SPECIAL REPAIR TO BLDG NO TO 228 TOILET AND BATHROOM OF BLDG NO P 556 INCLUDING CONNECTED SEWAGE SERVICES BATHROOM BLOCK OF BLDG NO TO 8 AND SR TO BLDG NO TO 508 509 510 UNDER GE 865 EWS

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and as directed.

S & F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square n ot exceeding 0.5 Sqm in each pane complete all as specified and as directed

M&L for preparation of old decorated plastered/unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, and efflorescent salts and trading oil and greasy spots and applying two coat of white washing complete all as specified and as directed.

Material and labour for two coat of white wash on old white washed surfaces of ceiling including preparation complete all as specified and as directed by Engr-in-charge.

S&F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with linlet,ball valve, float and handle including brackets,flushing pipe including of brackets as specified and directed by EIC.

S &F in repairs Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F in repairs, 15mm bore, PVC connection pipe 450 mm long with PTMT nuts at both ends complete all as specified and as directed.

S & F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins complete all as specified and as directed.

S & F in repairs 15mm bib taps with chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed down, screwed for iron pipe or for brass ferrule and fixed as specified and directed by engr - in charge.

S & F in repair 15mm bore stop valves, chromium plated with long shank and cup (concealed Each type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in repair grating 125MM dia with waste hole of PTMT complete all as specified and as directed.

M&L Dismantling of cast iron /PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia

S&F 110mm dia bore PVC pipes single socketed having compressive strength 655 - 675 Kg/Cm2 , in any length with rubber ring joints , laid in trenches or in floors including PCC 1:4:8 type D-2 (using 40mm draded aggregate) bed to drain complete all as specified and directed by Engr-in-charge.

S&F PVC reducer of 110mm dia complete all as specified and as directed.

S&F PVC reducer of 75mm dia complete all as specified and as directed.

S&F PVC (SWR) T (Single T) of 110mm dia complete all as specified and as directed.

S&F PVC (SWR) T (Single T) of 75mm dia complete all as specified and as directed.

S & F in repair towel rail 600mm long or PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (min wt 190 Go ms) complete all as specified and as directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

All as per item No 22 above but except blocks.

M&L Walling of random rubble uncoursed stone masonry, uncoursed well bonded laid dry in retaining wall abutment and similar work complete all as specified and as directed.

M&L Walling of random rubble stone masonry, uncoursed well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed.

M&L Excavation over area n exc 1.50 m deep and getting out in hard/dense soil for Septic tank , Manhole complete all as specified and as directed.

M&L Excavation over area exc 1.50 m deep and n exc 3.00m in depth and getting out in hard/dense soil complete all as specified and as directed.

M&L Returning,filling in ,including spreading,levelling ,watering and well ramming in layers not exe 25cm in hard/dense soil complete all as specified and as directed.

M&L Removing excavated soil material n, exe 50m and depositing where directedat a level n, exe 1.5 m above the starting poit complete all as specified and as directed.

M&L Demolition of concrete of any description and in any position not otherwise complete all as specified and as directed.

M&L PCC 1:2:4, type B-1(using 20mm crushed stone graded aggregate) as in coping, benching etc including necessary chamfering, weathering, throating etc and including forms works and set in cement mortar 1:6, complete all as specified and as directed.

M&L RCC 1:2:4, type B1 (20 mm grade aggregate ) as in foundations, including rafts, footings, foundations beams : plinth beams: bases for column, etc " basement slabs , under reamed piles ad mass concrete complete all as specified and as directed.

M&L form work to to edges of concrete flat n exc 20 cm wide rough finished complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick works finished even and smooth with water proofing compound 3% of cement without using extra cement in cement mortar 1: 4 complete all as specified and as directed Note : Rate includes material for water proofing compound complete all as specified and as directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slabs and the like position set in cement mortar 1:6 complete all as specified and as directed (reinforcement shall be measured & paid separately.

M&L Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for sewage line, septic tank, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

M&L for PCC 1:4:8 , type D -2 (40mm gradded aggergate) bed to drain pipe 150mm dia pipe incl packing under and haunching against the side of pipe after they are laid and tested complete all as specified and as directed.

