squatting pan Orissa pattern size 580 x 440mm white with integral foot rest including connection to trap, and to flush pipe anti syphonage pipe etc complete all as specified and as directed.

Taking out existing unserviceable water closet, pedestal pattern of any size and supply & fix vitreous China wash down water closet pan (pedestal Pattern) white including fixing bolts, including making good to floor to match with adjoining surfaces complete all as specified and as directed.

M&L for Vitreous china wash hand basin, white, flat back of size 550x 400 mm fixed in repairs including waste pipe, (pipe of bore 32mm) waste coupling brackets, etc. complete all as specified and as directed.

S&F in repairs WHB Vitreous china glazed of size 550x440mm, oval type coloured including cutting for & pinning in ends of brackets or existing stand including CP waste pipe and fitting 32mm complete all as specified and as directed.

S&F in repairs 15mm dia pillar taps SWAN NECK type copper alloy with capstan head chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

M & L for 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, fixed in repairs complete all as specified and as directed.

S&F in repairs for 300 mm MS ordinary rat tail rod pattern springs and including roller and roller plate complete all as specified and as directed.

S&F in repairs Swivel shower of PTMT of any colour for fixing with 15 mm pipe (Min weight 40 gms) complete all as specified and as directed.

S&F in repairs for 40mm dia waste coupling of PTMT (Hall or full thread) (Min weight 45 gms) complete all as specified and as directed.

S&F in repairs for Bib tap standard of PTMT 15mm bore any colour screwed for iron pipe and complete all as specified and as directed.

S&F in repairs for Pillars taps of PTMT any colour in screwed for iron pipe and fixed 15 mm dia (Min weight 110 gms) complete all as specified and as directed.

S&F in repairs for Stop valve of PTMT 15mm bore any colour in screwed for iron pipe and complete all as specified and as directed.

S&F in repairs 15mm dia Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.

All as per item 52 above but 20mm bore complete all as specified and as directed.

S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F in repairs 110 mm dia UPVC/PVC (SWR) bends, of any radius in place of AC bends complete all as specified and as directed.

All as per item No 55 above but 75mm bore complete all as specified and as directed.

S & F110mm dia UPVC/PVC vent cowl fixed in place of AC cowl complete all as specified and as directed.

S & F 110mm UPVC soil waste, and vent pipe in any length with rubber ring joint fixed to wall / laid in floors incl taking down of old pipes of any description complete all as specified and as directed.

S & F 75mm UPVC soil waste, and vent pipe in any length with Rubber Ring joint fixed to wall / laid in floors incl taking down of old pipes of any description complete all as specified and as directed.

S & Fix in repairs UPVC/PVC (SWR) floor trap 75mm dia plain with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1 complete all as specified and as directed.

S&F in repairs 600 mm long of PTMT towel rail fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repairs brass chromium plated Tubular towel rail 20mm dia D Type 60cm long between flanges complete all as specified and as directed.

Supply & fixed in repairs UPVC/PVC (SWR) branch piece, single (single Y or T etc) equal or unequal 110mm dia with access doors complete all as specified and as directed.

Supply & fixed in repairs UPVC/PVC (SWR) branch piece, single (single Y or T etc) equal or unequal 75 mm dia with access doors complete all as specified and as directed.

S & F in repairs 10 Ltrs capacity PVC valve less flushing cistern, low level, white, with inlet ball valve, float and handle inc brackets, inc flush pipe of PVC 32 mm dia for low level cistern, complete all as specified and as directed.

M & L for Low density waste pipe 40 mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 90 cm long suitable steel sink waste complete fixed in repairs complete all as specified and as directed.

M & L for Low density waste pipe 32 mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 75 cm long suitable for WHB/URINAL complete fixed in repairs complete all as specified and as directed.

S&F in repairs 100 mm waste coupling for sinks of any pattern complete all as specified and as directed.

S&F in repairs for 15mm bore, 45 cm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends and complete all as specified and as directed.

S&F in repairs for Stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm dia bore iron pipe or for unions, complete all as specified and as directed.

Supply and fix in repairs of brass chromium plated, health faucet with health faucet tube of 1.5 metre long and stand etc screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed.

