REPAIR/MAINT OF SUNKENFLOOR, SANITRY FITTINGS, PLUMBING WORKS, CLEANING OF WATER TANKS AND ALLIED WORKS, REPAIR/MAINT OF DAMAGED FLOOR, WALL TILES, JOINERY AND ALLIED WORKS, REPAIR/MAINT INCLUDING REPLACEMENT OF DAMAGED/ UNSERVICEABLE LIGHT FITTINGS

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level), incluuding removing of demolished materials n. exc. 100m from site of work and deposited where directed, complete all as specified and directed

M & L 75mm thick PCC (1:4:8), type D 2 (using 40mm graded crushed stone aggregate) as in sub bases, floors and pavings etc, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed

M&L for chequered cement concrete tiles 30cm x 30cm x 25cm thick set jointed and pointed in near cement slurry with gray cement and pigments, in floors, over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed

M&L for 60mm thick machine pressed precast concrete coloured interlocking paver block, any shape and size, fixed with grey cement and pigment confirming to IS 15658-2006, M-35 grade over and including 50mm thick (consolidated thickness) sand filling including watering and consolidation, complete all as specified and directed.

M&L 75mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n. exc. 2 Sqm each) and finished even and smooth without using extra cement and providing joints troughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

M&L for PCC (1:2:4) type B-0, (using 12.5mm graded crushed stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, complete all as specified and directed.

Demolition of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid dry or pointed, complete all as specified and directed.

M&L for brick work with, sub class 'B' bricks, old size, burnt clay bricks, laid flat and bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3) in drains, channels, kerbs etc, complete all as specified and directed.

All as per item No 9.00 here-in before but except bricks, complete all as specified and as directed. Note-(i) Bricks obtained from demolition shall be re-used. (ii) The quoted rate shall deemed to be included for cleaning of old bricks obtained from demolition.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement, complete all as specified and directed.

Demolition of un-reinforced cement concrete of any description not otherwise specifically provided for and in any position disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.

Cleaning the surfaces of brick/RCC using wire brush , brooming down and washing down with water to remove dust etc. and brushing with neat cement slurry @0.5 kg/sqm with acrylic based polymer modified cementitous composite (as approved by Engr-in-charge) @ 0.50 kg/sqm, complete all as specified and directed.

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed.

M&L 10mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:3) using water proofing compound as per manufacturer's instructions, in sunken portion, complete all as specified and as directed.

M&L for PCC (1:5:10) type E-2 (using 40mm graded crushed stone aggregate) as in sunken portion, complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in sunken portion, complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately)

M&L for rendering 5mm thick on fair faces of ceiling surfaces, in CM (1:3), finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces on ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces on wall and applying three coats of white wash, complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls etc and applying two coats of distemper oil emulsion over a coat of chalk whiting primer, complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350 x 250x 7mm/450x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering back coat in CM (1:4), complete all as specified and directed.

S & F in repairs, vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe, CI anti-syphonage pipe etc including making good to disturbed surfaces of floor to match with existing floor, complete all as specified and directed.

S & F in repair vitreous china wash down water closet (pedestal), white (EWC) including plastic seat of same colour of WC, closed patttern with flat bottom, and cover and mild steel chromium plated hinging device, complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed.

M&L 75mm dia cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4), compelete all as specified and directed.

S&F in repair 10 Liters capacity, low level flusing cistern, PVC, white, with and including inlet ball valve, float, handle, 32mm dia flush pipe of polyethylene of low or high density or PVC including brackets and connection to pipe, complete all as specified and directed.

S&F in repairs 32mm dia, flush pipe of polyethylene of low or high density or PVC for low level flushing cisterns, complete all as specified and directed.

S & F 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

S&F galvanized steel water tubing and connection, medium grade, 15mm bore with all fitting, fixed concealed to wall or in ceiling complete and making good surfaces with CM (1:3), complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S & F 20 mm bore galvanized steel water tubing, medium grade with all fittings and connection complete for flush pipes, water supply pipes etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Re-fixing old steel tubing and connection, 20mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

S&F in repair 15mm bore, stop valves, fancy type, chromium plated, with long shank and cup concealed type, cast copper alloy, screwed down, high pressure screwed both ends for iron pipe or union and fixed, complete all as specified and directed.

S&F in repair 15mm bore angular stop cock, cast copper alloy, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15mm bore, stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or union and fixed, complete all as specified and directed.

S&F in repair 15mm bore bib taps, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, compelete all as specified and directed.

S&F in repair CP pillar tap, 15mm bore, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F in repair towel rail, 60cm long PTMT (minimum weight - 190 gms) fixed with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed

S&F in repair shower rose 125mm size, brass, chromium plated, with or without swivel joints, long arm for fixing with 15mm bore pipe or union, complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550 x 400mm including 32mm bore PVC waste pipe, 800mm long, waste coupling including cutting for and pinning in ends of brackets etc, complete all as specified and directed.

S&F in repair 32mm bore PVC solid waste pipe for wash hand basin and urinal etc. 800mm long, complete all as specified and directed.