S&F 150mm dia bore (inner dia) double wall corrugated HDPE pipe (SN 8) in any length including all fittings and jointing with eastomeric rubber link and cuppler/other jointing materials laid in trenches or in floor all as specified and directed . Make ALOMK/GEMNI/REX or equivalent complete all as specified and as directed.

M&L Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, includinguding cover fillets all as specified and directed.

M&L for wooden floor tiles 7mm thick with dove tailed joints laid over 150 micron polythene film and 3mm thick foam as per maufacturer's instructions, including taking down of old Wooden flooring and fixed with decorative wooden beadings as per site requirement complete all as sfd and directed Make and shade of tiles be all s approved (Action teas) complete all as specified and as directed.

M&L Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L Preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer including balance area complete removal complete all as specified and as directed.

M&L Preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed

M&L Preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer 2mm thick wall care Putty on wall to obtain smooth finish etc including balance area complete removal.

M&L Taking down chowkhat or frame with shutters (without taking of shutters from the frame) exe 1.5 sqm each but n. exc 4 sqm each any type of door (wooden , aluminium & Steel etc) complete all as specified and as directed.

M&L for Flush shutters 30mm thk, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F MS flat iron as in hold fast etc and similar work complete all as specified and as directed.

M&L PCC 1:3:6 type C1 (20mm gr agg) as in anchoring hold fast etc bed plate etc complete all as specified and as directed.

M&L Preparing surfaces of any description not otherwise described over 10 cm width or girth of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed complete all as specified and as directed.

S&F Aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and as directed.

S&F Aluminium handles, 150mm fabricated type anodised complete all as specified and as directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F Plain glass panes of 3 mm thick glazing with wooden bead in squares not exe 0.5 sqm in each pane for glazed and skeleton shutter complete all as specified and as directed.

M&L Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

M&L for Complete removal of existing finishes on wall and applying two coats of Appx exterior emulsion paint (Asain paint) on wall surfaces complete all as specified and directed

M&L for Preparation of old distemper surface by washing, rubbing down and stopping of distemper and painted surface and applying one coat of oil bound emulsion on wall surfaces white or tinted complete all as specified and as directed.

M&L for Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed.

M&L 100mm thick for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in sub sub base complete complete all as specified and directed

M&L for Dismantlng framed wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton unframed work complete all as specified and as directed.

M&L for Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed

M&L for Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge.

M&L for Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge.

M&L for Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed

M&L for Demolition of Reinforcement cement concrete in any description and any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

Ditto all as item Ser No 14 above but on ceiling complete all as specified and as directed

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.

M & L for 75 mm PCC 1:2:4 type B-1 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement complete all as specified and as directed.

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection complete all as specified and as directed.

M&L for PCC type D2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation complete all as specified and as directed.

M&L for 10mm thick rendering on other than fair faces of Stone wall works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed

S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.

S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats , complete all as directed by Engr-in-charge.

S&F for 30mm thick 2nd class hard wood plain framed factory made glazed and skeletion window shutters , open rebated and prepared to receive glass , gauze etc (without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR part I, Section 8 , clause 8.24(a) supplied and fitted to chowkats , complete all as directed by Engr-in-charge.

S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixings lugs,excluding hinges,lock strike plate,etc,complete ,as specified ,supplied and fixed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized complete.

S&F stainless steel butt hinges, medium weight cold rolled 100 mm size 100 mm size complete all as specified and as directed.

S&F 75mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.

S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed

M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor complete all as directed by Engr-in-charge.

M&L Glazed ceramic coloured tiles in vertical surfaces (350 X 250X7mm ) / (450x350x7mm) thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over rendering 10mm thick in CM (1:4) , for dado/skirting tiles.complete all as specified and as directed by the Engr-in-charge.

M&L Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:4 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match, complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 and nexc .11 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the 15mm thick screed bed with CM (1:4) laying floor tiles complete all as specified and directed.

Dismantling water tank exc 250 & n exc 500 litre and removing to storel all as specified.

S&F rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories, all as specified.

