Providing Play materials and Chairs to the TNHB Colony Park in ward No 56 East zone

Amount

Earth work excavation of building in kind of soilsand sup soilsand full depth as may be directed by the departmental officers with initial lift and leads and cleaning and leveling the site.

Conveying the excavated earth from site to a distance of not more than 0-15Km within the city limit including loading,transportation,unloading etc complete

Cement concrete 1:4:8(one cement,four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted

Supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and BG 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed

c.Vertical Walls

Supplying,fixing and placing in position mild steel /ribbed torsteel rods for all RCC works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods)

Cement Concrete 1:1.5:3 (one cement,one and half sand and three aggregate )using 20mm gauge hard broken granite stone jelly for all RCC items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in RCC works wherever necessary as per the direction of departmental officers complete

Brickwork inCM1:5(onecement&FiveCrushedStone Sand(M-Sand) using II class ground moulded bricks of size 9"X43/8"X23/4" including finishing, curing, etc., complete complying with standard specification - 100 CFT ( Sl.No 196 b)

plastering the exposed surface of RCC works in cement mortar 1:3 mix 10mm thick following proportions at all heights and depths above or below plinth level including scaffolding curing etc. complete complying with standard specifications and drawings and as directed by Departmental

Supplying and filling the foundation and basement with stone crusher dust in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Plastering with cement motar in cm 1:5 (one cement and five sand) 12mm thick in all floors complying with standard specifications

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty,wherever required etc,complete as per standard specification. (Sl.No.404

S/Fixing fo Swing Two Seater with bit of 8'-0" above GL using 50mm Diams pipe 9swg with 3.65mm on wall thick with one coat of primer and two coats of enamel paint and seat using with paddale wood with polishing

Spiral Slide Senior FRP: [Component]Ladder :Galvanished ‘B’ Class pipeSlide : FRP Spiral slide BED LEG :Galvanished ‘C’ Class pipe [Measurement] Height :6 ½ ft.FRP thickness 6mm. (Reinforced Polymers in 7 Layers) 450 CSM Matt, 600 Roving mat, Isotolic gel coat with UV pigment. Painting with PU coating.width :10ft [Required area] Product area: 6’ft * 10’ft Play area :8’ft * 15’ft 5 CPE-(s.No:56.p:NO:218 CMDA)

S/fixing of Park Bench of (Integrated seat and back) 25mm B class conforming to IS 1239 latest PU coated with the layer of thickness 60 microns as per direction of departmental officers

S/fixing of twin Sea Saw two seater of 6'-0" length and 4'-0" height using 50mm G.I. pipe with two coats of enamel paint over one coat of primer and platform using 1: paddale wood with polish as per direction of departmental officers

Supply and fixing of Merry Go round using M.s pipe of 50 dia and 4mm length of 1.80m height as central pipe and bearing assembly outer pipe size of 125mm dia and 8mm thick and the unit should be assembled to a length of 250mm. The mwerry go round of 6seat approved by the executive engineer before use on work