S&F in repairs for Brass chromium plated, mixing valve for mixing hot and cold water, screwed down, screwed for 15 mm bore iron pipe complete all as specified and as directed.

S&F in repairs for Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for unions, complete all as specified and as directed.

S&F in repairs for Stops valves, cast copper alloy, chromium plated fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.

S&F in repairs Pillar taps, cast copper allay, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15 mm dia bore iron pipe complete all as specified and as directed.

S&F in repairs Bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, screwed for 15 mm dia bore iron pipe complete all as specified and as directed.

S&F in repairs Bib taps cast copper alloy with crutch handle, screwed down and screwed for 15 mm bore iron pipe complete all as specified and as directed.

S & F in repairs Brass chromium plated, angle cock, screwed of 15 mm bore iron pipe complete all as specified and as directed.

S & F in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S&F Rotational moulded polyethylene water tank triple layer (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs and S&F 20 mm bore PTMT Ball valve high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe including dismantling of existing water tank & ball valve of any description complete all as specified and as directed.

S&F Rotational moulded polyethylene water tank triple layer (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs and S&F 20 mm bore PTMT Ball valve high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe.including dismantling of existing water tank & ball valve of any description complete all as specified and as directed.

S&F Rotational moulded polyethylene water tank triple layer (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 2000 ltrs and S&F 20 mm bore PTMT Ball valve high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe including dismantling of existing water tank & ball valve of any description complete all as specified and as directed.

Demolition of cement concrete of any description and in roof padding concrete including any type of treatment complete all as specified and as directed.

Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

Material and labour for 40 mm thick plain cement concrete in 1:2:4 type B0 using 12.5mm graded stone aggregate as in padding concrete on roof tops and finishing even and fair complete all as specified and as directed.

Material and labour for roughening the old concrete roof surfaces by picking, sweeping, cleaning and washing down with water to remove dust etc and applying a coat of neat cement slurry at the rate of 3 Kilo gram per square metre complete all as specified and as directed.

Material and labour for rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 2% by weight of cement and finished even and smooth complete all as specified and as directed. NOTE:- Water proofing compound will be measured and paid separately under relevant items in this schedule.

Material and labour for sweeping with wire brushes and cleaning with water over the roof surfaces and application of one coat of water based bitumen emulsion primer at the rate of 0.3 litres per square metre after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP based polymeric membrane of weight 3.5 Kilogram per square metre and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 grams per square metre) as per IS 3384 on primed surface by forced application over roof surfaces over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per square metre over that coat of bituminous aluminium paint at the rate of 100 grams per square metre complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule

Supply only integral WPC complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0 sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 sqm & but not exceeding 2.0 sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 2.0 sqm each complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

M&L for MS framed work as in doors and chowkats or gates of angles or other section with gusset plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings (exclusive of steel sheeting or other covering) (Fe-410-w Gde-250) complete all as specified and as directed.

S&F 0.80mm thick, mild steel plain black sheeting as covering to door shutters and similar work, cut to size, edges beaded if directed, holes punched, incl riveting or welded to steel members etc with plain 40mm lap joints or welded/riveted seams incl bending, turning U, mitred angles stopped ends, outlets etc as required complete all as specified and as directed.

S&F in repairs 0.80mm thick, mild steel plain black sheeting as covering to door shutters and similar work, cut to size, edges beaded if directed, holes punched, incl riveting or welded to steel members etc with plain 40mm lap joints or welded/riveted seams incl bending, turning U, mitred angles stopped ends, outlets etc as required complete all as specified and as directed.

S&F framed work such as grills framed guard bars etc with end of bars shouldered riveted or angle into spikes framed guard bars and similar work conforming to grade Fe 290-0 Gde -E -165 complete all as specified and as directed.

S&F Steel windows with side hung double shutter (glazed shutter open out side and wire mesh shutter open inside) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and as directed.

M&L for Welding in repairs not exceeding 2.5cm in length with thickness of metal not exceeding 6mm complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from wooden/metal frame glazed with putty or fixed with beads complete all as specified and as directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty/beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty/beads in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed.

S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with stainless steel wire staples complete all as specified and as directed.