Taking up or down 15 mm bore steel tubing and connections and set aside for re-use or removal to store

Taking up or down 25/32 mm bore steel tubing and connections and set aside for re-use or removal to store

S & F 15mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge)

Description all as per above item 95 but 25 mm bore pipe .

Description all as per above item No 95 but 32 mm bore pipe

S&F viterous China squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern as in repairs incl bedding with p.c.c type B-I 1:2:4 , using 20 mm graded crushed stone aggregate.

S&F PVC connectons 15 size with PTMT nuts (length 600mm) complete all as specified and directed.

S & F in repair Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.

S & F in repairs, 32mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and as directed.

M&L for Cement concrete type B-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc.. complete all as specified and as directed.

M&L for Chequred cement concrete tiles (glazed) 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.

S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws acomplete all as specified and as directed.

Ditto all as item No 124 above but except sheeting any thickness.

S&F Pre painted galvalumealuminium zinc coating GI based Plain steel sheet 0.50mm thick as in ridges , valley gutters drip etc of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed.

M&L for Reinforcement cement concrete (Nominal Mix) in type B1 1:2;4 ( 20mm graded aggregate) as in slabs supported of walls , beams and columns in floors, roofs, landings, balconices , canopies , deck slabs and in shelves etc complete all as specified and as directed

M &L for form work to soffits of suspended slabs flat type such as roof slabs , floor slabs , landings and similar work nto exceeding 200mm thick (Horizontal or slopping etc complete all as specified and as directed

M&L mild steel TMT bars 10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bar complete all as specified and as directed.

S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed by Engr-in-charge.

S&F PVC (SWR) 'S’ trap of 125/110 mm bore complete all as specified and as directed.

M&L for PVC (SWR) pipe single socketed, 110mm soil, waste and rain water dranage pipes laid in trenches and jointed all as specified including dismantling etc complete all as specified and as directed.

S/F 75 mm dia (SWR) bend any redius complete all as specified and as directed.

S*F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

M&L for Cast iron Nahani trap 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.

S/F 110 mm dia (SWR) bend any redius complete all as spd complete all as specified and as directed.

M&L for PVC (SWR) pipe single socketed, 75mm dia soil, waste and rain water dranage pipes laid in trenches and jointed all as specified including dismantling etc complete all as specified and as directed.

M&L for PCC 1:4:8 TYPE D-2 (40mm gradded aggergate) bed to drain pipe incl packing under and hanching against side after they are laid and tested up to 110mm dia pipe including dismentling complete all as specified and as directed.

M&L for PVC (SWR) pipe single socketed, 75mm dia soil, waste and rain water dranage pipes fixed to walls all as specified including dismantling etc .complete all as specified and as directed.

S&F in repair 15mm bore dia bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 15-mm 110 gms) complete all as specified and as directed.

S&F in repair 15mm bore dia pillar tap of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms/20-mm 125 gms) complete all as specified and as directed.

S & F in repairs, 15 mm bore, stop valves standard of PTMT any colour high pressure screwed for iron pipes and fixed (Min Wt 15mm-90 Grams) complete all as specified and as directed.

S & F in repairs, 15 mm bore, angle stop valves of PTMT any colour high pressure screwed for iron pipes and fixed (Min Wt 15mm-90 Grams)

M&L for preperation of new plastered wall surface of any description and applying three coat of white wash complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applying two coat of white wash complete all as specified and as directed.

M&L for preperation of old wooden surface surface any description over 10cm in width or girth and applaying one coat of synthetic enamal paint all as specified and as directed complete all as specified and as directed.

M&L for preperation and removal of old Steel / CGI Sheet surface any description over 10cm in width or girth and applaying two coat of synthetic enamal paint all as specified and as directed complete all as specified and as directed.

S&F in repair 25 mm ball vales high presure of PTMT with epoxy coated aluminium rod and highdensity platic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 25 mm outer dia PPR gate vales (Brass insert ) confirming to ISO 2000 high presure with epoxy coated aluminium rod and highdensity platic ball screwed for PPR pipe or for union and fixed complete all as specified and as directed.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugations side lap fixed with coach screws and washer in roofs wall ets with grade of zine coating 275 complete all as specified and as directed.