S&F in repair 40mm bore PVC solid waste pipe for wash hand basin and urinal etc. 800mm long, complete all as specified and directed.

S&F in repair sinks made of stainless steel with drainage board 1mm thick (SS-304) with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe & coupling 32mm, complete all as specified and directed.

S&F in repair sinks made of stainless steel without drainage board 1mm thick (SS-304) with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 410mm bowl size 410mm x 330mm x 160mm including waste pipe & coupling 32mm, complete all as specified and directed.

S&F stainless steel kitchen plate rack of size 0.75 x 0.78m (minimum) standard quality (SS-204), 0.85mm thick, weight not less than 6 kg, fixed with brass screw, complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (minimum weight - 210 gms), complete all as specified and directed.

S & F in repair 15mm bore pillar taps, of PTMT any colour high pressure, screwed for iron pipe and fixed (minimum weight - 110 gms), complete all as specified and directed.

S & F in repair 15mm bore stop valves, of PTMT any colour, high pressure, screwed for iron pipe and fixed (minimum weight - 90 gms), complete all as specified and directed.

S & F in repair 15mm bore, angle stop valves of PTMT any colour high pressure, screwed for iron pipes and fixed (minimum weight - 90 gms), complete all as specified and directed.

S&F in repair tank cover suitable for any type of rotational moulded polyethylene water storage tanks, complete all as specified and directed.

S&F in repairs 20mm bore gun metal, globe or gate valve, ISI marked, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repair waste coupling of PTMT suitable for wash jand basin (half or full threaded) (Minimum weight -45 gms) for 32mm bore discharge pipe, complete all as specified and directed.

S&F in repair waste coupling of PTMT suitable for kitchen sink (half or full threaded) (Minimum weight -60 gms) for 40mm bore discharge pipe, complete all as specified and directed.

S & F in repair vitreous china urinal, bowl type flat back of size 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity (exc. 250 & n. exc. 500 ltr), and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on dd/mm/yy" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity (exc. 500 & n. exc. 1000 ltr), and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on dd/mm/yy" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank of any capacity, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old unserviceable water tank of any capacity, complete all as specified and directed.

Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but n. exc. 2 sqm each and refixing in same opening, complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) n. exc. 1.5 Sqm each., complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutter from the frame) exc. 1.5 Sqm but n. exc. 4 Sqm each, complete all as specified and as directed.

Resecuring or easing and adjusting without taking down shutters of any description n. exc. 1 Sqm each, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each, complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in bed plates, filling in MS pressed door frame etc, complete all as specified and directed.

S&F 125 x 60mm size factory madepressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawings, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of both side Prelam PVC sheet used instead of Plain colour PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F for 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

M&L 35mm thick 2nd class hardwood factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particale board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 35mm thick factory made 2nd class hardwood glazed and skelton door shutters of open rebated and prepared to receive glass edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, complete all as specified and directed.

S&F second class hard wood boarding, 15mm thick, clean sawn with butt joints, fixed with nails in any situation, as shelves of built-in-cupboard including replacement of old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc, complete all as specified and as directed.

S&F in repair 100mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair 200mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed.

S&F in repair 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair 75mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair 100mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair 150mm long extruded aluminium alloy handle, cast type, anodised, complete all as specified and directed.

S&F in repair 100mm long extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F steel windows with side hung (ISI marked), factory fabricated, shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed.

S&F steel windows with side hung (ISI marked), factory fabricated, shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/ painting required, complete all as specified and directed.

S&F steel ventilator with top hung shutter (ISI marked), factory fabricated, including hinges steel peg stay, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed.

M&L for sheet glass, 3mm thick, ordinary quality and glazing with oil putty in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed.

All as per item No. 100.00 here-in-before but frosted on one side, complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks or galvanized wire staple in repair including wooden beads, complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks or galvanized wire staple, complete all as specified and directed.

S&F in repair for 18mm thick wooden grain PVC celuka ply fixed in shutters built-in cupboards, almirahs, book cases, toilet boxes and similar work fixed with screws/self tapping screws (including stainless steel handle, piano hinges, hasp & staple) etc, complete all as specified and directed.

S&F in repair for 25mm thick wooden grain PVC celuka ply fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work fixed with screws/self tapping screws etc, complete all as specified and directed

S & F in repair continuous (piano) hinges,mild steel, width of flap 30mm (when open) bright finish or electrogalvanised, complete all as specified and directed.

S&F in repair curtain rod 25mm dia, mild steel chromium plated including CP bracket and other accessories for fixing of 25mm dia curtain rod to wall, complete all as specified and directed.

M&L for sub main wiring with two run of 6 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable (FRLSH) 1100 Volt grade, drawn through and including PVC casing caping (ISI marked) including all accessories and one run of 6 Sqmm single core PVC insulated unsheathed (FRLSH) copper earth continuity conductor including taking down old unserviceable sub main wiring, complete all as specified and directed. (Note : Two runs of 6 Sqmm single core cable with one run of earth continuity conductor including PVC casing caping and its accessories shall be measured and paid as one length).