All as per item No 106 here-in-before but fixed in repairs from wood /metal frames including fixing beading complete all as specified and as directed.

S & F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including treating the back of chowkats with coal tar black paint complete all as specified and as directed.

S&F pressed steel frame of size 165 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S&F pressed steel frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

M&L for Cement concrete type B1, 1:2:4(20mm graded aggregate) as in bed plates, kerbs,copings,filling of hollow portion of ms frames etc incl necessary form work complete all as specified and as directed.

S&F 35mm thick plain factory made framed paneled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply. The size of rail and stile as per IS 1003 (Part-I0 Kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L for 35mm thick, 2nd class hardwood glazed & Skelton shutters, open rebated & prepared to receive glass, gauge, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitered beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) complete all as specified and as directed.

All as per item No 113 above but 30mm thick as in window, ventilator shutters complete all as specified and as directed.

S&F 30 mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

S&F 300mm long mild steel sliding door bolt, plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of six bolts and nuts four on bolt plate and two on staple plate etc., complete all as specified and as directed.

S&F 200mm long MS barrel tower bolt, stove enameled black with bright bolts complete all as specified and as directed.

S&F 100mm long MS butt hinges, medium weight cold rolled complete all as specified and as directed.

S&F 75mm long MS butt hinges, medium weight cold rolled complete all as specified and as directed.

S&F 150mm long MS pressed handles oval type stove enameled black complete all as specified and as directed.

All as per item No 121 above but 100mm long complete all as specified and as directed.

S & F in repairs 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete all as specified and as directed.

S&F 250mm long Aluminum alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

S&F 200mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and as directed.

S&F in repairs mild steel chromium plated curtain rod 19mm dia with fixing brackets, stops, rollers, etc. standard thickness and of any length complete all as specified and as directed.

Dismantling of ceiling boards (fiber pulp, insulation etc) on insulation boards/slabs/blankets, any thickness, including corner fillets complete all as specified and as directed.

Supply and fix anodized aluminum snap grid frame work of 605 mm x 605 mm false ceiling fixed to walls duly hanged from ceilings including adjustable supporting GI hangers of 6 mm dia fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion dash hold fasteners of 12.5 mm dia 40 mm long in SSR Part I, Section 10 Clause No 10.38 complete all as specified and as directed.

S & F 4mm thick non asbestos fiber cement buildings boards fixed or laid/inserted to timber/GI/aluminum frame work in ceiling with screws including two coats of OBD on ceiling including priming with alkali resistant paint and preparation of new surfaces complete all as specified and as directed.

S & F in repairs 12mm thick perforated particle board/tiles for insulation and acoustic purposes, 60 x 60cm fixed with staples on existing snap grid complete all as specified and as directed.

Dismantling of AC corrugated as semi corrugated sheet in roof coverings complete all as specified and as directed.

M&L for 6 mm thick AC corrugated semi corrugated sheet in roof fixed with 'J' hook in patches where ordered complete all as specified and as directed.

All as per item No 132 above but except sheet complete all as specified and as directed.

M&L for AC two peice adjustable plain wing ridge 6 mm thick fixed with 'L' hold & 'J' bolts complete all as specified and as directed.

S & F pre painted galvalume aluminum Zinc coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws including dismantling plain or corrugated steel sheets complete all as specified and as directed.

S & F pre painted galvalume aluminum Zinc coating GI based plain steel sheeting 0.5mm thick of any colour having tensile strength of 550 MPA as in ridge, gutters etc fixed with self tapping screws including dismantling steel sheets complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc. conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

S&F Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe-290 Gde-E- 165 complete all as specified and as directed.

M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, se-cured with nails or beads sectional area exceeding 13 sqcm but not exceeding 25 sqcm including two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

S&F in reapirs 18/19mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F 50mm size mild steel butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F in repairs Continuous (piano hinges width of flaps when opened 40mm) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

M/S C MALLIAH & SONS

R G NAIDU CIVIL CONTRACTOR AND BUILDERS

B AND H CONSTRUCTIONS

M/s GM Constructions

M/S DIVIJA BUILDERS

VACON INFRASTRUCTURES

Pragathi Infrastructure Co.