All as per item No 132 above but except sheeting

S&F 0.63 mm thick plain galvanised corrugated mild steel sheeting as in rieges hi, valley gutters drip and straight flashings (lenglth an girth as fixed) with L or J hooks with coach screws and washer in roofs wall ets with grade of zine coating 275 complete all as specified and as directed.

M&L preparation of new or previously untreated steel/CGI sheet surfaces exc. 10 cm width/ firth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface complete all as specified and as directed.

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:-

S&F One light/exhaust fan point controlled by one way switch complete all as specified and directed by Engr -in-charge.

S&F One switch socket outlet 6 Amps, 230 volts point on Same board complete all as specified and directed by Engr -in-charge.

S&F One switch socket outlet 6 Amps, 230 volts point on independent board complete all as specified and directed by Engr -in-charge.

All as item No 137 above, but using cables 4 Sq mm size complete all as specified and directed by Engr -in-charge.

All as per ser No 137 here-in-above but using cables 2.5 Sqmm size complete all as specified and directed.

Supply and fixing in replacement of lamp holder insulated body with back plate complete all as specified and directed by Engr -in-charge.

Supply and fixing in replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and directed by Engr -in-charge.

Supply and fixing in replacement of Socket combination out let 5 pin 6 Amps flush type 230 volts complete all as specified and directed by Engr -in-charge.

Supply and fixing in replacement of switch Socket out let 5 pin 6 Amps flush type.230 volts complete all as specified and directed by Engr -in-charge.

Supply and fixing in replacement of switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as specified and directed by Engr -in-charge.

Supply and fixing in replacement of Ceiling rose, surface Bakelite three terminals 230 Volts complete all as specified and directed by Engr -in-charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 4 Ways complete all as specified and directed by Engr -in-charge.

Supply and fixing in replacement of Air circulator PVC body 450 mm sweep complete all as specified and directed by Engr -in-charge.

Supply and Fixing in Replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr -in-charge.

Supply & Fixing in Replacement of LED light fitting 1X9 W/ 1X 10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr -in-charge.

Supply & Fixing in Replacement of connecting and testing LED security light fitting 35 watt, 230 volt AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver , clamp and bracket with impact and corrossion resistant incl thermal management in multiple optics complete all as specified and directed by Engr -in-charge.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600mmx6mm thick buried directly in ground. 9Earth pit not less than 2.25 deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to gavanized iron strip 25 x 4 mm by GI watering pipe 15 mm with funnel and wire mesh and 40 mm dia protection pipe earth work etc complete all as shown in electrical plate no 5 of MES plate No 6 complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of old U/S decorative durable LED batten fitting of 18/20 W , 4 feet long with decorative and caps, power coated CRCA decorative for LD tube of any capacity , 4 feet long (white colour) tube having driver, connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulatd and overall sheathed flexible copper conductor cable of size 07.5 sqmm 3 core all as specified and directed by Engr -in-charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 Ways complete all as specified and directed by Engr -in-charge.

Supply and fixing in replacement of MCB SPN 40 to 63 Amp 240 Volts AC ISI marked complete all as specified and directed by Engr -in-charge.

Supply and fix in replacement of MCB SP 5-32 Amps. 240 Volts AC ISI marked complete all as specified and directed by Engr -in-charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways complete all as specified and directed by Engr -in-charge.

S&F Sub main wiring with two run of 6 Sqmm (2x 6 Sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6 Sqmm (1x 6 Sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x 6 Sqmm), one run of 6 Sqmm (1x 6 sqmm) cable and one metre of PVC casing caping will be measured as one unit.

S&F exhaust fan made of sturdy engineering plastic complete withlouvers shutter, voltage 230 V, 50 Hz, RPM 1200, copper winding of sweep 300 m complete all as specified and directed by Engr -in-charge.

Supply and fixing in replacement of sheet metal enclosure with 20 Amp 240 V socket plug top and MCBs single pole and neutral enclousre with two pin and earth plug and socket with one single pole 20 Amp MCB complete all as specified and directed by Engr-in-Charge.

M/S MOHD MUSSA

BETONG BUILDERS

M/S SONAM RIGZIN

Takshos Enterprises

M/S MOHD KARIM

MS SHOWKAT ALIJOO