S&F in repair switch piano flush button single pole, one way 6 amps 240 volts, complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin 6 Amp, flush type, complete all as specified and directed.

S&F in repair switch and socket combination 2 in 1, 3 pin 6Amp flush type, complete all as specified and directed.

S&F in repair switch and socket combination 3 pin, 16 Amp, flush type, complete all as specified and directed.

S&F in repair fan regulator, deluxe rotary step type, complete all as specified and directed.

S&F in repair bell electric, heavy duty, ding dong type, 240 volt, single pole, complete all as specified and directed.

S & F in repair angle lamp holder, PVC/polycarbonate type, complete all as specified and directed.

S&F in repair ceiling rose, surface bakelite PVC/ polycarbonate, isolated body with three terminals, complete all as specified and directed.

S & F 20 Watt tube light fittings, LED batten with square profile extruded and polycarbonate frame, connecting up with and including three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length including taking down old unserviceable light fitting, complete all as specified and directed.

S & F 10 Watt tube light fittings, LED batten with square profile extruded and polycarbonate frame, connecting up with and including three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5m length including taking down old unserviceable light fitting, complete all as specified and directed.

S & F in replacement of 40 Watt tube light fittings, LED batten with aluminium housing & integrated electronic driver square profile extruded connecting up with and including three core flexible copper conductor cable of suitable size from ceiling rose upto 1.5m length, complete all as specified and directed.

S&F in replacement recessed mounted LED light fittings 36 watt (size 2' x 2'), white/warm white colour (4500 K to 6500 K) ultra modern LED edgelit luminaire 600mm x 600mm suitable for armstrong/grip/POP ceiling, hight upto 18m, complete with seperate electronic driver and high brightess LED including LED lamp and connecting up with and including three core 2.5 Sqmm upto nearest point, complete all as specified and directed.

S&F in replacement recessed mounted LED light fittings 18 watt (size 1' x 1'), white/warm white colour (4500 K to 6500 K) ultra modern LED edgelit luminaire 600mm x 600mm suitable for armstrong/grip/POP ceiling, hight upto 18m, complete with seperate electronic driver and high brightess LED including LED lamp and connecting up with and including three core 2.5 Sqmm upto nearest point, complete all as specified and directed.

S & F LED bulkhead light fitting 10 Watt, pressure die cast aluminium housing, IP 65 complete with electronic driver and connecting up with and including three core flexible copper conductor cable of suitable size from ceiling rose including taking down old bulk head fittings, complete all as specified and directed.

S&F in repair plug top, 15 Amps, complete all as specified and directed.

S&F in repair bell push, flush type, 6 Amps, complete all as specified and directed.

S&F MCB distribution board (DB), SPN with sheet metal encloser, double door, IP 43 protection & IK 09, 240 volts, 4 way, as per IEC 61439-3 with necessary lugs for incomming and outgong connections, fixed on wall, single pole and neutral, with 200 Amps rated busbar (as per OEM), neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any rating, complete all as specified and directed.

All as per item No 127.00 here-in before but SPN, 8 way, complete all as specified and directed.

All as per item No 127.00 here-in before but SPN, 12 way, complete all as specified and directed.

S&F MCB distribution board (DB), TPN with sheet metal encloser, double door, IP 43 protection & IK 09, 240 volts, 4 way, as per IEC 61439-3 with necessary lugs for incomming and outgong connections, fixed on wall, single pole and neutral, with 200 Amps rated busbar (as per OEM), neutral link for fixing MCBs/Isolators including taking down old unserviceable MCB DB of any rating, complete all as specified and directed.

S&F in repair MCB Single Pole (SP) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, as per IS/IEC 60898-1, fixed in proper position, complete all as specified and directed.

S&F in repair MCB Single Pole & Neutral (SPN) of capacity 6 to 32 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, as per IS/IEC 60898-1, fixed in proper position, complete all as specified and directed.

S&F in repair MCB Tripple Pole (TP) of capacity 40 to 63 Amps, 240 volts/415 volts, breaking capacity 10 KA, ‘C’ series, as per IS/IEC 60898-1, fixed in proper position, complete all as specified and directed.

S&F in repair MCB Tripple Pole Neutral(TPN) of capacity 40 to 63 Amps, 240 volts/415 volts, breaking capacity 10 KA, ‘C’ series, as per IS/IEC 60898-1, fixed in proper position, complete all as specified and directed.

S&F in replacement of blanking plate suitable for DBs/modular box, complete all as specified and directed.

S&F in repair LED lamp 9/10 watt, B22 base, complete all as directed.

S&F in replacement decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with and including 9/10 Watt LED lamp, B22 base, complete all as specified and directed.

Note: An amount of Rs.45,022.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

CONSTRUCTION SHELTER (BID ID -3366320)

M/S BIJAY KUMAR SHIVA (BID ID -3366405)

SHRI SURAJIT SIKDER (BID ID -3366510)

M/S. KUMAR CONSTRUCTION CO. (BID ID -3366273)