Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.5 L
EMD Value
₹16,300
Closing Date
22 Jan 2024, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
S M KOLI JE
Construction of samudaya bhavan at VPC No 460/A in Nirvaanhatti village of Hukkeri taluka
RDPR/2023-24/BD/WORK_INDENT240/CALL-2
RDPR/2023-24/BD/WORK_INDENT240/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Chikkodi
6 documents required · 6 mandatory
Department Registration Details
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing work
List of works for which tenders already submitted
Banker Details
Annual Turnover Certificate from CA from 2018-19 to 2022-23
PWD Department The Tenderer should possess valid registration Certificate as mentioned in KW docu
SIMILAR NATURE OF WORK DONE CERTIFICATE 50 PERCENT
LINE OF CREDIT 30 PERCENT OF ESTIMATE COST
OTHER RELATED DOCUMENT
₹500
₹16,300
12 Jan 2024
12 Jan 2024
24 Jan 2024
18 Jan 2024
Construction of samudaya bhavan at VPC No 460/A in Nirvaanhatti village of Hukkeri taluka
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mix...
As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate as per table below Foundation upto Plinth All other types c...
Columns & Piers complete with all lead and lifts etc., complete as per direction of the Engineer-in-charge of the work.
Beams & Lintels of Building complete with all lead and lifts etc., complete as per direction of the Engineer-in-charge of the work.
Roof (Straight & Arched) complete with all lead and lifts etc., complete as per direction of the Engineer-in-charge of the work.
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) complete with all lead and lifts etc., complete as per direction of the Engineer-...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing ...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, o...
Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...
Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade COPPER conductor flexible multistrand FRLS PVC insulat...
2.1.2) Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch complete with all lead and lifts etc., complete as per direction of the Engineer-in-charge of the work.
2.1.3) Long point above 6Mtr up to 10Mtr from tapping point to out let via switch complete with all lead and lifts etc., complete as per direction of the Engineer-in-charge of the work.
Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiri...
Supply and fixing of bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches. as per IS 1293 and IS 3854, Group A 32Amps Flush / ...
Supply and fixing of bakelite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/nitches. as per IS 1293 and IS 3854, Group A Electronic step...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. Etc as required. 25mm complete with all lead and lifts e...
Supplying and fixing PBBC/ bakelite straight or slant batten holder and wiring, within 60w/230 Volts lamps. complete with all lead and lifts etc., complete as per direction of the Engineer-in-charge o...
Supplying and fixing cast Aluminium round or oblong type bulk head fitting with GI wire guard, glass cover with 60/100 watts 230V GLS lamp. complete with all lead and lifts etc., complete as per direc...
Supplying patti type fluorescent tube light fitting of 4' - suitable for 28 watts fluorescent tube fitting, made out of M.S sheet and stove enameled with HF Electronic Ballast locking type brass contr...
Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, requ...
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden ...
10x8x1.5 complete with all lead and lifts etc., complete as per direction of the Engineer-in-charge of the work.
15x12x2 complete with all lead and lifts etc. complete as per direction of the Engineer-in-charge of the work.
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete. 16Amps complete with all lead and lifts etc., complete as pe...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...
Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring 1.5 sqmm complete with all lead and lif...
Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring 2.5 sqmm complete with all lead and li...
Wiring for lighting/power circuit using one of PVC insulated 1100v grade, multistrand Copper conductor single core cable in open or concealed system of wiring . 1 sqmm complete with all lead and lif...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...
Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class.(68/4)Class A PVC Cable 2 core 10 sqm...
Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete.complete with all lead and lifts etc., complete as per direction of the...
Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. In existing trench / duct. 6 sqmm to 16 sqmm compl...
Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/Bends/End-caps of same materials in exisiting trench as per IS 14930 part -II su...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1 NEWWWWW000102022.xls
Tender Document • 0.16 MB
KW1 NEWWWWW000102022.xls
Tender Document • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .